HP_RECOVERY D: drive has turned red

The Computer is a HP Pavillion dv9500. s/n [Edited for Personal Information] p/n 6Z959EA#ABU
The HP_RECOVERY D: drive has turned red it is showing 400MB free of 6.19GB
I have followed instructions found in other threads and made the files visible, however I cannot find any files relating to "backup" (or files that may not be related to recovery) and therefore am very cautious about moving or deleting any thing for fear of bigger problems.
Can you advise what other steps I may take to get the drive back in the blue
With Thanks in advance

pedrocoche
Welcome to the HP Community Forum.
Please Click Options next to your Post > click Edit > and remove the Serial number from your post.
Click "Post" to repost the contents. You do not want to post private information here. Thanks.
I cannot help you with your older system -- at least not specifically for the contents in the Recovery folder.
I can show you the kinds of files you might expect to see in a newer Recovery partition so you can get an idea whether you have accidentally stored files of your own into your Recovery partition. If you have placed personal files into the Recovery partition, you can carefully remove them.
The types of files you might expect to see are listed under the "Name" column. The dates of the recovery files, although not shown in this example, would ordinarily reflect those dates from when the computer was new -- or near its last install or recovery date.
I hope this helps.
Click the Kudos Thumbs-Up to show you appreciate the help and time from our Experts.
Although I strive to reflect HP's best practices, I do not work for HP.
Click Accept as Solution when the Answer is a good Fix or Workaround!
Kind Regards,
Dragon-Fur

Similar Messages

HP Recovery Drive has turned red.

Hp Pavilion Kikuyu Prod. No. EXCUSEA#ABA windows 7 home premium The recovery D is showing in Red Iamb free of 12.6 KGB.Can you advise me on how this has happened and how to correct it? I have never had to use the recovery option.

Just a couple of things that may help. A user in this post thought along the same lines as i am. Read the post at the bottom. The customer never attempted a backup or intentionally/ knowingly put any files in the recovery partition but it was red If you are receiving alerts/ errors about low disk space or just did a backup or both, these support documents can help. Disregard if not. Click HereClick Here

The footage has turned red at the bottom. Anyone know how to fix this?

My footage has turned red at the bottom. Anyone know how to fix this? I cannot play it either.

If the screen doesn't rotate on your iPhone, iPad, or iPod touch - Apple Support
Link is to a screenshot of the screen rotation feature toggle.

Files have turned red

I've just upgraded to 09 and every page on iWeb has turned red, on both of my computers. I have tried uploading twice to MobileMe. Both times, after an hour or more, I'm told that the site can't be uploaded at this time.
Has this happened to others, I wonder? And does anyone have a solution please?

None of the suggestions offered here, while definitely worth trying, have helped me. Installing & launching iWeb 3/'09 instantly caused all pages and sites to go red, forcing me to re-publish everything.
Why a version upgrade would force a complete republishing of one's entire site seems odd, but the bigger problem for me is that MobileMe seems to refuse to take the re-pub attempt, failing with a different error message regarding a different file every time since Tuesday evening. Not a single one of these files, nor the site in general, gave me any problems under iWeb 2/'08 or prior to Tuesday evening.
The net effect is that my site has been dead for three days, and some part of this equation -- either MobileMe or iWeb 3/'09 -- is rendering it impossible for me to resurrect it.
I did get a small, 1-page, new site to publish last night, but the prospect of having to break down a previously trouble-free blog into tiny, bite-sized chunks is ridiculous. This is not a huge Domain file we're talking about, and no single file is over 2.4MB (an MP3).
I would welcome any suggestions that go beyond basic troubleshooting and address the real, persistent problems that many people here are seeing with iWeb 3/'09 and MobileMe since upgrading.

My iPhone 5c has crashed it won't come on it shows apple when reset but then sends a message up top about rebooting and turns red and has lines like race tracks please help me

My iPhone 5C has crashed when reset it turns red or sends a message on top and sometimes even looks like a race track running through the screen

Has it ever been jailbroken or otherwise hacked?

After updating Final Cut X with Libraries feature most of media has turned to red "missing proxy".

I opened Final Cut X this morning and it told me I could not work on my projects until I updated them to Libraries. I made the update and now most everything has the red "missing proxy" screen on it. I am very upset because I have been working on a big project for 2 weeks and cannot work until this is resolved. Where are my projects???? Why is everything in red??? Somebody PLEASE advise!!

This is a very common question and has been answered many times. Have you searched this forum with your query? Did you save your old projects/events or are they in the trash?
https://discussions.apple.com/message/24351064#24351064
http://www.fcp.co/final-cut-pro/tutorials/1304-upgrade-your-events-and-projects- to-fcpx-10-1-libraries-the-smart-way
http://www.larryjordan.biz/fcpx-101-media-management/
Does this help?

My blackberry curve 8530 has a red light, then reboots itself a bit then turns off and keeps doing that repeatively.

my blackberry curve has a red light and reboots itself a little bit then the screen goes black and it keeps doing exactly that. the computer doesnt charge it because it cant considering it doesnt fully reboot itself. please please please help.

Did u try charging it from a wall charger, it sounds like its battery is dead.

I think hard drive has had it

HP Pavilion Elite m9255.uk bought in 2008 product number KT338AA-ABU SOFTWARE BUILD 82GBv3PrA3 AMD Phenom processor 9500 Quad Chipset nVidia MCP61 4GB standard memory DDR2-SDRAM 4DIMM sockets 2 x 500 GB ST 350062 oas scsi model number ST 3500620AS TSSTcorpCDDVDW TS-H653N video card NVIDIA GeForce 8600 GT Realtek High Def Audio Vista Home Premium Build Number 6001 Hauppauge WinTV 885 Video Capture When reading this post please bear in mind that I'm getting on in years and I know very little about computers. I hope I've put enough information about my system to help my request for help. The problem has been going on for some time but has become more frequent, it shows by the pc either creeping along at less than snail pace, or freezing. At the top of the case, inbetween the card reader slots a red light comes on, then it started to flash, then it stays on all the time. I tried reinstalling Vista a couple of months ago and all was fine for a while, then it all started again and got worse, it took about 10 hours to reinstall Vista onto reformatted C Drive and it hung for hours on the completing stage. I turned the power off, left it overnight and the next day I reformatted the C Drive again, it did finally install Vista, this time after about 4 hours but it's still freezing etc. Have tried sfc scannow result was no windows integrity violations I ran Seatools and it said that some areas were difficult to read tried checkdisk, running for 14 hours still on 14% of stage 5 my gut feeling is that the C drive has had it, no complaints because it has done lots of work. My thought is, as there are 2 hard drives the second of which has not had much use, could I remove the current C drive and move the now D drive into the C Drive slot and reinstall Vista on there? My thoughts are that if I can do this and it works then I could buy another drive to put in the D slot, don't want to waste money if it turns out not to be the hard dive. Of course what would be much easier (in theory in my head that knows nothing) would be to just swap the drive letters. Now, when you've all finished rolling about on the floor laughing hysterically (which I probably deserve), can anybody offer me any insights, suggestions or help please? I would be most grateful as I am very close to throwing the pc out of the window.
sorry about the was this post looks, I'm using a pathetic little netbook, I took ages to type it nicely but look what's happened to it.... sorry
This question was solved.
View Solution.

Your summary and explanation was excellent. Here is your system (computer). Do you have the Vista install DVD's? That is one item you forgot to mention. VIsta has about 20 monthes left in the LIfe Cycle (OS support and updates).
1) The 2 hard drives have both been spinning. The Vista OS is on "C", although the (2) 500GB hard drives are considered as one hard drive. See RAID 0 here.
2) The (2) 500GB hard drives are SATAII 3GB/sec. Newer SATAIII 6GB/sec is not supported by Vista. Your stuck with trying to locate SATAII 3GB/sec hard drive(s) that are now 3 times the price.
The actual Vista OS is on drive C. What I am going to recommend is that you swap the data lead on each drive. Re-install the Vista OS, and then disconnect the former C drive from the system. BTW -- I found your humor OK. I am not laughing!!
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

「Display driver has stopped working and recovered successfully」

I have a MSI GS60 2PC GHOST laptop.
Graphic Driver: Intel HD Graphics 4600
When I was playing a game on my laptop, it suddenly lagged or the game screen turned black, then recover, turned black then recover... multiple times and each time I get a message saying that the "display driver has stopped working and recovered successfully" on the bottom right.
I have tried updating the graphic driver and it worked for about an hour or so, and the problem came back.
Need help in solving this problem!

Does this happen when you run the game by using dGPU(NVIDIA graphics) or iGPU(Intel graphics)?
(Check the color of your power button light, it lights red when dGPU is running and blue when iGPU is running)
Does this happen on all games you play or just one single game?
Tell your current graphics driver version(both NVIDIA and Intel graphics driver).
If you're running the game with NVIDIA graphics, check your vbios version in NVIDIA control panel(Right click on the desktop> NVIDIA Control Panel> System Information>Video BIOS). There is version 80.04.EF.00.22 released on the MSI website, and if you have a different one, I'd suggested to update the VBIOS and see if the problem still remains.
VBIOS Download link: http://dl.msi.com/download_files/frm_exe/N15P-GX-B_80.04.EF.00.22.zip
VBIOS Update Guide: http://www.msi.com/files/pdf/VBIOS_Update_under_DOS_mode_EN.pdf

My iMac G5's Hard Drive Has Most Likely Failed

So my hard drive has been having problems since November 2005, but the computer has been barely holding out, until now. The computers just dead. I got this message from
It happened at the most random time. Yesterday morning, I turned on my computer and opened Safari. Everything went just fine, and about 3/4 way through loading the apple startpage, the entire computer froze up.
I tried disk utility but it froze while verifying and repairing disk permissions (about 1/8 started and it froze) and when I did verify disk, it came up with a popup window stating:
Error: The underlying task reported failure on exit
And then in the Disk Utility information window where it says the status that its at (Checking....) it said this:
Checking HFS Plus Volume
Checking Extents Overflow File
Checking Catalog File
Invalid Sibling Link
Volume Check Failed
The underlying task reported failure on exit.
1 HFS volume checked
1 volume could not be repaired because of an error
Then I ran fsck in single-user mode, and i got this:
#fsck -fy
disk0s3: I/O timeout
(4, 7808)
I'm not sure what the coordinates mean. I'm thinking they might be the coordinates to a bad sector that may be screwing EVERYTHING up because the computer failed to recognize the bad sector, and close it off of any further use.
After that I ran diskutility in single-user mode thinking maybe the GUI version was corrupted... but I let the diskutil verifyPermissions /dev/disk0s3 run for an hour and nothing showed up on the screen so i just decided to stop, shut down, and go to bed.
So now i've figured, my iMac has given me enough trouble as it is. ive had so many problems with it... ever since november 2005 (5 months into owning it) it has had the following hard drive error code show up in extended test for the Apple Hardware Test ever since... and about 1 hour ago, i retested it, and sure enough this came up:
**ERROR*CODE***ERROR*CODE**
2STF/8/3: S-ATA Bus O-Master
**ERROR*CODE***ERROR*CODE**
I'm really not happy with mac right now. I think their 1 year warranty is useless and they pretty much leave you screwed if you dont buy their applecare protection plan.
I have a windows 98 (upgraded from 95) that i bought way back in 1997, and its still functional... with the same hard drive... same everything... and it works just fine... except for the memory is small because back then 128 GB was the biggest it got) :P
so a 5 GB hard drive going on its 10th working years, and this 150 GB hard drive failed after 14 months... all i've gotta say is: Apple, thats pretty pathetic... especially after you mock PC in their commercials for "breaking down". Ive actually had less problems with all of my 3 PCs combined then I've had with this **** iMac.
So now heres what i'm trying to figure out. i'm wondering, what kind of hard drive i shuold buy to replace it... i tried the DIY hardware replacement ordering page but it says that the apple website couldnt find it (http://www.apple.com/support/imac/g5/diy/).
I wasnt planning on buying from the apple DIY anyway, but I wanted to see if it would specify a type of hard drive. Where is the popular website to go to buy these things, and how expensive will it be for me to replace it with a hard drive about as big as my current one).
Or should I not throw my hard drive away yet, and invest hope in it somehow. I heard DiskWarrior could do the trick, but I dont want to have to spend $80 on a piece of software that might not even work out right. And all the free ones you have to download to your mac... but too bad for me, my mac wont even start up... (well it does but when it gets to the desktop, its pretty much unfunctional... just a moving mouse that wont do anything).
Is there some renouned website (as crucial.com is for memory) among these forums that you might suggest?
I'm open and desperate for any input i can get. The sooner the better
Thanks in advance
-Mark

Hey look, its my friend Charlie from my Disk Permissions Error -36 post.
Here's our thread from last time. Alot of the stuff there still pertains: http://discussions.apple.com/thread.jspa?threadID=620422&tstart=0
It turns out the reformat I did only worked for a little while. Then last friday, my kernel was corrupted, and so i did "Erase All" but skipped the "Zero All Data" figuring that it wouldnt be necessary since I wasnt discarding my drive, so there wasnt anything to secure from anyone recovering private data. It worked for 4 days after that, and now I'm here again. With problems.
Do you remember getting disk I/O errors on disk0s3?
If you remember way back then, I had gotten this error when I did diskutil list in Terminal:
Aug 30 21:42:08 mark-imac-g5 kernel[0]: disk0s3: I/O error.
/dev/disk0
#: type name size identifier
0: Applepartitionscheme *149.1 GB disk0
1: Applepartitionmap 31.5 KB disk0s1
2: Apple_HFS Macintosh HD 148.9 GB disk0s3
I'm running DiskWarrior right now (borrowed it from a friend... didnt feel up to paying the $80 & have it potentially not work) and its stuck at this message:
Rebuilding Directory Data
[ |||||||||||Solid Progress Bar||||||||||| ]
Step 5: Locating Directory Data
[\\\\\\\Barbershop-like Progress Bar\\\\\\\]
Speed inhibited by disk malfunction (Skip) (Cancel)
Its been stuck there for about an hour, and I'm assuming its not going to work as you suggested it wouldn't
It's too late to do any good now, but if you ever run the
hardware test and get an error code, you should have Apple
look at it. If you were getting that error code 5 months
after the computer was new, a replacement drive would have
been covered under your warranty.
I wish I had actually done so. I was a mac-noob back then so I had no idea what anything was, and I was still getting used to the actual working-with-a-mac thing (ive been a Windows user for most of my life except for working/helping teachers with their macs at school... i was always the computer-person in school... it was pretty awesome :P)
I have to disagree with the other posters. I don't think >DiskWarrior is going to help you. Data Rescue II might help >you to get some files off your hard drive if you have files >on there that aren't backed up. But my experience was that >when I got the error in the hardware test, DiskWarrior >didn't work.
Right now I have everything backed up that I need, so it's not like i'm using DiskWarrior to get my data back. I just want a program to be able to tell the hard drive that these certain sectors that are acting up and causing the hard drive to fail are ruined and to not use them anymore. If its not just 1 sector, but the entire hard drive that is failed, I'm not even gonna bother salvaging it (even though i'm sure if it was completely failed there would be no way of getting it back that deep into failure).
I read at this website about someone else who had a similar problem to mine (http://www.desktoppublishingforum.com/bb/archive/index.php/t-901.htmldiskwarrior+speed+inhibited+by+diskmalfunction&hl=en&gl=us&ct=clnk&cd=2):
ElyseC - 07-14-2005, 11:52 PM
And now the latest reply from Marc the support tech:
There have been a handful who have seen success after four
or five days with the "speed inhibited by disk
malfunction" message. There have also been a few
up to a week. From there, admittedly, the state
of the drive has to be pretty damaged for DiskWarrior to
run so long, although the speed DiskWarrior can work is
also related to the speed of the processor, so four days
for a G3 is different than four days for a G5.
She later posted this:
,..for a variety of reasons I ended up letting DW chug away on my drive for a few days shy of an entire month.
*UPDATE MID WRITING THE POST*
Disk warrior finally unfroze! It's now Comparing Directories (recording any file or folder differences).
I'll post more when it's all done
Or if i have trouble mid-way

Mavericks has turned my computer into a brick. Check out my EtreCheck and let me know any suggestions.

I upgraded to Mavericks and my MBP has turned into an absolute brick. I need some help. Let me know any suggestions and any services that can help. Thanks in advance.
Here is my EtreCheck
Hardware Information:
          MacBook Pro (13-inch, Mid 2010)
          MacBook Pro - model: MacBookPro7,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          8 GB RAM
Video Information:
          NVIDIA GeForce 320M - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9.1 (13B42) - Uptime: 0 days 6:20:42
Disk Information:
          Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 249.2 GB (57.54 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS23N
USB Information:
          Apple Inc. Built-in iSight
          Apple Internal Memory Card Reader
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Computer, Inc. IR Receiver
          Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.epson.driver.EPSONProjectorAudio          (1.30 - SDK 10.4)
          net.kromtech.kext.AVKauth          (2.3.5)
          net.kromtech.kext.Firewall          (2.3.5)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [invalid] com.dymo.pnpd.plist
          [loaded] com.google.keystone.daemon.plist
          [loaded] com.leapfrog.connect.authdaemon.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [invalid] com.oracle.java.Helper-Tool.plist
          [loaded] com.trusteer.rooks.rooksd.plist
Launch Agents:
          [loaded] com.divx.dms.agent.plist
          [loaded] com.divx.update.agent.plist
          [loaded] com.google.keystone.agent.plist
          [invalid] com.oracle.java.Java-Updater.plist
User Launch Agents:
          [failed] com.google.GoogleContactSyncAgent.plist
User Login Items:
          GrowlHelperApp
          iTunesHelper
          EvernoteHelper
          ScanSnap Manager
          CrossOver CD Helper
          Dropbox
          SpeechSynthesisServer
          Calendar
          Mail
          DaemonManager
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          Rapport
Internet Plug-ins::
          MeetingJoinPlugin: Version: (null) - SDK 10.6
          o1dbrowserplugin: Version: 4.9.1.16010
          DYMO NPAPI Addin: Version: 1.0
          Default Browser: Version: 537 - SDK 10.9
          Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8
          DYMO Safari Addin: Version: (null)
          PrintDialogExt: Version: 6.1
          OVSHelper: Version: 1.1
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          DivX Web Player: Version: 3.0.1.5 - SDK 10.5
          Silverlight: Version: 4.1.10329.0
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          iPhotoPhotocast: Version: 7.0
          googletalkbrowserplugin: Version: 4.9.1.16010
          npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5
          AdobePDFViewer: Version: 8.1.0
          QuickTime Plugin: Version: 7.7.3
          SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6
          NPDjVu: Version: (null)
User Internet Plug-ins::
          CitrixOnlineWebDeploymentPlugin: Version: 1.0.105
          ConduitNPAPIPlugin: Version: 1.0 - SDK 10.6
Bad Fonts:
          None
Old applications:
          DMSLaunch:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/DivX/DMSLaunch.app
          DivX Converter:          Version: 10.0.1 (Build 10.0.1.57) - SDK 10.5
                    /Applications/DivX Converter.app
          DivX Player:          Version: 10.0.2 (Build 11.2.1.1) - SDK 10.5
                    /Applications/DivX Player.app
          DivXMediaServer:          Version: 10.0 - SDK 10.5
                    /Library/Application Support/DivX/DivXMediaServer.app
          DivXTransferWizard:          Version: 10.0.0 (Build 10.0.1.41) - SDK 10.5
                    /Library/Application Support/DivX/DivXTransferWizard.app
          DivXUpdate:          Version: 1.0 - SDK 10.5
                    /Library/Application Support/DivX/DivXUpdate.app
          Keynote:          Version: 5.3 - SDK 10.5
                    /Applications/iWork '09/Keynote.app
          Microsoft Alerts Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Alerts Daemon.app
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Chart Converter:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Chart Converter.app
          Microsoft Clip Gallery:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Clip Gallery.app
          Microsoft Database Daemon:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app
          Microsoft Database Utility:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Database Utility.app
          Microsoft Document Connection:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Document Connection.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Excel.app
          Microsoft Graph:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Graph.app
          Microsoft Language Register:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Additional Tools/Microsoft Language Register/Microsoft Language Register.app
          Microsoft Office Reminders:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Office Reminders.app
          Microsoft PowerPoint:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft PowerPoint.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
          Microsoft Upload Center:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Microsoft Upload Center.app
          Microsoft Word:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Microsoft Word.app
          My Day:          Version: 14.3.5 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/My Day.app
          Numbers:          Version: 2.3 - SDK 10.5
                    /Applications/iWork '09/Numbers.app
          Open XML for Excel:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Open XML for Excel.app
          Pages:          Version: 4.3 - SDK 10.5
                    /Applications/iWork '09/Pages.app
          Solver:          Version: 1.0 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/Add-Ins/Solver.app
          SyncServicesAgent:          Version: 14.3.9 - SDK 10.5
                    /Applications/Microsoft Office 2011/Office/SyncServicesAgent.app
          WDQuickView:          Version: 2.0.0.15 - SDK 10.5
                    /Incompatible Software/WDQuickView.app
Time Machine:
          Skip System Files: NO
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 232.09 GB Disk used: 178.49 GB
          Destinations:
                    Time Machine Backups [Local] (Last used)
                    Total size: 0 B
                    Total number of backups: (null)
                    Size of backup disk: Too small
                              Backup size 0 B < (Disk used 178.49 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               4%          mtmd
               4%          WindowServer
               2%          mds_stores
               2%          Mail
               1%          mds
Top Processes by Memory:
          467 MB          mds_stores
          205 MB          Mail
          156 MB          Safari
          98 MB          Google Chrome
          82 MB          Finder
Virtual Memory Statistics:
          3.87 GB          Free RAM
          2.79 GB          Active RAM
          317 MB          Inactive RAM
          796 MB          Wired RAM
          665 MB          Page-ins
          0 B          Page-outs

First
Disable completely uninstall Krometch AV and firewall software per the instructions on the the app developer's website.
Your ISP's modem and if you use an additonal WiFi router, there are bulit-in firewall protection and there is software there you can access from a web browser to set stronger security from these devices.
OS X doesn't need any additonal third party software firewalls.
Uninstall Trusteer Rapport per the instructions on the software developer's website.
This app, usually, causes problems with any recent version of OS X.
You might want to go though your user login items to see which one's, if any! you really need to have start up once you are initially logged in to your Mac.
Add or remove automatic items
Choose Apple menu > System Preferences, then click Users & Groups.
Select your user account, then click Login Items.
Do one of the following:
Click Add below the list on the right, select an app, document, folder, or disk, then click Add.If you don’t want an item’s windows to be visible after login, select Hide. (Hide does not apply to servers, which always appear in the Finder after login.)
Select the name of the item you want to prevent from opening automatically, then click Delete below the list on the right.
You need to update all of your third party software if there are OS X Mavericks updates that can be applied.
You may need to go the third party developers' websites if there are no updates through the Mac App Store.
Update all of your Web browser Internet plugins, also.
Also, if you have any third party devices, like keyboards, mice, drawing tablets, hubs, card readers, etc, you need to update the drivers for these devices to OS X Mavericks compatible versions.
Good Luck!

I need some help, somebody has turned the restrictions on on my daughters iPad mini and we don't know the pass code to turn it off. She has lost the iTunes icon because of this. Anybody know what to do? Thanks

Help, somebody has turned the restrictions on on my daughters iPad mini and we don't know the pass code to turn it off. She can't use iTunes because of them being turned on. I have tried backing it up to a laptop and then restoring it to factory settings but you need the pass code to do this....any ideas how I can turn it off or reset it, anything that might help its driving me potty...
Many thanks
Jo

Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

S.M.A.R.T status failing??? Drive has a hardware problem?

I bought my iMac in June,
Just went into disk utility and I noticed that the 1TB drive was red.
I've clicked on it and it says that
"This drive has a harware problem that can't be repaired.
Back up as much of the data as possible and replace the disk. See an authorized apple dealer for more information."
Down the bottom it says the S.M.A.R.T status is failing?
Can anyone please explain what is going on and why this would be happening on an iMac that is only about 6 months old?

Before going to the trouble of taking your Mac in, give AppleCare a call and tell them what S.M.A.R.T. reported. They'll probably walk you through another test or two and if it's really on the way out you should ask them to send a technician to your house to change the drive. Here in the U.S. they will do it if you live within 50 miles of their service provider. They did it twice for me in the past. It may also be the case in Australia. Can't hurt to ask and you can save lugging the Mac in if they will do it. And as the other posters pointed out, back up your data from that drive first because when they change it they will keep the old one.
Rick

Published iWebsite pages turn red when scrolling pages in iWeb

Hi everyone,
Just wondering if I'm the only person who has this issue; when I publish my iweb sites and pages (to MobileMe) all goes well, but when I then scroll my page up and down in iWeb the site turns red again as if I have changed its content.
I've tried the usual stuff (deleted caches, prefs, logged into MM under a bogus username and password) to check if the problem is a MM issue but this also occurs when I publish to a folder...
I've repaired disk permissions and did a fresh install of OS X (10.6.7) two weeks ago.
Does anyone have any other suggestions which might solve this issue? Or perhaps even the same problem?
cheers,
koen

Brilliant OT!
Although immediately posting to the discussions group says something about my personal opinion on the reliability of iWeb ... the problem was caused as you expected; the double digit finger action.
So 'no swiping in iWeb' I suppose.
The 'turning red' of published site pages was 100% reproducible by scrolling down using my trackpad, but it doesn't happen when I use my mighty mouse or the arrow buttons/scroll bar thing. (Even although nothing was selected in iWeb, bit of a bug if you'd ask me)
Thanks again for pointing out the logical and to me not so obvious
cheers,
koen

FCPX project turned red overnight. "Modified Files".

I spent three hours editing a talent show video for my school on my iMac. We used two Canon HFM41 cameras shooting in HD. I imported the clips and created a multicam clip and edited the clip with no problems. I stsrted uploading the project to YouTube before going to bed and woke up to a disaster. One of the camera angle clips and the multicam clip in the Event Browser had turned red with "Modified File". I have done this before many times successfully but not since upgrading to Mavericks. Please help me. Thank you.

OK, I do NOT mind rerendering to save a fifth of my hard drive.
Do you you have any idea why one is a fourth the size of the other?

HP_RECOVER​Y D: drive has turned red

Similar Messages

Maybe you are looking for

HP_RECOVERY D: drive has turned red