HP recovery could not restore computer error code 0xe0ef000e

I bought a nice Solid State drive. Unfortunately it is not possible to upgrade my system to new hard drive. It fails every time with HP recovery could not restore computer error code 0xe0ef000e. This is after removing everything... graphics card, ram, cd drive... nothing is plugged in except the keyboard, monitor and mouse.
Windows 8 strikes again. Does anyone have any suggestions about how to actually use the recovery disks to reinstall windows 8 onto a new solid state drive. I hate this computer and wish I would have never bought it actually. It's been nothing but crap from day one.

It's the HP 500-023w desktop. I ended up just buying a Winodws 8.1 OEM disk and installing that on the SSD. The recovery tool is a bit useless. Reading through various forum posts it seems I would have ended up spending hours trying to figure it out or else buying the recovery disks from HP. Just paying $89 for an OEM disk is a good deal by comparison since at the very least the computer has no bloatware on it now.
What a hugely unnecessary hassle really. Now if only I could get this heap of junk to boot with a PCI-e graphics card installed I might actually be able to use it with two monitors. Good grief.

Similar Messages

HT4623 iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message

Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com.

HT201364 I'm trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wo

im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help

you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If that does not work, take in for service
Genius reservation http://www.apple.com/retail/geniusbar/

Heart beat could not open connection, error code 110

Hi, where can I find error codes for NFR and NSM?
I have problems with some agents connecting to the engine:
2/17/2010 16:02:55 EngineInterface: Heart beat could not open connection, error code 110
Both engine and agent runs on the same server (10.236.19.147):
AgentNCP Service Config
Host Address: 10.236.19.147
Service Ports: HTTPS: 3037 HTTP: 0
Data Path: /var/opt/novell/filereporter/agentncp
Debug Logging: Enabled
Heartbeat: 60 seconds
Engine Address: 10.239.19.147:3035
Use SSL: Yes
Alternate Hostname: huanovellfs1
Engine Service Config
Host Address: 10.236.19.147
Service Ports
Client HTTPS: 3033 HTTP: 0
Agent HTTPS: 3035 HTTP: 0
Data Path: /var/opt/novell/filereporter/engine
Debug Logging: Enabled
Heartbeat: 60 seconds
DSI Address: 10.236.19.89:8009
Use SSL: Yes
Scans per Volume: 2
Another OES2 server connects fine to the engine, butI have a Netware agent, which also fails to connect:
Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open connection.
NFR is 1.0.0
Thanks for any input.
Istvan

Hi Istvan! Sorry for the delay in our response! we are in the process
of building a list of error codes for everyone! in the meantime the 110
means the following:
// Couldn't create a new network interface
#define CC_STATUS_CCS_CANT_CREATE 110
Is this an NSM integration installation?
Also, remove the alternate hostname.
If you don't mind, let's move this support issue to
filereporter"@"novell.com!
Thank you!
icseke wrote:
> Hi, where can I find error codes for NFR and NSM?
>
> I have problems with some agents connecting to the engine:
>
> 2/17/2010 16:02:55 EngineInterface: Heart beat could not open
> connection, error code 110
>
> Both engine and agent runs on the same server (10.236.19.147):
>
>
> AgentNCP Service Config
> ------------------------------------------------------------------------------
> Host Address: 10.236.19.147
> Service Ports: HTTPS: 3037 HTTP: 0
>
> Data Path: /var/opt/novell/filereporter/agentncp
> Debug Logging: Enabled
> Heartbeat: 60 seconds
> Engine Address: 10.239.19.147:3035
> Use SSL: Yes
> Alternate Hostname: huanovellfs1
>
> Engine Service Config
> ------------------------------------------------------------------------------
> Host Address: 10.236.19.147
> Service Ports
> Client HTTPS: 3033 HTTP: 0
> Agent HTTPS: 3035 HTTP: 0
>
> Data Path: /var/opt/novell/filereporter/engine
> Debug Logging: Enabled
> Heartbeat: 60 seconds
> DSI Address: 10.236.19.89:8009
> Use SSL: Yes
> Scans per Volume: 2
>
> Another OES2 server connects fine to the engine, butI have a Netware
> agent, which also fails to connect:
>
> Feb 17, 2010 4:08:11 PM SR Interface: Heart beat could not open
> connection.
>
> NFR is 1.0.0
>
> Thanks for any input.
>
> Istvan
>
>

Help with CS5 Updates Failed, Updates could not be applied, Error Code U43M1D207

CS5 Updates Failed, Updates could not be applied, Error Code U43M1D207
Can anyone help with this error code?
Products installed and activated on new laptop
Unable to update using Adobe Application Manager
Thank you

I followed up on the Photoshop Error code and found some suggestions by Jeff Tranberry and Pete Green here.
Michael

When was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

when was unloading creative cloud came an announcement that Rhodesia that had an error and could not download the error code was 50 which means

Nobody can tell you anything without proper system info or other technical details.
Mylenium

TS1814 i wana restore my iphone 3g but when i restore it with itunes after some time is say '' iphone could not restored unknow error 1015 '' help me please

i wana restore my iphone 3g but when i restore it with itunes after some time is say '' iphone could not restored unknow error 1015 '' help me please

99% because your iPhone was hacked/jailbroken. We cannot help you, see terms of use.
Error 1015: This error is typically caused by attempts to downgrade the software for an iPhone, iPad, or iPod touch. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version isn't supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you're now trying to restore to an authorized, default state.

HT4623 will not restore getting error code 3194?,

cannot restore getting error code 3194, any advice

Actually usually it happens when itunes is not up to date or not compatible with that iOS.
michaelamoore11 - If you are trying to restore and you had iOS 7 on it, make sure that your itunes is up to date with 11.1 or you will get that message. Once you update, then you can restore

The operation could not be completed (Error code -43)

Trying to run Time Machine for first time. Get "The operation could not be completed. An unexpected error occurred (error code -43)." Have rebooted etc... suggestions?

What is the partition map scheme (Apple partition map, or GUID?) and what is the format (HFS+/Mac OS Extended or other?) of the drive? For PowerPC Macs the Time Machine drive requires "Apple Partition Map", and for intel-based macs it requires "GUID". Both architectures require "HFS+" (otherwise known as "Mac OS Extended") for the format of the drives.

Outlook 2011 for Mac Data is corrupt Mail could not be sent Error code: -19943

Why am I constantly getting this error?
What does this error mean?
How do I fix this?
This MacBook Air belongs to a VIP in our company. She is under the impression that she has received a lemon, due to the following experiences (verbatim):
Random beeping noise coming from machine. Unexplainable. No obvious pattern.
Machine randomly sounds like an airplane taking off. Fan running constantly.
Unable to view Sent folder in Outlook. Periodically.
Unable to view Sent items. Periodically.
Calendar items/invites/meetings do not display accordingly.
Unable to accept/decline meeting invitations.
Pinwheel constantly displays. Forced to reboot due to freezing.
Constantly receiving 'Data is corrupt' error message in Outlook.
Constantly receiving 'An internal server error occurred. The operation failed' in Outlook.
I understand the majority of these issues points towards the Office/Outlook application, but why don't any of the troubleshooting methods resolve or alleviate any of the aforementioned symptoms at all?
No one else in my company with this software is receiving this message.
I have rebuilt the database 3 times.
I have reinstalled the software twice.
All software is up-to-date.
Why doesn't Apple support this software?
Why doesn't Microsoft support this software?
Every forum I search regarding Office for Mac results in a never ending loop of both companies panning the issue off to the other and nobody takes responsibility.
Is there anyone out there willing to take the time to assist me and fully exhaust their knowledge to present some sort of solution towards this issue?
I am fully committed to this discussion and will provide any and all information needed in order to fix the issue.
Why are there other users with the same software who are NOT experiencing the same issues?
As a last resort, I am aware backing-up the profile/account and restoring the OS is an option. What if this plan of action doesn't solve anything? What if the problem persists?
My technical knowledge of Apple/Mac devices is limited, and I would appreciate any advice/suggestions/support on the matter, as this is a high priority issue and I would like to learn from this so as to avoid any similar issues that I may encounter in the future.
Thank you in advance for your help.

Hello Warren, which Mail App?
Generally,
SMTP error 554 (Transaction failed) is one of the most vague error codes, but is typically caused by something in the From or To headers that server doesn't like.
In other words, the problem is in the sender or recipient email address.
It can be caused by
The sender address isn't valid.
The server thinks this email is spam or server IP address has been blacklisted
A spam trap identifying your machine as a relay, or as a machine not trusted to send mail from your domain.
http://www.fox.ra.it/forum/13-submissions-via-email/444-smtp-error-5-5-4-transac tion-failed.html
To see if it's your provider, What's my ip...
http://www.whatismyipaddress.com/
Start with these three, check SpamCop or SpamHaus to see if your IP is there...
http://spamcop.net/bl.shtml
http://www.spamhaus.org/lookup.lasso
http://www.spamhaus.org/zen/
Sometimes an ISP will bloc a whole other ISP too, if it's the source of too much SPAM.

WHEN I TRY TO PLAY A DVD IT SAYS A Vaild DVD Drive could not be found error code [-70012]. What do i do?

I put in a dvd and tried to play it. it gave me an error code -70012. it will not show any disk and i have tried everything to eject it. what can i do?
error code -70012: A Valid DVD Drive could not be found

To eject the disc, try these options:
Credit Kappy.
Ciao.

HT201210 could not restore unknown error occurred (11)

what's the problem?

When I search for the error code, everything leads to articles about the device being jailbroken, which would mean Apple doesn't support that device anymore. Can anyone confirm this?

System Recovery does not work. Error Code: 0xe0ef003

I have a Touchsmart 310 1125y - Upon bootup was getting a BOOTMGR is missing. I tried the system recover on the hard drive and that failed with the error code: 0xe0ef003. I went ahead and purchased the cd revovery discs from HP Site ( 4 plus the supplimental reovery disc) and ran all of them and got down to disc 4 and then that same error came up. When I tried to reboot, it comes up to a blank screen with the flashing cursor in the top left corner. I hit ctrl/alt/del and the HP Blue screen comes up, when I hit the F11 now it just goes to a blank screen again with the cursor in the top left corner. Any other suggestions on how I can fix this?

Hi
Once unit is powered on keep tapping F10 Key go to Diagnostics run the Hard drive test if failed you need to replace the Hard drive if test passes kindly let me know.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Operation could not be completed error code 10657

I have a iomega external HD that I am trying to use to back up my macbook pro. I just upgraded to 10.5.8. I used the iomega before using retrospect software to back up and now was trying to use time machine. Time machine went through the entire backup, but when I try to open anything I get the error message above.
Any ideas of what I need to do?
Thanks

I used migration assistant. There was a message that the transfer was complete. I googled the error message -
I got the solution to this problem at the Genius Bar.
As they explained it, Time Machine is software that saves files on the backup drive in a format that can only be read by Time Machine. So, when you open Time Machine, you can click on any file and it will open.
If you try to open a file directly from the backup drive, it needs a program to open it, and if Time Machine is not open, you get the error message.
If your computer crashes, when you get it fixed (or get a new Mac)and when you connect the backup drive, Time Machine will recognize it, will ask you if you want to associate it with your computer, and when you say yes, all your backed-up files are availabel and copied back into the computer.
I am so very afraid to do ANYTHING!!!!

Index category could not be created; Error code 2982

Hi all
I get this error when we try to do the Product Catalog Replication with CRM 5.0 SP 8.
We check the RFC Conection, Search Server Configuration, TREX 7.0 status and is Running Ok, IIS user access and Virtual Directory config.
Any help on what else to check o the error reason?
Thanks in Advance.

Hi Luis,
I had the same pbs, and did the users add full rigths on the folder you replicated your catalog. This user must be the same user as in your CRM system, ( the targets publishing user => spro=>Customer RElation Ship Management => Product Catalog => Set Target for publishing Catalog Content..)
Hope it's help

HP recovery could not restore computer error code 0xe0ef000e

Similar Messages

Maybe you are looking for