HP Scan 3 error on OS X 10.9

Hey!
When I try to launch HP Scan 3 I get an error that says me to try to reinstall the software and to check the compatibility with my OS.
I tried to uninstall and reinstall the printer's drivers, but HP Scan 3 still doesn't work.
On HP site I can't find a way to reinstall HP Scan 3! Can anyone help me?

I tried it, but it says it didn't find any device plugged in.
Actually it sees the printer but then it disappears.

Similar Messages

Disk Utility: after creating the .DMG (compressed image) When "scan image for restore" finishes it displays "unable to scan (internal error)". Since the process was scanning for about 1 hr is this a fake warning?

External 500GB drive is partitioned with 400GB for Mac OS extended (journalling) and 2nd partition formatted today as "ExFAT".
Yesterday I tried to create a disk image of my HD to no avail - this was compressed on a FAT partition. I got a warning after running the <scan image for restore> saying "unable to scan (internal error)"
I rang Apple support who suggested formatting a partition as MAC OS extended (journalling) and choose to save the image as "read/write'. The image process stopped writing at about 200GB and then the file size jumped to 499GB (ie the size of the HD). But the process did nothing for about an hour so I foce quit disk utility (as suggested by apple support)
My current attempt was to format the external drive again; this time with a 400GB Mac OS extended (journal) format; plus a 100GB ExFAT format partition. The new image was created after about 2.5hrs with a compressed size of 149GB. However, after running the "scan image for restore" facility I got the warning message "unable to scan filename " (internal error). The process was scanning the image file according to the progress bar - this took about hour - thus the warning is a puzzle.
If anyone can say more about this error I would really appreciate knowing tips for using disk utility. The screen grab is below.
"unable to scan filename " (internal error)
thanks

Thanks for a quick reply <baltwo>. You’ve answered that it is not a fake message!
fyi: I thought that I would use my external Buffalo for two purposes; namely the smaller ExFAT partition for copying stuff to my win7 netbook. The larger partition was to be used as my imac image of SL. So this was my first attempt at using disk utility - the idea being to hold an image backup at another location. Plus I now have the Lion thumbdrive ready to upgrade from SL and so being cautious wanted to have a SL image backup
Anyway I followed the apple instructions using my mac 10.6.3 install DVD but it would appear from other discussions that <unable to scan (internal error)> is not unique to me.
I’ll get back to apple telephone support for further advice.
I would though be grateful for an “idiots’ guide to making an image backup of my internal HD that runs SL 10.6.8
eg should I have just one partition on the external USB drive? format it as Mac OS extended? create the image as compressed or read/write? Basically I’ll do whatever will work!!
thanks again

Scan.api error after scanning and then clicking no for no more pages. Acrobat x pro then closes.

I never had a problem scanning and saving the file before. But now I receive an error after I finish scanning, then hit "no" for no more pages to be scanned. Error message is as follows: Adobe acrobat error signature: AppName: acrobat.exe AppVer: 10.1.10.18 ModName: scan.api ModVer: 10.1.10.18 Offset: 00033117.
Then the program closes.
This is really driving me crazy because I haven't done anything different to my computer or the scanning process. Please help.

Hi Charlene Luong,
Could you please let me know if you are on Windows or MAC.
Also, restart your computer and check for your system updates.
Hope to get your response.
Regards,
Anubha

Virus scan server error - when submit to sap

Hey all,
i am getting an error when i submit my project into sap repository.
i can connect to the sap system without any error but it says me that i have to create a virus scan profile for ui5 when i search for the virus profiles on img i can see /UI5/UI5_INFRA_APP/REP_DT_PUT profile.
the error that i am getting the fallowing error...
File .settings/.jsdtscope could not be submitted Virus scan server error: "Recursive occurrence of virus scan profile /UI5/UI" ( path: .settings/.jsdtscope )
File .settings/org.eclipse.jdt.core.prefs could not be submitted Virus scan server error: "Recursive occurrence of virus scan profile /UI5/UI" ( path: .settings/org.eclipse.jdt.core.prefs )
...........it goes....
my virus provider
glad to hear your helps.

Hi Abraham,
Thank you very much. My problem resolved.
I have one Query Please guide me.
whenever we run Server URL from The Browser, first we must need run "chrome.exe --args --disable-web-security" command on CMD. on located directory the Chrome has installed.
to disable web security.
if I did not run that command on CMD, then Fiori Apps not worked.
Why it's compulsory to disable web security.
Regards,
Pankaj Kamble

I keeping getting this error when i try to scan HVURLHandlerErrorDomain error 1003.)

i keep getting this message when i try to scan HVURLHandlerErrorDomain error 1003.)

Your Profile on these Forums does not list which model and version of iMac you are using, nor the verision of OS X you are using, nor which model of Scanner. Please tell us.
Hope this helps

Virus scan server error: "No virus scan profile is selected as the "default"

Hi Team,
I try to upload Fiori Code into SAP Netweaver Gateway server .
i can able to share Project.
But when i try to submit code
then at the end of Process i got error message.
Virus scan server error: "No virus scan profile is selected as the "default"
Please Guide me
Regards
Pankaj Kamble
Tags edited by: Michael Appleby

Hi Abraham,
Thank you very much. My problem resolved.
I have one Query Please guide me.
whenever we run Server URL from The Browser, first we must need run "chrome.exe --args --disable-web-security" command on CMD. on located directory the Chrome has installed.
to disable web security.
if I did not run that command on CMD, then Fiori Apps not worked.
Why it's compulsory to disable web security.
Regards,
Pankaj Kamble

Abode X "Scanning Canceled" error

I am using Windows 7 (64 bit), my scanner is HP ScanJet 5590 with the latest drivers (64 bit).
I upgraded to Adobe X last week, every time I try to scan using the WIA scan option a screen flashes too fast to read and then the "Scanning Canceled" error message (Adobe's spelling not mine) pops up. I have found that if I use the TWAIN scan option that I can get it to work, I prefer the WIA as the B & W image handling is better and file size smaller. TWAIN B & W is illegible and I am forced to use color.
Why won't the WIA scan option work?
It worked just fine in Adobe 9 with all of the same drivers and operating system. Given that, it seems to be an Adobe X problem not an HP driver issue.
I downloaded the HP scanner diagnostic and ran that, comes up clean.
Any ideas? I see that I am not the only one.

Hello Lary
Try this steps.. hope it will work
1: Go to Create >> PDF from Scanner >> Custom Scan
2: Select the scanner from Scanner dropdown button.
3: Click on button "Options" next to scanner dropdown list.
4: In the User interface, select Show Scanner's Native Interface.
5: Now click on Scan button.
You will be shown the manufacturer's UI now wherein you can specify if you want to preview the image and select the desired area for scan.
or
maybe Trick is in selecting flat bed or paper feeder. Last is default.
In configuring pre-sets after selecting the scanner choose options.
Make sure it is set to native modus and show scanner interface. Save this.
Try adapted scan first, lets you choose between the flat bed or the paper feed.
Brings you to scanner's interface and scans.
Next time just select the scan function you want (not adapted).
Brgds,
Creator M.P.
www.apartmani-vrtlici.com

Virus scan failed Error on deploying a web application having a jar file for calling the applet on the jsp page

Hi,
I have an applet application that i want to deploy on the Oracle cloud.
So i have created a jar file for the applet application and i am using this jar to call the applet on a jsp page.
But when i am delpoying my application on the java cloud, its giving me the below error:
2014-10-28 03:16:41 CDT: Starting action "Virus Scan"
2014-10-28 03:16:41 CDT: Virus Scan started
2014-10-28 03:16:49 CDT: ----------------------------------------------------------------------
2014-10-28 03:16:49 CDT: File Scanned: "Application7.ear".
2014-10-28 03:16:49 CDT: File Size: "106698122".
2014-10-28 03:16:49 CDT: File Status: "INFECTED".
2014-10-28 03:16:49 CDT: ----------------------------------------------------------------------
2014-10-28 03:16:49 CDT: Virus scan failed.
2014-10-28 03:16:49 CDT: "Virus Scan" complete: status FAILED
Can't we deploy any application having applet or swing component's onto the cloud?
Or do we need to request for any extra permissions for the same?
Thanks,
Manoj

I don't see applets mentioned in the supported features nor in the unsupported features so not sure if they are supported you would likely need to contact the operations team to confirm.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Saving scanned doc error message when using Mac Maverick with HP Photosmart C4795

When I use HP Scan to scan documents with my HP Photosmart C4795 it scans fine. The problems comes when I try to save the scanned document. I get one of two things, an error message or black document. I get an error that states "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I know that's the location is not read only because I save documents there all the time from other programs. When I get the black document, I open the file and its a black page with white lines going across.
This started happening when I upgraded to Maverick. When I had snow leopard I didn't have this problem. I looked for update drivers and there aren't any available on the HP software & drivers webpage. HP help! Any suggestions please help.

Hi,
That happens due to lack of compatibility of the HP Scan application for your device with Mavericks, it is not intended for the operating system and will cause issues while saving a file.
Be sure to run Software Update, then scan using Image Capture or Preview as listed below.. those are the scan solutions provided for Mavericks:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03550518&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Once you launch Image Capture, I would suggest keeping it on the dock for easier access.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp laserjet pro cm1415fnw won't scan WIA error.

We just got a hp laserjet pro cm1415fnw, it manages to print, but unfortunately it won't scan. We set it up to be wireless since it will be used by various users. When I run the HP printer and scan dr. it says that there's a WIA error. I tried uninstallin and reinstalling all the drivers and software, as the HPPSdr reccommended, nothing happened. I went into the forums and checked the services that needed to be running in order for the scan to work. All the services were up, but still it won't scan. I'm running out of options here with this device. If anyone could please give me some advice on how to fix the scanning issue I will be extremely grateful.
This question was solved.
View Solution.

Hi @sil89,
I understand that you are unable to scan, but you can print over the wireless network. I can help you.
Can you scan from any of the other networked computers?
Are you signed is a the Administrator of that computer?
WIA drivers are part of Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
I have provided this document, just to make sure these are the same ones you had checked.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn of the Antivirus Software and try scanning again.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
Please let me know the results.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Scanning causes error when opening PDF

Every time I scan or print with my HP Officejet 5610v, I can then no longer open a pdf by finding a file in the finder.
When I try I get the following error:
The document “iPhone intro.pdf” could not be opened. Acrobat cannot open files in the “Adobe PDF document” format.
I can still open pdf doc by opening Acrobat and clicking open and then find the file but that is a pain.
I have deleted my printer/scanner software and re-installed a new driver and tried updating my acrobat but to no avail.
Anyone have any other thoughts?
Thanks for the help.

Use the forum for Adobe Reader.

Im getting an not enough memory to complete this scanning operation error

I am using a WIA-HP CLJ CM1312 Scanner with Adobe Acrobat 9 Standard Version 9.4.6
This machine is Windows XP with 3gigs of RAM and plenty of HDD space....
When I try to make a color copy at a Resolution of 1200DPI I get an error saying that - "There is not enough memory to complete this scanning operation." It only works at 600DPI
I dont understand why I am getting this error. I would have thought my upgrade to 3gigs of RAM would have fixed this error.

1200 dpi can actually mean a lot of memory.
See if the steps under "error messages when scanning" releated to data transfer mode on this page help: http://kb2.adobe.com/cps/325/325262.html

Scan failure error codes

Computer is a Media center m495c running win 7; Printer is Photosmart C6150 all in one. Scaner is Scanjet G4050. Everything was working fine then it stopped scanning documents to PDF. Off loaded all Photosmart and Scanner software and reloaded just the Photosmart C6150 software. The scanning software appears to scan but when the preview window comes up the process freezes I get msg that states 1) retry the scan, if that does not work 2) relaod the scan software and if that does not work 3) reboot the computer.
The error msg at the bottom of the page is 4,[(3,42,0)]
Anybody got any ideas? I have reload the Photosmart software multiple times

jabzi wrote:
Hello,
Please try the below steps...
- Power Off the Printer.
- On computer, press CTRL + R to display RUN box. Type in %temp% and then hit OK. TEMP folder will be displayed. Delete
the content of the TEMP folder.
- Restart the PC.
- Power ON the printer.
- Now Try scanning . It should work.
Fixed did not work. Started process via HP Solution Center. Selected "scan document" selected pdf. scanner appeared to scan and HP scanning window opened. Machine scaning stopped/completed?. delay of a few seconds then another HP scanning window popped opened advising error and suggesting three fixes: 1) Restart Program, 2) Reboot computer and 3) reinstall Photsmart software. Error msg at bottom of window: 4,[(3,42,0)] On HP Solution Center window option for "guided solution" to problem which I selcted and received the following msg: "Access to C:\ProgramData\HP\LST2.0\data\session\phone_codes.txt was denied".

Unable to scan (internal error)

Hi Apple Have a question,
I am trying to create a bootable partition on my external firewire Hard Drive for Leopard OS.
First I created .dmg file : "Mas OS X DVD.dmg"
2nd > after creating the dmg file - I ran "Scan image restore" on the DMG file
3rd > after running completing both steps above the system generates this error message:
"Unable to scan "Mac OS X install Dvd.dmg" (internal error).
According to my research, before installing Leopard on to an external hard drive as a bootable partition, the dmg file must be scanned before completing the process.
However, the scan is not working. Can someone shed some light on how I can
get this off the ground.
Again:
The object is to create a bootable partition of leopard on to my external hard drive for
Technical maintenance support of my computers.
Please send me your solution or thoughts
Message was edited by: oross

Sorry, no Apple here, only other users. That said, I have no idea of what you're trying to do. If you want to make a bootable partition, all you have to do is install the software onto the partition. Alternatively, you can put a bootable backup/clone of your current boot volume onto it using Carbon Copy Cloner or SuperDuper!. BTW, the error indicates that the .dmg file you created is corrupt.

C7280 - Cannot scan. Error message says another program has control over the device

I opened the HP Device Manager to do a scan. I accepted the settings and the scan started. But part way through the scan, I stopped the scan as I realized that I wanted to change the resolution. I quit the Device Manager and restarted it but when I did, I got an error message saying:
"The function you have requested cannot be performed because another program has control over the device".
I don't have anything else open and so I can't work out what program has control over the printer.
C7280 Prtinter. Mac OSX 10.7.
This question was solved.
View Solution.

I was thinking that if you stopped the process in mid-scan that there may be some background processes still running. Rebooting usually stops those processes.
No, you will not have to do this each time. Next time, though, it may be easier to just let the scan complete and the do another scan at whatever setting you want.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HP Scan 3 error on OS X 10.9

Similar Messages

Maybe you are looking for