HP Scan 3 software not working with MacOS 10.9 Mavericks

I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks. Now my HP Scan 3 software does not work and there is no update for this software that I can find. Can anyone help getting updated HP scanning software to use with Mavericks. Thank you.

Thanks for your reply. I tried what you suggestsed and it did not work. My printer was listed. The website says it is for MacOS 10.8 and Mavericks is 10.9. My printer prints fine. The problem is with the HP Scan 3 software. When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS. Also, I went to the firm ware updater in my HP utilities folder and trie to run that. I got a message saying that there is no update for my device.
It is hard to believe that HP has not updated the scan software to work with Mavericks.

Similar Messages

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Apple scanner software not working with HP

HP claims that the Apple Scanner Software on PowerBook is not working properly with the HP scanner

Is this a question about the scanning software in the MacBook Pro computer shown
in your post's lower boundary area, or do you have a PowerPC G4 PowerBook, too?
There may be a newer or alternative driver for a recent version of OS X, that the
older obsoleted PowerBook can't run; but a later supported MacBook Pro, can.
Issues with Apple products, software or hardware that may elicit comment,
can be addressed to Apple Feedback... in case you want to tell them direct.
Mac OS X - Feedback
If you have posted in the vintage/obsolete PowerBook notebook ASC discussion,
by accident, Hosts could relocate this thread to one more appropriate, on request.
You may have to look into alternative drivers or software for scanners, if whatever
Mac you are using with the HP scanner is unsuitable. The older PPC based Macs
can't run an OS X version past Leopard 10.5.8. With a later MacBook Pro running
Mavericks OS X 10.9.4, you may have difficulty if HP does not support it...
Drivers for current printers & some scanners may be included in Mavericks; but
for users of older printer/scanner/copier all-in-ones, bits may be left behind. If
the HP product is older, a different version HP scanner driver may work. There
are a few open source drivers available, however I do not recollect the web site.
Please make clear what version HP product, which Apple computer portable, and
what OS X version, your discussion actually pertain to. Some users refer to a
MacBook/Pro as a PowerBook; and for a time, a MacBook as an iBook. Oh well.
{edited & re-posted -- after accidental reference to an unreleased software version}
Good luck & happy computing!

HP3390 - Scan and print not working with Windows 8.1

Hi
I am unable to print and scan using HP 3390 on Windows 8.1 HP desktop. I have downloaded drivers from the website at -
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1140613&swLangOid=8&swEnvOid=4158. They are not working at all.
Any help or guidance is appreciated.
Thanks,
- Ven

@VenMan
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

MSGTAG Software not working with K8N Neo LAN Port

Greetings All,
I'm having a problem using a message receipt service called MSGTAG (http://www.msgtag.com) It works with Microsoft Outlook and while it still uses Port 25 for the SMTP server, it also creates Port number 7362 to "listen" for when the recipient opens the e-mail and sends a receipt back to the originator. This service will not get past the LAN port on the K8N Neo Platinum board. Outlook just hangs until an error message pops up saying a connection to the smtp server was interrupted. I thought it might be the nVIDIA firewall software, so after opening up to correct ports, it still won't work. I then uninstalled the firewall all togther, but still no luck.
I'm running all the latest MSI and nVIDIA drivers.
I should note that as soon as I enable my PCI NIC and use that, everything is fine.
Anyone have a suggestion? MSGTAG tech support wasn't much help.
Much appreciated.

Looks like I finally figured it out. In the nVIDIA ForceWare interface under Ethernet Settings---->Advanced Configuration--->Checksum Offload, uncheck the box that says "TCP Transmit Checksum Offload" and hit "Apply" and now it works!
I have the overall Firewall set to "High" profile, and now the only two websites that don't come up at all are http://www.extremetech.com and http://www.netflix.com . I've seen postings in here before about Netflix. Does anyone has an easy answer as to what source code these two websites have in common that would make this firewall block them?
The only firewall setting I can find so far that allows them to load is "Off". I could drop it each time I guess, but there has to be another way.
Thanks for any help you can give!

Why is HP C4280 all in 0ne not working with Mac OS X Mavericks

After upgrading my Mac to OS X 10-9-2 Maverick , The HP C4280 All In one , will not scam properly , ck with HP the syst was scan and as told that
the Mac was not working or had issues with the operating syst.

See How to Scan with HP and Mavericks.

HP 7520 "Scan to Computer" not working with mac osx and wireless

Just installed from the disc, and then upgraded with latest version from HP site. Error message on 7520 printer is "No computer found". I am definitely connected to the same wifi network. Scan works okay if started from the iMac, bit not the other way around.

Hi MsChanChan,
You can remove the printer by clicking the "-" symbol in the printer list. After removing the printer, perform a restart and reinstall the software that you originally used to install the printer.
Don't forget to mark a post as solved if it fixed your issue

HIS multi-view ii software not working with OS X Yosemite

Hi all,
I just installed OS X Yosemite on my MacBook Pro and now my external moniter is essentially non-functioning (the display is streaky and goes in and out). I'm pretty sure this is due to the driver for the external display (HIS mulitview ii connected to an HP Pavailion 20xi monitor) is not up to date. Unfortunately it doesn't look like HIS has released updated drivers and they're located in Hong Kong so I'm having a tough time getting through. Any suggestions for a possible workaround until the new drivers are released?

Hi,
The original CD is intended for older versions of the operating system, not for Yosemite.
The software for your proiduct is available via Apple Software Update, simply plug the USB or connect the printer to your network.
Next open System Preferences > Printers & Scanners and click the plus sign to add the printer.
Once you are done, I would sugget running Software Update to ensure the drivers are fully up to date - from the Apple menu click on Software Update.
Clcik the Store Menu and click on Reload Page, then be sure to install any listed HP or Apple update and you are good to go.
If you need, you may find a more detailed instruction about installing the software below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04469325&lc=en&cc=us&dlc=en
Scanning can be done as listed below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04467713&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Satellite U200-161 Fingerprint software not working with IE7

Seems like the fingerprint facility for registering passwords is no longer working once ie7 (final) is installed.
Anyone else have this problem or is it just me?
Thanks
Nick

Hi
I have never ever used the Fingerprint utility but possibly you have to set the user settings in the finger print software management again.
I think if you have updated the IE to version 7 so you have to refresh the settings in the Fingerprint utility.
Im not sure if it will help you but you can try it and please give me a result.
bye

Air play is not working with new OS X Mavericks

no airplay box in tool bar I just loaded new OS X Mavericks so cant connect to apple tv

Does your MacBook Pro meet the requirements:
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supported by the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (late 2013)

My upgraded version of mail with Windstream will not work with Mozilla Firefox. Why? Works find with the old Classic but not the new version

It switches to the Classic view but not the new view which I really like.... My laptop has Google Chrome and it has not problems with this new view of Windstream only with Mozilla Firefox 5, the other version never had any problems either...I had 3 and had no problems till I up graded....

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Scanning software to work with CS6 and Mountain Lion

Since I upgrading my Mac to OS Mountain Lion 10.8 and downloaded Adobe CS 6 I have been unable to get my Epson Scanner to work properly. Since none of the drivers from the Epson and Adobe websites have worked so that I could scan from photoshop, I am looking into using third party software. Adobe mentioned VueScan in their instructions, but it is expensive and I don't like how it is laid out. It appears that SilverFast only works with 32 bit not the 64 required in CS6.
Has anyone else found scanning software that worked for them?
Or does anyone have an idea of getting the Epson software to work on my machine?
The scanner is an Epson Perfection v600 photo scanner, which is still being sold currently as something that works with new computers.

I have a scanner. I am trying to get a driver or new scanner software to work with it. Someone in a different discussion pointed out an article in MacWorld that goes into why this is not working.
http://www.macworld.com/article/1168305/get_your_scanner_to_work_with_photoshop_cs6.html
I would still be interested to know if anyone has had a positive experience with third party scanning sofware. Vue scan? Silverfast?
Also to the Adobe staff :
This is quoted from the MacWorld article.
Right now, if users are running Mountain Lion (OS X 10.8), they will not be able to scan into Photoshop CS6 as described. According to Adobe, this is an across-the-board problem with the Cocoa classes comprising the scanning interface that it is using in Photoshop. It is neither a user nor a scanner manufacturer issue.
Adobe is aware of the problem, has identified it as an Apple OS issue that they are working with Apple to solve, and offer no time frame for when it will be fixed. "
Any idea on the timeframe or if there will be an anouncement when this is resolved?

HP Deskjet 2540 scan does not work with windows 10

my HP Deskjet 2540 scan does not work with windows 10, however, it still does eprinting. i need the solution and i haven't got it.

OK, More information. Installed Media Portal 1. This works with the tuner card without additional modification, so this appears to be some kind of issue with the software. Media Portal 1 does install a different version of Direct X, I don't know if that could have anything to do with it, but HP MediaSmart Live TV still comes up with the same error and will not run.

Hello, I have iMac from Oct, 2010 and have OS 10.6.7 and multiple users. Mail icon was accidently removed along with program. Mail 4.4 is on other users but when I reloaded software my user got Mail 4.3. Mail 4.3 did not work with latest OS. Ideas?Matt

Hello, I have iMac Itel i3, from Oct, 2010 and have OS 10.6.7 and multiple users.
About 3-4 days ago the Mail icon in dock had question mark and was accidently removed, along with program on my user. Oops.
1. Mail 4.4 is on other users and works fine, but for me it does not work and tells me V4.3 does not work with latest OS X.
2. I reloaded software from my user with original disks (Oct, 2010) and got Mail 4.3 again. Mail 4.3 did not work with latest OS. I am unable to load Mail. Gives Yellow error message.
" You have Mail version 4.3 (1081/1084). It can’t be used on Mac OS X Version 10.6.7 (Build 10J869). For more information, click the Help button."
3. Tried to update software and look for update for mail 4.3 on Apple site to no success.
Hate to go to MS-Entorage ( I may need to learn something new and alien) mail program since contracts are in Mail/Address Book.
Ideas?
MattDeeds

Matt,
I would download and run the 10.6.7 combo update.
http://support.apple.com/kb/DL1361
Regards,
Captfred

HT201343 I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and third generation loaded with the latest software. Can someone help?

I bought my macbook pro on August 2011 at an apple store, with the Intel i7. However mirrorring in not working with two of my Apple TVs. These Apple TVs are 2nd and 3rd generation loaded with the latest software. I can succesfully transmit from my itunes on my Macbook pro to both Apple TVs, but I can not see the airplay icon on the taskbar. Can someone help?

About AirPlay and Airplay Mirroring
AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
Several Apple Articles Regarding AirPlay
Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
How to set up and configure AirPort Express for AirPlay and iTunes
About AirPlay Mirroring in OS X Mountain Lion
iTunes 10- About playing music with AirPlay
Troubleshooting AirPlay and AirPlay Mirroring
Using AirPlay

HP Scan 3 software not working with MacOS 10.9 Mavericks

Similar Messages

Maybe you are looking for