HP Scan 3 won't work with OSX 10.9.2

I have an HP Deskjet 3050A All-In-One and recently upgraded to a MacBook Pro with OSX 10.9.2 Printer will print but scanner will not, error message about "checking with developer for compatiblity with OS" upon attempting to open. Latest printer scanner software listed in Apple Support for Print/Scan is Version 2.3.1 which is what I have.
I have run softwre updates.
Anyone have a solution?
This question was solved.
View Solution.

Hi @RoscoeSweeny
There is no full feature software and driver available from HP, but the OS X v10.9 Mavericks driver for your printer is available through Apple Software Update (ASU).
With this driver you can still print and scan, you just wont have HP software to scan from. Scanning to the computer from the printer control panel is only available when using HP Scan software, thus it will not work because there is no HP scan software as apart of the Apple Software Update driver.
Instead, you can scan using,
Method one: Scan from the Print & Scan window
Method two: Scan from Apple Preview
Method three: Scan from Apple Image Capture
I hope this helps. If you have any additional questions are have any difficulty using any of these methods, please let me know what method you are trying and what the issue/error is. You may also find the following document helpful; OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
Hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

Acer LCD screen won't work with osx?

I've just bought an Acer H243H LCD screen, and when i plug it in via HDMI, I get a 'no signal' message... Granted, I should have checked for compatibility before buying it, but my macbook plugs into out LCD tv via HDMI with no worries... Acer don't provide an osx driver, so I'm wondering of theres a genius out there who can help me make this work... It's such a pretty monitor, it'd be a shame to throw it out... Your help would be much appreciated.
Jake

Try connecting to the DVI port instead of the HDMI port. The Acer may not have a plug-and-display driver behind its HDMI port.

Acrobat Standard 6 won't work with OSX Lion

I just downloaded OSX Lion and my Acrobat Standard 6 no longer works. What to do now? I hadn't upgraded along the way, so how can I know get an application to create pdf files on my Mac?

Acrobat 6 Standard or deluxe are PowerPC Programs. They've been runing in an emulation mode called Rosetta since OSX.6 OSX.7 Lion is pure Intel only. and Rosetta has been discontinued.
If you need PowerPC applications You are either going to have to revert back to Snow Leopard. Or buy you an external Drive install OSX 6 or lower on it and run your PowerPC apps from there.
You may discover many of the applications you depend upon if you haven't kept them upgraded have quit work as well. You can do about the same thing with standard in The Mac Directly. Standard didn't have Forms capability.
Just go to Print Menu click on PDF and choose desired PDF. I would suggest though If you seriously want to have PDF and Forms Capability to Upgrade to AcrobatX. There is so much more you can do with PDF's than with 6 Standard.

Clamshell mode won't work with OSX Lion

I am running a 2010 13" Macbook Pro and a Dell ST2410 23" external display. I have been using an HDMI to mini displayport cable with this setup for over a year without a problem. Now my monitor goes dark when I try to setup the MBP in clamshell mode. I even tried to lower the resolution on the monitor to see if that would remedy it, and it won't display anything. This problem first started when I upgraded to 10.6.8, and now is giving me problems in 10.7. Help!

assuming that you have an external monitor (you said 23"), usb kbd & mouse. How do you start it up?
I always opened the lid, hit the power and quickly closed before the chime would sound. Do you boot OS X up, then close the lid? Or do you do it as I do?
My PB is on 10.6.8 and never had any issues, besides running a little hotter..

Canon MX7600 scanning won't work with Lion

Canon tech support tried downloading and installing latest software, throwing out old stuff, etc.., but finally concluded the problem lay with the operating system. Any thoughts?

Thanks for your response, Pahu. The scanner drivers are both installed. Also, I just downloaded and installed Apple's latest Canon printer drivers, released today, and restarted. When I open Image Capture it says "No scanner or camera attached." The printer is connected via USB and will print. Also, attempting to scan from the Canon Solutions Menu produces an error message: "The scanner driver supported by this software is not installed. Install it and then retry."
If I connect a NeatReciepts scanner, it does show in Image Capture and does scan.
I've opened a trouble ticket with Apple.

New ipod touch won't work with itunes 10.6.3 says it needs 11.1 but I cannot load that on my macbook using OSX 10.5.8 any way around this?

New ipod touch won't work with itunes 10.6.3, says it needs 11.1 or newer but I cannot load that onto my MacBook running on OSX 10.5.8 - is there anyway around this?

No. If your MacBook has an Intel processor you can update to OSX 10.6.8 and then install the latest iTunes.
A 5G iPod with iOS 7 requires that if you have a Mac you have OSX 10.6.8 or later.
You can get 10.6.8 here:
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft Office. Epson Scan, Canon software won't work with Lion OS

Microsoft office 2008 and later work fine on Lion. Office 2004 is a PowerPC application. PPC apps are no longer supported and Lion does not include Rosetta, which was required to run them on OS X. I imagine the Epson / Canon software you are trying to use is the same. Check with them to see if updates are available.

Will an epson photo 2400 scanner work with OSX 10.7?

Will an epson photo 2400 scanner work with OSX 10.7?
If so where do I get the drivers/software to run it?
I have used it with aquire, but only in flat bed scanning.
I am not able to use the film/slide mode anymore because the software that came with it is for 32 bit macine code.
Any ideas?

I realize this isn't a direct answer to your question, but I have an Epson Perfection 1670 flatbed scanner. I plugged it into a USB port after installing Lion, and it works fine with both the Image Capture and Preview applications. ("FIne", for me - I don't have a need for slide/transparancy scanning. Image Capture recognizes the scanner can do it, giving two modes for transparancy scanning, but in a quick and dirty test a minute ago it didn't seem to work. Since I don't need the capability, I'm not going to struggle with it to see what I've done wrong.)
Good luck
srb

Isight won't work in OSX, works in boot camp (XP SP3)

Hi everyone,
Within the last few weeks, my iSight camera stopped working. I went through every troubleshooting step recommended by Apple with no luck. I gave up hope and was ready to take it to the Apple store, but decided to see if it would work in windows... strangely enough it works great, but still won't work in OSX. I'd like to avoid taking it to the store, so any help is greatly appreciated!

Welcome to Discussions, bluejayDDS
... I'd like to avoid taking it to the store ...
You can the following three things (listed in order of increasing effort on your part) before seeking professional help:
(1) Apply the latest (10.5.7) Combo Updater using the following procedure:
• Backup all your important files.
• Use your Mac's Disk Utility to Repair disk permissions (different from repairing the "disk").
• Download and apply the Mac OS X 10.5.7 Combo Update.
http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
• Repair permissions again immediately following the restart that completes the install.
(Don't worry about corrections if Disk Utility reports that all repairs have been completed.)
• Launch only the OS X app you are trying to use with iSight and test to see if iSight works correctly.
Using the above process to apply the Combo Updater sometimes solves problems that occur after using your Mac's Software Update... to update Mac OS.
(2) If your problem still exists, reinstall OS X using the "Archive and Install" options explained here:
http://support.apple.com/kb/HT1710
Be certain that you have backed up all important files before you reinstall OS X.
(3) If your problem is not resolved by Archive and Install, you can completely Erase and Install all your Mac's software.
Erasing your iMac's hard disk and reinstalling all software as described in the Erase and Install section of http://support.apple.com/kb/HT1545 might correct a problem that remains after an Archive and Install.
Erase and Install is a lot of work, but sometimes it is the only way to get rid of something on the disk that is causing problems.
(4) If none of that works, see your Apple Service Technician for professional help.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Quark 7.5 won't launch with OSX Mavericks 10.9.1

QuarkXPress 7.5 won't launch with OSX Mavericks 10.9.1 I keep getting the window saying "QarkXPress quit unexpectedly" (see image below) and when I click on reopen, it does the same everytime. HELP!

Hi DCG,
hope oyu had a great christmas.
I posted the post you reference on June 11, 2013.
Since then a lot of things have happened. We released 9.5.4 several weeks ago, which seems to work fine for everybody under Mavericks.
We also posted an update for version 10 that makes it Mavericks compatible and afterwards released an update that fixes most issues reported.
So please try 10.0.2 or 9.5.4 on Mavericks, they should both work fine: http://www.quark.com/de/Support/Downloads/Search_Results.aspx?pid=1&oid=2&ftid=2
Thanks
Matthias

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

S-Video adapter and analog TV works with OSX 10.5 but not Boot Camp 2.1(XP)

I bought a mini-DVI to S-video or composite adapter to use with an older analog TV. Works great with OSX 10.5 no problems. However, I currently have Windows XP running with Boot Camp 2.1 and it wont work with the TV. If I ever get an image it's three black and white fuzzy and distorted iterations of the monitor.
Since it works with OSX but not with XP i'm thinking its some sort of boot camp issue and not a problem with the hardware or adapter. Therefore, it should be solvable, right? Does anybody know how to fix this? Will upgrading to snow leopard and boot camp 3.1 solve it?

Perform a custom install from the Mac OS X 10.5 disks and install only that component if possible; if not, use Pacifist to install it. In either case, rerun the combo updater for your Mac OS X version afterwards.
(38032)

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter.

My Viewsonic monitor won't work with the Imac using the Mini Port to DVI adapter. I also tried the HDMI to DVI adapter ane the Mac-Mini with same result. The monitor does work on my older Macbook Pro that has the DVI connector. Is it a Software/Driver issue ?

Should be extremely simple, please carefully read Connect multiple displays to your Mac. If you still have problems then it's probably a cable issue that would be resolved by replacing the adapter cable. You should be using this adapter. If you are using a third party adapter that might be your problem!

HT1338 Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Presently running mac osx 10.5.8. Recent Firefox update says it no longer works with osx 10.5 and it's no longer supported by apple. Any suggestins?

Use an earlier version of Firefox, use Safari, or upgrade to a later version of OS X. Any Intel Mac can run Snow Leopard.
Latest version of Safari for Leopard: http://support.apple.com/kb/DL1422
Information for Firefox: http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-power pc
http://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-x-10-5

HP Scan 3 won't work with OSX 10.9.2

Similar Messages

Maybe you are looking for