HP Scanjet 5000 and Windows 7

Hi - I have an HP Scanjet 5000, running through a TP-LINK TL-310u MFP & Print Server installed on a Windows XP machine and it works perfectly apart from the fact the user complains about the PC slowing down whenever anyone Scans a document.
So I'm trying to move it onto a Windows 7 machine. And it's *almost* working. From the Windows 7 PC I can quite happily select a users profile (all our users have a profile set with a destination unique to them) and scan a document and it's put in the correct place. However, our users like to scan from the scanner itself by selecting their profile on the LCD and pressing one of the buttons. This is the bit that doesn't work.
I've checked in Devices & Printers -> Scan Properties -> Events and the scan button is set to 'HP Scan Dispatch 3' Not sure if this is correct (other options are 'HP Scanjet 5000 - Scanner Tools Utility') but the other option doesn't work and furthermore stops me being able to scan using profiles from the PC.
In the utility, 'Disable front Panel Buttons' is NOT ticked.
When I connect it back to the Windows XP PC it works straightaway, so I think it's something to do with Windows 7.
Help!
Tony McMahon

I've taken the TP-Link device out of the loop now, and connected directly via USB. I'm still experiencing the same issue - can scan from within the software, but the buttons don't do anything.
It seems to be something to do with the 'HP Scan Dispatch 3' that in the registry is set to use:
C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\5000 (L2715A)\hpScanDispatch3.exe Scan# /StiDevice:%1 /StiEvent:%2;
I don't know what the parameters are supposed to be, but this program simply isn't launching. The other option available under 'Events' from 'Devices & Printers', does start the Scan Utility program, but this isn't the behaviour I'm after - it should perform the scan and save the pdf in the destination without any user intervention.
Any help gratefully received, hopefully whilst I still have some hair left...

Similar Messages

ScanJet N6350 and Windows 10 - Won't Install

Has anyone been able to install the ScanJet N6350 and its associated drivers and tool set in the release version of Windows 10 64-bit Enterprise Edition? I have tried the original CD and the updated install from HP's website. Both either hang or crash.

I was able to get my HP Envy 4500 printing wireless on Windows 10 by right-clicking the installation program and selecting "Troubleshoot compatibility". Use the recommended settings, which for me was Windows 7. I believe you can also specify which compatibility mode to run the program with in Properties > Compatibility if you prefer that route.

HP Scanjet G4050 and Windows 7 Home Premium Ver 6.1

I bought the G4050 photo scanner years ago and it worked fine with my old laptop windows XP operating system for the time I had it. But shortly after, I upgraded my laptop to a Dell XPS with a Windows 7 Home Premium. I've never been able to use my scanner since and its been sitting in a box for years now collecting dust. Is there anyway I can make the G4050 work with my Dell XPS lap top which operates with Windows 7 Home Premium operating system? Or am I better off bringing the scanner to the dump after only having ever used it a couple of times. All this new technology has made life very much more complicated if you ask me.

Hi there @yvans2105,
I saw your post about the issue you are having with using your Scanjet G4050 Photo Scanner with your Windows 7 system.
My suggestion is to download and run the full driver and software and install the scanner on your computer. You should be able to use it afterwards!
HP Scanjet G4050 Photo Scanner Full Feature Software and Driver
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

ScanJet 4850 And Windows 8.1

I purchased the HP Pavilion 500-336 1 week ago (Windows 8.1). After setting up my Lexmark Printer. My next task was to setup the the HP ScanJet 4850. First I tried using the installation CD; which failed. I then tried to down load the new driver and utility both 64 bit and 32 bit. Currently I am getting and error “An error occurred while communication with scanning device”. Is there something I am missing? Can someone direct me to a solution?

I did download and ran the scan doctor. the scanner did not show on the list of devices.
Thanks anyway
lilbreez

Scanjet 5370CSE and windows 8.1

I know it's an old scanner, but it has been working greated with XP and I hate to ditch it. Can it be made to work with windows 8.1?

Dear Thegrey,
This product may be compatible with select third-party software. For more information about scan software alternatives, go to Third-party scanware solutions:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03479564&lc=en&cc=de&dlc=en&product=59548
If these alternatives do not work, consider an upgrade to a newer HP product that will work with Microsoft's newer operating systems.
Great to hear that this scanner has lasted a long time for you.
Best,
aricari
I work on behalf of HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS THUMBS UP on the left to say “Thanks” for helping!

Connect scanjet 4670 to windows 8

is there a driver I can use to connect scanjet 4670 to windows 8

Hi,
Please read:
http://h30499.www3.hp.com/t5/Scanners/hp-scanjet-4670-and-Windows-8-incompatibility/td-p/5923129#.VO...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Slate 5000 and SP1

Could not load SP1 on my HP Slate 500 with Windows 8. I talked to support and they recommended a manual load instead of using Windows Update on the Microsoft site. The manual load worked. Reference support case[Personal Information Removed]?

I've taken the TP-Link device out of the loop now, and connected directly via USB. I'm still experiencing the same issue - can scan from within the software, but the buttons don't do anything.
It seems to be something to do with the 'HP Scan Dispatch 3' that in the registry is set to use:
C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\5000 (L2715A)\hpScanDispatch3.exe Scan# /StiDevice:%1 /StiEvent:%2;
I don't know what the parameters are supposed to be, but this program simply isn't launching. The other option available under 'Events' from 'Devices & Printers', does start the Scan Utility program, but this isn't the behaviour I'm after - it should perform the scan and save the pdf in the destination without any user intervention.
Any help gratefully received, hopefully whilst I still have some hair left...

HP Scanjet 4890 and MBP - HP software crashes

I bought this Scanjet via Applestore.
It was easy to set up. It will happily scan a small photo and it will also work, using the HP copy utility, as a photocopier with my HP printer via the MBP.
However, if I try to scan a whole A4 page of handwriting, it crashes during the save stage (wanted to PDF the page so I could email it). This happens regardless of whether you change to greyscale, to black and white, to a different resolution.
Presumably it would like more memory... Anyone here know anything about the HP scanjet/Photosmart software and what might cause it to crash in this way when other functions are OK? I have posted on the HP site and if I get anything back from them I'll post it here.
Imogen

This reply from HP email support solved my problem. I thought that their technical support was very good, better than Apple's.
Dear Imogen,
Thank you for contacting HP Total Care.
I am sending you steps to do a manual uninstall for the scanjet. Please
read the NOTE at the end very carefully.
Unplug the USB cable before starting the uninstall.
To complete a full uninstall in OS 10 or higher, refer to the steps
below:
Run the Uninstaller application:
Open the Macintosh Hard Drive. (Usually displayed as MAC HD)
Open the Applications folder.
Open the Hewlett-Packard folder.
Open the HP Photo and Imaging Software folder.
Open the HP Uninstaller application.
Select Uninstall All Products, click Next, and then click uninstall.
Open the Hard Drive/Library/Preferences
*drag the loginwindow.plist to the desktop
Removing login items:
Open the Apple menu by clicking on the apple icon located at the top of
your screen.
Open System Preferences.
Open Accounts.
Open Login Items.
Highlight the HP Scanjet Manager, and then click Remove.
Restart the Macintosh.
Removing preferences from the User Profile:
Open the Macintosh hard drive. (This is usually labeled Macintosh HD)
Open the User's folder.
Select the home user(This will be shown with a house icon next to it).
Open the Library folder.
Open the Preferences folder.
In the Preferences folder, locate and remove all of the following
preferences:
com.hp.photo.director.plist
com.hp.scanjet.pro.plist
com.hp.photo.gallery.plist
HP PS Pro Preferences
HP Scanjet Button Preferences
HP Scanjet Destinations
HP Scanjet Copy
hpEmailPrefs
Drag these files to the Trash.
Removing application support:
Open your Macintosh hard drive (Usually titled "Macintosh HD".
Open the Library folder.
Open the Application Support folder.
Drag the HP folder to the trash.
Removing extensions:
Open the Macintosh hard drive (this is usually labeled as 'Macintosh
HD').
Open the System folder.
Open the Library folder.
Highlight the Extensions folder.
Simultaneously press the Apple Key + I.
In the window that displays, click the arrow beside Ownership and
Permissions.
Click the Lock icon to unlock permissions.
Click Owner.
Click your current username, which should have 'me' in brackets next to
the name.
Within the Extensions folder, locate the files hpAccess.bundle and
hpPlugInInit.kext and drag them to the Trash.
Empty the trash.
Click on the Lock icon to lock the permissions.
Do a Repair Disk Permissions. To do so, open the Hard
Drive/Applications/Utilities/Disk Utility. Select your hard drive on the
left had side. Make sure First Aid tab near the top has been selected.
Click on Verify Disk Permissions. Wait until you get a message stating
it is done. Click on Repair Disk Permissions. Wait until you get a
message stating it is done.
NOTE: Once the uninstall has been completed, unplug the power cord from
the scanner before installing the new driver. Once the installer is
complete, you will receive a message stating that the software has been
successfully installed. Select quit and allow the Macintosh to restart.
Once the Macintosh restarts, plug in the USB cable followed by the power
cord. RESTART THE COMPUTER before running a test scan.
Here is the link for the latest drivers. Please go to Step 3 and select
Download Only. When the download is complete, close all applications and
programs. You should have a new Icon on your desktop. Double click on it
and follow the prompts.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=sj
-41059-1&lc=en&cc=us&dlc=en&product=446436&os=219&lang=en

Help install hp scanjet 4670 on windows 8.1

help install hp scanjet 4670 on windows 8.1 Have A Sony Vaio Tap 20. On Board Windows 8.1(64-bit). Have a scanner HP Scanjet 4670. How to make friends with these two devices? Poke his nose into the right drivers and software. Thanks in advance!!

Есть Sony Vaio Tap 20. На борту Винда 8.1. Есть сканер HP Scanjet 4670. Как подружить эти два устройства? Ткните носом в нужные драйвера и ПО. Заранее благодарен!!!

Need expert help with HP Scanjet 8200 with Windows 7

I've tried to download drivers to use my HP Scanjet 8200 with Windows 7 without success.

hi,
you can download the windows 7 drivers from this link.
what error shows when you try to install the software?
You have to note the system type that the windows 7 is running.
Is it 64-bit or 32-bit.
l0ri3
~Though i work with HP my posts and replies are my own and not from HP.~

Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

With my windows 8.1
If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
the windows can't open unless I uninstalled one of them
but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
and the most of games Intel can run it but AMD can
Help !!
Now I'm installing The two cards but if i restarted my laptop it wouldn't run
The photo show that ...
http://www3.0zz0.com/2015/04/07/21/289209638.png

Hi there @ZezoOo
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
Please see the following, for some guidance. HP Products - What If I Don't See My Operating System?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Hp scanjet 5000 scan profile to button

Hello all. I have a HP Scanjet 5000. I used to be able to scan by pressing a physical button on the scanner that had the profile to scan. I have recently moved to a new office and installed the scanner onto a new computer. I am unable to scan from the scanner itself but have to open up the HP Smart Document Scan Software and click the scan button. That being the problem, I now have Scanner Tools utility- HP Scanjet 5000 (L2715A) open. I can see profiles for [HP copy profiles] and [Other Application profiles] but under [HP scan software profiles] it says "No profiles available. The HP smart Document Scan Software is not Installed." I am unable to to create or add new profiles to [ HP Scan Software Profiles] so I can add to the [Scanner LCD Profiles]. So in summation, I am trying to add a scan profile to [Scanner LCD Profiles] so I can scan pressing the button on the scanner. I hope I am clear in my explanation. Thank you in advance. -Secure80

I have the same problem on a scanjet 7000

Problem with Sessions and window.open

Hi,
Hi everyone,
Help Please!!!
I am working with Sevlet session objects and HTML forms and windows. I have an HTML form for the user to supply a username and password. Once the user clicks submit I need to open another browser window that has no toolbar, no location, no status bar, etc. The user should also be able to go back to that login screen and login again and open a 2nd, 3rd, etc. instance of the application. My problem is that each application is being asigned the same sessionId. I believe it is being asigned to the main login window and thus to the other child windows it opens. Is there a way to work around this? Do I need to make the user open another browser window to login? I need to be able to let the user open multiple instances of the application with unique session ids for each.
Any insight is GREATLY appreciated on this topic. Anything you can tell me about sessions (Java), IE, window.open would help greatly!
THANK YOU IN ADVANCE!!!
MA

To achieve this, you must introduce another level of
abstraction to the Servlet specifications. When you
work with JSP/Servlets you use mostly the HttpSession
to handle user related tasks, and the aplication
context, for things that are common to all users. But
inside the HttpSession scope, you want to create
containers that have 'smaller' scope and are uniquely
identified.
A ipothetical scenario :Let's say that you must have
multiple connections to several databases, on each
database user rights beeing diferrent, and you must be
able to track user actions globaly, and eventualy
capture a 'Close Application event' and close all db.
connections.
1. when the user first accesses the login frame create
the HttpSession. In the HttpSession object, store a
Hastable (let's call it 'ConnectionTable'). Each
object in the Hashtable must identify uniqely a
database connection. Now, to create unique identifiers
ids, make the keys in the hashtable java.lang.Long
objects, created using System.getCurrentTimeMillis().
This guaranties there will be no possible confusion.
From each new open window, on each request to the
server, along with the usefull parameters, send the
connection identifier. When proccessing the request,
select the object from the Hastable wich corresponds
to the ID.
2. Now, the values in the ConnectionTable, must act as
the containers that I mentioned in the first
paragraph. The simplest way to do this is to have
again a Hashtable derived class to do the job, wich
exploses methods similar to HttpSession: setAttibute (
Object key, Object value) and getAttibute ( Object
key, Object value). This container may use internally
a Hashtable to store object, and explose only the
getAttribute and setAttribute methods for clarity. Any
way, this is a problem of implementation. Let's call
this class CustomSession.
Now, a textual activity diagram:
1 user accesses the main page, you start a new
HttpSession; In the HttpSession object, store the
ConnectionTable object.
2. the user enters the userID and pwd and adatabase
name, and a new window is opened. Let's supose the
data entered is valid.
3. when you process the login data, you create a new
CustomSession object. you put in it whatever you would
put in your HttpSession. You generate a unique
identifier using System.CurrentTimeMillis(). Put the
CustomSession object in the ConnectionTable, using the
generated id as key. Send the response.
..... later on .....
100. the user asks for a particular action to be
performed - e.g. a row deletion. The page contains a
form with text field where the user introduces the
row number, a submit button and a hidden input with
the ID.
101. you process the data. Get the ID from the request
object, get the ConnectionTable from the session, get
the CustomSession using the ID as key, do whatever
your logic was doing, but obtaining the objects from
the CustomSession instead of HttpSession
NicNic,
Very slick idea. I think that it could work and it seems that there would be not security issues because the id that you would store on the client side is the Unique Identifier and not the actual Session Id. Do you forsee any security issues for this implementation?

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

HP Scanjet 5000 and Windows 7

Similar Messages

Maybe you are looking for