HP Scanjet G4050 in Windows 7 (64 bit) Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]

HP Scanjet G4050 does not get well installed in Windows 7 (64 bit).
Running the programme "HP Print and Scan Doctor". Result: Errors translated for you from Dutch, so I do not have the original error formulation:
Device control: correct
Warning in Control Driverprogramme "There is no communication between the driver and the device.
Windows (WIA)-scan: correct
Warning in HP Twain Scan Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]
Register: correct
Warning in HP Scan Flow Manager: part of the software is not installed. Uninstalling (even deep uninstalling) and reinstallation of the drivers and software does not change the results.
Prepanel testing: Everything is allright with your scanner ,although not all tests could be performed.
You can scan with Microsoft Paint.
In addition:
Firewall off - did not help.
Deep uninstallation and reinstallation: did not help.
Is there anybody with an idea about how to identify and obtain the missing elements in my downloads?

In addition:
When checking the installed files, there is nothing called "SolutionCenter".

Similar Messages

Installation issue with Scanjet G4050 with Windows 8.1 64 bit

I have recently replaced aa old PC with an HP Envy 23, operating system windows 8.1, 64bit. I am now trying to install my Scanjet G4050. Having downloaded the software HP Scanjet G4050 Photo Scanner Full Feature Software and Driver I am now trying to run it. Two hours after starting the install it is still at 'checking system' and has not progressed. This is the second attempt, having tried last night and had to stop after an hour with it still 'checking system'. I have (temporarily) switched off antivirus/firewalls in case they were an issue. I had no issues with this installation in the past on Vista.
Any ideas what to try next?

@barkerlee
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Installed iTunes 10.2.1 for Windows (64-bit), Error 7 Windows 998

Hello
After updating iTunes 10.2.1 for Windows (64-bit)I am getting the dreaded iTunes was not installed correctly, Please reinstall iTunes. With error 7 (Windows error 998) popups.
Tried already all the known uninstall/install/repair suggestions. Tried runnng as administrator or changing permissions. Tried disabling Bonjour Service.
Until now nothing has repaired it.
Is there a way to fix this? Can it be an Adobe update?
Is there a way to get an older version?

I had the same problem. I tried doing a system restore to a day or 2 before i did the update. The restore was successful but the itunes problem remained. After that I went into the control panel, selected itunes and clicked the repair tab.
It now works fine for me. The only other step I took was to copy my itunes folder into another location in case anything went wrong. Once the repair was complete I simply replaced the new empty itunes folder with my previous one.
Hope this is of some help.

HP Scanjet G4050 and Windows 7 Home Premium Ver 6.1

I bought the G4050 photo scanner years ago and it worked fine with my old laptop windows XP operating system for the time I had it. But shortly after, I upgraded my laptop to a Dell XPS with a Windows 7 Home Premium. I've never been able to use my scanner since and its been sitting in a box for years now collecting dust. Is there anyway I can make the G4050 work with my Dell XPS lap top which operates with Windows 7 Home Premium operating system? Or am I better off bringing the scanner to the dump after only having ever used it a couple of times. All this new technology has made life very much more complicated if you ask me.

Hi there @yvans2105,
I saw your post about the issue you are having with using your Scanjet G4050 Photo Scanner with your Windows 7 system.
My suggestion is to download and run the full driver and software and install the scanner on your computer. You should be able to use it afterwards!
HP Scanjet G4050 Photo Scanner Full Feature Software and Driver
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanjet G4050 and 64-bit MS Windows 7

My Scanjet G4050 will not work with MS Windows 7. It performs fine under XP. The problem seems to be that the HP interface reports not being able to see the device. There is, however, connumication with the device on some level since I can hear it responding to some initial commands from the computer. The error HP error messages are unhelpful. Any ideas?

Hello there,
To get your issue more exposure, I would suggest posting it in the commercial forums since your product is a commercial product. You can do this at Commercial Forums - Scanners.
Enjoy your day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Scanjet G4050 Doesn't Scan - Software Component not found error message

Problem:
I have installed and un/installed the software for this Scanjet G4050. It aways completes the installation successful. All seems fine until I push the SCAN Buttion on the scanner. It launchs the software then abruptly displays an Error! window which says "A required software component was not found..." then says to reinstall the software. I unistall the software and reinstall with exact same results at least 4 times. I have downloaded the lastest software from the download HP web page with exact results. The error info listed is 8,[(8,0,0)].
The COPY button and software works. I can scan preview the same photo in the copy mode, crop it, etc. and print it, but the SCAN button always fails with the Error! message. I think I can throw this HP Scanjet G4050 scanner a good 25 feet. But before it gets launched.... hmmm... maybe Yardapult?
This is a Windows XP (SP3), Dell Precision 360 system.
9/16/14 After following the Waterboy71's suggestion to post this on the Commercial Forums with zero resulsts, I finally threw in the towel. (I need this scanner for work) Returned the Scanjet G4050. Bought and Epson V550. Scanned the very 1st time. Now I can get back to work. I should have pulled the plug sooner. There's just seems to be too many problems with the G4050. What has happened to HP?

Hello Edmo13,
Welcome to the HP Forums.
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Scanjet G4050. Get "Error 1706.No valid source could be found for product ScannerCopy...."

I just bought a new Scanjet G4050 and when I try to install the software I get an error message and the software will not install. Error message is:"Error 1706.No valid source could be found for product ScannerCopy. The Windows Installer cannot continue." During the install, I was prompted to enter a CD or other location to load ScannerCopy.
I had an older version of this same Scanjet G4050 working on my PC about a year ago. My PC is running Vista 64.
Any ideas how I can get the software to successfully load? Any ideas of where I can get this "ScannerCopy" that the software is asking for?

Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/

OBIEE 11g on Windows 7 64 bit - Error while configuring????

Hi Experts,
I am installing OBIEE 11g on Windows 7 64 bit. And I followed below steps:
1. Installed JDK 64 bit.
2. Installed Weblogic Server with 64 bit JDK.
3. Installed OBIEE 11g - Software only Installation.
4. Ran configuration script. cofig.bat.
5. Configuration Wizard opened and during the configuration process(step 10 of 11) got an error. Refer below screen shot for the error.
6. I got the same error when I tried installing 11g on Win server 2003 32 bit and I installed JRocket MissionControl and reinstalled 11g and there are no errors.
7. So, remembering that I installed JRocket Mission Control 64 bit.
8. Un installed previous 11g.
9. Reinstalled 11g on Windows 7 64 bit.
10 And coming to configuration part it gave same error. Don't know what to do.............can any one help me at this point.
http://img690.imageshack.us/img690/1342/obiee11gconfigerror.jpg
Thanks in advance,
DK

Hi All,
I've got the same error but with the installation of OBIEE 11g on Windows 32-bit.
I also tried to continue the installation, but I've got another error in the Executing: opmnctl start coreapplication_obisch1.
Even with those errors, I finished the installation but of course I've some problem with the presentation server and webLogic, becasue they're not configured properly.
Any idea how to solve the problem?
Thanks

HP Scanjet G4050 won't scan negatives or or individual pictures Windows 8.1

I have an HP Scanjet G4050 that will not scan negatives or individual pictures. It worked great with my Windows XP.

Hi,
Please try for Windows 8:
HP Scanjet G4050 Photo Scanner
Otherwise, well - use a computer with older Operating system to scan.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Scanjet G4050 won't scan negatives or individual pictures Windows 8.1

I have posted recently, but I can't find it. I have MANY times tried to download everything I can find for my scanjet and it won't work. Then it said to uninstall completly and start again. I cannot uninstall it completely. Now there are drivers missing and such. I appreciate the persons who have tried to help, but I still need help or go and spend another $40. My notebook is an HP and so are my all-in-one eStation and scanjet.

Hi @Jiggerjo
I would like to help you with the scanning troubles you are having. Please try the following steps;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Uninstall the software again - Uninstalling the Software Instructions
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and install the software for your Scanjet again. HP Scanjet G4050 Photo Scanner Drivers
You mentioned, you have posted recently and can't find it, use the following link to find all of your previous posts; Latest Posts by Jiggerjo
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Error installing MaxDB 7.6.03.09 on windows 32 bit on NW70 SR2 sapinst

MaxDB experts,
Hello. I am trying to install SAP NW70SR2 (JAVA AS) on MaxDB 7.6.03.09 with windows 32 bit OS. Brand new install, JAVA AS central system.
Our problem is in the SAPINST phase:
Install database server software
I see this in the sapinst.log file:
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
ERROR      2009-04-09 16:19:41 [iaxxinscbk.cpp:282]
           abortInstallation
MDB-07020 The database installer reported an error. Some database applications are probably still running. Check the log file sdbinst.log.
And this is in the bottom of the sdbinst.log file
starting installation phase of package Base 7.6.03.09 32 bit
ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
installation exited abnormally at Th, Apr 09, 2009 at 16:19:41
The sdbinst.log has lots of other interesting info:
This is the top of the file:
Installation of MaxDB
+     ***********************+
starting installation Th, Apr 09, 2009 at 16:18:56
operating system: Windows I386 NT 5.1 Service Pack 3
callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
starting preparing phase of package Base 7.6.03.09 32 bit
getInstalledReleasesWin(): wrong version format
checking interferences to other packages... ok
I'm not sure why there is a version info problem.
This is a windows PC I'm trying to put this on. It's 32 bit so that is why I had to get the SR2 DVDs. The SR3 DVD won't let you install via 32 bit OS.
I downloaded all the software from OSS marketplace and some from our delivered DVDs:
We have these DVDs
32 BIT BS_2005_SR2_SAP_Installation_Master 51033208
32 BIT NW_7.0_SR2_Kernel_WINDOWS__LNX_X86 51033262
NW 7.0 SR2 SAP Installation Export 51032246
NW 7.0 SR2 SP09 Java based SW Comp 51032257
I pulled this down off the marketplace (in the NW70SR3 area)
32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10
I've searched all through OSS/SDN for someone who has this same issue. All our other systems are AIX/oracle so trouble-shooting MaxDB is completely new to me.
Can anyone point me into the right direction to get this figured out? I'm tried just re-running the install, same error. And removing the c:/sapdb/programs, no good.
Thanks!
Nick

Natalia,
Here is the entire Install log for MaxDB. Also remember that this was called as part of an SAP system install:
MaxDBServer_install-10.04.2009-10.05.log
INSTALLER_INFO: Version = 7.6.03 Build 009-123-163-622
INSTALLER_INFO: Changelist = 163622
INSTALLER_INFO: MakeId = 267230
INSTALLER_INFO: Type = kit
SYS_INFO: Host name = DGW58J1L
SYS_INFO: System = Windows
SYS_INFO: Architecture = I386
SYS_INFO: Version = NT 5.1
SYS_INFO: Subversion = Service Pack 3
CALL: SDBINST -indep_prog C:\sapdb\programs -indep_data C:\sapdb\data -depend C:\sapdb\CEL\db -profile Server -b
STDOUT:
     Installation of MaxDB
STDOUT:      ***********************
STDOUT: starting installation Fr, Apr 10, 2009 at 10:04:43
STDOUT: operating system: Windows I386 NT 5.1 Service Pack 3
STDOUT: callers working directory: C:/Program Files/sapinst_instdir/NW04S/SYSTEM/ADA/CENTRAL/AS
STDOUT: installer directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT: archive directory: S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386
STDOUT:
MSG: debug package SDBBAS.SDB is valid
MSG: debug package SDBKRN.SDB is valid
MSG: debug package SDBUTL.SDB is valid
STDOUT:
starting preparing phase of package Base 7.6.03.09 32 bit
STDOUT: -
MSG: service "sql6" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: service "sapdbni72" in "C:/WINDOWS/system32/drivers/etc/services" found
MSG: InstallRegistry: space check ok: 127249572 kb on C: (156288320 kb total) available
MSG: install registry successfully locked
MSG: read 12 PACKAGES
MSG: net registry size = 121301 bytes
MSG: InstallRegistry: reserved 1024 kb disk space
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent data path: c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBBAS.TGZ"
STDOUT:
package Base successfully checked
STDOUT:
starting preparing phase of package SQLDBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package SQLDBC 76 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dbc path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SQLDBC76.TGZ"
STDOUT:
package SQLDBC 76 successfully checked
STDOUT:
starting preparing phase of package Fastload API 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: fastload path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/FASTLOAD.TGZ"
STDOUT:
package Fastload API successfully checked
STDOUT:
starting preparing phase of package PCR 7104 7.1.04.45
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7104.TGZ"
STDOUT:
package PCR 7104 successfully checked
STDOUT:
starting preparing phase of package PCR 7300 7.3.00.59
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7300 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7300.TGZ"
STDOUT:
package PCR 7300 successfully checked
STDOUT:
starting preparing phase of package PCR 7301 7.3.01.22
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7301 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7301.TGZ"
STDOUT:
package PCR 7301 successfully checked
STDOUT:
starting preparing phase of package PCR 7403 7.4.03.49 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7403 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7403.TGZ"
STDOUT:
package PCR 7403 successfully checked
STDOUT:
starting preparing phase of package PCR 7500 7.5.00.46 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: precompiler 7500 path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/PCR7500.TGZ"
STDOUT:
package PCR 7500 successfully checked
STDOUT:
starting preparing phase of package SAP Utilities 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: : c:/sapdb/data
STDOUT: independent program path: c:/sapdb/programs
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SAPUTL.TGZ"
STDOUT:
package SAP Utilities successfully checked
STDOUT:
starting preparing phase of package DB Analyzer 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package JDBC 7.6.03.03
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Server Utilities 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Database Kernel 7.6.03.09 32 bit
STDOUT: -
STDOUT: checking interferences to other packages... STDOUT: ok
STDOUT: collecting data finished:
STDOUT: dependent path: c:/sapdb/cel/db
STDOUT: start extraction test run of "S:/NW70SR3-MAXDB-INSTALL/Extracts/32 BIT RDBMS_MAXDB_7.6.03_Build_09 51033492_10/DATA_UNITS/MAXDB_WINDOWS_I386/SDBKRN.TGZ"
STDOUT:
package Database Kernel successfully checked
STDOUT:
starting preparing phase of package Redist Python 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Loader 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package Messages MSG 0.5603
STDOUT: -
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT:
starting preparing phase of package ODBC 7.6.03.09 32 bit
STDOUT: -
WRN: try to install release "7.6.03.09" over existing "7.6.5.9"
MSG: update test: installed release newer
MSG: update from "7.6.5.9" to "7.6.03.09" not allowed
STDERR: cannot downgrade package
STDOUT: skipping package
STDOUT: checking filesystem "C:"... free disk space ok
MSG: available = 127248680 kb
MSG: needed = 339145 kb
STDOUT:
starting installation phase of package Base 7.6.03.09 32 bit
STDOUT: -
STDERR: ERR: InstallRegistry::newPackage(): can't add Package "Base" -> "c:/sapdb/programs": already exists!
STDERR: installation exited abnormally at Fr, Apr 10, 2009 at 10:05:29MSG: packagedata of package SQLDBC not changed
MSG: packagedata of package DB Analyzer not changed
MSG: packagedata of package JDBC not changed
MSG: packagedata of package Server Utilities not changed
MSG: packagedata of package Redist Python not changed
MSG: packagedata of package Loader not changed
MSG: packagedata of package Messages not changed
MSG: packagedata of package ODBC not changed
MSG: writing 12 packages
MSG: net install registry size = 121301 bytes
MSG: wrote install registry (141250 bytes)
MSG: install registry successfully unlocked

HP Scanjet 200 software on 32 bit Windows

Hi guys,
I have a HP Scanjet 200.
I'm trying to install the scanjet software on a 32 bit windows 7, but it seems that it works only on 64 bit systems. Has anyone been able to install it on a 32 bit machine? I'm talking about the sofware and not the driver. I have installed the driver without problems but I would like to have the software as well.
I appreciate any help.

So even though it does not install properly, you get files on your system for the installation?
Clean them out again. IF you can see the software in the list of Uninstall Programs in Windows, then use REVO uninstaller (free version) to do it.
Run Ccleaner registry cleaner
Remove anything left over in AppData, etc.
Just like before. Make sure all files are removed.
NOW try installing from Safe Mode to see if it will install. Safe Mode will turn off all but just the minimal things needed to run Windows. Perhaps an Anti-Virus suite is preventing it.
Did you redownload the software to make sure you have a good copy?
Tap the F8 key on start up (depending on what computer your have) to get the Safe Mode options and choose Safe Mode.
Alternative:
IF you have the Run box enabled in Win 7, go to Start/Run and type msconfig.
in the system configuration window that opens, select the Boot tab and tick the Safe Mode or Safe Boot box with Minimal. Click Apply and restart your computer.
IF you get a bios screen asking which version of Safe Mode to open, choose the first one.
(after your done working in Safe Mode, go to the Configuration box and untick the Safe boot box to restart in Normal mode).
Windows should start in "Safe Mode" now.
Relaunch the installer to see if it works.

RW-50004 error when installing Oracle EBS 12.1.1 on Windows 32 bit, 2003

Hi All
I am installing Oracle EBS 12.1.1 for Windows 32 bit on a Windows 2003 server, my pre-requisite checks have gone through successfully when checked by the oracle ebs installer.
However during the installation process i get RW-50004 error and the installation stops, the log file seems to have the following last entries
Mon 07/04/2011
05:05 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Skipping Profile Phase
Skipping Apply Phase
adcvmlog.xml renamed to C:\oracle\VIS\db\tech_st\11.1.0\appsutil\log\VIS_99a4659\adcvmlog.xml.07041705
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[SETUP PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: C:\oracle\VIS\db\tech_st\11.1.0\appsutil\install\VIS_99a4659
adsvdlsn.cmd INSTE8_SETUP 9020
AutoConfig is exiting with status 1
RC-50014: Fatal: Execution of AutoConfig was failed
Raised by oracle.apps.ad.clone.ApplyDBTechStack
Can some one please help me on what I am missing or how can i correct this. Thank you.

adsvdlsn.cmd INSTE8_SETUP 9020Search AutoConfig log file for adsvdlsn.cmd and you should find more details about the error.
Please see if (Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process. [ID 418109.1]) is applicable.
Also, please run md5sum as per (MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1)) to verify the integrity of the stage area directory.
Thanks,
Hussein

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this?

I downloaded the Windows 64-bit version of iTunes, but the application won't run. It comes up with Apple Application Support - Error 2. How can I fix this? I have uninstalled and reinstalled it several times and it still doesn't work.

What computer do you have? is it 32 or 64 bit operating system?

When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?

Hello,
When trying to run CS5 (64 bit) on Windows 7 get error failed to initlialize COOLTYPE ?
Any ideas ?
I tried re-installing CS5 Master collection but that failed as well.
Running out of ideas
Richard

I have the same problem, and while I can 'fix' it with the approach described here, I have to 'fix' it that way EVERY TIME I launch itunes. I suppose the lousy support for mainstream computers is apple's way of saying, 'well of course you can't use your phone, you're not living in a (TM) apple home (TM) please sell your existing home and purchase one from apple if you want your phone to work.' I never would have imagined that as a computer programmer it would be a multi-hour/failed installation process to get iTunes and the iPhone4 working properly. What a joke.

HP Scanjet G4050 in Windows 7 (64 bit) Error specification 4,[(2,0,8004154),(0,0,0),(3,56,0)]

Similar Messages

Maybe you are looking for