HP scanner showing read only from Mac after software upgrade to OSX 10.9.1

I recently updated my IMAC software to OSX 10.9.1 and I am unable to scan and sent material from my HP Photosmart scanner. It says it is "read only". How can I change so that I can scan and email documents?

http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03967500

Similar Messages

My External Hard Drive shows Read only in mac but in windows its not

when I connect my WD HDD External to my mac book it shows that Ur EXT HDD is right protect and read ONLY, but when I switch to the windows os U can copy delete and any thing U want, how can I remove this issue from my HDD ? I want to copy to the HDD in mac but I cant

Your external HD is formatted with the NTFS file system. OS X can read but not write to the NTFS file system.
To be compatible with OS X and Windows it would need to be formatted with the FAT32 file system.
Alternately you can install a 3rd party driver to give OS X the ability to write to the NTFS file system. One of them is
http://www.apple.com/downloads/macosx/system_disk_utilities/ntfs3g.html
I don't know how well it works.
There are other drivers available.

Can i restore my pics from icloud after software upgrade?

How can i restore my photos from i cloud? i lost everything after upgrading to ios6, plz help me, i only found 200 pics out of 3000, i am really disappointed

If they were in the camera roll when you last backed up, restoring the entire backup should recover them.

Cisco Profile 52/55 Dual - displays video on only one screen after software upgrade 7.1.4

Hi,
I've upgraded the Profile 52/55 Dual system to TC 7.1.4 and it no longer shows video on both screens during a conference. It displays content on the second screen fine. It worked in version 6 so I wonder if something changed in the software or the endpoint requires some additional configuration.
I've checked settings under Configuration > System Configuration > Video > Monitors and it's set to Dual. I've changed it few times and set it back to Dual but this didn't resolve the issue. I can't see any dual screen option key added under system information but I assume it has a dual screen option hence it's a dual screen system.
Do I need to change any settings?

Hi Patrick
Thank you very much for your response.
The system doesn’t have a remote control as such, it’s an MX700 so it has the 10inch touch panel, I had some engineers onsite attempting to bring the self-view image up using the panel but the only image that they managed to retrieve was a self-view PIP on the main image.
If I change the self-view settings in the configuration nothing appears to happen on the codec, the second monitor will only display the presentation, it’s as if the system is stuck in dual screen presentation only, even though when I set the system to dual screen, flick it back to single screen, set it to dual screen, back to the same situation no image unless there is a presentation being sent.
I have ensured that these settings are forced on the system
xconfig Video Monitors: Dual
xconfig Video CamCtrlPip CallSetup Mode: Off
xconfig Video SelfviewDefault Mode: Off
xconfig Video SelfviewDefault OnMonitorRole: Second
xconfig Video SelfviewDefault FullscreenMode: On
But no matter what I do I am unable to get the behaviour that I expect, this is why I have posted on this forum, I seem to think that the problem may be related to a software bug, however I am unable to downgrade as that would stop the control panel from working (this system doesn’t have a remote), and I see no mention of a second monitor issue reading the release notes, I have checked the online bugs and cannot find anything there either. so I am wondering if someone in Cisco has any idea as to what is happening here.
I thought about trying to use TC console to see if I could force a layout via this tool / or at least see what layouts are on the system, however the TC console version 6 will not connect to this system (I think this is more firewall related than system, as standard telnet and ssh attempts fail also).
Again I appreciate any and all assistance provided greatly, I am completely baffled as to what is happening here.
Cheers

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

I cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

i cant able to copy my files from my macbook to external hard disk,its showing "read-only",but i can able to transfer files in windows os,why cant i able to do tht in here?

to frederic1943
Its in NTFS Format...and i hav downloaded the file NTFS-3G,but still i dont know wht to do with that.will u pls help me here.

Iphone receiving read messages from mac mail

My iphone used to only receive unread emails as long as entourage on my mac wasnt open. Now i have moved to mac mail and my phone is receiving read messages from mac mail. Is there a setting im missing that will make my phone only receive new messages?
I still want my mac mail to receive these same emails later as it used to work.

You would still receive read e-mails in the inbox on your iPhone (and vice-versa) if you used IMAP but they would show as having been read and not as new. IMAP keeps all mail clients synchronised. The only alternative would be to use POP to download to your phone and IMAP to download to your laptop and create another folder on your computer and move mail over to it when read. By default, POP only downloads from the inbox so your phone would not download it again. IMAP would leave a copy in the folder you have created on the server in case you have problems with your laptop. If you delete read e-mails on your laptop, you can set it to remove them from the server after a fixed time and they would remain there until then but your phone would not download them again.

PC FORMATTED iPod read by MAC & PC? MAC formatted iPod read only by MAC?

Is this how the formatting issue works? I'm looking to buy an iPod for a friend who (I think) has PC.....
Since I'm a mac person, I want to buy the gift, load some music on, and ship it off to the lucky recipient....but if they have a PC , will it be recongnized once it's plugged in?
Any info would be helpful.
Thanks.

PC FORMATTED iPod read by MAC & PC? MAC formatted iPod read only by MAC? Is this how the formatting issue works?
Yes, that is how it works.
Since I'm a mac person, I want to buy the gift, load some music on, and ship it off to the lucky recipient....but if they have a PC , will it be recongnized once it's plugged in?
Okay, unless you restore your iPod while you're on the Mac, I believe it will still be formatted for a PC.
(You will not need to restore the iPod for transferring music to it on a Mac unless you want to upgrade the iPod's firmware on a Mac computer, then it will have to be Mac-formatted).
You see, when you recieve an iPod, it is shipped to you as a Windows-formatted iPod, probably since the majority of the population has PCs, and also, PC-formatted iPods are compatible for music transfer for a Mac also.
Does that make sense?
EDIT: Zevoneer has already answered your question, so you can ignore all of my post if you wish.
-Kylene

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regatta from Hamburg Germany

Dear all, After Software Upgrade too iOS 6 , Face Time and iMessage is Not working anymore. E Mail is working. Any Ideal what to do. Kind Regards from Hamburg Germany

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
 Cheers, Tom

Lost all contacts after software upgrade can anyone help

lost all contacts after software upgrade of my phone and cant get them from outlook to address book on my mac to get them back

Suggest that you cross-post over in one of the iWeb forums.
!http://i50.tinypic.com/izvwo1.gif!

C60 BOOT UP IN MAIN MODE AFTER SOFTWARE UPGRADE

Any one aware of why the C60 would go into maintenance mode after software upgrade from TC5.0.1 to TC7.2.1???
Software loaded and appears to install properly ???
Thanks.

Hi Chet,
You can try a factory reset in addition to the suggestions in the following post for similar issue
https://supportforums.cisco.com/discussion/12394476/c60-possibly-faulty
HTH
Manish

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recordings

After I upgraded to OSX Mountain Lion, QuickTime no longer auto names and auto saves, my recorded files.

HI,
In Message Menu > Preference > Accounts you should at least have the iMessage Account (Which is Enabled) and th Bonjour one that most likely is not.
After that if you had iChat type AIM valid Screen Names or Jabber IDs in an earlier OS then the System Preferences > Mail, Contacts and Calendars should list them and have them set to be used with Messages.
There is a vague chance that you have not set these up yet (you can do it in Messages or Mail, Contacts and Calendars)
Once you have a t least one other "Account" other than th iMessage one in Messages then the Buddy List option will appear next to CMD and 1 in the Window menu list.
NEXT
If you go to the General Section of the Messages Preferences you can unlink several Buddy lists if you have them (By default they are shown as one gathered Buddy list)
I Have several Accounts logged in (AIM valid and Jabber ones)
Uploaded with Skitch!
And I separate them in to individual lists which then gives me this in the Window Menu
Uploaded with Skitch!
8:06 PM Thursday; August 2, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Problems with rv042g after software upgrade

after software upgrade it reboot the router about every 45 sec
I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
Mogens from Demmark

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Why mouse arrow disappears after I upgraded to osx Mavericks

why mouse arrow disappears after I upgraded to osx Mavericks-==

After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

Mainstage always crashes before even start after I upgraded to OSX Mountain Lion. Doesn't matter if I use 32bit or 64bit mode. What to do? I bought Logic Studio 9 as a hard box at a retail store (including Logic Pro 9, Mainstage, Soundtrack Pro, Compresso

Mainstage always crashes after I upgraded to OSX Mountain Lion. Doesn't matter if I choose 32bit or 64bit mode. I sent all the error reports to Apple but no help from there. I heard rumours that Mountain Lion creates the problem. With Lion I had no problem. Logic Pro runs without issues. So what can I do now? Do I have to reinstall Logic Studio and then download all the updates again? Hopefully not.. Any advice? Thanks to all! Ben

Try delete the mainstage preferences
from USER/library/preferences com.apple.mainstage.plist
even if you are running mainstage 2.1.3 and not 2.2.2 it should work with mountain lion

HP scanner showing read only from Mac after software upgrade to OSX 10.9.1

Similar Messages

Maybe you are looking for