Hp simple pass opens an extra tap when opening a website why is that?

dear all
i purchased an hp pavilion dv6 with a finger scanner and set it up to open diffrent website yet whenever it does open it opens with an extra tap. why does it do that? thank you for your help and support.

dear all
i purchased an hp pavilion dv6 with a finger scanner and set it up to open diffrent website yet whenever it does open it opens with an extra tap. why does it do that? thank you for your help and support.

Similar Messages

  • Forms Opening is Very slow when opened from Client PC's.

    All,
    We are running forms application in 10.1.2.0 application server. We have a peculiar issue of slowness while opening forms from client PC's and not while opening from application server itself.
    1) When opening the form from a Windows 7 PC it takes around 25 seconds
    2) When opening the form from a Windows XP PC it takes around 15 seconds
    3) When opening the form from the application server itself it took less than 3 seconds .
    In essence all forms when opened from application server are opening very fast and when opened from client PC's it takes undue time. What might be the reason for the same, can anyone help us and we are pondering over this issue for some time. What are the files of interest to be visited for these kind of issues. We enabled tracing level 5 in JRE and could not find any thing fishy over it.
    Request application server and forms experts to participate and help us to resolve.
    Thanks in advance.

    Even if it's a generic issue you need to break it down in smaller parts to actually get a clue what's causing your problem. By now there is nothing we can rule out as the only thing we know is that it's slow on the client PC's.
    Building a small dummy form as suggested by Andreas is a good starting point. If the performance is also bad for a small form with one block you can rule out that it has anything to do with forms and it's caused by e.g. your network. If the small form performs well rebuild one of your forms step by step and do tests for each step. By that you should find what's causing troubles.
    What you can also take a look at are network roundtrips: You have to set the console window of your forms, and enable networkstats in your formsweb.cfg
    networkStats=yesA typical cause for (unnecessary) roundtrips are e.g. calls to the synchronize built in or timers. If you are using Javabeans you should also take a look at them. If you are looking at your network traffic wireshark is your friend ;).
    cheers

  • Attachment opens as plain text when opened from outside outlook but original format is html...

    Hello all,
    I have a strange issue with some mails where the attachments which are normally in html format are opening as plain text with an empty body (when opened outside outlook). As soon as i move them to outlook then they open correctly. I already tried many things
    like checking if it could be the antivirus that messed up the html or the security settings in outlook none of these worked.
    Did someone of you already experienced that ?
    Thanks for your support.

    Hello Melianos,
    What application do you use for opening emails with attachments? What code do you use? Could you please be more specific?

  • Safari not opening in landscape mode when opening links from mail

    Hello,
    Since the update to iOS8 I experience following: when using my iphone in landscape mode, opening links from the default mail app doesn't open Safari in landscape mode. I have to manually tilt the phone to portrait mode and back to get landscape mode.
    When opening Safari manually in landscape mode, it works fine.
    Anybody else experiencing this issue?

    Hey there streatuac,
    It sounds like the Safari app is not automatically switching to landscape when you open a link from the mail app on your phone. I would start by closing all the running apps on your phone first:
    iOS: Force an app to close
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app up to close it.
    When you have done that restart the device and test the issue again:
    iOS: Turning off and on (restarting) and resetting
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Audition is adding extra time when I record. Why?

    At my radio station we record the broadcast and then post it online the next day. Everything was fine and great until a few weeks ago I noticed that when I went to edit it the ext day there was an extra 20 sec for the one hour show. instead of being 1 hour, it was an hour and 20 sec. So I then had to go throught the file and edit out 20 sec worth of umms and uhhhs from the host and guests. It doesn't always happend but it is a big time waster. We have a two hour show and we record each hour separatly. For hour two it usually doesn't add the extra 20 sec but it did a couple of times. The only thing I have been able to figure out with some consistancy is if I open Audition 30 min before the show and record 20 min of nothing and then stop the recording, delete it and then start recording again, it will not add the extra 20 sec.
    Has this happened to anyone else or does anyone know what is going on and how I can make it stop? Is there an effect that I mistakenly turned on?
    Any help or advise will be greatly appreciated.
    Thanks!

    If you're posting it online, then it's probably mp3?
    Check this thread:
    http://forums.adobe.com/thread/726690?tstart=0

  • Pages '08 says "You need a newer version of Pages to open this document." when opening a Pages '08 Document

    Created a document 3 years ago with Pages '08.  Got a new Mac last summer, migrated my user account, reinstalled Pages '08.  Upgraded to Mavericks recently.
    Now when trying to open the document I get the message "You need a newer version of Pages to open this document." 
    Note that I have read a number of the messages here that are similar.  To be clear there is only one Pages (Pages '08) on this system.  Its in the iWork folder.
    Is it the case that this document and all the other Pages '08 documents on my system are lost forever? 
    BTW I have looked at the new version of Pages.  Its just plain awful from UX to quality.  What has gone wrong at Apple and specifically in the iWork group in the past few years???
    Thanks for any help!
    K
    And in trying to post this I got the "You are not allowed to create or update this content"  Changed the Community from what was automatically selected and seems to work now.  Whats with Apple Engineering and QA these days??? 

    I've never had Pages 5 on my system.  Just to confirm I copied the file to a USBDrive and gave it to a friend to try out.  He has Pages 5 on a new MBP with latest Mavericks.  When he tried to open it he got the following message:
    "You document will open in the new Pages for Mac.  If you save it or edit it, you'll need the latest Pages on iOS7 to open it on an iOS device."
    But it did open on his system.  He closed it, no save, and reopened but did not get the above message again.
    We concluded that the file is actually a Pages '08 file because of the above message.
    However we also suspect that when this file was simply opened in Pages 5.2.2 on his system it got flagged and possibly converted which is actually quite offensive!
    Thoughts/Advice?

  • Not open new tab (empty) when clicking on a .pdf link that can't be read in FF (no plug-in for pdf)

    When I click on a pdf file that should be able to be open in Firefox (with plug-in), FF open a new empty tab and ask to open or save the file.
    I would like that in case of FF not being able to open the pdf file, it skips the "open empty tab" part and directly go to "open/save" part.
    Is there a way, server side, to tell FF to do so or is there only only client side solution ?
    NB : In case that pdf can be open in FF, or any other browser, it should still be open in the browser and not be asking to "open/save", the point is only the empty tab.

    Is it possible you were using the Tab Mix Plus extension on your Windows system? Tab Mix Plus has a feature to force bookmarks into a new tab automatically when you left-click instead of the default behavior of opening in the same tab.

  • Acrobat X: Can you make 'open' the default option when opening sharepoint documents?

    When you open a sharepoint document with acrobat X, you get the pop-up screen asking you how you want to access the file. The option are 'check out and open', or just 'open'.
    Is it possible to make 'open' the default access methode, so that you don't have to click on the pop-up for every document?

    Hi Deedee,
    No, it's not really possible to set this default. 
    That said, there's a registry key setting you can change to disable the SharePoint integration feature though. 
    They key is:
    HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cSharePoint
    Summary: Disables the SharePoint integration features.
    Details:  Controlls the application's ability to detect that a file came from a Sharepoint server, disables the check-out prompt, and removes the SharePoint specific menu items. Possible values include:
    0: Disable the SharePoint integration features.
    1: Same as "null." Don't disable the SharePoint integration features.
    This may not really fit your need though.
    -David

  • Connected to 2 monitors, but Preview opens partly off-screen when opened

    I thought I would take another run at this. There are two other posts like this but neither has an answer. One is dated Mar 23, 2010 and the other is dated Apr 8, 2010. As with the other questions, I have two monitors and the preview application displays PDF's half on display 1 and half on display 2. PNG's are displayed entirely on display 2. Display 1 used DVI and display 2 uses VGA. The Preview application in 10.4 didn't have this problem. So here is the real question... How do you set the default position property for the preview application?
    TIA

    I am having the same issue. Were you able to find a way so you can set a default monitor? I'm using a TV as a third monitor and it always goes straight to that screen. However, it only happens when I first open a PDF in Preview. After that, it always opens every other one on my main screen. It's a real drag when I have to turn on the TV just to see a PDF.
    Do anyone have a solution? The only solution I have found so far is to move the TV monitor in the "Arrangement" setting over to the side (it's normally on top of the other two in the middle), which makes it really inconvenient for when I do use that monitor.

  • Open project by default when open CJ20N

    Hi,
    When I enter the transaction CJ20N and open a project. Save this project in memory. So when I come back to enter the transaction CJ20N open this project by default, I have managed to enter the project in view mode, I have reviewed the options you have in the CJ20N, but can not get to enter the transaction did not open none. I really want is that when I open the CJ20N by default not open any project.
    Anyone know the solution?
    Many thanks.
    Regards.

    Hi Mahendra,
    Thank you very much for answering.
    I have not check this check box, and I checked this before asking for help. SAP In other machines I unchecking this check box and it worked, but SAP's machine where I am it, though have not checked the check box is making my last project I opened.
    Thank you.
    Best regards.
    Chuso.

  • After updating firefox it crashed . Its froze when opened and crashes asap when opened .

    When i open it a blue screen comes up and it then shows as firefox as frozen and not responding . It wont stay open only a few seconds before crashing again with the mozilla crash reporter showing . I can only quit firefox .

    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    * https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
    See:
    * http://kb.mozillazine.org/Firefox_crashes
    * https://support.mozilla.com/kb/Firefox+crashes

  • Windows taskbar opens a separate "tab" when opening the broweser from pinned program

    I recently installed firefox because it does not lack when it comes to displaying kanjis.
    But there is a weird thing happening. I pinned my firefox to my windows taskbar. When i open firefox from this pinned shortcut, it opens a separate "tab" on my taskbar. No other program has ever done this.
    Do you have any clue what is going on?
    I have added a picture to show what I am talking about
    Thanks for any help you can provide.

    ''FredMcD [[#answer-676605|said]]''
    <blockquote>
    Firefox should display an icon for each window that it has open.
    Click one icon, what is it? Now click the other.
    </blockquote>
    Clicking the pinned one on my taskbar (the one to the left in the picture) only opens more firefox browsers and stocks them in the same "tab" as the others on my taskbar (the one to the right in the picture)

  • No files opened in Acrobat X when opened via JavaScript (as ActiveXObject)

    Hi together
    In a web application (ASP.Net) we developed, the customers may open, edit and save pdf files. The files are stored on a network drive which is connected over a vpn tunnel. To edit the selected files, Acrobat is opened by a JavaScript from within our application. Then the needed documents are opened in Acrobat. This web application is in use by various clients since about 6 years and worked without problems with Acrobat 5 - Acrobat 9 (all Pro versions). However, in Acrobat X Pro no documents are opened (Acrobat itself is opened but just as an empty window).
    The JavaScript to open Acrobat and the files looks somehow like that:
    objAcro = new ActiveXObject("AcroExch.App");
    objAcro.Show();
    objDoc = new ActiveXObject("AcroExch.AVDoc");
    objDoc.Open("X:\Temp\File.pdf");
    Thank you very much for your help.
    Kind regards
    Thomas

    Hi Sabian
    Thanks for your hints. You pointed me to the right direction. I managed to open and edit the pdf files now, but it's not really very handy for everyday use. With the following settings, the documents are opened:
    - Enhanced security is switched on (files are not opened if switched off)
    - Protected view may not be set to off
    - I entered the url and the \\server\share where the documents are stored to the trusted sites
    So far, so good. But for every single file which is opened in Acrobat, I have to click the "activate all functions" button to be able to edit the files. This is not realistic in production because users edit more than 100 documets a day...
    Do you know if there is a possibility to confirm "activate all functions" once for all documents opened from trusted sites?
    Thank you for your efforts.
    Thomas

  • Iphone 4G music plays through bluetooth, but only one speaker works in my car when i play it, why is that?

    This problem suddenly started about a week ago. i had both speakers working, then after i updated my phone one skeaker stopped working on the driverside like with a pair of headphones when the left headphone stops working. only thing is i don't have to physically plug in my phone to listen to music, i use bluetooth, my car came with the option. i was wondering if its because the balance got changed in my phone some how or if its something else. please help! 

    for troubleshooting I would try another bluetooth device to make 100% sure that it was an iphone issue

  • My theme is always lost when i restart firefox. why is that?

    when i put theme on firefox its all ok wile im browsing, but when i close mozzila it changes back to default!

    The data of all installed Personas and its background (attention) color and text color are stored in the lightweightThemes.usedThemes pref in JSON object format ({"id":"#","name":"xxx",...}).
    The first entry of that pref is the currently selected Persona.
    You may want to keep a backup copy of the current value of the lightweightThemes.usedTheme pref and bookmark the pages of installed Personas on the Add-ons site.
    The images of the currently selected Persona are stored in the lightweighttheme-header and lightweighttheme-footer files in the Firefox profile folder, so make sure to keep these files as well.
    Firefox copies the image files to the lwtheme folder in the Firefox profile folder and sets some prefs to true.
    lightweightThemes.isThemeSelected = true
    lightweightThemes.persisted.footerURL = true
    lightweightThemes.persisted.headerURL = true

Maybe you are looking for