HP Simple Save Problem

I recently purchased the 1TB HP Simple save external hard drive to back up files on my HP PC. It worked just fine out of the box, but I am not able to reboot my computer with the drive plugged in. If I try to boot up, it just goes to a black screen with a blinking cursor.
I thought the great thing about this unit was that you just leave it plugged in all the time. Am I going to have to unplug the unit every time I want to reboot? Is this normal, or is there some setting I need to change?
Thanks.

My issue was that, after the first use and backup, the HPSS 1.0 TB drive would not start automatically.
Even after going into the drive and clicking on "HP SimpleSave.exe".
Bottom line: Support sent me to:
http://hpsupport.wdc.com/hpsupport/product/download.asp?pid=1&lang=en
Follow the instructions but when you restart...click on the HP Launcher but DO NOT allow any software updates.
I allowed it to download a software update the first time and it has bugs which defeated the whole purpose. So I started again and cancelled all update attempts and my HPSS is now backing up properly.
Hope this helps.

Similar Messages

Simple Save HP MD1000H on Mac

Simple Save support helped me get this loaded on my MAC. How do I activate the download?

Hi,
No by definition, you can connect it to a router which supports sharing USB external HDD. There are many around such as a Netgear D6300 (which I'm using now) but definitely not NAS. In short you can share it on your homw network but not as a NAS by definition.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Simple Save 2 TB External Hard Drive (3.5-inch, USB 2.0) Broken HELP!

OK so I've searched around for a solution to my problem but have found no answer so I'm trying here.
I've had my HP Simple Save 2 TB External Hard Drive for a few of years now, it's served me great, I used it for storing all my photos but the usb connector has snapped off from the small CD drive inside the casing.
This has simply been through use, it was working fine, not wobbly or mistreated in any way, it must have just came to the end of it's life and now I can't hook it up to my computer to get the photos, I'm desperate to get them back, wedding photos, birthdays etc most of you must know how I'm feeling.
So I looked up a few solutions, one was to buy a USB-to-IDE/SATA adapter and use that to connect to the computer, well it works as far as recognising that a device is connected but won't load the files or folders to view.
As I've looked around apparently the small CD drive that's inside the case has software that my computer automatically loads? Now this is where I'm lost, how do I manage to get this to work?
I'm almost at my wits end, as far as looking every single day on Amazon and eBay to buy a new one to transfer the CD drive onto the broken one to load it up and get my photos back, IF that would even work, I'm not sure.
So if you have any suggestions/help please please get in touch, thanks.

In case anyone it´s interested I restore the autorun.inf into the drive and the problem was that I put all the toshiba software into one folder to be more organized. As soon as I place it back again outside the folder (in the root of the hard drive). It grab the canvio image.
Attachments:
canvio.jpg ‏11 KB

HP simple save hard drive

I dropped my HP simple drive on the floor after saving files in it. Tried opening it on my laptop if it's ok but it won't let me run it. I wanna know if I will still be able to retrieve all the save files from it esp. the pictures of my daughter since birth. Can someone help me solve the problem, please?

You can search the web for "how to open a simple save drive". It quite simple process, U-Tube videos have been made of the process. Then you'll need an adapter to test the hard drive.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

HP Simple Save external drive

Hi, we have an HP Simple Save external drive. At the begining it worked fine then we had problems to open it as it took quite a while for it to appear on the finder, but eventually it show and we were able to keep using it for back up. However now we are trying to access our info and we just can find it on the finder, besides the annoying launcher icon. Can someone please help me access my info through any other way? should I try this on a Microsoft desktop?

Are you using HP's software to back up? If so, see what instructions/help/support/forms they have. You're not likely to find folks here that know much, if anything, about HP's software.
If you're using Time Machine to back up, try repairing the backups, per #A5 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).

HP Simple Save external hard drive not recognized on laptop.

I have tried plugging it into different USB ports on same laptop or a completely different desktop. It is never recognized. last week it was. I took it apart & tried it in a 3.5 SATA external closure. Still is not recognized. I have info on it that i desperately need. Is there any way for me to get my files off of it?

cadee
Welcome to the HP Community Forum.
I hate to be the bearer of bad news; this vintage drive might have died.
If you are lucky, it is only the power supply, although this is a thin hope and is not based at all on the facts.
Depending on your level of desperation, you might consider taking the drive to a forensic specialist.
My own Simple Save drive died suddenly one day about five months ago after several years of good service. Fortunately, I never depend on only one device for backups, else they are not backups, but instead become single points of certain failure.
I hope you find a viable solution.
We have other posts here on the forum on the subject; you might do a search and see what others have said.
I grieve for your loss.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I have a huge iphoto library and an HP simple save hard drive which has been mac formated.

the discssion board states to close iphoto, go to folders, locate, click and drag library to new location (ie-my HP simple save which has been formated to mac) When I look in my libraries, I have several for libraries, including some that say 6.
When I open one, not all my photos are contained, only a part of my entire iphoto library
which one do I use--and how can to confirm that ALL my photos are on my external hard drive?
thank you for your help---
[email protected]

Open a Finder Window and go to your Username then to the Pictures folder. In there you will find a file, actually a folder but I won't get into that, called "iPhoto Library.photolibrary". It is that files (Folder listed as a Package) you need to Copy to your external drive.

Weird save problem Word 2004 using OS X 10.4.x

We have major problems saving Word documents using Mac OS X 10.4.x on a server volume. What really makes it odd is that the problem only occurs in the afternoon. The problem has only been reported by users trying to save using Microsoft Word 2004.
When the problems occurs it is not possible to save or save as on the server volume - Can not find volume. The volume is available on the desktop. Saving the file on the desktop works fine.
Mac OS X 10.4.2/10.4.3/10.4.4 with all updates installed.
Microsoft Office 2004 Swedish with SP2 installed.
It is a Windows Server 2003 with MacShare IP 9 installed. We've had the problem for some time and have replaced the server during that time, the save problem still remains though. It makes no difference with or without MacShare IP installed.
Anyone have any ideas how to solve this one?

Welcome to Apple Discussions!
When dealing with Windows environments, I find it best to save the files as archives before sending them over to Windows environments. The file naming conventions differing by operating system, and the formats of what get sent sometimes can get corrupted when moving from system to system. This I found especially true when saving to a PC formatted flash drive. To make a file an archive, save it on the Mac first, and the control mouse click the document in 10.3 or 10.4. The contextual menu brings up a create archive. It has been my understanding than 10.4's archive format is more compatible with Winzip and 10.3 more compatible with GnuZip, both of which you can find clients for under Windows. Both 10.3 and 10.4 have the ability to open these documents directly when saved as this format.

Real simple xslt problem/question

Hi, i have a real simple xslt problem but i just cant figure out how to do it by looking at various examples on the net. i have a xml document and in it are some elements with a "result" tag name. i want to use xslt to reproduce exactly the same xml document except with an attribute called "id" added to those elements with a "result" tag name. i'm sure that theres a simple solution to it but i just cant figure it out. any helps greatly appreciated, thanks

Start with the XSLT identity transform (I don't have it handy and it's fairly long, but you should be able to google it up). Add this:<xsl:template match="result">
<result id="">
<xsl:apply-templates>
</result>
</xsl:template>

JDeveloper IDE simple setting problem

Hi,
Recently we switched to JDeveloper from Visual Cafe .I have a simple setting problem.How can I set the options so that IDE gives, the core java classes and packages,and our application classes and packeges, prompts in imports as well as in code.Where to set the options.
eg: when I write
import java. it should prompt all the pakages.
Thanks in advance.
-Gopal
null

I am not sure I understand what you are requesting, but ...
You can configure JDeveloper projects to include various libraries by default.
This is done by selecting menu Tools | Default Project Properties.../ Libraries tab.
You should define a library for your classes.
You can import any of the packages / classes from all the libraries which your project includes.
It would be incorrect for a tool to automatically add a bunch of import lines at the top of every file because each file should import what it needs and just as importantly, not import what it does not need depending on the component type (e.g. a servlet should not include javax.swing.* ).
An easy way to import elements into JDeveloper is to type in something like:
import java.
// and then type in Ctrl Space
and this launches the package browser, you can select packages or classes to import.
You can also do this at the variable declaratiton point such as typing in:
foo() {
Frame x
// Press Control Alt Space
and this will correctly change the type (Frame) to the type you select in the package browser and add the import statement.
-John
null

PDF 'File Save' problem in Firefox

Using Firefox browser, when I select a PDF file that opens in a new window [rather than a new tab], save it and close the window, the AcroRD32.exe process is not stopped. If I then open another PDF file in a similar manner, it can not be saved. Each time you close a PDF window, you have to go to Task Manager and stop the AcroRD32 process before being abl;e to save a subsequent document. This does not happen with IE.
Using Reader 10.1.1 and Firefox 8 on a Windows Vista32 system.

Same bug i see in Opera browser. PDFs doesn't saves without stopping AcroRd32 process. And save dialogue doesn't appears when clicking links (even if web browsing function deactivated in adobe reader settings)...
Apart from this File Save problem, there is more strange things while browsing PDF online, like "blinks", hangs, image dissapear, suddenly lags without any reason, browser crashing and more...
So, because adobe reader prevents to download PDFs, and because it works very buggy with online browsing, especially if website uses adobe flash to show PDFs, the only right solution i found is uninstalling adobe reader. After that File Save problem was gone!

Restore only latest versions of files in a simple save backup drive

When I go to restore (transfer) files to a new computer from my HP simple save drive, how do I select only the latest backup versions of ALL files (photos, docs, music, etc...)?
Thank you

If you have applied raster layer effects in illustrator, then it won't work because you no longer have a vector image.
What is the zoom factor of your composition window? What is the resolution of your comp window? If you would post a screenshot of your composition with the properties of the layers in question revealed by pressing the u key twice maybe we would have a clue what you are doing wrong. It's quite difficult to come up with an answer with out some details. We need more details.

Simple OOP Problem. Help!

This is just a simple OOP problem that i cant decide on a best
implementation for.
im passing an object to an instance of, 'TabbedFrame', which is just
a frame with a Tabbed Pane in it that is holding custom panels.
however, these custom panels need access to the object being
passed to 'TabbedFrame' and to some methods in it.
i cant make them static however so how do i gain access to them?
is my only option to pass the 'TabbedFrame' to each panel?
like - jtabbedpane.add( "Panel 1", new mypanel1(this));
here is code:
new TabbedFrame( DataObject );
public class TabbedFrame{
public TabbedFrame(DataObject do){
this.do = do;
jtabbedpane.add( "Panel 1", new mypanel1() );
DataObject do;
public class mypanel1{
public mypanel1(){
// need access to DataObject of the 'TabbedFrame' object that instantiated
// this 'mypanel1' and to some of its methods
}i would just pass the DataObject to evey panel (there are 12) but
i also need to be able to call methods in the 'TabbedFrame'.
Any help would be appreciated!

Modify mypanel1's constructor:
public class mypanel1{
TabbedFrame tf;
public mypanel1(TabbedFrame tf){
this.tf = tf;
// need access to DataObject of the 'TabbedFrame' object that instantiated
// this 'mypanel1' and to some of its methods
DataObject theDo = tf.getDataObject();
tf.someMethod(); // Call method on the TabbedFrame
}In TabbedFrame:
public TabbedFrame(DataObject do){
this.do = do;
// Modify call to constructor to pass "this" TabbedFrame.
jtabbedpane.add( "Panel 1", new mypanel1(this) );
}

Share and save problem after latest update

hello,
i have share and save problem after latest update - i have installed ps touch on nexus 5 about 2 months ago and until yesterday everything was good but after latest update i can't save and share images in ps touch ( i do reinstall this app but problem is still and app doesn't work properly ) how can i downgrade to the old version ? Could you fix this problem quickly ?

i use app which called "aLogcat"
--------- beginning of /dev/log/main
I/dalvikvm(24476): Enabling JNI app bug workarounds for target SDK version 11...
D/dalvikvm(24476): GC_CONCURRENT freed 174K, 2% free 17054K/17264K, paused 2ms+2ms, total 15ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
--------- beginning of /dev/log/system
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_MOVE, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=2, eventTime=27743080, downTime=27743066, deviceId=4, source=0x1002 }
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=38.0, y[0]=-115.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=27743086, downTime=27743066, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_FOR_ALLOC freed 122K, 1% free 17271K/17428K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 10K, 1% free 17434K/17604K, paused 7ms, total 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 65K, 2% free 17690K/17928K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 17.615MB for 328336-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18010K/18252K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18011K/18252K, paused 9ms, total 9ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.073MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 18479K/18724K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 18481K/18724K, paused 2ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 6ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 18.532MB for 479536-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18949K/19196K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 19418K/19668K, paused 1ms+1ms, total 10ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19592K/19844K, paused 8ms, total 8ms
I/dalvikvm-heap(24476): Grow heap (frag case) to 20.049MB for 933136-byte allocation
D/dalvikvm(24476): GC_FOR_ALLOC freed 0K, 2% free 20503K/20756K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 2% free 21416K/21668K, paused 1ms+1ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 50K, 2% free 22351K/22580K, paused 7ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 5K, 1% free 23900K/24140K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 1% free 25824K/26084K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3411K, 14% free 24528K/28204K, paused 12ms, total 13ms
D/dalvikvm(24476): GC_CONCURRENT freed 2814K, 14% free 24256K/28204K, paused 2ms+1ms, total 11ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9266K, 1% free 17270K/17424K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 15K, 1% free 17575K/17748K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 22K, 2% free 17875K/18072K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 2% free 18195K/18396K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18517K/18720K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 18838K/19044K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19159K/19368K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19480K/19692K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 19974K/20192K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 20616K/20840K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 21431K/21664K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 2% free 22714K/22960K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 2% free 24004K/24432K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8478K, 33% free 17593K/26228K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 32% free 17895K/26228K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 18K, 31% free 18198K/26228K, paused 11ms, total 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18519K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 29% free 18840K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19482K/26228K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 23% free 20297K/26228K, paused 2ms+1ms, total 15ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 11ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 19% free 21260K/26228K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22543K/26228K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 182K, 9% free 23979K/26228K, paused 21ms, total 22ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 8485K, 33% free 17598K/26132K, paused 13ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 25K, 32% free 17894K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 12K, 31% free 18204K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 1K, 30% free 18524K/26132K, paused 12ms, total 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 28% free 18845K/26132K, paused 8ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 26% free 19487K/26132K, paused 1ms+0ms, total 9ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 7ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 20129K/26132K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 20% free 21091K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22375K/26132K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 9K, 9% free 24011K/26132K, paused 14ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 2147K, 10% free 23855K/26456K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed 8776K, 35% free 17337K/26304K, paused 3ms+2ms, total 20ms
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/InputEventReceiver(24476): Attempted to finish an input event but the input event receiver has already been disposed.
W/ViewRootImpl(24476): Dropping event due to root view being removed: MotionEvent { action=ACTION_UP, id[0]=0, x[0]=564.0, y[0]=-50.0, toolType[0]=TOOL_TYPE_FINGER, buttonState=0, metaState=0, flags=0x0, edgeFlags=0x0, pointerCount=1, historySize=0, eventTime=28190972, downTime=28190972, deviceId=4, source=0x1002 }
D/dalvikvm(24476): GC_CONCURRENT freed 186K, 31% free 17626K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 4ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 63K, 30% free 17884K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 3K, 29% free 18201K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 27% free 18696K/25476K, paused 2ms+1ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 25% free 19190K/25476K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 23% free 19831K/25476K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 19% free 20794K/25476K, paused 2ms+0ms, total 12ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 8ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 14% free 22078K/25476K, paused 1ms+2ms, total 14ms
D/dalvikvm(24476): WAIT_FOR_CONCURRENT_GC blocked 12ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 7% free 23855K/25476K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_CONCURRENT freed <1K, 6% free 24176K/25476K, paused 2ms+1ms, total 14ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 6440K, 26% free 19562K/26216K, paused 9ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 93K, 23% free 20207K/26216K, paused 10ms, total 10ms
D/dalvikvm(24476): GC_FOR_ALLOC freed 11K, 21% free 20935K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 18% free 21673K/26216K, paused 9ms, total 9ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 15% free 22499K/26216K, paused 8ms, total 8ms
D/dalvikvm(24476): GC_FOR_ALLOC freed <1K, 10% free 23695K/26216K, paused 9ms, total 9ms

Dreamweaver 2014.1 Build 6947 (Mac) - save problem

I updated to latest version yesterday and now have a problem when I save files which shouldn't happen on a 2012iMac saving to a thunderbolt drive - and didn't happen before updating.
When I save a file i get to watch the (very pretty but boring) spinning top for a longtime. If the 'Force Quit' window is open it shows Dreamweaver 'not responding'. Mostly but not always Dreamweaver decides to respond again.
Same site, same settings, same HDD as before the update.
IMac: 3.4GHz i7 32GB RAM
OS X: 10.9.5
What have you broke?

Hi Nancy,
It seems it's a bug, so I will go back to the previous vetsion. Thanks for
the link!
Best
Pedro
Em segunda-feira, 22 de dezembro de 2014, Nancy O. <[email protected]>
escreveu:
Dreamweaver 2014.1 Build 6947 (Mac) - save problem created by Nancy
O. <https://forums.adobe.com/people/Nancy+O.> in *Dreamweaver support
forum* - View the full discussion
<https://forums.adobe.com/message/7037522#7037522>

HP Simple Save Problem

Similar Messages

Maybe you are looking for