HP Slate 5000 and SP1

Could not load SP1 on my HP Slate 500 with Windows 8. I talked to support and they recommended a manual load instead of using Windows Update on the Microsoft site. The manual load worked. Reference support case[Personal Information Removed]?

I've taken the TP-Link device out of the loop now, and connected directly via USB. I'm still experiencing the same issue - can scan from within the software, but the buttons don't do anything.
It seems to be something to do with the 'HP Scan Dispatch 3' that in the registry is set to use:
C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\5000 (L2715A)\hpScanDispatch3.exe Scan# /StiDevice:%1 /StiEvent:%2;
I don't know what the parameters are supposed to be, but this program simply isn't launching. The other option available under 'Events' from 'Devices & Printers', does start the Scan Utility program, but this isn't the behaviour I'm after - it should perform the scan and save the pdf in the destination without any user intervention.
Any help gratefully received, hopefully whilst I still have some hair left...

Similar Messages

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

45 min long session of log file sync waits between 5000 and 20000 ms

45 min long log file sync waits between 5000 and 20000 ms
Encountering a rather unusual performance issue. Once every 4 hours I am seeing a 45 minute long log file sync wait event being reported using Spotlight on Oracle. For the first 30 minutes the event wait is for approx 5000 ms, followed by an increase to around 20000 ms for the next 15 min before rapidly dropping off and normal operation continues for the next 3 hours and 15 minutes before the cycle repeats itself. The issue appears to maintain it's schedule independently of restarting the database. Statspack reports do not show an increase in commits or executions or any new sql running during the time the issue is occuring. We have two production environments both running identicle applications with similar usage and we do not see the issue on the other system. I am leaning towards this being a hardware issue, but the 4 hour interval regardless of load on the database has me baffled. If it were a disk or controller cache issue one would expect to see the interval change with database load.
I cycle my redo logs and archive them just fine with log file switches every 15-20 minutes. Even during this unusally long and high session of log file sync waits I can see that the redo log files are still switching and are being archived.
The redo logs are on a RAID 10, we have 4 redo logs at 1 GB each.
I've run statspack reports on hourly intervals around this event:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And here is a sample while not encountering the issue:
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66
Yes I know I am already tight on I/O for my redo even during normal operations yet, my redo and archiving works just fine for 3 hours and 15 minutes (11 to 15 log file switches). These normal switches result in a log file sync wait of about 5000 ms for about 45 seconds while the 1GB redo log is being written and then archived.
I welcome any and all feedback.
Message was edited by:
acyoung1
Message was edited by:
acyoung1

Lee,
log_buffer = 1048576 we use a standard of 1 MB for our buffer cache, we've not altered the setting. It is my understanding that Oracle typically recommends that you not exceed 1MB for the log_buffer, stating that a larger buffer normally does not increase performance.
I would agree that tuning the log_buffer parameter may be a place to consider; however, this issue last for ~45 minutes once every 4 hours regardless of database load. So for 3 hours and 15 minutes during both peak usage and low usage the buffer cache, redo log and archival processes run just fine.
A bit more information from statspack reports:
Here is a sample while the issue is occuring.
Snap Id Snap Time Sessions
Begin Snap: 661 24-Mar-06 12:45:08 87
End Snap: 671 24-Mar-06 13:41:29 87
Elapsed: 56.35 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 615,141.44 2,780.83
Logical reads: 13,241.59 59.86
Block changes: 2,255.51 10.20
Physical reads: 144.56 0.65
Physical writes: 61.56 0.28
User calls: 1,318.50 5.96
Parses: 210.25 0.95
Hard parses: 8.31 0.04
Sorts: 16.97 0.08
Logons: 0.14 0.00
Executes: 574.32 2.60
Transactions: 221.21
% Blocks changed per Read: 17.03 Recursive Call %: 26.09
Rollback per transaction %: 0.03 Rows per Sort: 46.87
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 98.91 In-memory Sort %: 100.00
Library Hit %: 98.89 Soft Parse %: 96.05
Execute to Parse %: 63.39 Latch Hit %: 99.87
Parse CPU to Parse Elapsd %: 90.05 % Non-Parse CPU: 85.05
Shared Pool Statistics Begin End
Memory Usage %: 89.96 92.20
% SQL with executions>1: 76.39 67.76
% Memory for SQL w/exec>1: 72.53 63.71
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 756,729 2,538,034 88.47
db file sequential read 208,851 153,276 5.34
log file parallel write 636,648 129,981 4.53
enqueue 810 21,423 .75
log file sequential read 65,540 14,480 .50
And this is a sample during "normal" operation.
Snap Id Snap Time Sessions
Begin Snap: 671 24-Mar-06 13:41:29 88
End Snap: 681 24-Mar-06 14:42:57 88
Elapsed: 61.47 (mins)
Cache Sizes
~~~~~~~~~~~
db_block_buffers: 196608 log_buffer: 1048576
db_block_size: 8192 shared_pool_size: 67108864
Load Profile
~~~~~~~~~~~~ Per Second Per Transaction
Redo size: 716,776.44 2,787.81
Logical reads: 13,154.06 51.16
Block changes: 2,627.16 10.22
Physical reads: 129.47 0.50
Physical writes: 67.97 0.26
User calls: 1,493.74 5.81
Parses: 243.45 0.95
Hard parses: 9.23 0.04
Sorts: 18.27 0.07
Logons: 0.16 0.00
Executes: 664.05 2.58
Transactions: 257.11
% Blocks changed per Read: 19.97 Recursive Call %: 25.87
Rollback per transaction %: 0.02 Rows per Sort: 46.85
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.99 Redo NoWait %: 100.00
Buffer Hit %: 99.02 In-memory Sort %: 100.00
Library Hit %: 98.95 Soft Parse %: 96.21
Execute to Parse %: 63.34 Latch Hit %: 99.90
Parse CPU to Parse Elapsd %: 96.60 % Non-Parse CPU: 84.06
Shared Pool Statistics Begin End
Memory Usage %: 92.20 88.73
% SQL with executions>1: 67.76 75.40
% Memory for SQL w/exec>1: 63.71 68.28
Top 5 Wait Events
~~~~~~~~~~~~~~~~~ Wait % Total
Event Waits Time (cs) Wt Time
log file sync 953,037 195,513 53.43
log file parallel write 875,783 83,119 22.72
db file sequential read 221,815 63,944 17.48
log file sequential read 98,310 18,848 5.15
db file scattered read 67,584 2,427 .66

Opportunities are not supported with SAP Business One 2005A SP0 and SP1??

In SBO Note 973962 says that opportunities are not supported with 2005A sp0 and SP1.
When running 5.9.7 I can sync opportunities.
So does anyone know what is and what is not supported in this version for Opportunities?
Thanks,
Eric Rasenberg

Full functionality is not shared nor synchronized between systems for opportunities in 5.9.x

Ask the Expert: Cisco Nexus 2000, 5000, and 6000 Series Switches

with Cisco Expert Vinayak Sudame
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions how to configure and troubleshoot the Cisco Nexus 2000, 5000 and 6000 Series Switches with Cisco subject matter expert Vinayak Sudame. You can ask any question on configuration, troubleshooting, features, design and Fiber Channel over Ethernet (FCoE).
Vinayak Sudame is a Technical Lead in Data Center Switching Support Team within Cisco's Technical Services in RTP, North Carolina. His current responsibilities include but are not limited to Troubleshooting Technical support problems and Escalations in the areas of Nexus 5000, Nexus 2000, FCoE. Vinayak is also involved in developing technical content for Cisco Internal as well as external. eg, Nexus 5000 Troubleshooting Guide (CCO), Nexus 5000 portal (partners), etc. This involves cross team collaboration and working with multiple different teams within Cisco. Vinayak has also contributed to training account teams and partners in CAE (Customer Assurance Engineering) bootcamp dealing with Nexus 5000 technologies. In the past, Vinayak's responsibilities included supporting MDS platform (Fiber Channel Technologies) and work with EMC support on Escalated MDS cases. Vinayak was the Subject Matter Expert for Santap Technologies before moving to Nexus 5000 support. Vinayak holds a Masters in Electrical Engineering with Specialization in Networking from Wichita State University, Kansas. He also holds Cisco Certification CCIE (#20672) in Routing and Switching.
Remember to use the rating system to let Vinayak know if you have received an adequate response.
Vinayak might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community, Other Data Center Topics discussion forum shortly after the event.
This event last through Friday July 12, 2013. Visit the community often to view responses to youe questions of other community members.

Hi Vinayak,
Output of "show cfs internal ethernet-peer database"
Switch 1
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b7:c2:80 [Local]
20:00:54:7f:ee:b6:3f:80 16000005
Total number of entries = 2
Switch 2
ETH Fabric
Switch WWN logical-if_index
20:00:54:7f:ee:b6:3f:80 [Local]
20:00:54:7f:ee:b7:c2:80 16000005
Total number of entries = 2
Output of "show system internal csm info trace"
Switch 1 in which "show cfs peers" show proper output
Mon Jul 1 05:46:19.145339 (CSM_T) csm_sp_buf_cmd_tbl_expand_range(8604): No range command in buf_cmd_tbl.
Mon Jul 1 05:46:19.145280 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Mon Jul 1 05:46:19.145188 (CSM_T) csm_sp_handle_local_verify_commit(4291):
Mon Jul 1 05:46:19.145131 csm_continue_verify_ac[597]: peer is not reachable over CFS so continuing with local verify/commit
Mon Jul 1 05:46:19.145071 csm_tl_lock(766): Peer information not found for IP address: '172.16.1.54'
Mon Jul 1 05:46:19.145011 csm_tl_lock(737):
Mon Jul 1 05:46:19.144955 (CSM_EV) csm_sp_build_tl_lock_req_n_send(941): sending lock-request for CONF_SYNC_TL_SESSION_TYPE_VERIFY subtype 0 to Peer ip = (172.16.1.54)
Mon Jul 1 05:46:19.143819 (CSM_T) csm_copy_image_and_internal_versions(788): sw_img_ver: 5.2(1)N1(2a), int_rev: 1
Mon Jul 1 05:46:19.143761 (CSM_T) csm_sp_get_peer_sync_rev(329): found the peer with address=172.16.1.54 and sync_rev=78
Mon Jul 1 05:46:19.143699 (CSM_T) csm_sp_get_peer_sync_rev(315):
Mon Jul 1 05:46:19.143641 (CSM_EV) csm_sp_build_tl_lock_req_n_send(838): Entered fn
Mon Jul 1 05:46:19.143582 (CSM_T) csm_set_sync_status(6257): Peer RT status PSSed
Switch 2 in which "show cfs peers" does not show proper output
Mon Jul 1 06:13:11.885354 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 77 seq 482
Mon Jul 1 06:13:11.884992 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 357 seq 369
Mon Jul 1 06:13:11.884932 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 357 seq 368
Mon Jul 1 06:13:11.884872 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 357 seq 367
Mon Jul 1 06:13:11.884811 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 357 seq 366
Mon Jul 1 06:13:11.884750 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd channel-group 51 mode active, cmd pseq 352 seq 365
Mon Jul 1 06:13:11.884690 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport trunk allowed vlan 2, 11, cmd pseq 352 seq 364
Mon Jul 1 06:13:11.884630 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd switchport mode trunk, cmd pseq 352 seq 363
Mon Jul 1 06:13:11.884568 (CSM_ERR) csm_pss_cmd_tree_walk_cb(2057): Parent command not found for cmd description process_vpc, cmd pseq 352 seq 362
Mon Jul 1 06:13:11.884207 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733916569.txt
Mon Jul 1 06:13:11.878695 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:13:11.878638 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 06:12:29.527840 (CSM_T) csm_pss_del_seq_tbl(1989): Freeing seq tbl data
Mon Jul 1 06:12:29.513255 (CSM_T) csm_sp_acfg_gen_handler(3106): Done acfg file write
Mon Jul 1 06:12:29.513179 (CSM_EV) csm_sp_acfg_gen_handler(3011): Preparing config into /tmp/csm_sp_acfg_1733911262.txt
Mon Jul 1 06:12:29.508859 csm_get_locked_ssn_ctxt[539]: Lock not yet taken.
Mon Jul 1 06:12:29.508803 (CSM_EV) csm_sp_acfg_gen_handler(2937): Recieved sp acfg merge request for type: running cfg
Mon Jul 1 05:53:17.651236 Collecting peer info
Mon Jul 1 05:53:17.651181 Failed to get the argumentvalue for 'ip-address'
Mon Jul 1 05:40:59.262736 DB Unlocked Successfully
Mon Jul 1 05:40:59.262654 Unlocking DB, Lock Owner Details:Client:1 ID:1
Mon Jul 1 05:40:59.262570 (CSM_T) csm_sp_del_buf_cmd(1713): Deleting comand with Id = 1
Mon Jul 1 05:40:59.262513 DB Lock Successful by Client:1 ID:1
Mon Jul 1 05:40:59.262435 Recieved lock request by Client:1 ID:1
Mon Jul 1 05:40:41.741224 ssnmgr_ssn_handle_create_get: Session FSM already present, ID:1
Mon Jul 1 05:40:41.741167 ssnmgr_handle_mgmt_request: Create/Get request received for session[process_n5kprof]
show cfs lock gives no output.
Just to further clarify, we have 4 5548UP switches in the same management vlan. 2 switches are in one location lets say location A and they are CFS peers and are working fine.
These two switches which are having problem are in location B. All the switches are in the same vlan. Essentially the all CFS multicast messages will be seen by all 5548 switches as they are in the same vlan. I am assuming that this might not create any problems as we specify the peers in the respective configurations. Or do we have to change the CFSoIPv4 multicast addresses in location B or may be configure a different region.
Regards.

Will updating my iphone 5s from 7.1.2 to 8.2 lock it. my phone was initially locked.my friend brought it from usa.i gave a computer vendor rs 5000 and he said he will factory unlock the iphone.so it was unlocked in this way.its not softwared unlocked

will updating my iphone 5s from 7.1.2 to 8.2 lock it. my phone was initially locked.my friend brought it from usa.i gave a computer vendor rs 5000 and he said he will factory unlock the iphone.so it was unlocked in this way.its not software unlocked nor it is jailbraked.that vendor said that he will factory unlock it.wat i know is that there are some online sites which take some amount (equal to what i paid 50$ )and officially and factory unlock it
so can u plz help me regarding this issue
its working absolutely fine on 7.1.2

i am from pakistan
my friend got it unlocked from hyderabad ,there the mobile guy assured us that he will factory unlock it for rs 5000.. he just took the imei number and in 3 days iphone 5s was unlocked. he didnt take the phone so i knew he didnt jailbreak it or did some hacking stuff .. i have the box with me too with all accessories.but my friend doesnt know which carrier to it was locked....as his friend gave it to him from usa
on reading problems on net i just stopped the update via wi fi.fearing it will be locked again :/
but i think its orignal carrieer was At&T

Error -5000 and -3253 while downloading

i just bought the Beatles box set
it is composed of songs, videos and LPs
on most of the LP (read here most not all) i have the error -5000
and on 2 videos i have error -3253
from what i have understood error -5000 if a problem with access permissions on my computer
if so why some LP have been correctly downloaded and others don't?
and what is error -3253?

I just spent over an hour on the phone and working through Remote Advisor w/an Apple Technician (AT) going through a plethora of troubleshooting items - all to no avail.
The AT did provide me with his/her specific contact information and promised to get back to me with an update within 24-hours. Although there is no resolution at this time, I do at least have the comfort knowing that this issue has indeed been forwarded to the Engineering team for them to review and address.
I just hope that this is resolved sooner rather than later.
And as an FYI I did suggest that they check out the Community Forums to get better understanding that this is not an issue specific to me alone but to a much broader group.

SAN Port-Channel between Nexus 5000 and Brocade 5100

I have a Nexus 5000 running in NPV mode connected to a Brocade 5100 FC switch using two FC ports on a native FC module in the Nexus 5000. I would like to configure these two physical links as one logical link using a SAN Port-Channel/ISL-Trunk. An ISL trunking license is already installed on the Brocade 5100. The Nexus 5000 is running NX-OS 4.2(1), the Brocade 5100 Fabric OS 6.20. Does anybody know if this is a supported configuration? If so, how can this be configured on the Nexus 5000 and the Brocade 5100? Thank you in advance for any comments.
Best regards,
Florian

I tried that and I could see the status light on the ports come on but it still showed not connected.
I configured another switch (a 3560) with the same config and the same layout with the fiber and I got the connection up on it. I just cant seem to get it on the 4506, would it be something with the supervisor? Could it be wanting to use the 10gb port instead of the 1gb ports?

Solution of dv6-3040ee and 8.1 with vCards Amd mobility radeon HD 5000s and Intel HD Graphics

With my windows 8.1
If I setup the two vCards Amd mobility radeon HD 5000s and Intel HD Graphics
the windows can't open unless I uninstalled one of them
but I need a solution allow me adjust brighness that not found in AMD card but found in Intel vCard
and the most of games Intel can run it but AMD can
Help !!
Now I'm installing The two cards but if i restarted my laptop it wouldn't run
The photo show that ...
http://www3.0zz0.com/2015/04/07/21/289209638.png

Hi there @ZezoOo
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are looking for help with your video drivers for the adapters in your notebook. Unfortunately, after doing some searching, it appears that Windows 8.1 is not a supported operating system for this notebook. HP customized drivers are only available for the Windows 7 operating system.
Please see the following, for some guidance. HP Products - What If I Don't See My Operating System?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in the current iMacs

What is the difference between the Intel HD Graphics 5000 and the Intel Iris Pro Graphics in the current iMacs?

I am assuming you are talking about PPC Macs? Those haven't been manufactured or sold in years (since early 2006 I believe) when Apple started using Intel processors. There are still some apps which run on PPC code only which makes them incompatible with the last three Mac operating systems.
There are different Applecare products depending on which Mac product you buy, although the coverage is about the same (except for iOS devices).

Extending division 50 to Plant 5000 and sale organization 5000

Dear Gurus,
Currently division 50 is available in plant 1000 and sale organization 1000.
I need to extend division 50 to sales organization 5000 and plant 5000.
Kindly provide the step by step procedures to do the same.
Thanks in advance.
Regards,
Rajendran R

Hi,
There is no link for Division and the Plant,
You can assign the Divison to the Sales organisation in the Customizing
path :
IMG>ENTERPRISE STRUCTURE>ASSIGNMENTS--->ASSING DIVISIONS TO SALES ORGANISATION
here you can assign the Division to Sales organisation
Please let me know if you need more details
regards,
santosh

Catalyst 5000 and 5505: Same backplane?

Fellow switch folk,
I'm curious about the nature of the backplane in the Catalyst 5000 and 5505. Specifically: Is it the same backplane, with the difference between the two being mainly in the supervisor engine?
To put this another way: I know using a Supervisor III in a 5505 enables 3.6Gb worth of crosspoint backbone fabric. Would the same thing happen if I replaced a Supervisor II in a Cat-5000 (five-slot)chassis with a Supervisor III?
Inquiring techies want to know... ;-)
Thanks much.

Well, that kind of helped... It showed me the differences between the 5500 series when using the two different supervisor engines.
However, it made no reference at all to the basic 5000 chassis, and it didn't answer my question about the backplane itself at all.
Thanks for trying, though. Anyone else...?

HP Scanjet 5000 and Windows 7

Hi - I have an HP Scanjet 5000, running through a TP-LINK TL-310u MFP & Print Server installed on a Windows XP machine and it works perfectly apart from the fact the user complains about the PC slowing down whenever anyone Scans a document.
So I'm trying to move it onto a Windows 7 machine. And it's *almost* working. From the Windows 7 PC I can quite happily select a users profile (all our users have a profile set with a destination unique to them) and scan a document and it's put in the correct place. However, our users like to scan from the scanner itself by selecting their profile on the LCD and pressing one of the buttons. This is the bit that doesn't work.
I've checked in Devices & Printers -> Scan Properties -> Events and the scan button is set to 'HP Scan Dispatch 3' Not sure if this is correct (other options are 'HP Scanjet 5000 - Scanner Tools Utility') but the other option doesn't work and furthermore stops me being able to scan using profiles from the PC.
In the utility, 'Disable front Panel Buttons' is NOT ticked.
When I connect it back to the Windows XP PC it works straightaway, so I think it's something to do with Windows 7.
Help!
Tony McMahon

I've taken the TP-Link device out of the loop now, and connected directly via USB. I'm still experiencing the same issue - can scan from within the software, but the buttons don't do anything.
It seems to be something to do with the 'HP Scan Dispatch 3' that in the registry is set to use:
C:\Program Files (x86)\Common Files\Hewlett-Packard\Scanjet\5000 (L2715A)\hpScanDispatch3.exe Scan# /StiDevice:%1 /StiEvent:%2;
I don't know what the parameters are supposed to be, but this program simply isn't launching. The other option available under 'Events' from 'Devices & Printers', does start the Scan Utility program, but this isn't the behaviour I'm after - it should perform the scan and save the pdf in the destination without any user intervention.
Any help gratefully received, hopefully whilst I still have some hair left...

HP Slate 500 and HP HDMI to VGA Display Adapter (NP031AA)

The specifications page for the HP HDMI to VGA Display Adapter (NP031AA) (Link) doesn't list the HP Slate 500 as a compatible device in the campatible products list (Link).
Do these two products work together?
What VGA resolutions can I project using this cominbation of products? Am I limited to 1024x600? or 1024x768? or does it support displaying higher resolutions?
I'm thinking about making a purchase but I don't want to get the adapater if it isn't going to work.
Thanks,

Yes an HDMI to VGA adapter will work fine. Keep in mind it will not carry audio but neither did your old vga connection so I am assuming it is not a problem.
You would find an HDMI to VGA at any Best Buy or you can order on one amazon.com such as here:
http://www.amazon.com/BestDealUSA-Adapter-Converter-Laptop-NoteBook/dp/B007PLL4CK/ref=sr_1_2?ie=UTF8...
Connect the projector and use the Windows key at the lower left of the keyboard and the p key at the same time and it brings up a "projector" console that lets you easily switch from laptop to projector to laptop + projector.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Error -5000 and Importing

First off, how in the world do you import a video with this software? I've never been more frustrated. I'm starting with .3g2 files (from my phone), and I've tried converting to H.264 MP4 and M4V files and converting to DV from Quicktime Pro. iMovie refuses to import any of these files, and all it will give me is a -5000 error. Any ideas why iMovie refuses to open movies that iPhoto, iTunes, and Quicktime can all play?

Well, I seemed to have solved the problem myself. Restarting iMovie somehow fixed this problem. I'm so confused.

HP Slate 5000 and SP1

Similar Messages

Maybe you are looking for