Hp slate 6 heating problem, network connectivity problem and now camera problem

Hello, I have using this tablet since last 4 month and after upgrading to kitkat there is phone heating problem and network connectivity problem getting started some time it will show network but during that we can not receiving or calling through it and even after put in flite mode it will not resume so have to restart several time. Now about 4 days ago kernal updating automaticaly in my phone so i happy that may shortout the all problems but rather than it will added one more problem which related to camera while goes in setting of camera it will automatically closed. Have you tested this tablet or not ???? and why from your site any actions has been taken ???Why there is no Solutions are given from your site????

Hello Rohit,Can you check if you updated to the latest version?Here is the link: (you can choose the latest version to download and update it by SD card)- base on your regionhttp://support.hp.com/us-en/drivers/selfservice/HP-Slate-6-VoiceTab/6818329/model/7386537

Similar Messages

Problem with network connection names and cluster

Hi,
Before talking about my problem, I want to apologize if this is not the correct forum, but it is the more adecuated that I have found. Is about a problem in Windows 2000, which I know it is out of support, but in my company I still have to administer several
hundreds of them.
I have several Windows 2000 failover clusters, and all of them show the same problem, which consists of the following:
Each cluster has two nodes. Each node has 5 network adapters. Each adapter hosts a connection name: Lan-1 is the name of the network associated to adapter 1, Lan-2 to adapter 2, and so on till Lan-5 to adapter 5.
Lan-5 is used as heartbeat for the cluster: is connected to the Lan-5 in the other node via a cross-over UTP cable.
Lan-1 and Lan-2 in each node, forms a network team named TEAM, used to access to the nodes for administration via remote desktop.
Last, each node has Lan-3 and Lan-4. Lan-3 is used for the cluster resources, and Lan-4 as a backup, just in case Lan-3 fails.
And now, the strange and surprising thing: if I change the name of Lan-4, or change any configuration of the connection, the name changes to Lan-4(2). If I make any other change, the name changes again to Lan-4(2)(2). I can't get rid of the numbers between
parentesis, and the number of them grows and grows.
Any idea about what is happening?

Hi,
As you mentioned, the Windows 2000 has already stop supported, personal experience is you can try to use the cmdlet ipconfig /all to show if the network adapter name is right
or not, or you can try to remove the lan3 adapter register information (backup first) and driver then restart to monitor the status
More information:
How to remove network adapters from the registry
http://support.microsoft.com/kb/146333/EN-US
Manually Removing Network Adapter Entries from the Registry
http://support.microsoft.com/kb/146333/EN-US
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Weird problem--lost network connectivity wifi and ethernet. Intermittent

I'm posting to this board because my Time Capsule is my router and I suspect this is a router table issue since it affects both wifi and ethernet computers in my household. It only affects the two computers on 10.8.3 at the moment.
Either just after waking from sleep or after working for quite some time on either of these computers, web sites will stop loading. It gives an SSL error but they are not secure sites. Mail stops coming in as well. This is true for any browser. The network connections test as "green" with the built-in diagnostics tools. The only fix I have found is to either restart the machine or simply log out and log back in from the user account. It is very frustrating because we are often working in real-time online. Standard things we use that are affected are Google Docs for schoolwork etc. and my son's Minecraft playing. It is especially frustrating for him because he could be in the middle of a "project" with some of his friends online and this essentially crashes what they were doing.
I have called Apple but it is very hard to explain the issue in an effective manner.
Both machines are logged in as managed accounts but unrestricted access. I just don't like my primary account to be an admin account. I don't want my kids to install stuff without my permission and the managed user allows me to inspect the logs of sites they have visited at the system level, even if they turn on private browsing in Safari or incognito in Chrome.
Does anyone here have any ideas?

It is possible that I upgraded the firmware on the router right when I upgraded the machine to Mountain Lion but I really don't think I did that. I also have a version of the OLD airport utility so I can see the Time Capsule in much more detail.
Linda
If it hasn't reminded you to upgrade the firmware in the last day or so it is already on 7.6.3.. Apple stuff is very insistent on upgrades..
In the old utility (excellent) take it back to 7.6.1. And turn off weekly upgrade reminders.. this will reduce the instances of upgrade reminders to weekly instead of daily.

"Trouble connecting to App World server. Verify your network connections and try again."

Yesterday on the Blackberry website, I changed my user id/ email address, and received a confirmation email from them stating that my account information had been successfully updated. Today, however, I can no longer connect to App World. I keep getting this: "Blackberry App World is having trouble connecting to the Blackberry App World server. Verify your network connections and try again." I also get an error when I try to connect via the internet on my laptop. Could this be related to changing my user id/ email address? I created a new user id just to see if it would work, and it does, so it obviously not a software issue on my phone. How do I get this resolved?

i am having thr same problem
the email address i used for id i no longer use. i tried wiping my playbook and logging in with new email address. i get a message saying to check connections and try again.
i really need help. i have lost all my paid apps. getting very frustrated with blackberry.

"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again."

Hi, I need help please!!!
I am not able to log into my bb app world nor am I able to download or upgrade any aps.
I keep getting this error message..
"BlackBerry App World is having trouble connecting to the BlackBerry App World server. Verify your network connections and try again."
I called my phone provider and they cannot assist me. I tried a bunch of trouble shhoting options such as:
-deleted app world and re-installed from website
-deleted email accounts and re-installed
-changed bb id name and password from website
-tried to log on using wifi and non wifi
Nothing seems to be fixing this issue.
Can someone please help!!!
Thanks!

How long has this been an issue for you?
have you tried to downgrade your appworld?
http://www.bbh-plus.net/downloads.php?do=file&id=2196
Sorry to hear you're having so much trouble with this.
(uninstall first though)
Please click the Thumbs Up icon if this comment has helped you!
If your issue is resolved, please click the solution button on the resolution!
Every BlackBerry should have BlackBerry Protect, get it now! | Follow me on Twitter | Bring Back BBM Music!

Switched networks, then back and now bonjour no longer works

I was testing my neighbors network then i switched back and now my 2 PCs can no longer connect to the printer through bonjour. I ran the bonjour printer utility and it sees the printer on both, but then as it is connecting it says "you do not have sufficient access to your computer to connect to the selected printer" ive tried everything i can think of, i cant get it to wok on either network, and it used to work on mine. Each time it sees it there but gives the same error. I even tried changing the network name and doing it all over agian like the first day i connected them. I can see my shared folders and access files both form the PCs and the Mac. Its only the printers. HELP!!!

Hi abstractls,
You may be having the same problem as me. If the Airport Express is NOT connected to the internet, the Macs will still work, but the PC print routines say "you do not have sufficient access to your computer to connect to the selected printer" or just "An unknown error occurred during printing". If you reconnect the internet, the problem goes away.
I suspect that the PC is not getting an IP address assigned to it by the Airport Express, and cannot cope without it, but the Mac is OK.
My problem is that I do not want to connect the Airport Express to the net, I just want it to share a printer between Macs and PC. Does anyone know of a fix for that problem? I have told the Airport Express to ignore the lack of an internet connection, but that just switches off the amber light...

Problems with internet sharing/network connection/ethernet and XBOX 360

So basically I have a sent my Mac Book Pro 13" (Snow Leopard) away to be fixed, and in return I got a loan Mac Book Pro 15" (Lion). In the two weeks my Mac book was away getting fixed I purchased an XBOX 360, because of my location I am unable to use wireless on my XBOX, so instead I connect the loan Mac Book to the XBOX 360 via network cable.
This worked fine and I could now connect to XBOX Live and be on the Mac Book at the same time.
So today my Mac Book (13") is returned, I connect everything up exactly the same also changing the settings on internet sharing making sure that it can be used to send the connection to other devices via ethernet.
But it just wont connect.
The XBOX doesnt find the connection like it did before, and it also doesnt register on the MAC Book either.
I've tried different cables, the same cable I used where it worked before.
I've tried turning of Virus protection.
Both still at both ends it is not registering a connection, I have used this Mac Book before through a network cable so I dont think there is a problem there, to my knowledge everything is the same as I did on the other Mac Book but this one does work.
Have you any advice or tips on how to get this to work?
Thanks for your time.

What I did to get my network running again (although I still haven't found out why DHCP has stopped working):
1. Open the Control Panel of the computer that's trying to connect to the network (not the computer sharing the internet connection)
2. Go to 'Network' panel, and select the AirPort connection
3. Under the 'TCP/IP' tab, change 'Configure IPv4' pull-down menu from 'Using DHCP' to 'Manually'.
4. Enter an IP address between 10.0.2.2 and 10.0.2.256 (I randomly chose 10.0.2.40), a Subnet Mask of 255.255.255.0, and enter 10.0.2.1 in the Router box.
5. Click "Apply now"
The computer should now be connected to the network, and able to access the internet. If not, you may need to manually enter a DNS server - put '4.2.2.1' (or an IP for a DNS server provided by your ISP) into the 'DNS Servers' box.
You need to do that process for each computer you're trying to connect to the shared network, making sure you enter a different IP Address for each.

Airport network connection comes and goes

I have a belkin N router and an iMac with an original airport card. For the past couple of months the airport will intermittently pretend the network doesn't exist. The router is 30 ft away so the connection is near 100% when it sees the network. When I try to access it manually by typing the network name in through "Other.." it refuses to recognize the network. I have completely cleaned the system software to no effect. Any thoughts very welcome. Thanks.
iMac g4 flat panel Mac OS X (10.3.9) 800 mhz

I am having a similar problem to yours. I have done a clean install of 10.3 several times on my iMac 15" Flat Panel. When I boot up, the Time, Volume & Airport indicators on the right side of the menu bar take a long time (2min.) before they show up. When they do, the airport indicator is 'grey'. When I check Sys Pref - Networks, It says the airport is on but not connected to a network. Other menu bar items on the left boot up normally.
The airport was coming on intermittently so I decided to do a clean reinstall of 10.3, and I removed the bottom cover and re-seated the airport card. Since the clean re-install, all I get is a 'grey' airport indicator everytime.
I'm hoping someone responds to this string with some suggestions...

Last night, WiFi connection dropped and now it's a nightmare...

Last night, my iPad2 suddenly became unable to detect the router form more than about six feet away. It's been working fine since it was purchased just before Christmas, however now, even sitting in the same room about three feet away, it drops from two bars to one, and I need to hold the iPad virtually on top of the router to get it to pick it up.
At home, I reset the router, updated the firmware, I've playeed with the router's channels, modes, name, every suggestion I could find online. I reset the iPad, updated it, hard reset.
I took it to the Apple store today, and it connected to their WiFi with no problems, full signal. I'm guessing, however, they don't use the average type of router you'd find in a normal household in their cavernous stores. As they could detect no issues with it, I was sent away, no better off.
It's still under warranty - it's barely four months old - and I'm at my wits end already. I've spent all day online (via my laptop!) and read endless forums about users with sinmilar issues, however I've been happily using the iPad since purchase without issue. Any suggesitons welcome; my ideal outcome? I'd quite like it replaced to be honest, but Apple won't be willing to do it obviously if they can't replicate the problem.
In my opinion, it's an issue with the antenna - I've had this issue with a wireless card in a laptop many years ago, whereby a signal was possible, but severely diminished. I may be wrong, of course, but it's very frustrating, and a strange thing to happen out of the blue.

It's a Netgear VDMG280 (crap router supplied by Virgin)
2.4
I've restarted the iPad constantly, with every change to the router's settings; nothing seems to be helping.
I have the usual types of kit in the house, two laptops,an xbox, a ps3, and they are all connecting fine. It literally happened last night - sitting watching the ITVplayer in the other room, and the signal disappeared and couldn't pick it up again.
I presently have one bar sitting about three feet away, directly in front of the router. Asbolutely furious about it, and if it's the result of an update, I don't really feel it's fit for purpose and I'd like to think I'm well within my rights to request a replacement for it - but I'd rather just sort it myself, frankly.
It's very disappointing, to be sitting here with a £400 Angry Birds player.

Adobe Story going offline because of connection issues and now won't go into Online mode.

Adobe team. Need immediately to be able to go Online again.
Doug Morrow

When it restored it updated to firmware 4.0.2
Sounds like your phone was also locked back to the carrier it was originally locked to. That happens when you update software or restore an iphone that has been hacked to unlock it. Unfortunately for you, you won't be able to do anything with that phone until its first activated on the carrier's network(requires that carrier's sim) it was originally locked to. So yes, in a sense, you're SOL.

I plugged my iPod 5th gen into a picaxe socket thinking it was an iPod connection socket and now my iPod wont turn on even if i try charging it. Pls reply asap. What do i need to do?

Pls help as soon as you can.

Perhaps something here will help:
http://support.apple.com/kb/TS2771
If not, then most likely you have damaged the iPod and will need to take or send it to Apple and pay their out-of-warranty replacement price.
Regards.

Windows 10 for phones emulators on Windows 10 10041 - problem with network connection

Hi,
I can't connect to Internet on Windows 10 mobile emulators on Windows 10041. I have tried to resolve problem. First I noticed, there was problem with displaying properties main network connection. I had reinstalled network driver. After that I reinstalled
Hyper-V on Windows and recreated virtual machines for mobile emulators. Nothing helps.
On the same machine Windows Phone 8.1 emulator on Windows 8 has access to Internet.
I don't know if there was issue which is discribed
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/01/why-can-t-the-windows-phone-emulator-go-online.aspx, becuse the same configuration I have on Windiows 8.1 and Windows 10 and on Windows 8.1 I have access and on Windows 10 I haven't.
Martin

I just disabled bluetooth connection in Network Connections panel and I have access to Internet in Windows 10 emulator!

When I open Firefox, it is not automatically opening a network connection. I have to manually open the network connection before browsing. How do I get Firefox to automatically open the connection?

I have to click on the network connections icon and ask it to refresh before Firefox makes the connection. This never happened with Explorer and I don't remember it happening the first few months with Firefox. Did I foul up my settings somehow? Or add plug-in or extension that is causing this?

Every now and then, you should run these programs<BR><BR>
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Windows 2012 Datacenter R2 - Network Connections Confusion

I have recently created a 2012 Datacenter install with the goal to create virtualize test lab.
As part of the install two connections were created:
1. Labeled 'Ethernet' with Hyper-V Extensible Virtual Switch protocol enabled.
2 Labeled 'Network 2' vEthernet (....Controller - Virtual Switch) with the standard networking protocols enabled.
3. Network 2 interface is connected to the local area network.
Ethernet adapter vEthernet (Realtek PCIe GBE Family Controller - Virtual Switch):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : BC-5F-F4-3B-11-EE
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.0.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
DNS Servers . . . . . . . . . . . : 8.8.8.8
8.8.4.4
NetBIOS over Tcpip. . . . . . . . : Enabled
I am confused with the purpose of the network connection "Ethernet" and Hyper-Virtual Switch protocol and how this relates the "network 2" interface. I uncertain which network connection is the physical connections.
I have tried to research this with "windows 2012 datacenter network connection configuration, setup, and etc.", the results are a lot of the complex examination of setting of Hyper-V implementation, clusters, DHCP, and etc.
I hoping to locate information that will explain the fundamentals of these related technologies (tutorial, youtube videos, etc.). Any helpful advice is welcome.

Hi,
Based on the information which you provide, you created an External virtual switch, which binds to the physical network adapter so that virtual machines can access a physical network.
->I am confused with the purpose of the network connection “Ethernet” and Hyper-Virtual Switch protocol and how this relates the “network 2” interface. I uncertain which network connection is the physical connections.
->Network 2 interface is connected to the local area network.
Based on your description, I suppose that you encountered some problems with understanding virtual network switch. When we install Hyper-V and create an external virtual network, the management operating system uses a new virtual network
adapter to connect to the physical network. The network connections consist of the original network adapter and the new virtual network adapter. The original physical network adapter does not have anything bound to it. However, the virtual network adapter
has all of the standard protocols and services bound to it. Here, the “vEthernet” is the new virtual network adapter, and the “Ethernet” was the original physical network adapter. Hyper-V binds the Virtual Network Service Protocol to the physical network adapter
when an external virtual network is created. So the “Ethernet” has the Hyper-V Extensible Virtual Switch only. The physical adapter was equal to a virtual switch at this moment, all networking traffic is routed though the virtual switch.
And to the physical machine, due to the physical adapter is a virtual switch now, so the new virtual network adapter is its network adapter now. So we can see the all TCP/IP configurations of vEthernet are the same with the local area
network.
For more details about virtual network switch, please refer to the link below,
http://technet.microsoft.com/en-us/library/dd581798(v=WS.10).aspx
Best Regards,
Tina

Network connection error, not able to download from App Store. But am able to download other stuffs with my browser !?

Am getting a Network Connection error and am not able to download apps from the App store. But to check my network connection, when I download stuffs using my Browser, it downloads as usual ! So what is the problem & its solution? please reply.. Thank you.

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ Proxies. If any proxies are selected, deselect them, apply your changes, and try again. You must apply the changes before they take effect. You don’t need to change the other settings.

Hp slate 6 heating problem, network connectivity problem and now camera problem

Similar Messages

Maybe you are looking for