Hp Slate 7-2801 charging port is loose & doesn't charge anymore

I too have the sam problem in charging my hp tab. I guess the charging port is loose and doesn't fit well (tightly)with the cable. Now my battery is drained out and i have no way of charging it. Have tried other cables also but din't help.
The model is HP slate 7-2801. Could someone please assist me solving this problem. 

Hi @DebiJeya ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, click HERE.
RedViking6
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Phone wont charge.....charging port is loose

    So, this is my 4th phone and am now waiting on the 5th relpacement.   Each phone has had the same issue where the charging port is loose and then the phone wont hold a charge.    I took to verizon store at lunch today and the saleswoman said that she hadnt heard of this issue with these phones.   I asked her to replace with something equivilant that would not have this issue and of course was told that verizon could not do anything for me but order yet another replacement.    now have to wait two days for a replacement and this is my sole phone that my kids use to call me on.   The phone will die before the end of the day and I am out of luck.   I am frustrated by the way that verizon did not really want to work with me and I am over having to replace the phone ever 2-3 months.
    Is there a fix short of replacing.....and is this a known issue with these phones??

    Temp fix is a do it your self deal. 1. Power down phone. 2. Using as fine point machinist or eye glass screw driver or needle tip, (Razor blade works good) squeeze the female port together from around the outside edge making the hole more tight. Do not try this with a loved one, phone only. It will work for a few more day till you get the new one. Do not tell Version you did this as they will have an excuse to denies responsibility for replacement or repair.

  • I want to know if my charger port is dirty or my charger dosent work

    i want to know if my charger port is dirty or my charger dosent work

    Since no one here can inspect your iPhone's dock connector port, only you can answer that question.
    If whatever problem occurs when the iPhone is connected to the included power adaptor and when connected to your computer using another cable that is known good, the problem is with your iPhone. Could be dirt, lint, or foreign material and it doesn't take much, or the connector port has some damage including possible moisture damage.

  • My iPod touch shows that it is charging but it actually doesn't charge and I've tried to restore/ restart it but the only icon is the charging icon with the battery icon with a bit of red fill and a small lightning icon below it. Can anybody help me?

    My iPod touch shows that it is charging but it actually doesn't charge and I've tried to restore/ restart it because the only icon is the charging icon, the one with the battery icon with a bit of red fill and a small lightning icon below it. Can anybody help me and give me solutions before I go to an apple service center?

    Place the iPod Touch into DFU mode.  This will be similer to what the factory would do to install the iOS onto new iOS devices.
    Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
    To place your iOS device into DFU mode.
    First connect you iOS device to you computer.
    Open iTunes if not already open
    Now turn off your iOS device using the power swipe.
    Press the home and sleep button on your iOS device for 10 seconds.
    Release the sleep button but carry on holding down the home button.  For another 10 seconds.
    Your iOS device should now be on DFU.  Click on restore and iTunes will download the lastest iOS for your device.
    Hopefully that sorts it if not, you will have to go to a sevice centre or call Apple Care up and get them to collect it and repair it. (replace it)

  • Charger port is loose?

    Hey,
    I'm not sure if this should be in this thread, so sorry if it's in the wrong place.
    My charger port in my laptop has came a little loose, I had to shake the charger a bit as I plugged it in to get the light to show it was charging. I plugged it in this morning and it won't charge anymore but I'm being very confused in that it says it's not charging but the battery life has gone up 30% since I turned it on.
    Does anyone know the best way to go about getting this fixed? The quicker the better if possible, I have a lot of my final college stuff to be done soon and I can't really afford to have my laptop away for extended periods of time.
    Cheers

    This is not ciovered by warranty and the only fix HP would know to do is to replace the motherboard at a cost of about $400. If you are still getting a trickle charge you can likely use the laptop for a while yet. Just keep it plugged in all the time and keep the battery as charged as possible. When your college finals are over you will want to take it to a local computer shop not one of the big box stores and ask if they know how to resolder the AC adapter port module. There is at least one shop that can do it in any major city. The cost is likely to be about $100-200. There are also internet services but sending it out would mean you were without the laptop for at least 3 or 4 days if not longer.

  • Using both usb ports the macbook doesn't charge, is that normal?

    Hi, as headline says I'm using both the usb ports of my macbook pro 13", with an external HD and an externat audio interface. The macbook is attached to the charger, but it's not charging (i guess it's using the power without charging). The Macbook it's not fully charged.
    thank you
    Federico

    And what happens if you disconnect everything from the USB ports? BTW, your charger will kick in when the battery charge falls below 94%.

  • My original Apple charger and lightning cable doesn't charge my iphone 5 and ipad 3rd generation.

    Both my devices are low in batt and i need to to use it tomorrow for work. Who would compensate my losses???
    Pardon me i'm not trying to create a scene here. When i first gotten my iphone 5 (new and sealed) and before upgrading to ios 7, everything works fine. After i upgraded to ios 7, the phone main camera lost its focus after a few days usage. Fortunately the phone is under warranty and was replaced at an authorised lab BUT unfortunately i lost a fair deal of data (sms, whatsapp chat history) along the way, although most of the things have been backed up. Since there is no turning back, there is nothing i could do but to face it. And that's not all...
    After a good usage of just 3 weeks, with the exact same charger and cable (both original from that came with the phone), it suddenly failed to charge. I have tried plugging it in and out and still to no avail. By the way i have not mention, the ORIGINAL lightning cable sleeve gave way after just a few weeks use. And do mind that it was HOME USE. Havent been brought out to use roughly.
    And guess what, I JUST TRIED PLUGGED THE ORIGINAL LIGHTNING CABLE TO A SAMSUNG CHARGER AND IT WORKED.
    I hereby swear to God that every word i said here is nothing but the truth. Not spamming. It has already caused me countless inconvenience but still i will bring the charger and the phone to the authorised lab once again to have it checked, and looking forward to get an explanation.     

    Both charger and cable are covered under warranty as well.  Get them replaced.
    Who would compensate my losses???
    Nobody

  • My iPad charger banged and now doesn't charge my iPad have tried other USB cables but nothing

    Looking for some info on my charger for ipad2. It banged lat night and now won't charge my iPad have tried different USB cables in it but nothing happens

    The iPhone charger will likely work, but will be MUCH slower than the one that came with the iPad.
    Check the apple online store. You can purchase them.

  • OSP Item, type Currency, charge type PO Move, doesn't charge WIP job.

    Oracle Apps Version: 11.5.10
    Regarding outside processing resources that are of type 'Currency'.
    These are PO Move resources, with a standard rate.
    There is a routing that has a usage defined for this resource on the primary routing.
    When processing this item with a discrete job and completing the outside processing receipt, the amount charged to the Outside processing WIP account is 0.00, not the amount on the resource usage multiplied by the rate.
    When duplicating the exact same scenario, except with a resource of type 'Machine' or 'Person', WIP is charged appropriately after the receipt.
    Why is this? Aren't currency resources supposed to charge WIP?
    Issue/question relates to OSP resources of type Currency. These do not seem to charge the WIP account. Can this be explained?
    Message was edited by:
    sharkema

    Hi Sharkema
    What kind of work is performed by this OSP? Why do you need a Currency resource? Can you clarufy that?
    Regards,
    Ricardo Cabral

  • Not Charging, possible loose charging port.

    I have a 2007 Toshiba Satellite laptop. 
    I believe that my charging port is loose and I'm just wondering if I can open up the back and tighten it or something? 
    It plugs in but does not charge and the charging port in the computer wiggles around. 
    Is there a fix? 
    Thanks in advance!

    Hi Dozib,
    There's a "Resolving issues" section in this article which has some additional steps to try.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    Resolving issues
    If your battery doesn't charge, or if your device shows a low-battery image, black screen, or "accessory not supported" alert, follow these steps.
    Inspect the connector at the bottom of the phone:
        Make sure that there are no bent pins in the connector.
        Make sure that the connector is free from debris.
        If there are bent pins or debris, please contact Apple Support.
        Otherwise, continue troubleshooting.
    Make sure that the outlet you're using works.
    Make sure that the Apple USB cable and Apple USB power adapter work.
    Plug the device in to power and let it charge until your device turns on. This could take between 10 and 30 minutes. If you don't have an Apple USB power adapter, try connecting to a computer's high-power USB 2.0 port (not a keyboard). The computer must be on.
    If the device still exhibits an issue, try turning your device off and then on again while connected to power.
    If the issue persists, please contact Apple Support.
    Best Regards,
    Nubz

  • Charge port isnt working i guess and it wont connect to itunes or my computer at all. ipad is dead and i want to get my pictures off of it. how can i do this??

    i think my charger port is broken bc no charger will work to charge my ipad and i can't connect to computer. i dont have icloud. i want my pictures off my ipad2. please help

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or                     
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Can the hp compaq 6735s charging port be repaired

    hi all
    please i need a hardware specialist who is conversant to the HP compaq 6735s AMD sempron 1gig ram notebook
    to help me on this one
    my laptop recently stopped charging
    it will only blink several times when you try to put it on
    i tried a working ac adapter from another laptop of same model
    but it still did not work.
    then i charged the battery with a laptop of same model and inserted back to my laptop
    and the laptop powered on but still cannot be charged through the charging port
    i was told the charging port is bad.
    please is it possible to change the charging port of the hp compaq 6735s without changing the entire motherboard
    or do i have to buy another motherboard entirely cos someone said it is not possible...
    thanks i really appreciate all your help

    It is possible but requires fine soldering and removing (not replacing) the motherboard. You remove the old power jack module and solder a new one in place.There are many shops on the internet that will do the job for $100-150US. Post back if you want more help.

  • If your iPod charger port is broken, can you use a wireless charger?

    The little orange thingies inside of my ipod 4th gen charger port are bent, can i charge it using a wireless charger tht you set the device on top of ?

    No.

  • GNEX doesn't charge in my car

    I have recently started having issues with my GNEX charging in the car.  I purchased the phone in January 2012 and have had no issues other than battery life which I purchased the factory Samsung 2100 series battery to help with.  About one month ago the phone stopped charging in any of my vehicle charging ports when using the Samsung charger.  I noticed that if I wiggled the cord at the micro USB port connection I would occasionally get confirmation of the lightening bolt that the phone was charging.  I thought that it was the USB cord so I replaced it with a new one that I has purchased from ZAGG as well as a new ZAGG charger.  No dice, so I returned the charger but kept the cord.  I then tried my original Samsung plug with the ZAGG cord, again it wouldn't charge.  I then tried my Samsung cord with a new SCOCSHE charging plug, finally it worked, or so I thought, it showed charging for about 2 minutes and then actually quit charging.  I took it to my local cellular repair shop and they said it was a broken MICRO USB port so I paid them $65 to repair it.  I plugged it back into my car and immediately it showed it was charging, only to last about 2 minutes again and quit charging.  I have gone thru all my apps and uninstalled anything that I installed in the last 2 months and there has been no change.  I have also plugged it into my wife's car and it does the same thing. I have not done a factory reset on the phone because I don't want to lose everything I have on it.  There is no water damage to the phone at all.  I have insurance thru Verizon/Assurion what are my options?  I have to have a working charged phone for my work.
    Thanks
    Philip

        Thanks for sharing so many details about this problem and what you've done to attempt to remedy the situation Philip68. It looks like you've done quite a bit to determine this isn't an issue with the charger itself or your car. Do you know how long this has been going on? I'm not showing a recent software update. Do you notice if this started after a previous update? I saw from the other thread you replied on that some people said the phone charges while off. Do you notice the same thing? If you go to Settings, Battery and then plug in the phone? What does it show as the status?
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • My iphone 5 suddenly stopped charging.  It's not working on any of my charging devices or with the apple charger

    Just yesterday my IPhone 5 stopped charging.  It won't charge on any of my docks, nor from the computer or from the charger that comes with the phone.  Anyone have this problem and know what to do to fix it.  I don't want to upgrade to the IPhone 6, I like my Iphone 5.

    Hey Fran0417,
    I understand your iPhone is not charging no matter what you connect it to.  You have tried different charging sources.  To further isolate, have you tried more than one cable?
    Going further, please check out this article
    If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
    If the battery doesn’t charge
    If the battery doesn’t charge, unplug your device and try these steps:
    Look at the connector at the bottom of your device and make sure it’s free of debris.
    If you're using a USB power adapter, make sure it's plugged in all the way and the power outlet is working. If you're connecting to a computer, make sure it's on and can charge your device. To charge an iPad, you might need to use a USB power adapter and plug into a power outlet.
    Try a different USB cable, USB power adapter, or USB port.
    If everything seems to be working, reconnect your device and wait for 30 minutes.
    If your device still doesn’t charge, try to restart it while it's connected to power. If you can't restart, reset your device.
    If that doesn't help, continue with the article to the end.
    Regards,
    Nubz

Maybe you are looking for

  • Problem with Photoshop Elements 6.0 disc

    When I purchased a wacom bamboo fun tablet last year it came with free a Adobe Photoshop Elements 6.0 disc. However, the disc isn't working. I hvae my serial number and everything, but whne I put the dic in the drive, nothing happens. Is there any wa

  • ICal Alarm Editing Bug, not fixed yet in 10.5.3?

    Hi All Mac users, I have noticed this bug for quite a long while, which I cannot remember from when, but I think it was from around 10.3 or 10.4. I am used to it, and can deal with this since I know it. But, it still seems to persist even after updat

  • XSLT and XQuery recommendation for BPEL and OSB

    Hi, 1. Why is XQuery recommeded for OSB and XSLT for BPEL. Are there any specific performance optimization reason behind this. 2. Apart from OSB and BPEL, both XSLT and XQuery has xml transformation options and creating HTML. What is the difference b

  • Is it possible to change screenlock background on ...

    Hi. I have a nokia c7 phone, and I would like to change the background for the screen that requires you to enter the lock code. The background for the screen is currently all grey where it says "lockcode: and then a numpad for entering the lock code.

  • Addressing an email in Mavericks

    After updating to Mavericks, I found that when I went to type in the person's name in the To: that I would press return after putting in their name and would get a double addressing. In other words, their name would enter twice. I don't know how to s