HP SLate 7 Extreme OS Update to 5.0(Lollipop)

Is the HP slate 7 extreme will recieve an OTA update for android 5.0 (lollipop)?

Hello, and Welcome to the HP Support Community!
Unfortunately, HP does not advertise the exact dates updates will occur.
When they are ready, they will be pushed to your device OTA (Over The Air).
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Hp Slate Extreme 7

I am to get in contact with tech support from HP. I have had a 4400US hp slate extreme 7 for about a year now and it has worked great. I recieved a OTA update notification 2 days ago so i took and it began the install. The install was about 3/4 of the way done and the screen turned black. It is in APX mode that much i have figured out. However i dont have recovery bootloader nothing. The only options are off or APX mode. This device was not rooted or anything completely stock. Since the OTA update has done this to my tablet i want it replaced. I have done nothing to it in any way other than the updates from Google or OTA. I am willing to do what i need to get it fixed. I dont have the money to buy a new one and phone support keeps telling me a have to pay for support on a device that there update broke and rendered useless now.
If anyone has any ideas im willing to listen or try to fix it. Please HP i need this for my work as i use it everyday. I really thought hp suupport was better than this, but it appears i may be mistaken.

Is the OTA upgrade finished? If not, try to recover your unit by downloading the image here: http://support.hp.com/us-en/drivers/selfservice/HP-Slate-7-Extreme-Tablet/5447824/model/6608631#Z7_3...
Put the image in micro SD card and do the recovery by pressing Power Button + Volume Up for 3 - 5 seconds.
Select recover from SD card and go from there.

Airport extreme firmware update screwed up my IP sharing and internet

I am having all the same problems -
1) I upgraded to the 7.1 firmware
2) I got the 'double NAT' error, but no problems connecting to the internet
3) When I turned the bridge mode to off, I lost my internet, so I
4) Tried to turn the bridge mode back to Share an IP address, but got an error about IP addresses.
5) I went into Setup - the network port mapping tab - and unchecked and then re-checked the Airport button, so now I have internet access, but only at one computer, and if my computer is functional, my VOIP modem is not (or vice versa)!
6) when I tried going back into "Share an IP address", I got the same error about the beginning and end DHCP conflicting with my WAN.
(If it helps to know, I have two AEBS - one is set up as the Main WDS station, and the other Participates in that WDS)
Now I'm afraid to touch anything!!

kayek wrote:
I have installed the new AirPort Extreme firmware update (7.4.1) and with airport disk utility i want to connect automatically my hard drive related to the airport (wifi mode) , the connexion was working well before that update and now i have an error message (unknown user or wrong password error -36 ...) when the disk tries to connect automatically.
I would like to rollback to the 7.3.2 firmware version but there is no way to find it on internet (or on apple download) even if i change rollback airport utility to version 5.4.1: the binary firmware 7.3.2 disapeared from my mac and i can only choose 7.4.1 binary file ...
Do anyone have the same problem ?I you found how to fix it please answer my post (thanks)
Ok, here's how you actually do the downgrade - here's what Apple says, not exactly right - I would add that you HAVE to go to the MENU, choose BASE STATION, then hold down the Option key while pressing UPLOAD FIRMWARE, this will get you to a window that has the dropdown with older versions....the other versions were not available to me any other way.
{quote}If I have a computer or device that does not work well with an AWD with the latest update, how can I install previous (earlier) versions of firmware?
1. Open AirPort Utility.
2. From the AirPort Utility menu, hold the Option key (Control key in Windows XP and Vista) and choose Check for Updates....
3. Select the specific firmware version you require.
4. Click Download.
5. Select your base station and choose Manual Setup from the Base Station menu, or double-click on the AWD icon.
6. Choose Base Station > Upload Firmware.
7. Select a firmware version and click OK.{/quote}

Airport Extreme Firmware Update 7.3.2 no longer connects to internet

Automatic Updates recommended Airport Extreme Firmware Update 7.3.2, which I accepted (BAD). The Airport Extreme does have a green light, but CANNOT connect to the internet. Cannot "Check for Updates" with Airport Utility (option key down) because I cannot access the internet. Airport Utility shows 7.3.2, but nothing lower. Is there a location on the mac where the older driver resides?
Numerous restarts, resets, etc with both the Cable Modem and Airport Extreme and my MacBook do not help.
How do I download 7.3.1? Can I? How can I revert?
I can access the internet from another network, hence this email.
Any suggestions would help!

When I updated to the Airport Extreme to 7.3.2 firmware it was dropping wireless connections randomly, Today I reverted back to 7.3.1 and looks like it is staying up for now but I am still shell shocked. To revert back in Airport Utility:
1) Hold down the option key(Mac), the Control key for Windows at the same time clicking on Check for updates
This will open a popup window with the previous versions, select the Airport Extreme Firmware 7.3.1 update and click download.
2) After the download is done, from Base station file menu drop down select Upload Firmware, you will get a choice to download different firmware updates, select 7.3.1.
That should install the 7.3.1.
There you go enjoy.

Do I need Airport Extreme FW update?

I use Airport Express as a transmitter for wireless LAN. I have airport cards in all three computers and the network works fine. I do not have physical airport base station.
I have updated the Airport Express with new firmware without problem.
In airport utility I do show base station which can be configured although there is only Airport extreme card.
When I tried to update Airport Extreme firmware no base station showed up to be updated.
Am I correct assuming that I don't need the Airport Extreme firmware update since I don't have the physical base station and the network is run from Airport Express?
Milan

I use Airport Express as a transmitter for wireless
LAN.
That is an Airport Express Base Station (AX) and will show up in Airport Admin Utility as a Base Station with whatever name you have given it (hopefully not Airport extreme card!).
That's similar but different from the Airport Extreme Base Station (AEBS).
Am I correct assuming that I don't need the Airport
Extreme firmware
Yes. The Express should be listed in Admin and when selected show at the bottom Apple Base Station V6.3.

Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted. The only problem is with Lollipop.
PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
The audio file formats which fail to stream are: mp3 and wav
The video file formats which fail to stream are: mp4, avi and 3gp
JPEG Images appear to work fine, but I haven't tried other formats.
I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
Any ideas?

Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

HP Slate 7 Beats Update?

Hello I'm I Own A HP Slate 7 Beats Special Edition And I Have A Question. When Will HP Update Its Firmware To 4.3 Or Higher. I Want To Use A App But I Need Open Gl 3 And That's Only For 4.4 And Higher.

Hello, and Welcome to the HP Support Community!
I'm Sorry, But HP Has Not Announced Any Update For This Series Of Tablet...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Hp slate 7 voicetab update problem

hi
i have issue with my hp slate 7 voicetab
i get notification that kitkat update is available,i tried to update my tab ,download was completeand then it started rebooting,but in rebooting my tab stopped updating and shows a red triangle on android chest
after reboot it goes to recovery mode
in recovery mode i select reboot now
after reboot it again goes to recovey mode
PLEASE HELP ME
Sorry for my bad english

Please try the following.
1. Download the update.zip for your device and copy the file to the root directory of an empty micro-SD card (at least 1 GB, FAT 32 format). Do not unzip this file. You can find the update.zip for your device here: HP - Drivers & Downloads.
NOTE: You will need the exact model number to locate the correct package. There are multiple update.zip recovery images available. Ensure you select the correct download for your region. If your tablet does not boot after attempting to update you may need to try both the KitKat and JellyBean images. For information on finding your product or model number click here: Finding Your HP Product Model Number.
2. Fully charge the tablet and then disconnect the power from the device.
3. Power off the device.
If your tablets micro-SD slot is on the side or bottom of your tablet skip to step 5.
4a. Place the tablet on a flat surface, display panel side down, with the release notch towards you.
NOTE: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of any foreign objects. Failure to follow this caution can result in damage to the display panel assembly.
4b. Remove the back cover. Use the release notch to remove the back cover.
4c. Insert the micro-SD memory card into the reader slot.
4d. Reverse the procedure detailed above to install the back cover and continue to step 6.
5. Insert the micro-SD card into the micro-SD card reader.
6. Press and hold the volume up button and power button at the same time.
7. When the HP logo appears on the screen, release all the buttons.
8. When the Android system recovery menu appears, use the volume down button to highlight "apply update from external storage".
9. Press the power button to validate "apply update from external storage".
10. Use the volume down button to highlight the software recovery file, update.zip.
11. Press the power button to select the update.zip file and launch the recovery.
NOTE: Wait until the entire recovery process finishes. The device might seem unresponsive at times (multiple reboots and black screens) when it is performing the update.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Skype problems with Airport Extreme after update

I use Skype to call regular phones and landlines. For over a year now it has worked well with my Airport Extreme, however, I noticed that around the same time I updated my Airport utility to 5.5.2 and Mac OS X update on 1/7/11 I am having problems with audio getting scrambled, the person on the other end dropping out, and my voice dropping out of their calls and the sound of me "being in a long tunnel," as they describe it. If I plug the ethernet directly into my computer there is no problem so I know it is the Airport base station.
I have tried plugging and unplugging the base station and I had comcast reset my cable modem but nothing seems to be working. I have 12 mbps internet so I know it is not a bandwidth problem.
Please help! Thank you!

Indeed I have the same problem. I ended up buying a new router because I thought mine was malfunctioning. After buying the latest generation Airport Extreme, turns out it's having the same problem. I agree that it was not a problem until 5.5.2. Also, I use YouSendIt constantly and it also chokes the Airport Extreme. It appears to happen in scenarios of high bandwidth usage.
5.5.3 maybe coming soon?

Cannot download latest airport extreme security update.

When I try to download it, it say, it cannot download on my computer.
I checked to make sure I had the correct build in the kbase and I have.
I tried and tried.
I downloaded straight from the ethernet to my computer, not from my airport extreme base station. Still wouldn't no install.
I tried doing it just while using my airport basestation...still won't install..
The words, this software cannot be installed on your computer.
I tried doing it through the extreme base station.
Any advice?
When I do a software update, the airport security update does not come up.

Since my Tiger 10.4.7 computer is awaiting a replacement battery on recall,
I have not updated some of the software in it, because I haven't been able
to really use it for more than a month of waiting.
But, there are a few different recent downloads for 10.4.7 computers; and
some are specific to Intel® equipped new Mac hardware. What download(s)
are you referring to exactly (?) - as shown here:
http://www.apple.com/support/downloads/
My 10.3.9 computer is in reasonably good shape; and the last AirPort
download did not seem to apply to it; sure, I downloaded one, but the
other did not seem to apply. And from what I heard from a few user's
experience after one of the 10.4.7 Airport downloads, I'm glad it didn't
want to be downloaded in my situation; since my wireless just works.
And there's nobody nearby to try to gain access to my wi-fi system.
Did you try repairing disk permissions before any download/install
attempts; and is the system in otherwise good general repair?

AirPort Extreme firmware update fails due to proxy

Have latest AirPort Extreme (tower) hardware at work, with v7.7 firmware, and am trying to upgrade the firmware to 7.7.3 via AirPort Utility v6.3.2 in Mavericks OS X 10.9.5. The Extreme is on the work network behind a proxy server. There is no capability to specify proxy information to the AirPort Utility, although my MacBook is properly configured with the proxy server in network settings. Every time I try to perform "Update" on the Extreme in AirPort Utility, I get "Downloading Firmware" and then "An error occurred while downloading firmware." I presume the MacBook would be downloading firmware and going thru the proxy to get it, and then applying the firmware update to the extreme, but I can't get the firmware downloaded.

If you or any of your work colleagues has a AE AC model at home.. their laptop would already have the firmware sitting on it.. and as long as you select the right one it should work.. if they upgraded their hardware with that laptop.
In one way the nice thing with Apple is the sheer limited amount of hardware there is..
Apple have just one AC model AE.. the latest firmware is 7.7.3 AFAIK.. I stay away from latest AC products as they are troublesome.
About AirPort base station firmware updates
Does AirPort Utility for OS X keep an archive of all my AirPort base station firmware updates?
AirPort Utility keeps an archive of all Wi-Fi Base Station firmware updates you install, and stores them in ~/Library/Application Support/Apple/AirPort/Firmware

Airport Extreme Firmware update?

Hi all, as part of a seperate issue am experiencing with network transmission speeds I'm checking to see if I can update my Airport Extreme firmware.
Currently, the Software Updates section doesn't find any updates and the current firmware I'm using is 4.80.46.0 yet there appears to be a new version at http://www.apple.com/support/downloads/airportextremefwupdate.html
Is that Firmware applicable? Is there a resident page that shows all of the Airport Extreme wireless cards firmware versions and updates?

Bravo,
OK... I see....
Then the Software Update would the in fact show you the latest updates for the Airport Extreme Card.... I have never seen a firmware update for the card but then it could be contained within the update itself.
The latest Airport software is 4.2...
My firmware version on the G5 iMac is 405.1 (3.90.34.0.p18)
Nothing we can do about that, that know of.
Whiskey Tango... Out

Noisy Airport Extreme after updating

According to the flasing light in my Airport Extreme there was an update available for it. I downloaded the update and ever since the base station makes a funny noise. It's working fine and I have no problems with the base station; my laptop works fine as does my Ipod Touch and the Time Machine but I'm wondering what the noise is.
Any ideas and should I worry about it?
Thanks.

Joseph.
Thank you for the reply. I unplugged the unit for about 10 seconds, plugged it back in and thought the noise was gone. But after the yellow light turned to steady greeen the noise came back. The noise is hard to describe, it's kind of a static like noise but has a rhythm to it. Like I said everything works okay but it only starting making the noise after I installed the update.
Don't know where to go from here.
Thanks for your efforts.

Airport Extreme Firmware updating

I've got two older Airport Extremes (Gen 2 and Gen 4). I'm assuming that the "Version" listed in the information popup is the version of the firmware on the device.
Would the Airport Utility check all devices for firmware updates when configured in the following manner?
If not how would I check and update each station separately?
Thanks

All AirPorts are up to date with the latest firmware.
You will see a red badge with a number 1 next to the AirPort in AirPort Utility if a firmware update is available in the future.
7.6.4 has not been updated for a few years, so it is unlikely that it will see any future updates.
7.7.3 will likely be updated in the near future.

HP SLate 7 Extreme OS Update to 5.0(Lollipop)

Similar Messages

Maybe you are looking for