Hp Slate Extreme 7

I am  to get in contact with tech support from HP. I have had  a 4400US hp slate extreme 7 for about a year now and it has worked great. I recieved a OTA update notification 2 days ago so i took and it began the install. The install was about 3/4 of the way done and the screen turned black. It is in APX mode that much i have figured out. However i dont have recovery bootloader nothing. The only options are off or APX mode. This device was not rooted or anything completely stock. Since the OTA update has done this to my tablet i want it replaced. I have done nothing to it in any way other than the updates from Google or OTA. I am willing to do what i need to get it fixed. I dont have the money to buy a new one and phone support keeps telling me a have to pay for support on a device that there update broke and rendered useless now.
If anyone has any ideas im willing to listen or try to fix it. Please HP i need this for my work as i use it everyday. I really thought hp suupport was better than this, but it appears i may be mistaken.

Is the OTA upgrade finished? If not, try to recover your unit by downloading the image here: http://support.hp.com/us-en/drivers/selfservice/HP-Slate-7-Extreme-Tablet/5447824/model/6608631#Z7_3...
Put the image in micro SD card and do the recovery by pressing Power Button + Volume Up for 3 - 5 seconds.
Select recover from SD card and go from there.

Similar Messages

  • HP Slate 7 Extreme Android 5.1 Lollipop

    Hi: nVidia just release the Tegra Note 7 update to Android 5.1 Lollipop (https://twitter.com/nvidiashield/status/624279523572498434) when will be available to the Slate Extreme since basically is the same device? can I update to the rom of the Tegra Note 7? thanks,

    Laca_ wrote:
    The question remains, will hp push lollipop for slate 7 extreme? Would be great to have usable sd card support again...I seriously doubt this will occur. There are newer tablets from HP than the Extreme that have yet to receive KitKat!    WyreNut

  • HP SLate 7 Extreme OS Update to 5.0(Lollipop)

    Is the HP slate 7 extreme will recieve an OTA update for android 5.0 (lollipop)?

    Hello, and Welcome to the HP Support Community!
    Unfortunately, HP does not advertise the exact dates updates will occur. 
    When they are ready, they will be pushed to your device OTA (Over The Air).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • New screen for HP Slate 7 Extreme

    Hi all
    Does anyone know where I can get a replacement screen or fix my screen on my HP Slate 7 Extreme as it is cracked.
    Thanx 
    This question was solved.
    View Solution.

    Hi,
    Last night, I did a search and only find on eBay and its cost is over $70, just for a basic screen. Given you have to pay for labour/labor cost on the top, I don't think this is the wise choice. Buy a new unit.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hp slate 7 extreme windows install

    Wow!  Thanks for that link! That is bizarre indeed. On further viewing, I think this site just lists devices that can interface with Windows PC's... WyreNut

    Hi Wyrenut, thanks for your reply! I know this sounds stupid, but I'm not exactly sure how yet. I looked at the windows compatibility site and the hp slate 7 was listed as compatible so I've been trying to search the net for a way but so far it seems you're right, it is impossible ;-; http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=hp%2Bslate%2B7%2B&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  • 1415 fnw printer wireless connection extremely slow or not working with OS X, works with windows

    The wireless connection to the printer is either extremely slow or not working at all on OS X Yosemite.  It shows up in the list of printers in Bonjour in Safari, and I can connect to parts of the web interface if I wait a very long time.  However, I cannot add the printer as a new printer in System Preferences even though the printer shows up.
    I have upgraded to the latest firmware.  The WiFi indicator on the printer is on, "green", and it has a reserved IP showing up in my router (ComCast).  It seems that Windows machines can printer to the printer wirelessly without a problem.
    Any help appreciated.
    Stephen
    This question was solved.
    View Solution.

    Hello @sscotti,
    I would like to assist you today with installing your wireless HP LaserJet Pro CM1415fnw Color Multifunction Printer on your Mac OS X 10.10 Computer. Now you indicate in your post that this printer works fine with Windows computers, and you are able to 'see' the Bonjour printer on your Mac. Therefore, the issue that you are experiencing is not network related. Rather, I do believe that you are experiencing a driver conflict on your Mac OS X 10.10 computer. Can I please have you run the steps below to resolve this issue.
    Step 1: Uninstall Drivers and Software:
    First, I'm going to have you 'clean up' your Mac OS X 10.10 computer to verify that any trace of your Laserjet printer is gone so we have a nice clean slate to work with. Please click here and when the website opens select the drop down for 'Mac OS X v10.6, OS X v10.7, OS X v10.8, and OS X v10.9' as the steps are the same for Mac OS X 10.10. Run the appropriate uninstall steps for the method in which you originally tried to install your printer: Apple Updates, or the HP Driver download.
    Once the uninstall is complete, please proceed to the next step.
    Step 2: Verify and Repair your Disk Permissions on the Mac:
    Open Macintosh HD and go to Applications
    Go to the Utilities Folder
    Open the Disk Utility
    Select the Hard Drive volume you are using (usually on the left)
    Select Verify Disk Permissions
    Once that process is done, select Repair Disk Permissions
    Step 3: Check for Apple Updates:
    Go to Apple
    Select System Preferences
    Select Software Update
    Click Update Now
    Install your available updates
    Restart your computer
    Step 4: Reinstall your Software and Drivers:
    Please click here to download the appropriate Mac OS X 10.10 drivers for your HP Laserjet printer. 
    Once the website opens select the 'download' button on the top left
    Once the download has completed, please follow the onscreen steps to reinstall your printer.
    Once the reinstall is complete, test the print and scan functions to ensure that your printer is functioning as per normal.
    Please respond to this post with the result of your troubleshooting. Should you still be experiencing issues there are additional steps I can have you run through. I look forward to hearing from you. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Include the Model # of your Slate tablet in your question!

    With the debut of many new tablets from HP, there are now varying models of "Slates" with different specifications.
    For example, we now have the HP 7 1800, Slate 7 28xx/46xx, Slate 7 Plus 42xx, Slate 7 HD, and the Slate 7 Extreme 44xx!
    The Slate 8 Pro, Slate 10 HD, and Slate 21 have also arrived.
    These devices have different options, and some have different reset procedures.
    BE SURE when you make a post in this section that you include the Model number of your device.  If you are unsure of the model you possess, the information can be found here:  
    Settings App/ About tablet/ Model number
    Generic questions like "My Slate has a problem"  will cause a delay in getting a proper answer until we determine exactly which tablet you are asking about.
    Help us Help you!  
    WyreNut (and the entire HP Expert Team)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

    hi jacinthe117, to address the issue that the plugincheck page is never finishing to load, please try to go to the firefox'' menu ≡ > addons > plugins'' & set the "java deployment toolkit" from ask to activate to '''never activate''' and then reload the plugin check page...
    [[Firefox hangs or is not responding - How to fix]]

  • Can't connect to MacBook with Airport Extreme

    I just swapped Airport Extreme base with new Airport Extreme 8012.N and now my Macbook can't connect to internet, keeps cutting out and dropping off. I have an iMac G5 connected via ethernet to Airport Extreme and Macbook in living room. It was working fine with old Airport Extreme router. I also have an Apple Express (not new 8012.N ) but it just blinks orange when plugged in. Any help would be appreciated.

    You have to power down everything to start with. Make a clean slate so to speak.
    I switched from an older Air Port Express to the new Extreme. Run the new software and when you power back up the new base station should show in the window. Follow the steps. It made me feel stupid the 1st time through and I had to do it again. You have to take your bent paperclip and reset.
    After I got the new base station up and running I took the old Express and used it for Airtunes. At first it just blinked and wouldn't show up on the list of devices. I had to do the paperclip thing. And there it was! Green light! Follow the steps for Airtunes. Then I had to reconfigure my settings for my HP 3300 series wireless printer. That wasn't so bad, it all worked.
    The machines all work well; we all just need pay close attention to the instructions.
    I think that the Apple on line instructions could be a bit more clear. It all worked as it was supposed to but it was certainly a trial and error process.

  • Miix 2 WLAN extrem langsam

    Hallo,
    ich hoffe ich kann hier auch auf deutsch schreiben...
    Mein Miix2 10" Tablet hat eine extrem schlechte WLAN Performance.
    Download-Geschwindigkeit (Inerhalb des LANs, nicht Internet) liegt permanent deutlich unter 1000KBit/s. Zusätzlich bleibt es immer wieder mehrere Sekunden komplett stehen.
    Der Adapter zeigt eine Geschwindigkeit zwischen 78 - 100 MBit an. Empfang ist immer super. (Tablet nur ein paar Meter vom Router entfernt)
    siehe Screenshot: http://up.picr.de/20540111dl.jpg
    Treiber für den WLAN Adapter habe ich von der Lenovo Seite.
    BIOS Update ebenfalls durchgeführt.
    Was kann ich tun?
    Grüße,
     Tex

    We do not speak German in this forum. Choose your language (i.e. Deutsch) forum by selecting from the combo box at the top right corner of this page beside "support in other languages" and then navigable to the section "IdeaPad/IdeaTab Slate Tablets" and post your question there. Thanks!

  • Ibook G4 airport extreme wont connect to WPA2 personal need help

    ok so I just reformatted my brother I-book G4 and started with a clean slate, 10.3.9 OSX I am trying to connect the airport extreme that is in the computer to the linksys network I have set up. I have a Imac with an intel processor and a powerbook g4 titainium the Imac is using the internal wireless that it came with and the powerbook is using a linksys wireless card through the slot on the side.
    I am using WPA2 personal on the network and both of these computers connect just fine through the password. the I book will not allow me to even bring up WPA2 personal as an option. it recognizes the network and I can click it but will not except the password because the only option is WEP of different types. how do I get around this and get it on the network?
    I bought a external USB wireless card for it but it wont even recognize that either.
    also the computer will not boot up with the airport card taken out of the computer which I found very odd. what is up with that?

    Copied from apple's support:
    To set up a WPA2 Personal network:
    1. Open AirPort Utility, located in the Utilities folder in the Applications folder on a Mac, and in Start > All Programs > AirPort on a computer using Windows.
    2. Select your base station, and then choose Manual Setup from the Base Station menu. Enter the base station password if necessary.
    3. Click AirPort in the toolbar, and then click Wireless.
    4. Choose WPA/WPA2 Personal from the Wireless Security pop-up menu if you want computers compatible with WPA and WPA2 to join your network. Choose WPA2 Personal if you want only computers compatible with WPA2 to join your network.
    5. Enter an ASCII password of 8 to 63 ASCII characters.

  • HP Slate HD With 2 year Data

    The HP Slate 7-HD I bought in May 2014 frequently freezes and it also overheats when it is being charged. I am concerned that it could become a fire hazard. As a result the back of the device gets extremely hot and has recently developed two hairline cracks which are getting worse. I still have another year of data to use on the device. I would like this fault investigated and the cracks repaired if possible. I bought it directly from your HP UK store website.

    Hey , Welcome to the HP forums. The forum support team is not associated with servicing and warranty departments. These are strictly handled by phone. Click the following link to get the support number for your region: Phone Assist Worldwide. If you are in North America visit our Contact page here. Fill out your product info and select your product. Fill out the form at the bottom of the page and when submitted it will give you a case number and phone number to call.
    Thanks.

  • Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

    Hi !
    I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
    I can ingest audio with video using log and capture, then I know my card and my cables are working.
    I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
    I've been looking on the BM website, but I found nothing.
    Can you help me ?
    Thx

    Thanks for the reply.
    Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

  • How do I use my airport extreme with my FIOS router?

    How do I use my AirPort Extreme base station with my FIOS Router to extend my network?  I have hard disks connected to my AirPort Extreme and would lik to access them.

    Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

  • New Airport Extreme restarts/disconnects/boots all devices if specific MacBook joins wirelessly...?

    Preface:
    This is my second new AEBS in two weeks. They've both had this issue (which seems unique from the other disconnect postings I've found), so it's not AEBS hardware. I've also had a perfectly functioning Airport Express in the exact same configuration (sans dual-band of course) for the last two years, so interference and the like (for which I did test and troubleshoot) also seems unlikely. I have a 2008 Macbook, a mid 2009 Macbook Pro, a Windows 7 PC, an iPhone 4, and iPhone 4s, and an iPad on the network.
    Issue:
    After setting up my AEBS, I kept getting knocked off at random, frequent intervals. It would disappear from all my devices simultaneously--no network connections and nothing showing in Airport Utility. I tweaked every setting imaginable five times over. No luck. Looked into networks around me and fiddled with channels etc. No luck. At first, I would have to go unplug and replug the AEBS to get it to show back up. Eventually I managed to get it to where it would just "reset" more or less and come back on in about 30-45 seconds. The light on the router will blink green once, and then two seconds later go solid amber for about 10-15 seconds, and then blink amber for another 10 or so. Then it's back like nothing happened.
    I think that I finally narrowed it down today to what is triggering it more or less. I noticed it was fine with everything connected WITHOUT any security. When I added the WPA2 security back on, it was doing it soon after the older Macbook connected, right after "Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5". I could connect the Macbook through ethernet and be fine. If it did connect without the issue, it would do it soon after when the router would run that "Installed unicast CCMP" process again in a mere matter of minutes.
    I decided that maybe having old OSX Leopard wasn't working well, so I finally upgraded it to Snow Leopard to see if maybe it would help. No luck. Exact same issue. I disabled Airport on it, and since then I'm going on 5 hours of no issues, but why is this computer causing the AEBS to freak out when it worked 100% with my Airport Express for years???
    Here's a sample log, starting from one reset to a disconnect:
    Dec 07 11:39:30          Severity:5          Initialized (firmware 7.6).
    Dec 07 11:39:37          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Dec 07 11:39:37          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Dec 07 11:39:37          Severity:5          Rotated CCMP group key.
    Dec 07 11:39:38          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Dec 07 11:39:38          Severity:5          Rotated CCMP group key.
    Dec 07 11:39:41          Severity:5          Associated with station 00:1b:63:00:46:94
    Dec 07 11:39:41          Severity:5          Installed unicast CCMP key for supplicant 00:1b:63:00:46:94
    Dec 07 11:39:41          Severity:5          Internet configuration leased [IPv4] -- host <76.183.234.251/255.255.252.0> gateway <76.183.232.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43199> domain <tx.rr.com>
    Dec 07 11:39:42          Severity:5          Clock synchronized to network time server time.apple.com (adjusted +1 seconds).
    Dec 07 11:39:43          Severity:5          (WAN) link state is Up.
    Dec 07 11:39:43          Severity:5          Internet configuration leased [IPv4] -- host <76.183.234.251/255.255.252.0> gateway <76.183.232.1> dns <209.18.47.61 209.18.47.62> wins <> lease <43197> domain <tx.rr.com>
    Dec 07 11:39:48          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60946.
    Dec 07 11:39:49          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60947.
    Dec 07 11:39:57          Severity:5          Associated with station 3c:d0:f8:8e:31:b5
    Dec 07 11:39:57          Severity:5          Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5
    Dec 07 11:39:58          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60949.
    Dec 07 11:39:59          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60950.
    Dec 07 11:39:59          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60951.
    Dec 07 11:40:14          Severity:5          Associated with station 00:18:e7:83:45:ed
    Dec 07 11:40:14          Severity:5          Installed unicast CCMP key for supplicant 00:18:e7:83:45:ed
    Dec 07 11:40:29          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Dec 07 11:40:29          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Dec 07 11:40:35          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60954.
    Dec 07 11:40:35          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60955.
    Dec 07 11:40:36          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60956.
    Dec 07 11:40:44          Severity:5          Associated with station a4:67:06:60:67:41
    Dec 07 11:40:44          Severity:5          Associated with station 00:26:bb:00:cc:a2
    Dec 07 11:40:49          Severity:5          Associated with station 3c:d0:f8:8e:31:b5
    Dec 07 11:42:14          Severity:5          Associated with station 00:1b:63:00:46:94
    Dec 07 11:43:39          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 3).
    Dec 07 11:43:39          Severity:5          Deauthenticating with station ff:ff:ff:ff:ff:ff (reserved 2).
    Dec 07 11:43:39          Severity:5          Rotated CCMP group key.
    Dec 07 11:43:41          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60962.
    Dec 07 11:43:45          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60964.
    Dec 07 11:43:45          Severity:5          Connection accepted from [fe80::226:4aff:fe10:2c66%bridge0]:60963.
    Dec 07 11:43:48          Severity:5          Associated with station 00:18:e7:83:45:ed
    Dec 07 11:43:48          Severity:5          Installed unicast CCMP key for supplicant 00:18:e7:83:45:ed
    Dec 07 11:44:24          Severity:5          Associated with station 00:26:bb:00:cc:a2
    Dec 07 11:44:24          Severity:5          Installed unicast CCMP key for supplicant 00:26:bb:00:cc:a2
    Dec 07 11:44:40          Severity:5          Associated with station 3c:d0:f8:8e:31:b5
    Dec 07 11:44:40          Severity:5          Installed unicast CCMP key for supplicant 3c:d0:f8:8e:31:b5

    Hi,
    I have roughly the same issue.  I have a new 5th Generation (I had a 4th Generation that seemed to do the same thing) that will reboot for no apparant reason.  I have a 1st Generation Time Capsule as the main wireless access point, then a 2nd generation Extreme extending, and the 5th generation as another extension.  I also have an Express extending to the top floor.  All my other devices work great, but the new 5th generation will just reboot over and over.  Seems to be every 5 - 10 minutes.  I have it setup in the middle of my house, with some devices connected to it via ethernet cable.  I used to have the Express in that location connected to a switch for my devices, and never had any issues.  My log looks similar, basically nothing useful. 

  • Help setting up Open DNS with new airport extreme

    I cant seem to get Open DNS to work with a new airport extreme. The status says I am not using Open DNS and its not filtering anything. I have followed the exact steps for set up listed on their website, checked the dns settings, cleared both caches and restarted the computer, modem and router with no success. I set the airport up in bridged mode, although I tried the other option under setup, but not sure what I was doing? I picked up this router because I wanted easy set up and the apple store assured me it would work with Open DNS. Oh, and I also downloaded the latest firmware update on the router. Can anyone help me with the settings or what else I need to check?

    Sorry, I am not familiar with this product, so I checked online to pick up some information.  Here I am referring to the information found here:
    http://www.dslreports.com/faq/6096
    I found that your device is mentioned as follows in the intro under Section 1 of this document:
    The BellSouth supplied Westell 2100, 2200 and 6100 models (Models A90-210030-04, B90-220030-04, and B90-610030-06/C90-610030-06, respectively) share many features and functions.
    Next, I am referring to the information under Section 2, under the heading of Standard Default Mode Connection (separate hub or switch present).  Unless you have changed the configuration on the Westell, this is how your device is operating. In this mode, the Westell device is acting both as a modem and router in one unit.
    So, an attached router (AirPort Extreme) must be configured as a switch to work correctly. That is what Bridge Mode is....the AirPort Extreme is operating as a switch when it is in Bridge Mode (which would be the correct setting to use when the Westell is set to its Standard Default Mode).
    Any changes that you want to make regarding DNS settings would need to be made on the Westell device, since it is acting as the main router on your network.
    In Bridge Mode, the AirPort Extreme simply passes that information through to its connected devices. You will not be able to make any DNS related changes on the AirPort Extreme since it receives that info from the Westel device. Some service providers force you to use their DNS servers, so you might want to check with Bell South or AT&T for more information in this regard.
    If you want to be able to configure the AirPort Extreme as the main router on your network, and instruct it to use the DNS information that you want, you will need to refer to the section under the heading of Bridged Ethernet Mode ( separate router present).
    Please note that the first item under this heading specifies that "This is the preferred configuration when using a separate external router..." (which would be the AirPort Extreme in your case)
    So, it appears to me that this would be the way that you must reconfigure the Westell device to allow the AirPort Extreme to function as the "main" router on your network. In this type of setup, you will be able to enter the DNS information that you want to use under the setup for the AirPort Extreme and it will act as you instruct.
    The AirPort Extreme would not be configured in Bridge Mode for this....it would be configured to "Share a public IP address".
    The next item in the article specifies that you "Must use a PPPoE client on the Router." This means that the AirPort Extreme would be configured to Connect Using = PPPoE as follows:
    AirPort Utility - Manual Setup
    Click the Internet icon
    Click the Internet Connection tab
    Connect Using = PPPoE
    You would enter your user name (probably your email address), password, etc in this area. Leave the Service Area box completely blank. Set Connection to Always On, and Disconnect if Idle to Never
    Click Update to save the new settings. Power off the Westell device after this and then restart it so that it will pick up the new information that you have programmed into the AirPort Extreme.
    I want to stress that this is how I would try to configure the Westell and AirPort Extreme. But, as I said, have not used a Westell device, so I cannot say that this will work correctly for you.
    It might be an excellent idea to contact Bell South or AT&T Support to ask for their opinion on this before you decide to change the configuration of the Westel device and the AirPort Extreme.
    This type of thing can be intimidating for users, so you might elect to use the services of someone like the Geek Squad at Best Buy, or a similar service from a local computer firm. Perhaps the Apple store could help as well.
    If it is not critical that you use Open DNS, you might want to simply leave things "as is", with the AirPort Extreme in Bridge Mode.

Maybe you are looking for