HP slate will not recognise sd card

Please add me to the growing list of unhappy HP slate owners who have lost ability to use the sd card, since updating last week.
Really poor customer service.

Hi!, Jrr19: Welcome, to Forum !. If you have any device with SO Android 4.4.x KitKat, you didn't see the microSD. Wait for response by HP, in patch of ROM image.

Similar Messages

PowerMac G4 OS 10.4.11 will not recognise RAW images on a SDHC card but it will see JPGs why?

Question:
I have a PowerMac G4 OS10.4.11. I have recently bought a Lumix LX5 camera and it uses an SDHC card. My Mac will not recognise RAW image files stored on it either by plugging the camera into a USB slot or by using a USB card reader. Can anyone tell me how to overcome this problem?

Thanks for that,
I downloaded RPP and it does indeed open the RAW files and lets me convert them into TIFFs or JPGs which I can then import into Photoshop to play with. However I'm still confused about why I can't open them in Photoshop directly. My other camera is a SLR saving to a SanDisk Extreme lll Compact Flash card and I can open RAW files off that on the same computer with no problem using a Photoshop RAW converter plug-in.

Equium M50 will not recognise the LAN port - error: Network Cable unplugged

I own a Toshiba Equium M50 and have problems with the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller.
I used to connect via an 'ADDON' Modem/ADSL Switch and had no problems. I then replaced the ADDON with a 'NETGEAR' DG834G ADSL Modem/Router to gain the wireless port, and since then my machine will not recognise the LAN port. <error: Network Cable unplugged>.
I know that the cables are OK as I used them with other laptops and had no trouble. I can also plug in a PCI card to connect without any problems. It looks to me as if the Marvell Yukon 88E8036 PCI-E Fast Ethernet Controller has a problem with the netgear Modem/Router.
Anyone out there with a similar experience and some advice/suggestions?
PLEASE

Hi
For me it doesnt show like a LAN card problem but your router is a problem.
Check the device manager if the LAN card was properly recognized. If there are no yellow exclamation marks so everything is ok!
You can try to delete the LAN card from the device manager and after new reboot install the LAN driver again.
The issue has stared after installing or connecting the new Netgear modem router.
Therefore I would recommend to checking firstly the settings or to update the firmware on this router.
I have found additionally these useful websites
http://compnetworking.about.com/od/windowsnetworking/f/cableunplugged.htm
http://www.experts-exchange.com/Networking/Broadband/DSL_Cable/Q_20381405.html

PC will not recognise Ipod-have tried everything!

I have brand new 4gp ipod mini. Uploaded software-when it said to connect ipod I did. when it got to the screen on the uploding wizard thingie that asked about formatting the ipod the "next" button was not highlighted, so with no other option, I ticked the "tick here if you want to install software without ipod connected" and carried on.
PC will not recognise ipod as either a piece of hardware or in itunes.
It is connect via a USB 2 port which is on a USB 2 card. The ipod does charge so that bit is working. The PC is about 4 years old and has Windows XP.
When i plug into an old USB 1 port the PC recongises the ipod, but says the port cannot support it (assume as it is too slow)
I have tried the following things
1. remove all ipod/itunes software and restore-using both the software downloads from apple site as well as the software which came with ipod
2. resetting it
3. putting it in disco format when plugged into PC.
Plse can someone tell me what I shoudl try next? I have looked through all the discussion threads and apple site and cannto see anything that seeems to fit this problem. I am assuming it is related to the USB.....but could be very wrong!
thanks
Chantal

Hi,
I have EXACTLY the same problem, my computer is even the same age as yours! I re-installed etc etc, I downloaded XP service pack 2, I have a 4GB ipod mini, I reset it and reset it again, I phoned Apple support, not a lot of help considering they told me to doexactly what I had been doing already, told me to try on another computer and like you I don't have any other to try on, I tried other devices in the USB 2 port (also a PCI card like yours) and they work fine, and the ipod charges. I went back to the Apple store to swap it for another one and the guy there said that it sounds as though my computer is only recognising the ipod as a external hard drive instead of a music player. When I plug it in I get a little bubble saying found new hardware mass storage device, and then anopther bubble says there was a problem installing hardware and the device may not work corretly (which clearly it doesn't!). So he told me to find smeone who is really good with windows (where....?) to sort out my computer so that it recognises it as an ipod and not an external hard drive, aparently there is a way to do this. I do have someone coming to check it oput tonight, if they can solve the problem then I will let you know how they do it!
Sorry can't be any more help but I suppose it's good to know there's someone else in the same situation!!!!

Not recognising USB card reader and also PhotoBooth issue

Hi,
I'm a new member and a bit of a numpty when it comes to Mac (new owner).
My Macbook Pro is giving me some grief tonight and I have 2 separate (i think) issues.
It will not recognise my USB card reader. It worked fine last week and I did eject it properly before removing it. I've tried the card reader on a PC and it is working fine....
Also when I go to open Photo Booth it tells me that my camera is not connected or in use by another program. But as you know the camera is built in!?!?!
I'd be very grateful for any thoughts on how I might fix the problems. The nearest Mac store is 2 hours away....
Many thanks in advance

bigredpaws, welcome to Apple Discussions.
Look at
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151?viewlocale=en_US
Common fixes for USB device issues (unrecognized, etc.)
http://www.macfixit.com/article.php?story=20070824012114701
 Cheers, Tom

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

I recently connected my new ipad to my itunes, but now itunes will not recognise my ipod classic, and 50gig of music has gone. ipad connects ok but no longer ipod which has been there for two years! help!!!

What happens when the iPod is plugged in? anything? any errors?
Why is 50GB of music gone? All music should exist on the computer. Only a fool would rely on a single device which could easily be lost or stolen to store their content on.

I have attempted to upgrade os4 to os7. icloud has taken an old expiered email address for which i do not know the password. It will not recognise my current email and password with itunes. Any help appreciated

I have attempted to upgrade os4 to os7. At the end, it threw an error that i had to turn off "Find my iphone" on my phone, which seems to be impossible at that stage as i could not access beyond the upgrade screen.
I thin chose to set up as new iphone, but icloud has taken an old expired email address for which i do not know the password. icloud will not recognise my current itunes email and password, so i now have os7 but am unable to restore from my itunes back up.
Desperately need help please... Any help appreciated
Thankyou

If you don't know your password, don't know your security questions and don't have a rescue address or don't receive a reset email, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
If you are in a region that doesn't have international telephone support try contacting Apple through iTunes Store Support.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

Itunes will not recognise music on my ipod?

I have recently encoutnered a problem with my 5th generation 60gb ipod which I'm hoping someone can help me with?
When I plug my ipod into my computer and open itunes, it recognises that the ipod is plugged in, but asks me to set-up the ipod, like it is the first time I have used this ipod. Also it does not recognise any of the 5,000 or so songs on the ipod.
When my ipod is not plugged into my computer all 5,000 songs still appear on it and play with no problems.
For some reason itunes will not recognise the songs on my ipod - even though I have added them all with this software and about a third of them on this computer.
If I choose to proceed with the set-up of my ipod, I am afriad I will lose all 5,000 songs off my ipod.
Can anyone offer a suggestion - as it is, I either wipe my ipod or concede that I can't add any more songs to it, even though it is only half full.
Oh yeah, I have added all files to my ipod manually.
Thanks!

When I plug my ipod into my computer and open itunes, it recognises that the ipod is plugged in, but asks me to set-up the ipod, like it is the first time I have used this ipod. Also it does not recognise any of the 5,000 or so songs on the ipod.
With those symptoms, it's probably worth checking to see if you're getting a Windows drive letter confusion. For troubleshooting advice on that, see the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

My itunes is running really slow and will not recognise any of the 2 iphones 1 "3g" and 1 "4" or my ipod touch ?

my itunes is running very very slow the rest of my pc is fine.
i tunes will not recognise either of my iphones "3gs,4, nor my ipod touch4".
i have uninstalled all apple software and re installed itunes .
i have checked my iphone at a retail store and it was found.
i have the latest version of ie "ie9" and itunes "10.2.2.12".
any ideas what to do ?

Hi Grant, Thanks for the response, much appreciated.
I agree that it should not really run slow however I would really like to upgrade to Lion anyway and thought that doing it via the SSD route would be good way to do it as the SSD should help speed things up once I sort out the underlying issue at present. I also wanted to try and load lion but still have Snow Leopard available on the original drive for the time being till I knew that eveything was working well using Lion but I'm not sure if this is possible and how to do to this.
I have just clicked on 'Verify disk' on HD1 in the utility menu and there is a problem there. It is asking for me to start using another disk such as the mac installation disc but I am not sure where I have put this. Seeing as I have upgraded to SL would this now be the new installation disc and if so, do I just put the disc in the machine and restart?
Thanks for your help

Windows 7 installation will not recognise the Bootcamp disc!

I have a 2008 Macbook running Snow leopard.
Installed Win 7 via bootcamp but when I insert the Mac Snow Leopard disc to install the Bootcamp drivers etc after the Win 7 install has succeeded, the Windows 7 installation will not recognise the disc!
Any ideas
Thanks in advance

If you used your Leopard DVD then it won't work.
As ScuseMe said only the OSX Snow Leopard DVD contains the drivers for Windows 7.
Stefan

Bridge and Photoshop CS4 will not recognise the images shot in NEF file

Shot in Nikon D810 with NEF file but the images will not recognise with Bridge and Photo
shop CS4

That camera was recently supported for the first time by ACR 8.6, which needs at least CS6 to run. You will never be able to open those raw NEF files in CS4, as there will never be an update for CS4.
Your choices are to upgrade, or to use the free, stand-alone Adobe DNG Converter 8.6 on each and every batch of raw NEF files in order to convert them to raw DNGs that you can open in CS4.
Mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.6
Windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.6

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

MacBook Pro 10.6.8 My @me account has been wiped of all mail, will not send or receive and iCal will not recognise user name or password even though i haven't changed it. All this after a scheduled software update. Any ideas??

kwmlr439 wrote:
CSOUND Read the title please:
Re: Macbook Pro 10.6.8 RAM Upgarde to 8 GB
The amount of RAM is not dependant on the operating system. It is all about the model of you Mac.
10.6.8 is the version of OS X that is installed on your system. It has no real baring on the amount of RAM that CAN be installed.
Personally I have never had good luck with Corsair RAM. I have always had good luck with Crucial and Kingston.
Message was edited by: Shootist007
Message was edited by: Shootist007

HT4972 my computer will not recognise my iphone after installing the latest version of itunes any ideas how to rectify this

my computer will not recognise my iphone after installing the latest version of itunes any ideas how to fix this

iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X - http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows - http://support.apple.com/kb/TS1538

Mac Book Pro/iTunes will not recognise content of freshly burned cd

Hi
So...my drive will recognise bought dvds and burned dvds. It will also recognise the content of shop bought cd. I can also burn cds and dvds. HOWEVER, it will not recognise cds burnt for me from other peoples (apple) machines. It simply says that the cd is blank. This is the same whether the cd is an mp3 cd, an audio cd or a datadisc. I have also tried to open the cd's in Quicktime and VLC but it still will not recognise.
Can anyone help m with this one? Do I just need to get a lens cleaner and if so are lens cleaners that you insert into the machine safe to use ?

So...
It would appear that now:
I cant burn dvds using toast or dvd studio pro.I can however play burnt dvds.
I cant play burnt cd's using itunes or quicktime but I can burn cds using iTunes.
Im so puzzled that any help would be brilliant.thank you.

HP slate will not recognise sd card

Similar Messages

Maybe you are looking for