HP Smart Print will not install. OS - Windows XP, Printer HP Officejet J4580

Downloaded HP Smart Print for Windows XP . Got an error window "Could not Install"
Wht do I do to fix it ?

What verison of IE are you running? It works for versions 6 through 9. Also, minimum system requirements for  this program is SP3 on the XP OS.   Here is a link to smart web printing page.  http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&​dlc=en&cc=us&docname=c01812475#N51
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Similar Messages

  • Hp officejet pro 8610e driver will not install in windows 8.1

    the Hp drivers will not install from disc or online download.

    Hi @aggie62,
    Welcome to the HP Forums!
    I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
    A few questions for starters:
    What happens when you try to install the driver?
    Do you see any error messages?
    How is your printer connected? Wireless, Ethernet, or USB?
    Are you able to make copies with your printer?
    In the meantime, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Re-install using the HP Printer Install Wizard for Windows .
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

    CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

    Old_Timer I would recommend reviewing your install logs to determine the exact error message.  You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Itunes will not install on windows 7 home

    Any one had this issue
    Itunes will not install on windows 7 home

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • ICloud Control Panel 2.1 will not install on Windows 7 x64

    iCloud Control Panel 2.1 will not install on Windows 7 x64. If I try the to run the install from the Apple Software Updater it the iCloud 2.1 crashes and I get a message that suggests I do a download only  and they run it locally. I do that and the install i.e. the exe file just seems to never start even if I try to "Run as Admin"
    I go int o task manager and there is no instance of the install running.
    What is the issue/work around to this?
    Thx to all for help.
    Michael

    I didn't try creating a new user profile. Not sure I completely understand what you're suggesting. I dont't want a new/different profile. I just want to be able to install the update.

  • ITunes 11.1.4 will not install properly - windows 8.1, 64 bit.  My only way to recover is to restore my system.  iTunes 11.1.3.8 functions properly.  When will Apply provide a workable update?

    iTunes 11.1.4 will not install properly - windows 8.1, 64 bit.  The only way I have found to recover is to restore my system.  I have unistalled/reintalled iTunes two times.  No success.  iTunes 11.1.3.8 functions properly (following system restore).  When is Apply expected to provide a workable update?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • WebCam Notebook will not install in Windows 7

    Webcam Notbook will not install in Windows 7 and I can not find the drivers for the camara so i can install it .

    Hi Csper22923,
    Sorry but it doesn't seems like the WebCam Notebook is listed in the driver availablilty chart. There is probably no further driver development plans for it.

  • MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

    MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7  in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
    Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
    Any ideas on how to get this product installed in Windows 7 ?

    I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
    1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
    2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
    Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well.  Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
    TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

  • Hp Laserjet 8150n will not install on windows xp

    computer went to the shop and operating system was replaced and now my printer will not reinstall.
    windows xp and a hp laserjet 8150n printer.
    printer is on the network and recognized by 3 other computers.
    cabled network
    loaded printer software to 64 % and then comes up with an error saying restart the computer and try again
    each time I try to install the printer.
    the wizard finds the printer but can never complete the installation.

    Hi jnjgoss, 
    This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links. 
    http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support 
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413 
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Photosmart C7250 will not install with Windows 7

    I have bought a new computer wth Windows 7.  My Photosmart C7250 will not install on this operating system wirelessly or by USB.  The driver will install so that I can print only when I plug it in, but I cannot achieve full functionality.  When I try to install it over the wireless network,, it gives me a fatal error (code 14116417).  The printer does connect to the wireless network, though.  I have uninstalled and reinstalled numerous times, and have run out of options.  Any ideas, besides buying new???  I really like this printer!!!  And thank you in advance!

    I is likely not your printer.  Here are a couple of things to check:
    1. Disable your security system's firewall.
    2. Reboot your router and try again.
    Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Deskjet 1512 Printer will not install....

    Hi
    I have a Deskjet 1512 "All in one" printer.
    I have followed the setup and installation instructions down to the last comma- and still some 6.5 hours later- I still have a new printer that does not work.
    I am running Windows XP / Service Pack 3 / Dotnet 3.5
    I ran the installation disk (provided), made a cup of tea, ticked the boxes, answered the questions.
    When prompted (and only when prompted) - connected my Printer and USB lead to the computer... that's where the issues began.
    The "Full Feature" whistles and bells software began to try  and detect my device.
    It was beaten to it by Windows Harward "Wizard" - telling me it had detected a new device....but it could not be installed "Due to a missing Module".
    About 2 seconds later - the HP "Full Feature" software spits out it's dummy and tells me to connect my printer and check the USB lead......
    So- I replaced ther USB lead with 4 different ones I have spare, as well as try all the various USB ports on my computer.
    Still the same issue.
    However-
    The Scanner had installed- and works fine.
    So I attempted a forced "Backdoor" installation of the printer drivers- via Windows Hardware Manager.
    This all looked so promising- the Drivers finally looked as if they were installing.
    At 99%, the Hardware Manager pop-up informed me that my "device had been install successfully"....
    About 1 second later- another pop-up appears- now telling me that it wasn't possible to "complete an action"? and that my "device was not installed".
    A brief flick through driver manager showed me that my scanner was installed, but the Printer wasn't.
    I completely uninstalled the HP software, and then Dot Net.... cleaned all Temp files, and removed all rogeu Registry Entries.
    Then Restarted my computer (after checking that USB 2 was enabled in the Bios- which it was)
    I then re-installed the upto date Dot Net (downloaded via HP website), and the Up to date "Full Feature" software (also courtesy of the HP website).....and.....
    ......still the same.
    In short- I have tried:
    Removing all previous installations of the HP software and Dot Net 3.5
    Reinstalling all of the above
    4 x Different USB leads
    All the different USB ports on my PC
    Swearing and Cursing (usually works with Microsoft Products only)
    The only thing I have NOT tried, is Witch Craft and Country Dancing.
    Any further suggestions would be much appreciated......
    This question was solved.
    View Solution.

    Hi again
    As I have pointed out in my previous postings-
    I have updated my version of XP, it's service Packs and also the version of DotNet- which I downloaded from this forum, and have double checked that it is the most up to date- which it is.
    I have tried to "Copy" documents on the printer, and it does not do anything.
    A warning light (beside the X button) flashes Orange.
    I then tried to scan the document as a JPEG image- and that worked fine, it scanned, and saved with no problem whatsover.
    I have tried (about 8 times now), the "Device Setup Failed to Complete" - and that pretty much states the obvious things to check when something doesn't work- the same things I have been checking for the last 6 or so days.
    The Issue, is something with the software, as the drivers will not install to be able to operate the device correctly- despite attempting Various Uninstalls, Re-installs and manual installs.
    In simple terms, installing the driver manually is fine; until it gets to the last stage- and then it stops and windows (kindly) informs me that "My printer was not installed as their was a problem".....it won't state what problem.
    By using the HP installer; you go through the processes, and when asked to connect the printer, the HP software doesn't detect it, (though the XP Device Manager does).
    I have tried so far:
    The Troubleshooting guide (as mentioned above, just seems to state the obvious)
    8 Different USB leads of differing lengths.
    All 6 of the USB ports on my computer- which otherwise work with other devices.
    Un-installing the HP software, cleaning all traces from TEMP files and the Registry, restarting my computer and re-installing.
    Manually installing the Printer using Windows Hardware Manager
    Copying a document on the Printer - that doesn't work.
    Scanning a Document on the Printer (That DOES work)
    Ensuring that my version of Windows XP is up to date.
    I have the latest version of Dot Not installed- which I have.
    Installing "Next Driver down"- which does install the device, but it won't print.
    I have been Unable to try another machine as yet, as I don't have another available.
    But that I think is my next port of call.
    Thanks for your help on this.

  • Itune will not install on windows 7

    I had to do a full restore on my HP laptop and now Itunes will not install I am running Windows 7

    Do you get an error message when you try to install iTunes? If so, what does it say? (Precise text, please.)

  • Thunderbird will not install on Windows 8.1

    T-Bird & Firefox were running fine under Win 8.1 then would not upgrade. Only option was to try a new install. Now neither program will install. I did see a comment in the forum about making sure the the process: AeLookupSvc needs to be running which it is
    Cleaned the Reg with CC Cleaner and also checked using Reg Edit. Still will not install.
    The process started I added screen capture, you see it does the extraction process reaches 100% then nothing.
    I'm stumped. Could use any suggestions. Oh I even tried installing a older rev of Thunderbird and Firefox. Same problem.
    Could use some fresh ideas.

    Make sure you have tried the suggestions mentioned here. Troubleshoot installation | Photoshop Elements, Premiere Elements | Windows
    Troubleshoot and fix installation errors
    ~ Arpit

  • Will not install in Windows 7 64 bit

    Downloaded SafariSetup.exe but it will not install. Clicking on it results in message: "The version of this file is not compatible with the version of Windows you are running." I need Safari to run WebKit. Is there a Safari that will run on my computer? OR is there another browser in which to run WebKit?

    Yeah, I think it falls into the same category of problems as "not a valid win32 application", "invalid signature", and "unknown publisher" messages ... usually all of which relate to installers getting damaged on the download.
    At any rate, I'm glad you got things working again.

  • Adobe Flash will not install on Windows 7 x64

    Hello,
    I find myself in a bit of a pickle, which I have neither definitive answer nor logic to why this is happening. Whenever I install Adobe Flash I get an error message in a popup window as described below.
    Host
    Unable to load application configuration
    First of all I thought…? This can happen if the processor clock is out on the motherboard. I rebooted and checked the time and date stamp in the BIOS and it’s correct. Everything else works fine; it’s just Adobe Flash that is causing the problem. I am running Windows 7 x64 and selected Windows 7 x64 when I installed Flash. Shockwave, Air and all other Adobe applications were fine… it’s just Adobe Flash that is causing the problem. Any Answers would be appreciated; I’m left scratching my head with dismay because I cannot for the life of me know what is causing this error message.
    It’s the same for MSIE9 as well it will not install and comes up with the same error message.
    Thanks
    [RESOLVED]
    I took a second look at the BIOS and didn’t spot this the first time I looked. The time was correct, but out by 20 seconds which was the reason why updates and installations were in disarray. I never would have thought 20 seconds would have made much of a difference. But it does and I corrected the time to the precise seconds to pinpoint accuracy, saved the BIOS and loaded the OS and tried again and it worked first time.
    So the moral of this topic is, if you’re getting a message in a window which says the following…
    Host
    Unable to load application configuration
    Check the clock on your BIOS first, if the seconds are out but the time is correct, this the likelihood of the problem is being caused by the BIOS clock.

    What is the exact error you are getting?
    Have you tried to run the offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins tall_in_a_firewall_proxy_server_environment ?
    If that still causes you an error please post your Windows version & edition.
    P.S. if your Windows user account has administrative permissions, then you don't need to go into the BIOS to correct your clock; you can do it from withing Windows, either manually, or using Atomic Clock Sync.

  • Itunes will not install..windows INSTALLER service not available.windows 7

    I am trying to find a fix for this...just bought a new computer with windows 7, all updates have been performed. Itunes will not install...it just stops and says "windows installer service not available" Can't find a stand alone downloadable version of installer 5.0 which is what comes with 7 from the research I have done. I have the newest version of itunes saved on desktop, tried running it from desktop, tried running as admin, tried several other ideas that I found on here and Microsoft..but nothing is working. Any advice?
    Message was edited by: ehindahl

    Same error message "This version is for a 32 bit computer, yours is a 64 bit!"
    Doublechecking ... by any chance did you migrate a 32-bit version of the iTunes, Apple Mobile Device Support and Bonjour programs to the 64-bit machine from a 32-bit machine using the PC Mover utility?
    (Your symptoms are consistent with that ... the installer service throws the message when trying to uninstall the 32-bit itunes and related 32-bit componentry prior to installing the new 64-bit versions.)

Maybe you are looking for