HP Software finds the printer, but then "the printer was unable to be installed over the network"

I have tried to search for a similar issue, but haven't had any success yet. I doubt I'm the first with this problem!
The computer is XP SP3, the printer is Deskjet 3050A, and it's a WPA-PSK WiFi.
The printer confirms that it is connected to the WiFi.
When I run the setup tool on the computer, at the Network Check point, the setup software finds the printer at the correct IP address. It is the only thing it discovers.
I click next, ànd after a minute or two, I get the error "the printer was unable to be installed over the wireless network" Click Retry to try installing the printer over the network again, or click Cancel to return to the connection options.
This just cycles with no progress. I have turned off the Windows Firewall and also disabled the AV. No change.
I can browse to the web interface of the printer - but still can't install the printer. It is listed in the Printers and Faxes as being Offline.
I'll try once again removing it, and re-adding it - but has anyone come across this problem before, please?
This question was solved.
View Solution.

I am having a similar problem as well. The printer is recognized (most of the time) when I run the HP Network DIagnostic Utility. However, when I run the Add a Device setup program to install my wireless printer, it is NEVER recognized. I have even tried to use the advvanced serach to locate it using the IP listed in the Diagnostic Utility without any luck. As an aside, I was able to add the printer through windows just fine and am currently able to print to it, but would really like to add it using the HP installation so that I can configure the "scan to" settings again.
To make matters worse, I no longer have the USB cord that came with the printer because the device has been connected wirelessly for over a year now with minimal issues. Any help getting this brick back online and connected to my network would be much appreciated!

Similar Messages

Software update says I need to do the lastest update which I have tried to do at least 6 times. It downloads the software, the computer restarts, it starts to finish the download and then says ' there was an error in installing the software" What is up?

Software update says I need to download MacOS 10.6.7. Each time I try, I have tried 6 times, the software downloads, it has me restart the system, it then writes the files to disk and then I get an error measage that "there was error in installing the softare. Anybody have this problem and how do you fix it? I am running 10.6.6

Try this before trying to install the update.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If you still have a problem then I suggest you download the 10.6.7 Combo Updater and install it.

I bought a LG slim portable dvd writer. I have gotten it connected, and it seems to have downloaded the drivers but then it turns off and I cannot even get the driver CD to eject because it turns off completely.

I bought an LG Slim Portable DVD writer. I connected it to my MacBook Air and the drivers seemed to download. There is an icon that says SuperMulti on my desktop. The portable drive comes on when I double click on the icon, and I hear the drive running. It turns off about 5 seconds later and I cannot even get the driver disc out because the drive is off (no green light).
I am not savvy. What do I do? It says it is compatible with Mac, but then in another place in the directions it states Windows is needed. Please help an old feeble woman!

You need to contact the DVD writer manufacture/vendor customer support and/or read its user manual. LG is not an Apple product.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode.

How do I find a previously passcode to link a wireless keyboard (Model A101urs6) to a Mac Power Book G4 running 10.5.8. The keyboard was linked at one point in the past, but then not used. When I am trying to hook it up now, it requires the passcode. Where can I find this, or is there a general number I can use?

Hello, and welcome to Apple Support Communities!
Try entering four zeroes.

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks

sandrafromsilver spring wrote:
When I try to print from my iPad I see a message "searching for printer" and then "no printer found.". I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc? Thanks
Go to the following link:
http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

I want to remove the header and footer when printing from my mac, i can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?

I want to remove the header and footer when printing from my mac, I can do this in the Page Setup on my PC but not on the Mac. I can do it each time I print but then it resets. How do I make a universal change?
== This happened ==
Every time Firefox opened

Go to the "File" menu, then "Print." The window that appears will have three drop-down menus at the top.
The first is labeled "Printer",
The second is "Presets".
The third is unlabeled but has "Copies & Pages" selected by default.
Click on that third menu and select "Firefox" near the bottom of the list.

HT1766 I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not callme or want to return the phone

I lost my IPhone 4S this morning and want to increase my cloud storage so I can back it up when it finds a signal and then remotely erase it...I'm assuming the worst that whoever finds is will not call me or want to return the phone. I went to icloud but it only govers me options to increase storage from my iPhone or a synced computer (mac or PC).

If the phone is offline there is no way to track it or send a message to it. You can place it in lost mode to lock it and send it a message (see http://help.apple.com/icloud/#/mmfc0f0165), but this will not take place until the phone goes back online, if it ever does. If it does, you will get an email informing you.
You might want to read this: http://support.apple.com/kb/HT5668.

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

TS1538 Every time I want to sync my iphone to itunes I have to uninstall and reinstall itunes on my pc. It will only ever find the phone once, then I need to go through this all over again.

Every time I want to sync my iphone to itunes I have to uninstall and reinstall itunes on my pc. It will only ever find the phone once, then I need to go through this all over again.
How can I solve this?

You'll have to do it by process of elimination. Sign into the iTunes Store through the App Store app, go to the Purchased section, and look at the list of apps purchased through your own Apple ID. Anything on your iPhone not in that list isn't yours and should be deleted. The same process would apply to content from the iTunes Store.
Or you can just restore the iPhone from your most recent backup and then redownload everything from the iTunes Store. But if you have a lot of apps or content, that obviously wlll be slow.
I updated my iphone by his ID , is it still problem?
That's probably how you got your friend's purchases. It won't be an issue for iOS, but it is an issue for those apps and content.
Regards.

Artwork doesn't print when printing cd insert, it shows on the preview but doesn't print?

Hi, after downloading the latest version of Itunes, the artwork no longer prints on the cd insert? It shows on the preview, but doesn't print on the insert? It worked fine before and the printer is working fine, it prints color photos and artwork, no problem?

Since you can see it in your device list it must have Find My Mac activated, but you're going to have to wait for them to take it online in order to either locate, lock or wipe it. Until it goes online you can't do anything. http://www.apple.com/support/icloud/find-my-device/
iCloud: Locate your device

My imovie opens in the dock, but then disappears off the screen - top right hand side, What's happening?

Hi
iMovie opens in the dock, but then seems to disappear off to the top right hand side of the screen and I can't find a way of recovering it? Suggestions please

Hi
If You press cmd+tab keys (cmd = the one with a cringle) (tab = left side keyboard third row big arrow pointing to the right)
By keeping cmd-key down and stepping with tab-key You can see if the iMovie symbol show up. then release.
Did it come back ?
Yours Bengt W

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

I am unable to start up my iMac running on 10.4.11 - the startup disk is installed and will not start up eben when I hold down the "C" Key. I do get the apple, but then it disappears.

Query by serial number
Apple's warrenty database will identify the type of Mac you have. Your serial number is securely sent, but you get only the name of your machine.
https://selfsolve.apple.com/agreementWarrantyDynamic.do
This site provides more information, but lacks security.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
or
This site provides more information, but lacks security too.
"A serial number is a unique, identifying number or group of numbers and letters assigned to an individual piece of hardware or software. It's used for various things depending on the product / brand but what is your Mac's serial number for and more importantly... what is it hiding and what can it do for you ?"
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html
( hint by K Shaffer )

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data?\

I just updated my itune on my PC and now it doesn't start. There was no error in installing/upgrading the software but once I rebut the computer the icon appeared but it wouldn't start the program. Did I loose all my music and data? How can I fix the problem? Thanks

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

When I try to burn a CD off of my MacBook Air (from iTunes) using the external CD drive, it acts like it is burning the CD, but then when I try to play it the CD is blank.

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Apple symbol appears on the screen but then nothing

When powering my Apple TV the Apple symbol comes on the screen but then disspears. I think it should then go to the menu but I have a blank screen.
The resolution indicator on the TV changes from 720 to 1080 and then slowly alternates from black to dark grey.
The TV is a Panasonic TXL55DT50B which seems to be working fine in all other aspects.
Can anyone help please.

Hi Defective5,
If you are having an issue with the on-screen menu not appearing on your Apple TV, you may find the following article helpful:
Apple TV: Basic troubleshooting
http://support.apple.com/kb/ht1551
Regards,
- Brenden

HP Software finds the printer, but then "the printer was unable to be installed over the network"

Similar Messages

Maybe you are looking for