HP Software gets corrupted often

I have a Dell laptop and an HP 8600 Pro wireless printer. This is not a business, just home use. I have to uninstall and re-install the HP driver often in order to print. It seems the driver gets corrupted. My laptop thinks the printer is offline, but it's not. We have other computers printing without these problems. I have virus protection and it's not finding anything. HELP!!

jgirl92
Welcome to the HP Community Forum.
I cannot tell you why that is happening; I can tell you it is not normal behavior.
Windows 8 can be a bit shaky compared to Windows 8.1: You might make sure your .NET Framework is up-to-date. The printer software might be touchy about the Framework software.
Check your Device Manager and make sure all your Drivers for any other devices are installed -- missing Drivers can play havoc with a system and cause odd side issues.
It could be that the wireless environment (network) is less than ideal -- try moving things around, even a few inches this way or that can make a difference.
You could try turning up (increasing) the wireless signal on your notebook if you think the signal is weak.
The following was written with HP systems in mind, you might find something helpful here:
Settings to Improve Wireless Connectivity
===========================================================================
You might download and install a Fresh copy of the Full Feature Software from the printer's Support site:
Install Full Feature Software – OfficeJet 8600 Plus / Premium
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Similar Messages

How can i re install the OS if the software gets corrupted in OSX 10.8 ?

how can i re install the OS if the software gets corrupted in OSX 10.8 ?

If the hard disk is damaged:
1. Press Command and R keys while your Mac is starting.
2. Open Disk Uitlity, select Macintosh HD in the sidebar and repair the disk. If it can't be repaired, take your Mac to an Apple Store

My vista software was corrupt so Microsoft remotely reinstalled it but I lost my itunes library. My songs are still on touch is there any way to get them back into my library?

My Vista software became corrupt so Microsoft reinstalled remotely but I lost my Itunes library even though I thought I saved to an external HDD.
Songs are still on touch but how do i get them to back into library so I can manage and back them up. Is there a way to back up the itouch?

Recover media from iPod
See this post from forum regular Zevoneer for options on moving your iPod data back to your computer.
tt2

ExFAT volume often gets corrupted

Hey,
I am using 3 volume setup on my 750GB HD. First one for OSX (HFS+), second for data (exFAT) and last one for Windows 7 (FAT32 -> NTFS).
Well I am using this setup for over year now and my exFAT partition gets corrupted like every 2 months and this time Disk Utility couldn't even repair it.
When it gets corrupted Windows or Mac cant recognize it but Macs Disk Utility usually repairs it. This time it didn't.
Does anyone have same experience? Can it cause some application?
It looked like it's cause by Xcode, but I started saving my projects to Mac volume, but obviously it was one of the apps it caused or it wasnt problem at all.
Can I do something about this or is there another way to share data between those 2 (locally)?

Had some issues with corrupted exFAT partition that Disk Utility said it couldn't repair.
2012-09-06 21:35:31 +0200: Verify and Repair volume “disk0s4”
2012-09-06 21:35:31 +0200: Starting repair tool:
2012-09-06 21:35:31 +0200: Checking file system2012-09-06 21:35:31 +0200: ** /dev/disk0s4
2012-09-06 21:35:31 +0200: Invalid sector size: 0
2012-09-06 21:35:31 +0200: Volume repair complete.2012-09-06 21:35:31 +0200: Updating boot support partitions for the volume as required.2012-09-06 21:35:31 +0200: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.2012-09-06 21:35:31 +0200:
2012-09-06 21:35:31 +0200: Disk Utility stopped repairing “disk0s4”: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
2012-09-06 21:35:31 +0200:
Looked like crazy on the net for solutions but couldn't find any. I started to poke around in the terminal and ran this:
fsck_exfat -d disk0s4
The -d flag is the debug flag and it gave me hope. I saw all my files flashing by and after a while I got this question:
Main boot region needs to be updated. Yes/No?
I hesitated for a long while but realized that I didn't have any other option. I picked yes and it said that it repaired the drive. It didn't appear on the desktop though. I ran fsck_exfat again and now it said that the disk was ok. I fired up Disk utility and tried to repair the drive there once again and now disk utility could repair it! =)))
Just wanted to share this lil advice since it seems common that exfat partions gets corrupted in OSX. I'm running 10.8.1 on rMBP here. I have no idea why Disk Utility doesn't call fsck and instead says that the disk can't be repaired. The tools for repairing it is in the OS and apparently and obviosusly it was fixable (...in my case).
Cheers

I cannot install itunes from the apple site .. it keeps saying the software is corrupted and cannot install correctly.. help!!!

I have tried to install the software from several sites including the apple site and they all say that the software is corrupted and did not install correctly to delete and reinstall. this seems unlikely as it has been weeks since I have been retrying the sites with the same results...is there an apple download that will check my pc for any errors that may be keeping the itunes from installing.. or is there anything else i can do to fix the issue.. its unlikely that itunes could stay corrupted for so ling without noticing it and fixing the issue..thank you...

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: One or more components of the HP printing software are corrupted or missing. Reinstalled software but Mac will not cause printer to print.

? MacBook 2006 w/Snow Leopard; HP B210 printer; print problem; error message: "One or more components of the HP printing software are corrupted or missing..." Reinstalled software but Mac will not cause printer to print. My MacBook Pro works fine with same wireless printer.

Hi ArielAce , thanks for getting back to me!
I would recommend downloading and running the HP Print and Scan Doctor.
Please keep me posted!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Back-up in case the track crashes/gets corrupted.

Hi,
Is there anyway i can safeguard my Java Webdynpro work in a case wherein the track crashes/gets corrupted. Is there a way i can take up back up of my work in scheduled time intervals. If yes, how do i deploy my back up onto the track again?
Regards,
Chaitanya

The iphone is designed to be synced to your cpmputer regularly.
Sync your contacts and calendars as designed.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

Messages getting corrupted in Mail app with Gmail

I'm having a following recurring problem with Mail app and my Gmail (company) account: At least once a day Mail app database is getting corrupted / out of sync with Gmail account. Mail is showing most of the mails correctly in the UI but some of the new messages are not the right ones but rather copies of older, typically already deleted emails. I.e. Instead of showing the real new msg content (subject, sender, msg body) it is showing in its place an older already deleted msg. How do I know: I go and check what Gmail webmail shows in browser window.
Rebuilding account sometimes works, often not. Usually I have to rebuild, close mail app, start again to get it back in sync. I have tried once deleting all Envelope-index files in Mail Library so that it did a longer rebuild. Helped for few hours and then this started again. Mail app is getting corrupted at least once a day. Very annoying because I cannot trust what I see, but have to check constantly webmail, which I would rather not use as my main tool for mail.
This problem started already with Lion and continued with Mountain Lion.
I guess next step is to delete all my account & setting and re-configure Mail app. Any other tips?

I'll chime in here to say that it affects me too.
Using gmail and mail ActOn to move messages around in mail.app. I'll start trying to see if I can make the corruption happen without using ActOn. I didn't have this problem in 10.4; and I only spent a week with 10.5 so I don't remember it happening then.
How do you identify the messages in the the finder for deleting so they can be re-downloaded? I've been accessing my corrupted attachments through gmail's web interface, so your work around would be easier than mine, assuming there is an easy way to find the right message.

Applying presets causes filter settings to get corrupted if process version updated

I have an ongoing problem with Lightroom 5.7 including earlier versions. The problem occurs when editing photos which use previous process versions (ie, 2010). My presets all have the Current Process version checked (as they should). Whenever I apply any preset to a photo, the settings for existing filters get corrupted (reset to 0). This includes my Graduated Filter settings, Adjustment Brush settings and Radial Filter settings. Those filters and their masks remain on the photo but their parameters have all been set to zero. I keep falling into this trap since it's natural to use my presets when making updates to photos. Often I don't realize this occurred until it's too late.
As a work-around (inconvenient) I can first manually update to the current process by right-clicking the photo and saying Settings/Update to Current Process (2012). Or by clicking the Lightening Bolt button in the upper right corner. But this must be done prior to applying any presets and I typically for get as my database has tens of thousands of pics. Even a preset with just the Process Version set will cause the filter settings to be corrupted. I'm not interested in applying a batch or Quick Develop process to all at once since I need to inspect each one as the process is updated. It would be great if this could be fixed in a maintenance release since it keeps biting me. I think it's important that this be fixed in LR 6.0 also. No doubt it's messed up many user's photos without them realizing it. Does anyone know a work-around so Presets can be used?
System: Win7 pro 64 (current), 4.2 GHz i7, 12GB, Lightroom 5.7.

In my opinion: not a good idea to convert old photos en-batch.
Recommend: convert (hand-selected photos) one at a time, or just use PV2012 on new photos.
There are more than one reason:
* As you know, process conversion yields very different results (if photo has been substantially edited).
* It takes some time to polish your PV2012 editing skills.
* Often when you are comparing PV2012 results to previous PV2010 results (which you've become familiar with, and like...), you may interpret differences in a more negative light, than if you were using PV2012 without comparing to a previous PV2010 version.
This last one can not be over-stated. Numerous times I have converted and been disappointed, at least initially. Recovered highlights can seem like loss of contrast. Detail in shadows can be distracting after initial conversion, until you step back for a while, then re-look at it...
Also, the process version itself (results I mean) takes some getting used to (even when not comparing to a previous legacy-pv edit). e.g. if you've become attached to the over-saturated shadows in previous process version, the shadows seem under-saturated in PV2012, etc...
Rob

Images getting corrupted in Lightroom 4.2

I have experienced this aswell. As mentioned in:
http://forums.adobe.com/message/4138626
and http://forums.adobe.com/thread/948417?tstart=0
My lightroom has after two weeks of playing with a fully working raw file corrupted it.
This is what the photo looked like originally http://500px.com/photo/14737987
As of today, I tried to reexport it with a diffrent watermark, the raw file corrupted. It exports a corrupted jpg and when I delete the .xmp metadatafile and try to import it again (same happens with it now when trying to import it to photoshop) the raw file now renders as corrupted in all software.
I have tried every possible way to reimport it, its just plain broken. If this should happen to my whole portfolio I would cry.

Here's evidence that LR is rewriting an entire JPEG file when I add metadata and do Save Metadata To File, just as Rob has described.
First, I imported a JPEG in which all the metadata had been stripped using Exiftool. Exiftool's dump shows that the image data starts at around hex offset 10:
Immediately after importing, I did Save Metadata To File, and the image data now starts at around hex offset 0cf0:
Next I added a short caption and did Save Metadata To File, and the image data now starts at around hex offset 0dd0:
I used the Microsoft Sysinternals' Process Monitor to trace file reads and writes to the JPEG file while LR was doing Save Metadata To File, and that confirms it is writing the entire 1 MB file:
Obviously, if there's a hardware fault anywhere in the path from the disk to memory and back, the contents of the image data could get corrupted.
And just as Rob has patiently explained, the fact that the file could get rewritten doesn't constitute any criticism of LR.

On receiving jpegs via email, sometimes they get corrupted, and there are horizontal blocks appearing on the image

On receiving jpegs via email, sometimes they get corrupted, and there are horizontal blocks appearing on the image that distort the image. Help???

Hi Bruce523,
Let's get to the bottom of this, your efforts are greatly appreciated! What is the software version on your device:http://vz.to/ZVhZsh ? I look forward to hearing from you soon.
Thanks for your contribution to our community forums,
AyaniB_VZW
Follow us on Twitter @VZWSupport

SQL Anywhere 11 databases are getting corrupt

Hi
We are having problems with databases that are getting corrupted.
We have a server that runs a SQL Anywhere 11 database. (the consolidated database)
Beside that, we have about 15 remote databases that run on the laptops of our mobile workforces.
To keep all databases in sync, we have setup a two-way server-to-laptop replication.
For the replication process we use “SQL Remote”.
Each laptop should replicate his data once in about 1 or 2 weeks.
For exchanging the messages we use the message type “file”.
This year we already experienced 6 times that a remote database got corrupt after replication. (after running dbremote.exe).
The log file of the dbremote utility does NOT show any errors, the replication seems to be finished without any problems.
But after this, it’s not possible anymore to connect to the database, because of the following assertion error:
[Sybase][ODBC Driver][SQL Anywhere]Internal database error *** ERROR *** Assertion failed: 201501 (11.0.1.2376)
Page 0x0:0x7182d1 for requested record not a table page -- transaction rolled back
Error code=-301
SQL state=HY000
Can someone tell me more about this error?
What goes wrong and why?
Or does someone has some tips on how to prevent this or tips on how I can do some analyzing myself to see what exactly got broken in the database?
Any help is appreciated.
Thanks.

Hi Krenton,
Page 0x0:0x7182d1 for requested record not a table page -- transaction rolled back
Error code=-301
SQL state=HY000
Can someone tell me more about this error?
Specifically, the page at offset 0x7182d1 in database (So if you have a 4KB page size, this would be byte offset 7439057 x 4096 = 30470377472 into the database) in 0x0 (the main database running) has a page header that indicates that the data on the page is not table data. We don't know what it is, but the signature for table information connected to the table you're scanning is 'not as it should be'.
What goes wrong and why?
In the real world, lots of things can go wrong. I list some of the possible things on this question here on the SQL Anywhere forum. This list can include software bugs, but can also include instances where the media is not respecting write-through or write-ordering - see http://scn.sap.com/docs/DOC-34090 (SQL Anywhere I/O Requirements for Linux and Windows) for more details.
There are also known instances where Intel drivers are not set with the correct write-through settings. The details of this are in the documentation: DocCommentXchange (Improving Robustness on Intel storage drivers).
Technical Support should still provide assistance. If the problem is a newly-discovered bug in SQL Anywhere 11, their advice will be to apply a more recent EBF or upgrade to a new version. However, that is unlikely in this case.
Breck is correct - it would probably be best to take a look at the database file in technical support for more clues as to what's happening here. With the current information, it's hard to say more than "something was not correct at the time the page was looked at by the database server."
Regards,
Jeff Albion
SAP Active Global Support

My new Macbook Air (downloaded Mavericks) is giving trouble in Google Chrome - drafts get corrupted, Error messages pop up while composing mail

I am attaching an etrecheck report on my virtually new Macbook -Air to help diagnose the problems facing as regards Gmail - drafts get corrupted ; Error messages appear while composing emails & revolving Beachball shows up in various programs !
Also for a brand new machine it operates much slower than my husbands older Mac Airbook !
Hardware Information:
          MacBook Air (13-inch, Mid 2013)
          MacBook Air - model: MacBookAir6,2
          1 1.3 GHz Intel Core i5 CPU: 2 cores
          4 GB RAM
Video Information:
          Intel HD Graphics 5000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9.1 (13B42) - Uptime: 11 days 16:27:24
Disk Information:
          APPLE SSD SD0256F disk0 : (251 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 250.14 GB (219.37 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          Apple Internal Memory Card Reader
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.microsoft.office.licensing.helper.plist
          [not loaded] com.teamviewer.teamviewer_service.plist
Launch Agents:
          [not loaded] com.teamviewer.teamviewer.plist
          [not loaded] com.teamviewer.teamviewer_desktop.plist
User Launch Agents:
          [loaded] com.google.keystone.agent.plist
User Login Items:
          iTunesHelper
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          SharePointBrowserPlugin: Version: 14.1.0
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Default Browser: Version: 537 - SDK 10.9
User Internet Plug-ins::
          WebEx64: Version: 1.0 - SDK 10.6
Bad Fonts:
          None
Old applications:
          Microsoft AutoUpdate:          Version: 2.3.6 - SDK 10.4
                    /Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
          Microsoft Error Reporting:          Version: 2.2.9 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Error Reporting.app
          Microsoft Ship Asserts:          Version: 1.1.4 - SDK 10.4
                    /Library/Application Support/Microsoft/MERP2.0/Microsoft Ship Asserts.app
Time Machine:
          Auto backup: YES
          Volumes being backed up:
                    Macintosh HD: Disk size: 232.96 GB Disk used: 28.66 GB
          Destinations:
                    rakesh [Network] (Last used)
                    Total size: 2
                    Total number of backups: 5
                    Oldest backup: 2013-12-12 03:23:43 +0000
                    Last backup: 2013-12-28 15:14:40 +0000
                    Size of backup disk: Excellent
                              Backup size 2 > (Disk size 232.96 GB X 3)
          Time Machine details may not be accurate.
          All volumes being backed up may not be listed.
Top Processes by CPU:
               2%          WindowServer
               2%          hidd
               1%          EtreCheck
               1%          Microsoft Word
               0%          SystemUIServer
Top Processes by Memory:
          131 MB          softwareupdated
          111 MB          mds_stores
          98 MB          Microsoft Word
          90 MB          Finder
          86 MB          Google Chrome
Virtual Memory Statistics:
          119 MB          Free RAM
          1.56 GB          Active RAM
          1.63 GB          Inactive RAM
          569 MB          Wired RAM
          6.31 GB          Page-ins
          7 MB          Page-outs

Also here's the log before it happened. As you can see there is no activity from 9:48 to 10:00 am when the sound occurred.
23/02/2014 9:48:12.792 am ntpd[52]: FREQ state ignoring -0.145411 s
23/02/2014 9:48:15.258 am WindowServer[96]: _CGXHWCaptureWindowList: No capable active display found.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000280
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319378: AirPort_Brcm43xx::powerChange: System Sleep
23/02/2014 9:48:20.000 am kernel[0]: ARPT: 61.319390: wl0: powerChange: *** BONJOUR/MDNS OFFLOADS ARE NOT RUNNING.
23/02/2014 9:48:20.000 am kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
23/02/2014 10:00:04.000 am bootlog[0]: BOOT_TIME 1393167604 0
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.appstore" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
23/02/2014 10:00:06.000 am syslogd[17]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".

Files keep getting corrupted.

Heavily used, shared, files keep getting corrupted. Seems like StarOffice8 or Solaris (not sure which is responsible) doesn't do file locking! If someone opens the file, when it's already open, there's no indication of that! Obviously that can lead to edits being lost. However, the bigger problem is if 2 people save at the exact same time. In that case the file becomes completely mangled and unreadable!
Anyone have some solutions out there?

The Captivate version number is shown at Help > About Adobe Captivate. But you have to be quick because it's right at the top and the list of credits start's scrolling immediately. Annoys the heck out of me.
Having Admin rights to your PC is not the same as Run As Administrator on an app. It's one of the (many) changes to the Vista and Win7 OSs intended to prevent malicious software from gainin a foothold.
If you're in a corporate IT environment chances are you don't have admin rights to your PC because that prevents people from willy nilly installing apps on their own workstations. However, a good IT Support dude (who usually all DO have admin rights to everyone's computer) can usually configure the security privileges for a particular application to give you admin rights to it.
In the case of Captivate 5x and Win7, the app MUST be set up to Run As Administrator. Otherwise some things just don't work.

Imported MP3s (mostly from Amazon) getting corrupted by iTunes?

I have a relatively large collection (~12000 songs) managed by iTunes. Recently, I have been having major problems with MP3s, mostly downloaded from Amazon, getting corrupted by iTunes. By corrupted, I mean that the song has skips and weird digital artifacts that I haven't had problems with since the very early (pre-1999) days of using Napster. If you've heard this before, you'll probably agree that it's hard to describe, but the song basically goes off-beat for a split second, can sound like a warble machine, and sometimes has very harsh ear-popping noises.
This issue just recently started happening - I want to say within the last 3-4 weeks. I don't want to think that it's the recent upgrade to iTunes, but here is my thought:
I think that iTunes is modifying my MP3s, particularly the ones with star ratings, but also other files. Once edited, many seem to be corrupt. For the ones from Amazon, I've been able to download replacement versions (after getting their cust. service to re-enable the download) and the songs play fine in Winamp and WMP, until I play them in iTunes. Then they skip and blip all over the place in all 3 programs! The file size is changed by iTunes, often to a smaller file size (seems weird, if it's adding tag info?).
ANY help is appreciated. I'm about ready to stop using iTunes, change all my files to read-only, and find another way to upload to my iPods.
Thoughts?

Are you positive they didn't import, or is it just that there aren't where you expect to find them? The thing about wav files is they don't accept tags, so if you import them they will just get added under the filename.
I would just copy across the whole media folder with libraries and all, then start iTunes with the option key held down and point it at the media folder. This will just use the library in its new location and you don't have to import, etc.

HP Software gets corrupted often

Similar Messages

Maybe you are looking for