HP Solution Center error "flash9b.ocx failed to register"

I have a similar Flash9b.ocx faied to register problem that I have been trying to solve for several weeks.It started after I upgraded to the latest Flash Player 10.3.183.7 via the official Adobe website. After this upgrade on start up I got the following HP Solution Centre (printer software) error message:
C:\Windows:\system32\Macromed\Flash\Flash9b.ocx failed to register. HRESULT-2147220473. Contact your support personnel.
Further investigation confirmed that Flash Player had stopped working and where the image should be there was a blank black box. I tried reinstalling the latest version of Flash Player again but it made no difference. I was prompted to insert the original Solution Centre disk to solve the problem and although I tried this, it had no effect. I uninstalled Solution Centre including manually deleting any HP files that had been left behind and did a complete reinstall of the latest version including relevant patches from the HP website. This appears to have solved the problem as far as the Solution Centre error messages are concerned. However, on further investigation I found the Flash9b.ocx file mentioned above no longer exists but Flash Player still isn’t working.
I am running Vista (32bit) with all the current upgrades and Internet Explorer version 9.0.8112.16421 update version 9.0.2 (KB2559049)
Thanks for your help

After more than two weeks of trying, I finally found a solution to my HP Solution Centre Flash Player 10 conflict. Below is what worked for me and if you have a similar problem I hope this posting is of some use. uninstall Solution Centre & reinstall the latest version plus all the relevant patches from the HP website. Reset browser settings which in my case was IE 9 (Internet Options, Advanced tab, Reset) followed by a restart. Then uninstall Flash Player (Control Panel, Programs & Features, Uninstall) followed by another restart. Finally go to Adobe website and download the latest version of Flash Player.
Hope this helps

Similar Messages

"Flash9b.ocx failed to register" error message and problems caused

I didn't want to update my flash player but finally was "bullied' into doing so, because i kept receiving a screen message telling me to update it, without being given the option to say "No. Thank you anyway." After I updated my flash player to 11....something (I didn't memorize all the numbers), even though the installation completed, I now have this ERROR MESSAGE whenever I try to access the internet on my computer:
Solution Center
Module
C:\WINDOWS\system32\Macromed\Flash\Flash9b.ocx failed to register.
I don't think I really needed my Flash player updated at all in the first place. I don't use computer games and don't have an "x-box", I don't have a camera on, or with my computer. I just didn't want to keep seeing that irritating demand to "Update".
Is there a way for me to remove the update and re-install the flash player I already had?
In the past, when I used my HP Officejet installation software from the original cd, to reinstall my printer-Solution Center software, it solved the problem I had when updating other Adobe software. Unfortunately, the software from this cd, did not solve the problem this time.

Download the uninstaller for Flash Player
The Flash Player uninstaller executes on both 64-bit and 32-bit version of the Windows operating systems.
uninstaller (797 KB)
You can download older versions here:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Note: It's not only the Flash player updater that will prompt you to update - Many pages that have Flash content will REQUIRE the latest version and WON'T WORK with anything older.

Problem Flash Player bei IE 11 mit HP Solution Center+Datei Flash.ocx

Hallo
ich versuche ein für mich sehr schwieriges und komplexes Problem zu lösen und bitte um Tipps oder Hilfe.
Gerät: Notebook / Windows 8.1 - früher Vista....und HP Drucker und ich bitte um Entschuldigung für die lange und komplexe Schilderung
da ich schon mit sehr langen und wiederholt fehlgeschlagenen Lösungsversuchen und Suchen in diversen und HP Forum
recht ratlos bin.
Ausgangspunkt als zeitliche Folge von Ursache und Wirkung kann ich schlecht rekonstruieren. Entweder hängt es damit zusammen, dass ich ausser Chrome und IE noch Firefox Browser installierte bzw. auch das letzte neues Software-Treiber- Update von HP installiert wurde oder auch nach einem Microsoft Update KB 3001237 vom 16.10.
Das Problem zeigte sich vordergründig im fehlerhaften Aufrufen des HP Solution Centers meines All in One Druckers Officejet 6500 E709a.Ein Fehlerprogrammbild namens HPdirec. exe gibt die Fehlermeldung aus: '
C....Windows System 32\ Macromed\ Flash\Flash.ocx ist entweder nicht für die Ausführung unter Windows vorgesehen oder enthält einen Fehler. Installieren Sie das Programm mit den Originalinstallationsmedien erneut oder wenden Sie sich ...an Ihren Systemadministrator oder Softwarelieferanten..
Im nur starr auftauchendem schwarzem Solution Fenster heisst es 'dass die auf Ihrem Computer installierte Version des Flash Players nicht mit dem Internet Explorer verwendet werden kann.'
Dann Link-Hinweis auf Adresse Adobe usw.
Dort wird mir aber lediglich nach mehreren Klicks mitgeteilt, dass der Flash Player bereits im IE integriert bzw. installiert sei.
und wenn ich doch hartnäckig und laienhaft versucht habe ,einen Adobe Flash Player ausfindig zu machen und downgeloaded hatte und ihn dann installieren wollte, entpuppte es sich als nicht installierbar bzw. das KB-Update von Microsoft (siehe oben)
In den AddOns des IE finde ich unter Name 'nicht verfügbar' und Herausgeber 'nicht verfügbar' lediglich einen 'Shockwave Flash Objekt' als aktiviert - kein weiteres AddOn und unter Sicherheit ist kein Haken bei AktiveX-Filterung...
Unter dem Ordner C...... Windows\System32\Macromedia\Flash finde ich
nur
activex.vch
Flash64_15_0_0_189.ocx
FlashInstall.log
FlashUtil64_15_0_0_189_ActiveX.dll
FlashUtil64_15_0_0_189_ActiveX.exe
FlashUtil64_15_0_0_189_Plugin.exe
NPSWF64_15_0_0_189.dll
plugin.vch
aber nirgendwo ist dort und auch (Suche gestartet) im C:\Laufwerksverzeichnis die oben in der Fehlermeldung angegebene Datei Flash.ocx zu finden.
Zunächst hatte ich diese Fehlermeldung nur mit meinem HP Solution Center gekoppelt, aber
die Meldung tauchte auch woanders auf. Ich habe nach unendlich vielen Versuchen mit Deinstallation, Installation - IE Deaktivierung - Aktivierung drei Cleaner Tools laufen lassen in der Hoffnung, dass durch Bereinigung alter oder fehlerhafter Registry Einträge das Problem von alleine resetten würde.
Und ausgerechnet bei dem Tool Wise Registry Cleaner tauchte die gleiche Fehlermeldung auf wie oben nur mit einer anderen Bezeichnung vor dem .EXE - und im Hintergrund als zunächst starres Bild die Umrisse vom Menü des Tools.
Jedoch: Als ich lediglich auf den OK Button der Fehlermeldung drückte, wurde das Tool Menü vollständig geladen und ich konnte damit arbeiten, im Gegensatz zu dem HP Solution Center.
Ich benötige aber das Menü des HP SC um im Besonderen die Scan- und Speicherung Funktion des Geräte zum PC hin zu nutzen und auch andere Funktionen des Multi-Druckers gebrauchen zu können.
Danke für eine Reaktion gleich welcher Länge und Art auch immer im Voraus...!!!

1. Re: Problem Flash Player bei IE 11 mit HP Solution Center+Datei Flash.ocx
玩玩无聊 2014-11-6 下午11:49 （回复 ackibaun）
Thank you for taking our survey. We value your feedback.
If you need help, we want to hear from you.

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

HP Solution Center requires flash.ocx

I've installed the software for my C8180 on Windows Vista. This is a clean install. I've deleted any previous install folders and registry entries. I've installed the latest version of flash player, but I still get an error that Solution Center is looking for flash.ocx. When I start Solution Center, nothing happens. If I open the processes tab of Task Manager, it shows the exe is running. If I stop the process, I get the error that it can't find flash.ocx. Is there a way to get Solution Center installed? I've tried both the original cd and the download from HP. I appreciate your help.

Hello there! Welcome to the forums @Ed57gmc
I would suggest trying the solution from a Microsoft Support Engineer in this thread I have found below, when researching the error you're seeing.
Check out the second post (the Answer), and give it a shot. It resolved the issue before and hopefully it will fix yours too!
Tried to open the HP Solution Center- I get an error message "This program requires flash.ocx, which...
Cheers
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Lenovo solution center errors out on launch for task bar

Whenever I open the Lenovo solution center, I get this error.
Http Comunication Error
The following Monitors has encountered some error:
JSON parsing failed: LargeEnterpriseMonitor
Then, it will periodically crash until I restart.
This is a new G505 (3 months old). It has done this on Win8 and it still does it on Win8.1
Also note the extensive spelling errors and grammar. I'll live with that if I can get by the errors

Hi Mikend,
Welcome to Lenovo Community Forums!
I’m sorry to hear that the LSC (Lenovo Solution Center) is displaying an error message even after upgrading to Windows 8.1 in your G505, I suggest you to re-install the LSC for the Windows 8.1 while installing right click on the downloaded LSC file and select “Run as administrator” and check if the issue persist.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HP Solution Center error

I have an HP Photosmart Premium 309g wireless printer. I also have the HP Solution Center software install. I am run on Windows7 64-bit. There are times when I open the HP Solution Center application that the software opens and runs fine. Then another day when I try to open the HP Solution Center application I get the following message:
I have done as the message says by plugging in the USB cable and I have re-run the setup program the installation CD. I have also uninstalled all HP applications for the printer including drivers and have downloaded the lastest full-version of the software from the HP site which included the HP Solution Center. When I try installing the new downloaded version I get and error in installation message and thne there is a back out of what was installed and there is an application installed on my computer call HP Installation Error-Windows 7. I have done the stuff that the application suggests but It still doesn't work. I have also come across this same issue with the HP Solution Center on a Window 7 machine and an HP Officejet Pro 8500 A909g Series printer. Has anyone else come across this error/issue and what was your solution to solve it.

This worked for me after months of not being able to use the Solution Center and probably 50 re-installs etc!
It doesn't open the SOlution Center, it only opens the Scan function, and is fully functional for that!
To get scanning back:
1.         Click on the start menu.
2.         Click on Computer.
3.         Open the C drive.
4.         Open the Program Files (x86) folder.
5.         Open the HP Folder.
6.         Open the Digital Imaging folder.
7.         Open the bin folder.
8.         Right-click on hpiscnapp.exe and select send to.
9.         Select send to Desktop (Create Shortcut)
10.       Close the window to bring up the desktop.
11.       Right click on the new shortcut.
12.       Select Rename.
13.       Name the shortcut something easy to remember like “HP Scan” and press Enter on your keyboard.
14.       Double-click the shortcut to start scanning.

K450 lenovo solution center error

Hello i did buy this pc
k450 with
16gb ram
i7
the problem is that lenovo solution center
keep saying my drivers are old.
http://i59.tinypic.com/id8uo1.png
[IMG]http://i59.tinypic.com/id8uo1.png[/IMG]
i did download all driver and install them
i did run all windows update still nothing working.. how do fix the problem?

Hi ilir1992, welcome to the forum.
See this thread:
http://forums.lenovo.com/t5/IdeaCentre-Desktops-Home-Servers/Q190-and-Lenovo-Solution-Center-Softwar...
You should you run the Lenovo system update, that you can download here:
http://support.lenovo.com/en_IN/research/hints-or-tips/detail.page?LegacyDocID=TVSU-UPDATE
It may not find any package for your system, however: after it bombs out, and you close the app, it will get rid of the warning "!" on the interface.
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Error 1904 - Module failed to register

I have been getting an error whenever I try to install Crystal Reports 2008 that says the following:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register. HRESULT -2147024769. Contact your support personnel.
I have upgraded to the latest version of .NET 4 and turned off all antivirus software (as well as attempted other remedies suggested in other posts). However, I continue to get this error during installation regardless of if I run my installer off the CD we purchased or the latest download.
If possible, please reply with a solution or possible cause.
Thank you

Hi All,
I´m with a same problem.
I installed the CR 2008 SP1 in my notebook and when the installation begins register the module ReportConvTool.dll the intallation does not continue and not display error message.
Someone know what's going on ?
Tks.

Oracle fail safe error "FS-10784" failed to register database with group

Hi,
I'm getting following error while registering database to FS manager group.
Version is -
1) Fail safe 3.4.2
2) Database 11.2
3) 64 bit windows
I executed following steps in order to create FS.
1)     Install 11.2 software on node 1
2)     Install 11.2 software on node 2
3)     Install OFS 3.4.2 on node 1
4)     Install OFS 3.4.2 on node 2
5)     Create cluster tree from FS manager
Below is the complete error..
Versions: client = 3.4.1 server = 3.4.2 OS =
Operation: Adding resource "COMPACTOR" to group "dbclusterdtc"
Starting Time: Dec 01, 2011 18:25:31
Elapsed Time: 0 minutes, 3 seconds
1 18:25:31 Starting clusterwide operation
2 18:25:32 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 18:25:32 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 18:25:32 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 18:25:32 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 18:25:32 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 18:25:32 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 18:25:33 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 18:25:33 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 18:25:33 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 18:25:33 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 18:25:33 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 18:25:33 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 18:25:33 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 18:25:33 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 18:25:33 ** ERROR : 0xEA: More data is available.
17 18:25:33 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
18 18:25:33 ** ERROR : FS-10990: The error 0x800400EA was reported as a system error, but the error message cannot be found
19 18:25:33 ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
20 18:25:33 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
21 18:25:33 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
22 18:25:33 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
23 18:25:34 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
24 18:25:34 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
25 18:25:34 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
26 18:25:34 Please check your Windows Application log using the Event Viewer for any additional errors
27 18:25:34 The clusterwide operation failed !
Inputs are appreciable.
Regards

After applying patch of 3.4.2.3, still i'm facing this problem. But however there are very less errors....I think the problem is with Listener.
1 20:34:03 Starting clusterwide operation
2 20:34:04 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 20:34:04 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 20:34:04 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 20:34:05 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 20:34:05 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 20:34:05 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 20:34:05 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 20:34:05 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 20:34:05 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 20:34:05 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 20:34:05 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 20:34:05 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 20:34:05 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 20:34:05 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 20:34:06 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
17 20:34:06 > FS-10490: Configuring the Oracle Net listener for COMPACTOR
18 20:34:06 >> FS-10600: Oracle Net configuration file updated: D:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_2\NETWORK\ADMIN\LISTENER.ORA
19 20:34:06 >> FS-10606: Listener configuration updated in database parameter file: M:\Datafiles\compactor\spfilecompactor.ora
20 20:34:13 >> FS-10605: Oracle Net listener Fsldbclusterdtc created
21 20:34:14 ** ERROR : 0x426: The service has not been started.
22 20:34:14 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb11g_home2TNSListener for the Oracle Net listener
23 20:34:14 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
24 20:34:14 > FS-10090: Rolling back Oracle Net changes on node CSIPLAPP1DB2
25 20:34:17 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
26 20:34:17 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
27 20:34:17 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
28 20:34:17 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
29 20:34:17 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
30 20:34:17 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
31 20:34:17 Please check your Windows Application log using the Event Viewer for any additional errors
32 20:34:17 The clusterwide operation failed !

Error 1905 module C:\itunes\ITDetector.ocx faile to register HRESULT 214722

Had ipod for 7days not in use. I've bought a new one and had to update my itunes, removed old one, but it kept telling me that it could detect my old version. Anyway tried to download and the above message came up.
strangly I now have itunes my computer and now busy sorting my library out, but what does this message mean.

I also have this problem. the error 1905 comes up and will not allow the update of itunes7. I have itnes4 now for my ipod mini. it will not upgrade and seems others have the same problem. Whats up and how do we get this nano to work?? Help!!!

Missing hp solution center.. please help..

hi everyone, new here.. i just bought a new deskjet D4360.. i'm using a XP professional .. i'll tell the story of what i did and went through till my current condition..
it started with the time when i first tried to install my printer, installation went well, in the end i was able to excess the printing preferences and print. However i could not excess hp solution center.. everytime i double-clicked i, my processor will work a little and then nothing happens after that.. no matter how many times i double-clicked it, nothing happens..i then updated my driver and software with the software and driver package from the hp website.. with no improvement to the situation... still after double-clicking no response..
now what i did; i opened up my error log and found out that the file flash9b.ocx was not registered.. so i tried 2 things to get it registered.. one was to type in (regsvr32 C:\WINDOWS\system32\Macromed\Flash\flash9b.ocx) and then (regsvr32 flash9b.ocx) in the Run program at the start button since the previous one did not work i typed the next one.. instead it said the file did not exist.. =/... [ i got this from the adobe forum] .. Next, I figured since it had something to do with adobe flash, i decided to update that..nothing happened.. i updated to the 10th version.. which then lead me to the next problem.....
then i double-clicked the hp solution center icon, it started an installation process (this happened after i have the 10th version of the adobe flash )...i dont know why but that happened, since it needed the cd to comtinue, i provided it... then during the process, it said the flash9b.ocx failed to register.. and at the same time another window opened up and said that there was no hp device detected and hp solution center will close.. then i pressed it again but this time it said it cannot detect a hp device.. but but, my computer has recognised that the printer is ready to be used, i could even print..! ..=/..
then i thought that perhaps something really is wrong with the setup file i used, so i used the unistall_L3.bat file in the cd to cleanse my pc of any remaining hp software and driver ( learned this from the hp website ) . then i installed the full package software and driver from the hp website... i guess i did it wrong, cause after the installation my computer did not recognise the printer.. not sure what happened..
then i decided to get myself back to sqaure 1 since im not going anywhere, .. so i used the unistall_L3.bat file again and then this time installed with my installation cd.. but i dont know why, the installation did not go the same way.. my computer could recognise the printer and i could print etc... but i cant seem to find any of the other files which was there when i first installed, i.e hp solution center and hp digital imaging.. even after using the full package software from the hp website.. i cant seem to get any of those.. and the package installation says that i already have a new version of software installed in my computer....=/ .. so this is where im stuck at the moment..
someone please point out where i did wrong or something i can do to fix the situation.. i want to be able to use the hp solution center to use it's functions.....
thanks for your time, i understand that this could be a really long read.. =D

is there anyone out there who knows how to ?

2 Attemps to install HP Solution Center for printer on HP Pavilion failed. ScreenShots

I had to do a factory recovery recently. I can print with the HP C7280 without problem from programs. I have had this printer and Solution Center working on this pc prior to the factory recovery and another pc before that. I have tried now to install my HP Printer All in One Printer Solution Center now twice with fails. I hope the screenshots help.
I have 1) downloaded a new full install - 2) turned off all antivirus - 3) rebooted and restarted the HP Printer - 4) made sure all windows updates have been applied for windows 8.1 - 5) tried following the solutions HP provided but still with fail. The install goes all the way through until the very last "configuring device" ... and then times out. Thank you for any help.
I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
Look to the left and click on the STAR for a KUDO
Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!

Hi @lacarottess,
Welcome to the HP Forums!
I noticed that you are looking for the HP Solution Center software for your HP Deskjet F2290 and HP Scanjet 2300c. I am happy to look for this for you!
For your HP Deskjet F2290 printer: the HP Solution Center is found in the full feature software and drivers found at this website, HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver, or you can use the HP Printer Install Wizard for Windows (recommended).
For your HP Scanjet 2300c: I am sorry, but to get your issue more exposure I would suggest posting it, in the commercial forums since this is a commercial product. You can do this at HP Enterprise Business Community.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

2 Attemps to install HP Solution Center for printer on HP Pavilion failed. ScreenShots

I had to do a factory recovery recently. I can print with the HP C7280 without problem from programs. I have had this printer and Solution Center working on this pc prior to the factory recovery and another pc before that. I have tried now to install my HP Printer All in One Printer Solution Center now twice with fails. I hope the screenshots help.
I have 1) downloaded a new full install - 2) turned off all antivirus - 3) rebooted and restarted the HP Printer - 4) made sure all windows updates have been applied for windows 8.1 - 5) tried following the solutions HP provided but still with fail. The install goes all the way through until the very last "configuring device" ... and then times out. Thank you for any help.
I ALWAYS KUDO AND MARKED SOLVED. IT'S THE RIGHT THING TO DO ... doncha know. ":-D
Look to the left and click on the STAR for a KUDO
Look to the right and see OPTIONS to mark ACCEPT AS SOLUTION. Thanks!

Hi,
Please download the following software and drivers, save on your computer (remember where) and double click the downloaded file to install:
http://ftp.hp.com/pub/softlib/software12/COL31995/mp-109977-2/OJ_AIO_J6400_Full_Win_WW_140_408-4.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Download HP Solution center

I have tried to find the driver and it continues to tell me that it comes with my operating system. I tried to run the scan fixer and got this message
Solution Center Error:
the tool was unable to find the HP Solution Center application that you need in order to scan with HP software. If you want to scan with HP software, you can re-run the install from the CD, making sure to include HP solution center and HP imaging device function. or you can download and install the most current full feature software from HP Customer Care.
The problem is, when I click on the link there is no place to download it. It tells that it is already installed.
This question was solved.
View Solution.

Hi,
The HP Solution Center is not available for Widows XP 64-bit, full functionality is only available for a 32-bit XP operating system.
As listed on the HP site, the printer is incompatible with XP 64-bit, only a workaround for printing is available by using the 990C driver and scanning is not supported on the operating system:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00625738&cc=us&dlc=en&lc=en&os=2030&product=908...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Solution Center error "flash9b.ocx failed to register"

Similar Messages

Maybe you are looking for