HP Solution Center for 2 printers on Windows 7 64bit

I have an HP Windows7 professional 64 bit laptop with a hp photosmart c309g and a Photosmart 7520 e all in one for wireless printers on our home network. the c309g shows up in the HP Solution Center, but the 7520 does not, so we are unable to set up printer shortcuts for easier print or items as either one - sided or two-sided and for changing between regular letter printing to photos.
Is the 7520 able to be added to the HP Solution Center? How? Will we be able to have both in the Solution Center?

Hi,
Have you installed its software and drivers yet ? If yes
Click Start > All Programs > HP > HP [your printer]
Properly installation you will have its icon on desktop.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP solution center for window vista 32 bit and HP 6210

    need to download Solution Center for HP office jet 6210 and Windows vista 32 bit. Any help would be appreciated.

    Hi mary1929,
    HP Solution Center is the main software program that you use to control and maintain HP printers that use version 13 and 14 software. Your printer uses a version of software that came before version 13 and 14. I believe you have something called HP Director. HP introduced HP Solution Center to replace HP Director in 2004.
    I did find a document that says you may be able to install software for Vista that includes Solution Center. Please take a look at the information in this document; HP Director and Windows Vista Compatibility. If you recently upgraded to Windows Vista, you will not be able to use HP Director. However, you might be able to upgrade to HP Solution Center in its place.
    This might be the software you need; File name: AIO_CDB_Full_Non-Network_enu_NB.exe
    I hope this helps. If this does resolve the issue please let me know, if you have any additional questions, don't hesitate to ask.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Cannot download Solution Center for Off Jet 6500 Wireless since going to Windows 8.1

    I get a failure message and am unable to download HP full feature software (a.k.a. the "solution center") for my HP Officejet 6500 Wireless on my Aspire E1-571-688 Laptop.   The solution center was successfully downloaded when I got the laptop in August 2013.  It was running fine until I upgraded from Windows 8 to 8.1. 
    When I discovered that the solution center would not run, I removed the printer and driver software beofre trying to reinstall.  When trying to get the Solution Center back, I can't get past the download step because during download it "fails".  I was able to download "drivers only" through the "add a printer" option, and I do have printing capability, however I am unable to use the scan function from the laptop (or directly from the 6500).
    Weird that I can't get the scan function to work on the unit itself (I get the "no scan options" message when trying to do so) as I have confirmed mutliple times that the printer is successfully connected to the correct network.
    Help please!  Thank you
    Geo48

    Geo,
    Welcome to the HP Forum.
    You will not have access to the full features of the printer software until you manage to install the Full Feature Software.  Scanning is one of those functions.
    The initial Connection to the Internet is indeed part of it -- you need a reliable, clean, consistant connection that will allow you to download the full data file.  Your connection may be dropping out part way through.
    You may need to upgrade your network drivers after the Upgrade to Windows 8.1 .  There are other issues can can plague a system after the Upgrade, most are well documented at this point.  You can check with your system's Forum to what others are saying.
    Basic Drivers only are much smaller in size -- just a few MBs.
    Random Thoughts..
    You need to resolve the network issues so you can download the full software.
    You might have a friend download the file onto his computer and transfer the file to your system using a USB stick.  This does not fix your network problems but it does solve at least the issue of not being able to get a hold of the installation package.
    You might try taking the computer to a friend's house -- if the issue is not within your computer's network setup, then the Upgrade may have "upset" the relationship between the computer and your home network.
    Click the Kudos Thumbs-Up to say Thank You for the help." .
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • Downloadin​g HP Solution Center for Windows 7 Profession​al 64-b

    I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer.  My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download.  Any assistance will be appreciated.

    Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having issues finding the installer.  I would like to help.
    I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Installing HP Solution Center for HP Photosmart C6380 in Windows 7

    Installing HP Solution Center for HP Photosmart C6380 in Windows 7
    After this scanner/printer has loaded down the Driver - Product Installation Service the next step of downloading software is interrupted by the notice/instruction "The system cannot find the file specified" identified as 
    C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
    Then the  Driver - Product Installation Service is once again downloaded and when that issue is successfully completed, then, once again, the next download is interrupted by 
    the notice/instruction "The system cannot find the file specified" identified as 
    C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
    and the process continues in an infinite loop.
    That means that my HP Photosmart C6380 in Windows 7 will be useless during an infinite time. 

    Hi,
    Follow the steps below and check if that resolve the issue:
    1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
    Now try reinstalling the HP Software and check if the installation goes as expected.
    If the issue persists continue following the next steps below:
    2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
    3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
    4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
    5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
    6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
    7. Run the installation file and check for any difference.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Problem with Lenovo Solution Center for Windows 8.1

    Hi,
    I reinstalled my Laptop. I wanted to install the Lenovo Solution Center for Windows 8.1 (64 bit).
    (I installed it with the necessary administrator priviledges.)
    But it didn't work. 
    I am getting the following error message. 
    Can anyone help me with this problem. Thanks in advance.
    Best regards,
    Jens.

    This one?
    http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-73784
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Fatal error during installing HP Solution Center for Deskjet F2180

    Hi everyone!
    During installation of HP Solution Center for Deskjet F2180 it says "fatal error" - couldn´t write the key to " \SOFTWARE" plus "MSI.GPBaseService2" error.
    I tried many times to completely uninstall all this software and delete keys in regedit and reinstall it. I also respected the order: firstly install, after that connect printer. HP Digital Imagiing Monitor is working right but iťs insufficient for me. Maybe there will be some problem with permissions in Windows, who knows. I have just installed Windows 7 Professional 32-bit.
    Could you help me to solve it, please? Each response pleases!
    This question was solved.
    View Solution.

    Welcome to the forums @MuzikizuM 
    I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
    A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
    Let me know the results
    Have a great day!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Solution Center for Photosmart 2575 All-in-One

    Hi,
    I have changed laptop, and can't find the disc, with the software for the printer.
    I neew to install HP Photosmart Solution Center for Windows 7, and my printer is a 2575 All-in-One.
    Could you please send me a link to download this software.
    Thanks.
    Hanne.

    Hi, here is the link for the driver.
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • HP Solutions Center for my Windows 7 64-bit Home Premium PC?

    Hello Everyone,
    I was able to succesffuly install my HP 1400 series all-in-one printer with my Windows 7 64-bit Home Premium PC.
    However, I can not operate the scanning function or configure scanning features  of the printer, since I do not have the HP Solution Center software installled on my Windows 7Home Premum PC.
    That is the HP support link for me to download tand install the HP Solution Center
    on my Windows 7 Home Premum PC?
    Thank you.
    Best Regards,
    -Warren-
    This question was solved.
    View Solution.

    Hi Warren,
    I assume you simply plugged the printer without preinstalling any software. Please correct me otherwise.
    Please remove the existing device as following:
    Unplug the USB from the back of the printer.
    Enter Control Panel > Devices and printers
    Right click any 1400 printer icon, then click Remove Device.
    If there are several icons of your printer, repeat the same for any of them.
    Reboot your PC.
    Enter Control Panel > Devices and Printers.
    Left click once any presented printer (e.g. Fax), then click Print Server Properties on the Top bar.
    Click the Driver tab.
    If there is any 1400 listed, select it and click Remove.
    Select to remove the 2nd option. Remove printer driver and printer driver Package.
    Download and install the Full Feature Software for your printer (HP PSC 1400 Series) below:
    *Make sure not to connect the USB till prompted to do so during the install.
    http://ftp.hp.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to Download "HP Solution Center" for Deskjet 6988 on Windows 8.1

    I have a Deskjet 6988 printer and a Scanjet G3110 on Windows 8.1 and can only get the basic drivers to download for them.  I can scan and print, but  I want the HP Solution Center software downloaded so I can control making copies.  How do I do that?  Thanks for help!
    This question was solved.
    View Solution.

    Hi,
    I actually referred to the Deskjet 6988 only as I was confused by the title ;-)
    For the Scanjet G3110 you do have a full solution available.
    If the scanner is already conneted to your PC, be sure to open Devices and Printers, right click the Scanjet 3110 and select Remove Device.
    Unplug the USB and install the following software:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=dp-127945-1&cc=us&dlc=en&lc=en​...
    I'm not surwe if the HP Solution Center will be available as well or may the HP Scanning software only, however the front panel copy button will woirk once the software will be intalled.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Solution Center for Office Jet Pro K5400 on Windows 7 Home Premium 64

    When I was running Windows XP I had HP Solution Center that would allow me to view approximate ink usage and balance of ink in cartridges. Is there an HP Solution Center I can run on Windows 7 that will allow me to view approximate ink usage or balance of ink in cartridges? 
    This question was solved.
    View Solution.

    Hi Rubber_Tree,
    I see by your post that you would like to know if there is a HP Solution Software which you can run on Windows 7.
    I can help you with this issue.
    The Windows 7 drivers are preinstalled Windows drivers. Unfortunately there isn't a Full Software driver to download.
    I have provided a download the for the HP Toolbox that will work with Windows 7, which provides status and maintenance information about the printer. HP Toolbox. You may check it out.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How to download hp solution center for windows 8.1 on officejet j6480 all in one

    I would like to install HP Solutions Center on my new HP computer which has Windows 8.1.  My printer is HP Officejet J6480 all in one.

    Hi,
    Please download the following software and drivers, save on your computer (remember where) and double click the downloaded file to install:
      http://ftp.hp.com/pub/softlib/software12/COL31995/mp-109977-2/OJ_AIO_J6400_Full_Win_WW_140_408-4.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Officejet 6500 e710n Solution Center for Windows 8.1

    I originally purchased my Officejet 6500 E710n and loaded it on my Windows XP computer, no problems.  I recently purchased a new Windows 8.1 computer and wanted to use the above mentioned printer with it.  First I tried to install it on my new 8.1 PC with the setup CD that came with the Officejet 6500.  Install CD setup told me it doesn't support my new 8.1 PC.  Then went to HP downloads and downloaded latest driver software with Ful Features that supports Windows 8.1.  Software downloaded and installed on new 8.1 PC.  However, I can only see the Full Featured Solution Center the very first tisme I open up the printer.  The very first time I open it, it gives me all Full Feature options.  Then after I close the printer and open it a second time, all I have is the Basic Print Feature with no Solution Center and no Full Features.  The only way I can get it back up is to uninstall and reinstall driver, but it only works the very first time I open up the printer.
    I'm not very computer literate, but I don't understand why it works right only the first time.  I could sure use some input on solutions for this issue.  Hopefully if there is a solution it's simple for me to fix. 
    Thanks.

    As listed in my previous post, please clarify what behavior you experience once clicking the HP Officejet 6500 E710 icon to open the Printer Assistant.
    Would you see any specific screen, any specific behavior or any specific error message?
    May you see no responce at all once cliking the icon?
    Please clarify accordingly, in order to resolve an issue it will help knowing its sympthoms..
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • SOLUTION: Get Win 7 Printer Drivers/HP Solution Center to Work on Windows 8

    Took me some time to figure it out, but I got it to work.
    First of all, the preliminaries:
    I have an HP dv9700t laptop running the 64-bit version of Windows 8 Pro RTM (not the preview, but I assume it will work on Preview as well).  My printer is an HP Photosmart C7280.  If you have a different printer, it is possible that something similar to how I solved my problem will help you, especially by running your installation files in Windows 7 Compatibility Mode.
    Windows 8 does come with stock C7280 printer drivers that work by going into Control Panel>Devices and Printers>Add A Printer, but there's only limited functionality with those.  As such, I wanted to run the HP installation files to have increased functionality.
    Unfortunately, when I ran the full installation file from HP for my printer, there was no "Install a Printer" button, or any of the other usual buttons.  There was only an "Exit" button.
    Here's how to get it to run and install properly.
    Right-click on the HP Full Installation file, then Properties>Compatibility>then check the box for "Run this program in compatibility mode for:", then select "Windows 7" in the dropdown box, then Click "OK".
    Run the installation file as you normally would in Windows 7.
    I tried this two ways.....the first while connected via USB cable.  It worked just fine with no errors.
    I also tried it with the printer connected to my network via WiFi.  Ran into some problems.
    The installation program would detect my printer just fine, and I clicked "Next" or "OK" or whatever the prompt was to install the printer.  The installation would hang on "Reply from SNMP" (or something similar) and it would list the IP address of my printer.  I waited, waited, waited for an hour, and it wouldn't get past this.  Not to worry.
    Proceed with normal installation until you get to the "Reply from SNMP" message and the installation stops responding.
    Enter the Task Manager with CTRL-ALT-DEL.  You'll see an entry in the "Apps" for the HP installation program....LEAVE THIS ALONE.
    Below the "Apps" list you will see the "Background Processes" list.  In this list is something along the lines of "HP Network UI", or something similar, consuming a significant amount of CPU.  Highlight this entry, then click, "End Task" at the bottom.
    The "SNMP" window will close and your installation program will then finish normally and your printer/fax/scanner will be properly installed.  HP Solution Center works normally, as does printing, scanning, etc.
    Will the next person who uses this give some feedback and also answer some questions for me so I can update this post with more specific information?
    Please let me know what the exact "SNMP" message is when the installation hangs.  Please also let me know the exact name of the "HP Network UI" background process is, as well as the HP Installation app name.
    Hopefully this will help you.
    This question was solved.
    View Solution.

    thanks for the solution. I have an HP Photosmart D110a wireless printer. Windows 8 installed a generic printer driver that worked fine for printing but I lost all functionality to the scanner of the device. 
    I tried to follow your instructions. I do get an error at some point when the software installer tries to talk to the printer and it gives an error message. It finds the printer OK but stalls. The error message is different and merely reports that there is a problem, no further details. There is indeed a background task "HP Network UI" or similar but ending this task doesn't do anything on my system. The Network UI task ends and the error message stays open. I ended a couple more background tasks but it would not go anywhere.
    I then uninstalled the entire package, unplugged the printer, turned its wireless feature off and reinstalled the software in Windows 7 compatibility mode. When it asked to plug in the printer to the USB it finds it right away, the installation continues and is almost finished when it stalls again. This time it reports that it has a problem again and needs to uninstall. Still with the error message and installer open I open the installed "Solution Center" and I can find the printer fine (it actually lists two devices, one being grayed out). It initially gave me an error message when I tried to scan something, but ignored the error. Eventually the scanner worked as intended. I force ended all installer tasks in the task manager and the Solution Center works fine and does all tasks it did under Windows 7, now in Windows 8. 
    thanks again for the post

  • Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

    Hi folks,
    I've searched many threads and found some directions to remedy this, tried them and have had no luck.
    I'm running Windows 7.  All updates are current.  When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine.  Fast forward a year and Solution Center stopped working.
    Uninstalled all HP software to reinstall.  I was only able to reinstall HP Update.  I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center.  The installation stops abruptly after "installing updates".
    I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
    What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
    Thanks,
    Alex
    This question was solved.
    View Solution.

    Hi jerseyal,
    I hate to hear you are having issues.  What suggestions have you tried?  Did you get an error when installing?  How are you connecting the device?  Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
    If you are still experiencing the issue the steps below may help resolve it. 
    Try using the scrubber built into the software, then reinstalling from the current download available on the website. 
    From original printer installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Open My Computer, and then right click on the CD drive and chose open
    3. Open folder Util
    4. Open folder CCC
    5. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Use the following tool to clean the registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    10. Download the full feature software and drivers Driver Link
    11. Run the download to reinstall the printer
    From a download:
    1. Run disk cleanup on your computer
    2. Download and run the software and drivers below.
    3. Once the download is done extracting, cancel the download. Driver Link
    4.. Press the Windows key + R on the keyboard to bring up the run menu.
    5. Type %temp% in the run field and click OK.
    6. Look for, and open the folder starting with 7z (Example: 7zS2356)
    7. Open folder Util
    8. Open folder CCC
    9. Run the uninstall_ L4.bat for non-HP computers only.    For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
    10. When the uninstall has completed restart the computer
    11. Run Disk cleanup from Accessories\ System Tools
    12. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    13. Use the following tool to clean the system and registry.  Note: This utility is not HP sponsored or approved.  HP and I are not responsible for damages or loss of data caused by the utility.  This step is optional.   You can skip it if you want.
    http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
    14. Download the full feature software and drivers Driver link
    15. Run the download to reinstall the printer
    Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

Maybe you are looking for