Hp solution center for c6180 all in one
Why when I open the hp solution center, the make copies button and send fax button doesn't work. Further more when I try to use I have to turn the printer off then on to print ? When I check settings everything works except running a test fax. However I can fax using the menu button on the printer. very frustrating
After uninstalling the Corel PDF Fusion, have you try to uninstall HP SW and reinsatll SW again? Hope it works.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.
Similar Messages
-
Cannot install HP Photosmart Solution Center for C410a All-In-One
Computer: Dell Inspiron 15R
O/S: Windows 8.1, 64-bit
Printer: HP Photosmart Premium Fax e-All-in-One Printer C410a
This computer had a version of the HP Solution Center successfully installed in the past, but we started having problems with the computer to the point where we lost all the Microsoft Office suite. After repairing/reinstalling that, I repaired all the other Programs in the Control Panel Unstall page. However, I decided to uninstall all HP software using the Control Panel Unstall Program. I rebooted the computer and attempted to reinstall the HP Solution Center by downloading the latest software from the HP website. The software will not reinstall.
When the installer screen appears, it has 3 buttons: Install, Readme, Exit.
When I hit "Install", a popup window indicates "The system cannot find the file specified."
So, I cancel out of it and hit "Readme". A different popup window appears indicates:
Windows cannot find
'C\Users\Karen\AppData\Local\Temp\7zS3838\setup\Readme\autorun.infla...\Readme.hml'
Make sure you typed the name correctly, and then try again.
I hit "Exit" and the installation window closes.
The "\Readme\autorun.infla...\Readme.hml" message bothered me so I looked into the 7zS3838 directory. There I found the Autorun setup information file. Under the "[LaunchPad.Main.Btn2]" section is a line:
TargetPath=.\setup\Readme\%lang%\Readme.html. It seems to me the "%lang%" parameter is messed up somehow being set to some version of "autorun.infla". If "%lang%" is corupted, it seems likely that other parameters are corrupted as well indicated by the error message produced when hitting "Install".
I have tried running the Unstall_L4.bat. It seems to fail on a particular section, but then presses on to completion.
I have run a Disc Cleanup and rebooted the computer several time as well as tried this installation several times but to no avail.
I have tried installing using the PS_AIO_07_C410_140_408.exe software and it produces the same results as the Solution Center.
I even tried the original installation disc, but, when the installation screen appeared, there were no "Install" nor "Readme" buttons (only and "Exit" button).
I have looked at the log files for the Solution Center installation. It produced 12 log files: HPSLPSVC0000 - HPSLPSVC0010 and HPPIWLog. None of the HPSLPSVC log files show any errors. But, the HPPIWLog does. I'll post the as much log as I can at the end of this post. However, 2 failures stand out.
The first is:
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
The second is:
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
Well, other that the 2 errors from the log file, please let me know if you have any ideas on how the "%lang%" parameter could have been corrupted. I'm willing to dig into the registry if I have to.
Thanks in advance!
Ted
Here's the HPPIWLog:
( 3-21-2014 22:34:17:665 ):-------------- APPLICATION STARTUP --------------------
( 3-21-2014 22:34:17:665 ):Version :3.1.0.19
( 3-21-2014 22:34:17:665 )perating System : (64 Bit)
( 3-21-2014 22:34:17:665 ):-------------------------------------------------------
( 3-21-2014 22:34:18:134 )howing Invitation Screen..
( 3-21-2014 22:34:18:134 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:18:134 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:18:134 )et Aboutbox string..
( 3-21-2014 22:34:18:196 ):Window is set as foreground
( 3-21-2014 22:34:18:196 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 )howing Preparing Dialog..
( 3-21-2014 22:34:22:306 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:306 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:34:22:306 )et Aboutbox string..
( 3-21-2014 22:34:22:306 ):Window is set as foreground
( 3-21-2014 22:34:22:306 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:34:22:697 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:34:22:697 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:34:22:697 ):Call CoCreateInstance
( 3-21-2014 22:36:22:818 ):call ReregisterSLPService
( 3-21-2014 22:36:23:5 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:36:23:21 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:23:21 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:23:21 )et Aboutbox string..
( 3-21-2014 22:36:23:36 ):Window is set as foreground
( 3-21-2014 22:36:23:36 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:33:538 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:33:538 )et Aboutbox string..
( 3-21-2014 22:36:33:538 ):Window is set as foreground
( 3-21-2014 22:36:33:538 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:70 ):Thread Started..
( 3-21-2014 22:36:34:70 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:36:34:85 )LP Enumeartion.
( 3-21-2014 22:36:34:85 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:36:34:85 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:36:34:85 )et Aboutbox string..
( 3-21-2014 22:36:34:85 ):Window is set as foreground
( 3-21-2014 22:36:34:101 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:38:34:206 ):WMI Enumeartion.
( 3-21-2014 22:38:35:472 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:38:35:472 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:38:36:831 ):Inside IsKarnakDevice Method
( 3-21-2014 22:38:36:831 )evice : HP Photosmart Prem C410 series
ModelNumber : CQ521A
( 3-21-2014 22:38:36:831 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:38:38:347 ):Inside CheckForSoftware Method..
( 3-21-2014 22:38:38:347 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:38:38:347 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:38:38:347 ):Call CoCreateInstance
( 3-21-2014 22:40:38:425 ):call ReregisterSLPService
( 3-21-2014 22:40:38:487 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:40:38:487 ):ModelNumber : CQ521A
( 3-21-2014 22:40:38:487 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:40:38:487 ):Thread Terminated.!!
( 3-21-2014 22:40:38:487 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:40:38:487 ):Number of Devices Enumerated : 0
( 3-21-2014 22:40:38:487 ):No devices Connected/Installed
( 3-21-2014 22:40:38:487 ):Current Screen Id : 3
( 3-21-2014 22:40:38:503 )howing USB Connection Dialog..
( 3-21-2014 22:40:38:503 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:503 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:38:503 )et Aboutbox string..
( 3-21-2014 22:40:38:519 ):Window is set as foreground
( 3-21-2014 22:40:38:519 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:38:519 ):Inside CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:38:519 ):Returns from CUsbConnectionDlg : OnInitDialog()
( 3-21-2014 22:40:53:544 ):currentScreenId = ScreenIdNetworkDeviceSelect (2P)
( 3-21-2014 22:40:53:544 )howing Network Device Dialog..
( 3-21-2014 22:40:53:560 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:576 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:40:53:576 )et Aboutbox string..
( 3-21-2014 22:40:53:576 ):Window is set as foreground
( 3-21-2014 22:40:53:576 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:40:53:591 ):Inside NetWorkDialog : OnInitDialog()
( 3-21-2014 22:40:53:591 ):Calling NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:40:53:591 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:40:53:591 ):Call CoCreateInstance
( 3-21-2014 22:42:53:653 ):call ReregisterSLPService
( 3-21-2014 22:44:53:823 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:44:53:823 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:44:53:823 )et Aboutbox string..
( 3-21-2014 22:44:53:823 ):Window is set as foreground
( 3-21-2014 22:44:53:839 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:3:872 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:45:3:872 )et Aboutbox string..
( 3-21-2014 22:45:3:888 ):Window is set as foreground
( 3-21-2014 22:45:3:888 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:45:4:232 ):Calling sparkBL.GetLatestSoftwareAvailabilityMatrix From Network dialog
( 3-21-2014 22:45:4:232 ):Inside GetLatestSoftwareAvailabilityMatrix Method
( 3-21-2014 22:45:4:232 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:45:4:232 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:45:4:232 ):Call CoCreateInstance
( 3-21-2014 22:47:4:304 ):call ReregisterSLPService
( 3-21-2014 22:47:4:350 )LP Enumeartion.
( 3-21-2014 22:49:4:457 ):WMI Enumeartion.
( 3-21-2014 22:49:4:723 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:49:4:723 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 )et LatestSoftwareAvailabilityMatrix as devMap = m_DeviceSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:723 ):Returns from sparkBL.GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:49:4:738 ):Returns from NetWorkDialog : EnumerateNetworkDevices()
( 3-21-2014 22:49:18:6 ):currentScreenId = ScreenIdNetworkDeviceSelect
( 3-21-2014 22:49:18:6 )et Re-enumeration Flag : True.
call GetDeviceSelectionScreenId
( 3-21-2014 22:49:18:6 ):Inside CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:49:18:6 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:49:18:6 ):Call CoCreateInstance
( 3-21-2014 22:51:18:57 ):call ReregisterSLPService
( 3-21-2014 22:51:18:167 )evice Manager Enumeration - USB and Network devices
( 3-21-2014 22:51:18:182 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:18:182 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:18:182 )et Aboutbox string..
( 3-21-2014 22:51:18:198 ):Window is set as foreground
( 3-21-2014 22:51:18:198 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:247 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:262 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:262 )et Aboutbox string..
( 3-21-2014 22:51:28:278 ):Window is set as foreground
( 3-21-2014 22:51:28:278 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:590 ):Thread Started..
( 3-21-2014 22:51:28:590 ):Enumerating Modelnumber of USB Devices.
( 3-21-2014 22:51:28:590 )LP Enumeartion.
( 3-21-2014 22:51:28:606 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:51:28:606 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:51:28:606 )et Aboutbox string..
( 3-21-2014 22:51:28:622 ):Window is set as foreground
( 3-21-2014 22:51:28:622 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:53:28:710 ):WMI Enumeartion.
( 3-21-2014 22:53:28:961 )evice Manager Enumeration - Karnak enumeration
( 3-21-2014 22:53:28:976 ):Get Modelnumber of Network Karnak Device..
( 3-21-2014 22:53:29:148 ):Inside CNetworkEnum Constructor
( 3-21-2014 22:53:29:148 ):Call CoCreateInstance
( 3-21-2014 22:55:29:206 ):call ReregisterSLPService
( 3-21-2014 22:55:29:252 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:252 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:252 ):Get Modelnumber of Network SLP Device..
( 3-21-2014 22:55:29:424 ):Network Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:29:424 ):ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 )evice Details..
Name : HP Photosmart Prem C410 series
PID : 0000
ModelNumber : CQ521A
( 3-21-2014 22:55:29:424 ):Request send by PID
( 3-21-2014 22:55:29:440 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&Pid=0x0000&OS=Windows NT 6.2
( 3-21-2014 22:55:30:96 ):Error.!!Device's TYPE is NOT SUPPORTED
( 3-21-2014 22:55:30:96 ):Failed to Parse Json Object.
( 3-21-2014 22:55:30:96 ):Failed to read webserver data using PID
( 3-21-2014 22:55:30:96 ):Request send by Friendlyname
( 3-21-2014 22:55:30:96 ):Webserer Request URL : http://h20614.www2.hp.com/ediags/solutions/software?client=PIW&FriendlyName=HP Photosmart Prem C410 series&OS=Windows NT 6.2
( 3-21-2014 22:55:31:362 ):Inside CheckForSoftware Method..
( 3-21-2014 22:55:31:362 ):MsiEnumRelatedProducts Failed with Upgrade code : {CC6EF10F-6CFE-4660-85B4-4CED9EEC7B5B}
( 3-21-2014 22:55:31:362 ):Insert device details to Matrix
( 3-21-2014 22:55:31:362 ):Requet Send to Terminate Thread .!!
( 3-21-2014 22:55:31:362 ):Thread Terminated.!!
( 3-21-2014 22:55:31:362 ):Returns from CSparkBusinessLogic:repareSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:362 ):Number of Devices Enumerated : 1
( 3-21-2014 22:55:31:362 )evices Connected/Installed
( 3-21-2014 22:55:31:362 )howing Device Dialog..
( 3-21-2014 22:55:31:425 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:440 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:31:440 )et Aboutbox string..
( 3-21-2014 22:55:31:456 ):Window is set as foreground
( 3-21-2014 22:55:31:456 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:31:456 )evice Dialog :: OnInitiDialog()
( 3-21-2014 22:55:31:471 ):Calling EnumerateDevices(false)
( 3-21-2014 22:55:31:471 ):Returns from sparkBL-> GetSoftwareAvailabilityMatrix/ GetLatestSoftwareAvailabilityMatrix
( 3-21-2014 22:55:31:471 ):m_listPrinters.DeleteAllItems()
( 3-21-2014 22:55:31:471 ):Number of Devices added to List : 1
( 3-21-2014 22:55:31:471 )evices added to List
( 3-21-2014 22:55:31:471 ):Returns from EnumerateDevices..
( 3-21-2014 22:55:31:471 )etReEnumerationFlag : True
( 3-21-2014 22:55:31:487 )evices Listed..
( 3-21-2014 22:55:31:487 ):m_listPrinters.SetSelectionMark(0).
( 3-21-2014 22:55:31:487 )et iDevNdx = m_listPrinters.GetSelectionMark().
( 3-21-2014 22:55:31:487 )elected device index, iDevNdx = 0
( 3-21-2014 22:55:31:487 )elected device index changed, Now iDevNdx = 0
( 3-21-2014 22:55:31:487 ):calling sparkBL.SetDeviceMatrix(m_DeviceSoftwareAvailabilityMap[iDevNdx])
( 3-21-2014 22:55:31:487 ):Returns from sparkBL.SetDeviceMatrix()
( 3-21-2014 22:55:31:487 ):Calling Updatestatus
( 3-21-2014 22:55:31:487 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:31:487 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:31:487 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:31:487 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:31:487 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:31:487 )evice Not Installed.!!
( 3-21-2014 22:55:31:487 ):No Bad devnode
( 3-21-2014 22:55:31:487 ):No Driver Issue
( 3-21-2014 22:55:31:503 )ort Issue Found.!!
( 3-21-2014 22:55:31:503 ):Missing Driver Issue.!!
( 3-21-2014 22:55:31:503 )rint Not Installed.!!!
( 3-21-2014 22:55:31:503 )can Not Installed.!!!
( 3-21-2014 22:55:31:503 )evice has FULL Solution
( 3-21-2014 22:55:31:503 ):Calling UpdateVidPid
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:31:503 )elected Device's PID : 0
( 3-21-2014 22:55:31:503 ):Calling UpdateModelNumber
( 3-21-2014 22:55:31:503 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:31:503 ):Modelnumber : CQ521A
( 3-21-2014 22:55:31:518 )isable the sorting of devices in ListCrtl
( 3-21-2014 22:55:31:518 ):Returns from Device Dialog :: OnInitiDialog()
( 3-21-2014 22:55:38:285 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:285 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:285 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:285 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:285 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:285 )evice Not Installed.!!
( 3-21-2014 22:55:38:285 ):No Bad devnode
( 3-21-2014 22:55:38:285 ):No Driver Issue
( 3-21-2014 22:55:38:285 )ort Issue Found.!!
( 3-21-2014 22:55:38:285 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:285 )rint Not Installed.!!!
( 3-21-2014 22:55:38:285 )can Not Installed.!!!
( 3-21-2014 22:55:38:285 )evice has FULL Solution
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:301 )elected Device's PID : 0
( 3-21-2014 22:55:38:301 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:301 ):Modelnumber : CQ521A
( 3-21-2014 22:55:38:426 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:38:426 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:38:426 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:38:426 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:38:426 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:38:426 )evice Not Installed.!!
( 3-21-2014 22:55:38:426 ):No Bad devnode
( 3-21-2014 22:55:38:426 ):No Driver Issue
( 3-21-2014 22:55:38:426 )ort Issue Found.!!
( 3-21-2014 22:55:38:426 ):Missing Driver Issue.!!
( 3-21-2014 22:55:38:426 )rint Not Installed.!!!
( 3-21-2014 22:55:38:426 )can Not Installed.!!!
( 3-21-2014 22:55:38:426 )evice has FULL Solution
( 3-21-2014 22:55:38:426 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:38:426 )elected Device's PID : 0
( 3-21-2014 22:55:38:442 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:38:442 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:115 ):Extra checking added for Bad devnode
( 3-21-2014 22:55:47:115 ):Call CPrinterEnumerator::EnumerateUSBPrinters Method
( 3-21-2014 22:55:47:115 ):Return from CPrinterEnumerator::EnumerateUSBPrinters
( 3-21-2014 22:55:47:115 ):Exitting CheckBadDevnode Method
( 3-21-2014 22:55:47:115 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:115 )evice Not Installed.!!
( 3-21-2014 22:55:47:115 ):No Bad devnode
( 3-21-2014 22:55:47:115 ):No Driver Issue
( 3-21-2014 22:55:47:115 )ort Issue Found.!!
( 3-21-2014 22:55:47:115 ):Missing Driver Issue.!!
( 3-21-2014 22:55:47:115 )rint Not Installed.!!!
( 3-21-2014 22:55:47:115 )can Not Installed.!!!
( 3-21-2014 22:55:47:115 )evice has FULL Solution
( 3-21-2014 22:55:47:115 ):calling sparkBL.GetDeviceMatrix() from UpdateVidPid.
( 3-21-2014 22:55:47:115 )elected Device's PID : 0
( 3-21-2014 22:55:47:130 ):calling sparkBL.GetDeviceMatrix() from UpdateModelNumber.
( 3-21-2014 22:55:47:130 ):Modelnumber : CQ521A
( 3-21-2014 22:55:47:146 )electd Device : HP Photosmart Prem C410 series
( 3-21-2014 22:55:47:146 ):FTP URL : ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 22:55:47:146 )howing Downloading Dialog..
( 3-21-2014 22:55:47:162 ):Inside CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:162 ):called Spark::g_pMediator->RegisterNotification(m_hWnd)..
( 3-21-2014 22:55:47:162 )et Aboutbox string..
( 3-21-2014 22:55:47:193 ):Window is set as foreground
( 3-21-2014 22:55:47:193 ):Returns from CSparkDialog:nInitDialog()..
( 3-21-2014 22:55:47:209 ):-------HPPIW SOLUTION DOWNLOAD INFO------
( 3-21-2014 22:55:47:209 )olution Download Link :ftp://ftp.hp.com/pub/softlib/software12/COL34152/mp-109793-1/PS_AIO_07_C410_140_408.exe
( 3-21-2014 23:0:16:422 ):Running Processes :
( 3-21-2014 23:0:16:422 ):[System Process]
( 3-21-2014 23:0:16:422 )ystem
( 3-21-2014 23:0:16:422 ):smss.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):wininit.exe
( 3-21-2014 23:0:16:422 ):csrss.exe
( 3-21-2014 23:0:16:422 ):winlogon.exe
( 3-21-2014 23:0:16:422 ):services.exe
( 3-21-2014 23:0:16:422 ):lsass.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):dwm.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):svchost.exe
( 3-21-2014 23:0:16:422 ):RtkAudioService64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):RAVBg64.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):spoolsv.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):armsvc.exe
( 3-21-2014 23:0:16:437 ):AERTSr64.exe
( 3-21-2014 23:0:16:437 ):AppleMobileDeviceService.exe
( 3-21-2014 23:0:16:437 ):AdminService.exe
( 3-21-2014 23:0:16:437 ):mDNSResponder.exe
( 3-21-2014 23:0:16:437 )fficeclicktorun.exe
( 3-21-2014 23:0:16:437 ):dasHost.exe
( 3-21-2014 23:0:16:437 ):HeciServer.exe
( 3-21-2014 23:0:16:437 ):McSvHost.exe
( 3-21-2014 23:0:16:437 ):mfevtps.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 ):RichVideo.exe
( 3-21-2014 23:0:16:437 ):svchost.exe
( 3-21-2014 23:0:16:437 )ocketCloudService.exe
( 3-21-2014 23:0:16:437 ):WyseRemoteAccess.exe
( 3-21-2014 23:0:16:453 ):McAPExe.exe
( 3-21-2014 23:0:16:453 ):mcshield.exe
( 3-21-2014 23:0:16:453 ):mfefire.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):svchost.exe
( 3-21-2014 23:0:16:453 ):taskhostex.exe
( 3-21-2014 23:0:16:453 )ynTPEnh.exe
( 3-21-2014 23:0:16:453 ):explorer.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler.exe
( 3-21-2014 23:0:16:453 ):TabTip.exe
( 3-21-2014 23:0:16:453 ):TabTip32.exe
( 3-21-2014 23:0:16:453 ):GoogleCrashHandler64.exe
( 3-21-2014 23:0:16:453 )earchIndexer.exe
( 3-21-2014 23:0:16:453 )kyDrive.exe
( 3-21-2014 23:0:16:453 ):WmiPrvSE.exe
( 3-21-2014 23:0:16:453 ):dllhost.exe
( 3-21-2014 23:0:16:453 )ettingSyncHost.exe
( 3-21-2014 23:0:16:468 ):BtvStack.exe
( 3-21-2014 23:0:16:468 ):ActivateDesktop.exe
( 3-21-2014 23:0:16:468 ):RtkNGUI64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 ):RAVBg64.exe
( 3-21-2014 23:0:16:468 )ynTPHelper.exe
( 3-21-2014 23:0:16:468 ):igfxtray.exe
( 3-21-2014 23:0:16:468 ):igfxsrvc.exe
( 3-21-2014 23:0:16:468 ):hkcmd.exe
( 3-21-2014 23:0:16:468 ):igfxpers.exe
( 3-21-2014 23:0:16:468 ):quickset.exe
( 3-21-2014 23:0:16:468 )ellSystemDetect.exe
( 3-21-2014 23:0:16:468 )DVD10Serv.exe
( 3-21-2014 23:0:16:468 ):McUICnt.exe
( 3-21-2014 23:0:16:468 ):hppiw (9).exe
( 3-21-2014 23:0:16:468 ):hppiw.exe
( 3-21-2014 23:0:16:468 ):AbsoluteReminder.exe
( 3-21-2014 23:0:16:468 ):CLMLSvc_P2G8.exe
( 3-21-2014 23:0:16:468 ):IAStorIcon.exe
( 3-21-2014 23:0:16:468 ):IAStorDataMgrSvc.exe
( 3-21-2014 23:0:16:468 ):Jhi_service.exe
( 3-21-2014 23:0:16:484 ):WmiPrvSE.exe
(FYI - Could not post whole log due to the 50,000 character limit. No errors reported after this point)Firstly, thanks for your suggestion. I appreciate it.
Secondly, sorry it took so long to get back to you. The computer is my wife's and she been quite busy with it so I haven't had the chance to test out your suggestion.
Unfortunately, your suggestion didn't work. I tried it multiple times with no luck.
Here's some additional data.
(1) As for the "ReadMe" issue (mentioned in the initial message), the "autorun.infla..." issue looks like the first "%" in the "%lang%" string is in fact the name of the file "autorun.inf". So when "%lang%" is being printed, "autorun.inf" is being substituted for the first "%", hence "autorun.infla...".
Not sure if that helps.
(2) I tried running HP Print and Scan Doctor and I saw something unusual. The initial page shows the following:
Product Connect Software Status
Prem C410,192.168.1.7 Network(192.168.1.5) Installed
Prem C410,192.168.1.7 Network(192.168.1.7) Installed
There is ony 1 printer hooked to the network. I searched through the registry and I did find instances of "192.168.1.5" and "192.168.1.7".
(3) I also tried using the various uninstallers under util\ccc.
L1: Completed with no issues.
L2: On step 10/12, a popup window indicates "Hp Installer Uninstaller has stopped working". I click "Close Program" and that's the end of the processing.
L3: Same as L2. But, after closing the program, a pop-up window asks "Are you sure you want to remove from your computer?" (FYI - No, I did not miss anything here. That is exactly as it is printed. There seems to be 2 spaces between "remove" and "your" as if a filename or program name should go here.) I click "Yes", eventually the screen indicates 100% complete and I click "OK". This sequence happens 3 more times (pop-up followed by a 100% complete screen). After the 4th time, a screen indicates the process is complete, I hit "Finish" and the computer automatically reboots.
L4: Exactly the same as L3.
At times when step 10/12 failed, the "Current Progress" will be stopped on "Software\Wow6432\Hewlett-Packard\" followed by other registry entries. I've searched through the registry and I can find only one entry that matches this: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432\Hewlett-Packard. But, none of the entries that follow that on the "Current Progress" bar match any entries. (Ex: Software\Wow6432\Hewlett-Packard\DigitalImaging\CUE Settings. This key does not exist. There is a HKEY_CURRENT_USER\Software\Hewlett-Packard\DigitalImaging\CUE Settings, but not one tagged with the "Wow6432" entry.
Anyway, it looks like something has gone wrong with this computer's registry. I reluctant to start hacking away at the registry.
I could use some more suggestions.
Thanks!
Ted -
HP Solution Center for Photosmart 2575 All-in-One
Hi,
I have changed laptop, and can't find the disc, with the software for the printer.
I neew to install HP Photosmart Solution Center for Windows 7, and my printer is a 2575 All-in-One.
Could you please send me a link to download this software.
Thanks.
Hanne.Hi, here is the link for the driver.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
why do I have to continually redown load the driver for my c6180 all in one printer every few months
Please read this post then provide some details. What operating system? Are there any error messages on the printer or computer screen when printing fails?
Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Windows 8.1 driver for HP Photosmart C6180 All-in-One
I am trying to install the printer driver for Windows 8.1. The printer is a HP Photosmart C6180 All-in-One. However, when it gets to installing the software it errors out. So I tried just downloading the driver without all the bells and whisles and it comes back telling me it cannot find "mp-110021-2/AIO_CDA_FSW_Full_Win_WW_140_408-4.exe" bur with the URl in front of it. I have done a search and have check the ftp site given in this forum and nothing has proven to be available any longer. Does anyone know where I can get this driver from? Thanks
Hi , I see that you are experiencing issues installing the printer software. I would be happy to help you.
Perform a clean boot on the computer and turn off the Antivirus Software. How to perform a clean boot in Windows. Then run the HP Printer Install Wizard, to see if that will help to install the software.HP Printer Install Wizard. How is the printer connected? (USB/Ethernet/Wireless) If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You. -
C6180 All In One Photosmart. Software and drivers will not install on Windows 8.
C6180 All In One Photosmart
on
Windows 8 64bit
Acer Aspire V5-552PG
AMD A10- 5757M
Radeon HD 8750M dedicated
Software and drivers package will only unpack but not install.
When the unpacking bar reaches the end, it disapears without any following actions.
I have of course tried it over again many times, and I have deleted the download and redownloaded it again but the same happens every time.
Any idea on how to solve this?
Sincerly
FLFOHI FLFO:
I have done some research on your post. I have found a document with steps to help resolve the stall you're experiencing during your printer installation.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=us&dlc=en&lc...
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
ISSUE: Lenovo Solution Center update resets all Settings!
Longstanding problem continues with update to 2.0.020: When Lenovo Solution Center (LSC) updates, all Settings are reset, wiping out options to suppress certain screens and alerts. While not a functionality issue, it's very annoying to have to configure LSC all over again after evey update, so much so that some of my clients stop updating (one client called it the Lenovo Annoyance Center, and removed it entirely), so please fix this issue. Thank you.
Hope that helps,
John
ThinkPad T450s [ i7-5600U | 8GB | 1TB SSD | Full HD IPS | 802.11ac | BT | Webcam | FR | Win8.1Pro64 ]We're aware of this issue and agree it is very annoying, especially since LSC updates itself so often. LSC team tells me fixing it is a priority for an upcoming release (either 2.1 or 2.2). Sorry for this inconvenience caused by LSC.
-
Have a HP C6180 all-in-one and I can never really do printing on bot sides of paper, even when it is selected in my i Mac all in one
HI,
You should be able to just leave it on, it should have a sleep mode which it will enter after a while.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution" -
Blasted printer problems - HP Photosmart C6180 All-in-One
Bought a spanking new HP Photosmart C6180 All-in-One and installed the drivers. When running the HP Setup Assistant it had a blank list to select from.
I came across this tip from macosxhints.com
"If your system drive was set up with a case-sensitive HFS file system, HP's All-in-One installer will fail when it gets to the HP Setup Assistant -- it will ask you to "Select Device" and give you an empty list. To get the installer to work, you have to install it on a case-insensitive file system. I've confirmed this with version 7.9.1 of the PhotoSmart C6100 series and version 7.9 of the Officejet 7310 series drivers.
The solution? The only one I've found is to re-format and install on a file system that is not case sensitive. After hearing back from HP's tech support, they confirmed the problem and the solution:
Thank you for contacting HP Total Care.
The software for the Photosmart C6180 is not supported on a case sensitive partition. You will have to install the drivers on a case-insensitive partition.
I only wish they had mentioned that anywhere in the online troubleshooting section. Sigh." http://www.macosxhints.com/article.php?story=20070623004646642
Can someone point me in the direction of:
"Setting up a case-insensitive partition"
thanks!post not answered
-
Problem installing Photosmart C6180 All-In-One software
I've "googled" and found several similar installation issues but none quite match mine. When I attempt to install the All-In-One software, I receive a dialog box error "The system cannot find the file specified." The file that it is attempting to find is found in the Dialog window heading:
c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksys...
Using %temp% I am able to verify that the 7zS52C3 folder structure exists. However the ",sourcepath.setup" folder shown above is incorrect. it should be just "setup".
I've ran this install several times under different accounts, including creating a new admin account.
I've cleared all temp files, removed tsr files using msconfig as described and cannot seem to solve this issue. I even renamed the setup folder to ",sourcepath.setup" to see if this would solve the install but it failed on another file.
I am running Windows Professional x64, My HP Photosmart c6180 is connected to the network and I am able to print properly to it from my computer. I need the software primarily for "scanning to computer" functionality.
Any help is appreciated.Hello @DirkPittP,
Welcome to the HP Support Forums!
I understand that when installing your HP Photosmart C6180 All-in-One Printer on your Windows 7 64 bit computer, you are encountering a 'c:\users\Myusername\AppData\Local\Temp\7zS52C3\,sourcepath.setup\blocksysinstall.exe The system cannot find the file specified' error. I would like to assist you with this issue today.
Now in your original post, I can see that you have already attempted installing the printer on administrator accounts, clearing the temp files, running an msconfig, and renaming the folder to no avail. At this time I would like you run the following steps to see if we can get this working for you.
Step 1: Uninstall Drivers:
First, I would like you to clean up your system of any software or drivers for your HP Photosmart that may have made their way onto your system during the failed installs. Rather than running the 'normal' uninstall process, I would like you to click here to download the Microsoft Uninstaller Tool.
Once the website opens, please select the Run now button on the right hand side. Please follow through any recommended fix steps provided. When prompted, choose that you need assistance with 'uninstalling'. You will be brought to a list of populated programs from your computer. Scroll through this list until you see your HP Photosmart. Select your HP Photosmart and allow it to uninstall.
This Microsoft Tool will also check your computer for any registry corruptions. Should any system corruptions be found, this Microsoft Tool will fix those corruptions for you.
Once the uninstall has completed, please close the Microsoft Tool and proceed to the next step.
Step 2: Clear the Temp Files:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder select Ctrl + A at the same time on your keyboard to highlight everything
Select the 'delete' button on your keyboard. If you get a pop up to skip an item, just skip it.
Once the Temp folder is emptied, close the window
Right click on your Recycling Bin and select Empty Recycling Bin
Step 3: Download Drivers:
Please click here to download the latest drivers for your printer.
Once the website opens select the Download button on the top left
Allow the download to Run
Once the download has completed the installer will automatically extract
After the extraction if you get the error again for 'blocksysuserinstall.exe' take note of the temp folder 7z . . . number sequence it refers to this time around.
Step 4: Rename Temp 7z Installer package:
Click on your Start menu
In the 'search programs and files' box type %temp% and hit enter
In the Temp folder locate the 7z . . . folder that shows in there
Right click on the 7z folder and left click on 'rename'
Rename the folder to the 7z. . . to the name that the 'blocksysuserinstall.exe' points to
NOTE: Ensure that you are logged into the same User Account that the error points to: "c:\users\Myusername\AppData . . . " when you make the change to the 7z folder. There shouldn't be any 'sourcepath.setup' folders at all.
Step 5: Install Printer:
Once the 7z folder is renamed to the name the error wants than click on the 7z folder to open it
Scroll down to the bottom of the installer files
Double click on the setup.exe file at the bottom. It may show an HP logo to the left of it
An installer window should pop open
Follow through the with the onscreen instructions to reinstall your printer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
C6180 All In One Printer only prints 1 page per document after Windows 7 64 bit upgrade
I loaded the software for my Photosmart C6180 all-in-one printer as part of a computer upgrade from Windows XP to Windows 7. My printer is networked and everyone else in the house can print to this printer with no problem. However, whenever I try to print a document I only am able to print the last page of a multiple page document. I have uninstalled and reinstalled the driver/software package multiple times to no avail.
Any suggestions? Thank you.This document may offer some help:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c02002372&lc=en&product=1153494&tmp...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you. -
Downloading HP Solution Center for Windows 7 Professional 64-b
I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer. My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download. Any assistance will be appreciated.
Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues finding the installer. I would like to help.
I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
Looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you
looking for basic driver for psc all in one 2175 for XP 32 bit. Thank you Dont need all the photo suite stuff,just basic scan and print.
ThanksHi @RUkiddingme
You can download the full feature software and driver, and only install the basic driver. In the installation you should see the option for custom software. Here is the link to download the software; rw2_021_w02_enu.exe
Please let me know if this resolves the issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
Cannot download Solution Center for Off Jet 6500 Wireless since going to Windows 8.1
I get a failure message and am unable to download HP full feature software (a.k.a. the "solution center") for my HP Officejet 6500 Wireless on my Aspire E1-571-688 Laptop. The solution center was successfully downloaded when I got the laptop in August 2013. It was running fine until I upgraded from Windows 8 to 8.1.
When I discovered that the solution center would not run, I removed the printer and driver software beofre trying to reinstall. When trying to get the Solution Center back, I can't get past the download step because during download it "fails". I was able to download "drivers only" through the "add a printer" option, and I do have printing capability, however I am unable to use the scan function from the laptop (or directly from the 6500).
Weird that I can't get the scan function to work on the unit itself (I get the "no scan options" message when trying to do so) as I have confirmed mutliple times that the printer is successfully connected to the correct network.
Help please! Thank you
Geo48Geo,
Welcome to the HP Forum.
You will not have access to the full features of the printer software until you manage to install the Full Feature Software. Scanning is one of those functions.
The initial Connection to the Internet is indeed part of it -- you need a reliable, clean, consistant connection that will allow you to download the full data file. Your connection may be dropping out part way through.
You may need to upgrade your network drivers after the Upgrade to Windows 8.1 . There are other issues can can plague a system after the Upgrade, most are well documented at this point. You can check with your system's Forum to what others are saying.
Basic Drivers only are much smaller in size -- just a few MBs.
Random Thoughts..
You need to resolve the network issues so you can download the full software.
You might have a friend download the file onto his computer and transfer the file to your system using a USB stick. This does not fix your network problems but it does solve at least the issue of not being able to get a hold of the installation package.
You might try taking the computer to a friend's house -- if the issue is not within your computer's network setup, then the Upgrade may have "upset" the relationship between the computer and your home network.
Click the Kudos Thumbs-Up to say Thank You for the help." .
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur -
Fatal error during installing HP Solution Center for Deskjet F2180
Hi everyone!
During installation of HP Solution Center for Deskjet F2180 it says "fatal error" - couldn´t write the key to " \SOFTWARE" plus "MSI.GPBaseService2" error.
I tried many times to completely uninstall all this software and delete keys in regedit and reinstall it. I also respected the order: firstly install, after that connect printer. HP Digital Imagiing Monitor is working right but iťs insufficient for me. Maybe there will be some problem with permissions in Windows, who knows. I have just installed Windows 7 Professional 32-bit.
Could you help me to solve it, please? Each response pleases!
This question was solved.
View Solution.Welcome to the forums @MuzikizuM
I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Let me know the results
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!
Maybe you are looking for
-
How to uninstall Media Encoder CC in Mac OS (after Media Encoder CC 2014 is installed)
Hi, I would like to uninstall Media Encoder CC as I now have Media Encoder CC 2014 installed. It is nearly 2GB and I need the space. There isn't an uninstall shortcut as there is for most of the other CC apps? I could try dragging it all to the trash
-
hi out there i got a 20d infrered canon plus 5d 40d all work with cs2 photoshop but just got 400d canon but cs2 will not open rwa ? any help
-
Help me! I dont get to reinstall Premiere Pro CS4!
Hi, I m trying to reinstall premiere pro cs4 but it shows a screen saying: Critical errors were found in setup for Adobe Premiere Pro CS4: - Incompatible payloads already installed Please see the Setup log file for details. Click Quit to exit Setup.
-
TS5376 download file will not save for installation
As above I have been through the whole process as detailed. I did have issues uninstalling the mobile portion but got there in the end. I wnt into files and deleted anything left. Now when I ask to download file it ask to save and even though I hit s
-
Foreing key 와 Primary key 비교해서 결과 추출
안녕하세요 참조 하고 있는 테이블을 비교하고 싶어서요. A테이블의 . pk 컬럼과 B테이블의 fk. 컬럼이 서로 부모,자식으로 연결되었다고 가정하면 두 테이블을 비교해서 다른 컬럼(즉 Foreign key이 깨진것) 을 확인하고 싶어요.....간단하면서 막상 할려니 머리를 헤매네요... ( FILES.filesid 와 ITEM.itemsno)를 조인해서 한쪽에 없는 값을 리스트로 출력할려구요.. 글 수정: user541094