HP Solution Center for HP Officejet Pro L7780

I have downloaded the full driver for my HP Officejet Pro L7780 printer trying to get the HP Solution Center so that my printer will be able to scan. It didn't help. Any solutions would be greatly appreciated.

Hi there Jamesis,
Welcome to the Forums
I saw your post about the issue you are having with your installation and would like to help where I can.
1. Perform a Level 3 Uninstall using this HP Officejet Software and Driver Removal Utility. (uninstall_L3)
2. After the computer restarts, reinstall the printer by using the same driver you posted above.
Let me know if this helps, if needed, I will help you out further!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

HP Solution Center for Office Jet Pro K5400 on Windows 7 Home Premium 64

When I was running Windows XP I had HP Solution Center that would allow me to view approximate ink usage and balance of ink in cartridges. Is there an HP Solution Center I can run on Windows 7 that will allow me to view approximate ink usage or balance of ink in cartridges?
This question was solved.
View Solution.

Hi Rubber_Tree,
I see by your post that you would like to know if there is a HP Solution Software which you can run on Windows 7.
I can help you with this issue.
The Windows 7 drivers are preinstalled Windows drivers. Unfortunately there isn't a Full Software driver to download.
I have provided a download the for the HP Toolbox that will work with Windows 7, which provides status and maintenance information about the printer. HP Toolbox. You may check it out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Officejet Pro L7780 Solution Center windows 7

Good Morning,
I have been trying to install the Solution center for a new windows 7computer to run a network HP Officejet Pro L7780. The CD that came with the printer is only for XP and Vista which won't install. The installation wizard downloads and unzips a file to my temp folder but no setup program launches and I don't see a file that will install the program. I also downloaded OJProL7X00_Full_14.exe fill but can't figure out how to run it.
Thanks in advance for your help.

Hi there Jamesis,
Welcome to the Forums
I saw your post about the issue you are having with your installation and would like to help where I can.
1. Perform a Level 3 Uninstall using this HP Officejet Software and Driver Removal Utility. (uninstall_L3)
2. After the computer restarts, reinstall the printer by using the same driver you posted above.
Let me know if this helps, if needed, I will help you out further!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

HP Officejet Pro L7780 All-in-One Will Not Print Blue Ink - It Prints Pink Instead

HP Officejet Pro L7780 All-in-One -
Issue:
Blue ink will not print (It prints the color pink instead.).
Actions taken:
1. Cleaned ink heads.
2. Replaced ink cartrige.
3. Reinstalled software.
Sugestions by HP customer service:
Purchase a new printer: Because the issue is software related - not reading the blue ink cartrige.
Any suggestions or advice would be very much appreciated.
Thank you for your time!
Thank you.
Sincerely,
Ryan

The cyan portion of the printhead may be clogged. I would suggest running the diagnostics shown here. If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

HP Officejet Pro L7780 - Network Letter Nightmare!

Hello.
I'm hopin somebody can help with a problem I am having with my HP Officejet Pro L7780:
The printer is connected to my wireless network and all is well with this. The problem lies with the network letter that it assigns itself to on my PC (Windows 7 Ultimate) for the in-built card reader on the printer. It is using the same letter as a virtual cd-rom drive on my PC - and I would like to move the letter the printer uses - and not the cd-rom drive, as I have my PC setup in a way where different types of drives are grouped together. Is there some way (possibly through the Windows registry) that would allow me to change the letter of the network drive (as it seems to automatically assgn one) and keep it using that new letter rather than interfering with the cd-rom drive and denying access to it every time Windows 7 boots?
Or alternatively disabling the card reader function on the printer as I don't use it?
Thanks to anybody who can solve this - as it is driving me mad!
This question was solved.
View Solution.

I finally found a solution to this problem that works for me.
I too have an HP printer that was mapping its memory card slots to a Z: drive every time I booted my Windows 7 computer.
To change the mapping to another letter to free up the Z: letter, I placed a memory card into one of the printer memory card slots. I then disconnected the Z: drive from the printer mapping (right click the Z: drive in Windows Explorer and choose the Disconnect option).
I then used the "Map network drive " option on Windows Explorer toolbar to map the printer memory card slot to another drive letter. You have to know the network address (or name) for the printer to do this: \\[printer network address or name]\memory_card (e.g.: \\192.168.1.108\memory_card). This address goes in the "Folder" textbox of the Map dialog window. Make sure the "Reconnect at logon" option is checked. And make sure you select a new drive letter that won't be needed for anything else later. Then click "Finish."
After I did this, the printer has continued to use the new drive letter at boot-up instead of Z:, leaving Z: free for other applications.
I don't think the above works if there is no memory card in one of the printer memory card slot.

HP Officejet Pro L7780 ink cartridges leaking

The printer says I need to replace cartridges even though I already did. I discovered the ink is running throughout the printer, over the mother board and out the power supply connection. Has any one else had this problem?

Hi WelcomeCenter,
Thank you for visiting the HP Support Forums. Since this is a duplicate post I'm going to lock this one, please check your other post here for replies:
HP Officejet Pro L7780
Thanks!
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

HP Officejet Pro L7780 - Registration Problem

I downloaded and installed the full software for the HP Officejet Pro L7780. When the software asks to be registered and I put in the printer and the search comes back 0. I have tried the name and the product number and still keep getting the same result 0. When I hit enter, the registration goes away and I have this running on my computer. I can't seem to get it to complete. Please tell me there is a simply solution to this. Thanks
This question was solved.
View Solution.

I fixed the problem by terminating the process and everything is right with the world.

HP Officejet Pro L7780 All-in-One Printer & Verizon D-Link wireless router. will not connect

I have a HP Officejet Pro L7780 All-in-one and not able to get it to connect to my Wireless Verizon D-Link Router.
Please advise.
aileensnider

Let's start here.
Printer does not maintain wireless connection.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&tmp_task=solveCategory&cc=us&dlc=en&la...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HP Officejet Pro L7780 won't print individual pages of a file

I have a HP Officejet Pro L7780 setup with wireless printing on my network and am using Windows 7 on a 64-bit computer with MSWord 2007. I'm trying to duplex print just specific corrected pages (like pages 7-8) from a file (of pages 1-22) and my printer just won't do it. When I select to print specific pages, the printer just sits there and then the print queue is apparently dumped, as the tray icon just disappears. The printer will print only all pages of a file or nothing at all. What could be the reason for this and how do I correct it? Thanks, Patricia

Hello tdhoobyar,
Please click here to access the troubleshooting steps that should resolve the issue.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

OfficeJet Pro L7780 - Have to Restart Print Spooler every job I print (Windows 7 32-bit)

I have an OfficeJet Pro L7780 that shows as offline in Devices and Printers constantly. I discovered if I queue up print jobs to it and then restart the print spooler all of the jobs will come out perfectly then the printer will instantly go offline. Here is what I've done for troubleshooting already:
Upgrade to newest firmware (R2011NxNxeN0)
Factory Reset by hold # and 3 at boot
Changed Ink and Print Heads
Installed newest 14.0 driver (tried both Basic and IT Pro Driver)
Rebooted and restarted printer and computer
Tried all this on a 2nd Windows 7 computer with the same results
Anyone actually use this printer on Windows 7 32-bit over the wired network port!!?!
This question was solved.
View Solution.

Same printer, same problem, same remediation by restarting Printer Spooler service. Only difference is OS is Win 7 Ultimate 64-bit.
FYI- I'm using my L7780 via a wifi connection using WPA2 security and a static IP and network RAW printing to port 9100. The printer always appears available via network pings but not to the print spooler. As such, printer is always "grayed out" and disabled but will accept jobs into its queue.
After endless searching this is what appears to be working as a fix: Turn off SNMP on printer port.
Printer Properties -> Ports Tab -> (Select Port) -> Configure Port -> uncheck "SNMP Status Enabled"
Hopefully this works for others- but I also found mention that others found a fix in toggling other settings such as "Enable bidirection printing" check box. Who knows what seemingly unrelated software triggers this issue but it began one strange day and drove me crazy.

Duplex Printing Problem - Word 2007, Vista and HP Officejet Pro L7780

I'm having trouble with duplex printing on my new HP Officejet Pro L7780, from Word 2007, running on a brand new Vista system. I've also had this same problem (repeatable) with two other computers, running XP Professional/Word 2003, XP Home/Word 2003. All of the service packs have been installed for the operating system, word, and printer.
If you print a landscape document, using the auto duplex setting for the HP printer, the margins will print out offset by .25 inches, on the left and rigt margins. So if your margin is 1 inches on right and left, the margins will print to .75 on one side and 1.25 on the other. This would be annoying, except that I'm trying to print brochures and books, which requires that the pages print out exactly as set up... "close enough" isn't working for me
The way I have replicated this problem is as follows: set up a document in landscape format, using the default margins. Insert an image on page one, size it so it takes the full margin area. On the second page, fill it up with text. Print the document, selecting the printer properties and setting Print on Both Sides=Automatic. The easiest way see the problem is by holding the document up to the light. The front and back margins should match and they don't.
Any help you can provide would be very much appreciated.
Diana

Diana,
This problem is perhaps much larger than you might have imagined. We have tried to work with Hewlett Packard for over two years on the duplex printing problems. In the process, we have expended over 100 hours of effort in troubleshooting the problem which has included updating software, reinstalling software, developing test documents, escalating issues, submitting technical findings, and in purchasing replacements. Unfortunately, our efforts to interact with Hewlett Packard excalated support have resulted in an aire of apathy, disinterest, incompetence, frustration, redundancy, occasional discourtesy, and an outright lack of professional decorum - something inconceivable of a large, reputable company.
We have identified several problems with duplex printing. The duplex printing problems include irregular margin increases (.25 to .50 inch), margin shifts, cut-off text, compressed text, and compressed graphics. Please note that most of these problems are only evident when printing documents from computer applications to the printer. If the user simply uses the front printer panel to copy in duplex mode, these problems are not always evident. This suggests that the printer mechanics are capable of properly duplexing and that the problem lies in the drivers.
The problem is evident on the HP OfficeJet Pro L7780, Photosmart L7180, Photosmart C6150, Photosmart 3310, and likely on many, many other HP models. The problem is evident on many computers (HP, IBM, Toshiba, and Dell), is evident in multiple applicatons (Word, Wordperfect, Excel, Peachtree, Notepad, and many more), and is evident on multiple operating systems (Windows XP Home, Windows XP Professional, Windows XP Media Center Edition, and Microsoft Vista).
We consider ourselves to be extremely polite, patient individuals, but have nearly been driven to outrage by the indignant disregard offered us by HP's escalation support department; a department which should represent the cream-of-the-crop in both service and technical expertise. Given the ease with which the problem can be duplicated, we expected an extremely quick resolution by HP who, to our knowledge, has never even made the effort to duplicate the problem in-house on our behalf.
Ironically, HP highly advertises their J.D. Powers rated technical support, yet it appears that they actually have extremely poor published consumer rankings in some of today's mainstream computer magazines. HP technical support makes no apologies for the fact the user cannot use a major feature of their printers, offers no indication that the problem is even being addressed, and off-loads the responsibility by suggesting that we contact Microsoft (who is to blame for this issue).
Thank you, Diane, for your message. We had a hard time imagining that we were the only one experiencing this problem, especially when HP promotes such a representation. Which also begs the question why HP plays like the problem does not even exist? I also fail to understand why HP technical support shows so little interest in a problem that is easily duplicated and adversely affects a major feature of the printer which is commonly used by individuals purchasing equipment for its duplex capabilities.
This is sad because we have been a loyal customer of HP for over twenty-five years. There was a time when we would have happily endorsed HP's steller products and steller support (provided you could get a problem escalated). Now, however, they all-too-often appear to offer equipment that fails to support advertised features which is backed up by sub-standard support and extremely expensive ink. This is an especially sad commentary for users who are buying HP's upper-end printers and computers.
We desire to know if there are others out there experiencing similar problems? If you have experienced these problems or would like samples of the problems we have duplicated, please respond. I think the more information we gather, the better our chance of a successful resolution to a serious problem.
Thanks Everyone!

I have a deskjet D1420 and officejet pro L7780 neither print back to front

I have a HP deskjet D1420 and a HP Officejet Pro L7780 and neither one will print the pages from the back to the front. The option to print back to front has been selected on both printers.
i.e. printing 2 pages and the last page prints first followed by the first page
Any help in resolving this issue will be greatly appreciated. Thanks

Please read this post then provide some details. What operating system?
I do not think the D1420 has an automatic duplexer, but the L7780 should be able to be configured for this. See the Vista/Windows 7 Duplex Printing Troubleshooting Guide here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Downloading HP Solution Center for Windows 7 Professional 64-b

I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer. My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download. Any assistance will be appreciated.

Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues finding the installer. I would like to help.
I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

OfficeJet Pro L7780 won't scan in PDF format

I have an OfficeJet Pro L7780 that HP sent me after giving up on fixing a 7310xi. I installed the software an received a "fatal error" message about error code 2203. It went ahead and installed OK - I thought. I even went to www.hp.com/support and searched for that error code. From what I gathered, it had something to do with registering it....so I didn't download their fix. After the installation finished, I went into the scan settings because I do scan quite a bit. I discovered that the PDF file option was not listed in the document scan settings. Only BMP, JPG, TIF, PNG, PCX and FPX are listed, which are, indeed, the file types that are available in the picture scan settings. It's as though the software loaded the same file types in both the document and picture scan settings.
I'm wondering now if the fatal error message actually related to this problem.
Any advice....short of uninstalling the entire package and starting over again?
Thanks....
This question was solved.
View Solution.

DexterM,
Thanks for the speedy reply.
Yes, I do have Adobe Acrobat installed on my PC (It's a new Dell with all the bells and whistles). The error message was short and sweet, as I described in my original post.
Since posting that message, I have, in fact, uninstalled and reinstalled the software on my PC - same results. The only file types available in the scan document setup are the same ones in the scan picture setup. Also, the second time I installed it, I did not get that fatal error message. Lastly, I've installed the same software on three laptops in my house (all networked) and got the same results (no PDF file option in the scan document setup).
I'm stumped and I really dread talking to Mumbai to try to resolve this.
Bill

Officejet Pro L7780 printhead error

I have an Officejet Pro L7780 All-in-One. Recently it does not work due to a printhead error (M/C printhead missing or damaged). Please help. Many thanks.
This question was solved.
View Solution.

Hi,
Use the following link to perform the troubleshooting steps.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01446637&cc=us&lc=en&dlc=en&product=2512010&tmp...
If you still recieve the error message after performing the troubleshooting steps mentioned in the document, then try the printhead cleaning from the printer menu.
Setup Menu--Tools--Clean Printhead
Setup Menu--Tools--Align Printer.
If none of these help then try this reset....this reset will restore the printer to its original factory settings & will erase all settings on the printer.
Unplug the power chord from the back of the printer while the printer is still ON.
Now press and hold "# & 9" keys on the printer, and connect the power chord while holding down the 2 keys. Wait for approx. 10 seconds and then release the keys.
If the printer powers off automatically, then wait for 10secs. and then turn ON the printer using the Power button on the printer.
Hope this helps.
Although I am an HP employee, I am speaking for myself and not for HP.

HP Solution Center for HP Officejet Pro L7780

Similar Messages

Maybe you are looking for