HP Solution Center for Photosmart 2575 All-in-One

Hi,
I have changed laptop, and can't find the disc, with the software for the printer.
I neew to install HP Photosmart Solution Center for Windows 7, and my printer is a 2575 All-in-One.
Could you please send me a link to download this software.
Thanks.
Hanne.

Hi, here is the link for the driver.
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

Similar Messages

HP PhotoSmart 2575 All-In-One Driver/Software Install Issue - Windows 8.1

Hi
I've just bought a new Sony Viao with Windows 8.1 (64 bit) installed.
I'm trying to install my HP PhotoSmart 2575 All-In-One so downloaded the driver and software installer from here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-110159-1&cc=uk&dlc=en&lc=en...
The file downloaded fine on to my desktop, i double click it and then the Exctracting... thing moves along to 100% then goes off the screen. Then nothing happens. I was expecting some software for the printing and scanning to be installed or some further install files to be added to my desktop.
What do i do next?
Matt

Hi Matt,
Thank you for updating me. I can definitely understand the frustration you must be feeling, especially when things seemed to be going great then it changed.
I have 2 documents to follow next. First, please try the steps in the document titled "Software Installation Stops Without Warning and With No Error Message". When you get to "Step three: Install the Software", it references HP SmartInstall. Please don't worry about using that program as it's specific to some of HP's LaserJet printers. Please use the HP's Printer Install Wizard instead of HP's SmartInstall.
If that document doesn't resolve the issue then please proceed onto the 2nd document titled "The Progress Bar on the Software Installation Stops or Stalls".
Please let me know how it goes. I want to ensure we have your printer installed and working.
Software Installation Stops Without Warning and With No Error Message
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02018709
The Progress Bar on the Software Installation Stops or Stalls
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00836418
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Solution center for Photosmart D110

My Solution Center quit working today. I have reinstalled Full Solution software, but this did not help. Can't check ink levels or scan without the Solution center.

Hi pught,
Welcome to the HP Forums.
I see that you are having an issue with opening the HP Solution Center.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Photosmart 2575 all-in-one,does not print, the paper rolls too far, jam message

When I try to print or copy, the printer takes a sheet but it doesn't stop where it normally stops to start printing. After that nothing happens, only got a jam message

Hello Mr. Wilks,
I am sorry to read about the issue you are having with your new Photosmart 6520 not picking up 4x6 paper. I understand you have cleaned the rollers and that did not resolve the problem. I have researched this and have found a couple of documents that I recommend you look at to ensure all of the print settings are correct when printing on a 4x6 or any other size you wish to print on.
I am unsure if you have a Windows or a Mac computer, therefore I will post 2 different links for you to look at depending on which operating system you have.
Here is the document for troubleshooting on Windows: Printing Photos Saved on Your Windows Computer
Here is the document for troubleshooting on a Mac: Print Photos Saved on Your Computer (Mac)
I really hope this helps you, feel free to respond if there is anything else I can help with!
Regards,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Control Center for HP 4620 all-in-one no longer works

It will not launch. I have tried uninstalling multiple times. I have cleaned everything from the registry and anything remotely resembling the printer from my hard drive. I then re-installed. Printer works fine but icon to launch Control Center does not launch. No error messages. I tried upping my user permissions and disabling the virus protection and firewall. Nothing. It's like Control Center is not installed but I selected full install of the software.
This question was solved.
View Solution.

Hi,
Try installing the patch below, although it described differently, I believe that may help resolving your issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03640384&cc=il&dlc=en&lc=en
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Could I have help to scan with HP Photosmart 2575 All-in-One

I have recently bought a Mac laptop and tried printing via the USB cable, which has been fine, but I wanted to scan something recently and it didn't work. I have lost the original CD that came with the printer.
I am not sure if I need to download a driver or software, or whether it is already installed on the Mac, or whether its related to something else?
Any help would be much appreciated. Thank you.

emcormie wrote:>
I am not sure if I need to download a driver or software, or whether it is already installed on the Mac, or whether its related to something else?
According to http://support.apple.com/kb/HT3669, the driver should already be included with Snow Leopard. You could download the driver from HP just to make sure yours is current, but how is scanning not working?

Problem with installing Solution Center for a HP Photosmart Premium All-in-One Printer - C309g

Hi folks,
I've searched many threads and found some directions to remedy this, tried them and have had no luck.
I'm running Windows 7. All updates are current. When I bought the printer I installed the software (on Windows 7 OS) from the disc and everything was fine. Fast forward a year and Solution Center stopped working.
Uninstalled all HP software to reinstall. I was only able to reinstall HP Update. I was able to load the basic drivers for print and scan, but not the entire software suite including Solution Center. The installation stops abruptly after "installing updates".
I even downloaded and tried "PS_AIO_06_C309g-m_USW_Full_Win_enu_140_175" and got the same result as the original installation disc.
What can I do with my printer (HP Photosmart Premium All-in-One Printer - C309g)???
Thanks,
Alex
This question was solved.
View Solution.

Hi jerseyal,
I hate to hear you are having issues. What suggestions have you tried? Did you get an error when installing? How are you connecting the device? Before completing the below steps run the print and scan doctor to see what it indicates and if the issue is resolvable through that tool(click + beside utility diagnostic tools, then download beside print and scan doctor). Click Here
If you are still experiencing the issue the steps below may help resolve it.
Try using the scrubber built into the software, then reinstalling from the current download available on the website.
From original printer installation CD:
1. Insert CD into drive, and then cancel the installer
2. Open My Computer, and then right click on the CD drive and chose open
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
9. Use the following tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
10. Download the full feature software and drivers Driver Link
11. Run the download to reinstall the printer
From a download:
1. Run disk cleanup on your computer
2. Download and run the software and drivers below.
3. Once the download is done extracting, cancel the download. Driver Link
4.. Press the Windows key + R on the keyboard to bring up the run menu.
5. Type %temp% in the run field and click OK.
6. Look for, and open the folder starting with 7z (Example: 7zS2356)
7. Open folder Util
8. Open folder CCC
9. Run the uninstall_ L4.bat for non-HP computers only.   For HP computers run the Uninstall_L3.bat NOTE: Performing level 4 uninstall on HP computer will negatively affect operating system functionality-HP and I are not responsible for damages or loss of data caused.
10. When the uninstall has completed restart the computer
11. Run Disk cleanup from Accessories\ System Tools
12. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
13. Use the following tool to clean the system and registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damages or loss of data caused by the utility. This step is optional.   You can skip it if you want.
http://download.cnet.com/Advanced-SystemCare/3000-2086_4-10407614.html?part=dl-6271865&subj=dl&tag=b...
14. Download the full feature software and drivers Driver link
15. Run the download to reinstall the printer
Note: Depending on type of security software it may need to be disabled when re-installing unit. Also make sure the Adobe flash player is up to date.
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Installing HP Solution Center for HP Photosmart C6380 in Windows 7

Installing HP Solution Center for HP Photosmart C6380 in Windows 7
After this scanner/printer has loaded down the Driver - Product Installation Service the next step of downloading software is interrupted by the notice/instruction "The system cannot find the file specified" identified as
C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
Then the Driver - Product Installation Service is once again downloaded and when that issue is successfully completed, then, once again, the next download is interrupted by
the notice/instruction "The system cannot find the file specified" identified as
C:\Users\Owner\Appdata\Local\Temp\7zS2780\Setup\.\Setup\blocksysuserins...
and the process continues in an infinite loop.
That means that my HP Photosmart C6380 in Windows 7 will be useless during an infinite time.

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Looking for Print Server for HP Photosmart C4483 All-in-One Printer

I am looking for Print Servers that I can use with 'HP Photosmart C4483 All-in-One Printer' for both 'Printing and Scanning'. I'm not sure if this Printer is Network Ready or Network Capable, kindly advice.

Hello Merole
As I understand it you can print color everywhere but from MS Word 2013? If this is the case try the steps I have outlined below to see if they resolve your issue:
On the View tab, in the Color/Grayscale group, click Black and White.
On the Black and White tab, in the Change Selected Object group, click the settings that you want.
I hope this helps resolve your printing issue. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hello Everyone, I just bought a HP Photosmart Premium All-in-One Printer - C309g but i find it very difficult to connect to it via BLUETOOTH and WIRELESS on my IPAD 3...i will be very greatfull if i'll get a solution as soon as possible. Thanks

Hi Tomiwa,
You cannot print from the iPad to that printer. AirPrint and Bluetooth are completely different.
There may be apps you can buy that will enable using that printer, but that is not an ideal solution.
That particular printer has had many bad reviews, and is unreasonably expensive for its features. Considering that you just bought the printer, as well as its lack of AirPrint, I suggest you return it and buy a printer that supports AirPrint.

Fatal error during installing HP Solution Center for Deskjet F2180

Hi everyone!
During installation of HP Solution Center for Deskjet F2180 it says "fatal error" - couldn´t write the key to " \SOFTWARE" plus "MSI.GPBaseService2" error.
I tried many times to completely uninstall all this software and delete keys in regedit and reinstall it. I also respected the order: firstly install, after that connect printer. HP Digital Imagiing Monitor is working right but iťs insufficient for me. Maybe there will be some problem with permissions in Windows, who knows. I have just installed Windows 7 Professional 32-bit.
Could you help me to solve it, please? Each response pleases!
This question was solved.
View Solution.

Welcome to the forums @MuzikizuM
I read your post about the installation error you are seeing for our Deskjet F2180. I would suggest trying out the steps in the guide below. Hopefully this will allow you to install the printer successfully!
A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows
Let me know the results
Have a great day!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Downloading HP Solution Center for Windows 7 Professional 64-b

I mistakenly uninstalled the HP Solution Center for my HP Officejet pro L7680 All-in-one printer. My operating system is Windows 7 Professional 64-bit. I've been unable to locate a reliable download. Any assistance will be appreciated.

Hello love2travel1960 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues finding the installer. I would like to help.
I would recommend downloading and installing the HP Officejet Pro Full Feature Software and Drivers.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have a hp photosmart c4795 all in one printer and i need the driver and software for vista os.

install is for a gateway laptop NV5214U. I did asearch on hp website but it responded the it could not find any drivers for the hp photosmart C4795 series all-in one printer.HELP

Ok from here: http://support.hp.com/us-en/product/HP-Photosmart-C4700-All-in-One-Printer-series/3794613/model/3940...
First, select your operating system Microsoft Windows Vista (64-bit).
Click Submit.
Click the blue Download button.
Click Next, then follow the prompts for the HP Download and Install Assistant.
Let me know if you need any more help or if this solves your problem!
Thanks,
-hjs_19 *I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos Thumbs Up" on the bottom right of this post to say "Thanks" for helping!

What is the correct wpa for hp photosmart 5514e all in one printer b 111h

What is the correct WPA for HP Photosmart 5514e All in one Printer B111h

Hi,
The correct WPA one is the one only you (or relatives/friends) know. You may forget therefore you have to logon to you wireless router to find out.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Cannot download Solution Center for Off Jet 6500 Wireless since going to Windows 8.1

I get a failure message and am unable to download HP full feature software (a.k.a. the "solution center") for my HP Officejet 6500 Wireless on my Aspire E1-571-688 Laptop. The solution center was successfully downloaded when I got the laptop in August 2013. It was running fine until I upgraded from Windows 8 to 8.1.
When I discovered that the solution center would not run, I removed the printer and driver software beofre trying to reinstall. When trying to get the Solution Center back, I can't get past the download step because during download it "fails". I was able to download "drivers only" through the "add a printer" option, and I do have printing capability, however I am unable to use the scan function from the laptop (or directly from the 6500).
Weird that I can't get the scan function to work on the unit itself (I get the "no scan options" message when trying to do so) as I have confirmed mutliple times that the printer is successfully connected to the correct network.
Help please! Thank you
Geo48

Geo,
Welcome to the HP Forum.
You will not have access to the full features of the printer software until you manage to install the Full Feature Software. Scanning is one of those functions.
The initial Connection to the Internet is indeed part of it -- you need a reliable, clean, consistant connection that will allow you to download the full data file. Your connection may be dropping out part way through.
You may need to upgrade your network drivers after the Upgrade to Windows 8.1 . There are other issues can can plague a system after the Upgrade, most are well documented at this point. You can check with your system's Forum to what others are saying.
Basic Drivers only are much smaller in size -- just a few MBs.
Random Thoughts..
You need to resolve the network issues so you can download the full software.
You might have a friend download the file onto his computer and transfer the file to your system using a USB stick. This does not fix your network problems but it does solve at least the issue of not being able to get a hold of the installation package.
You might try taking the computer to a friend's house -- if the issue is not within your computer's network setup, then the Upgrade may have "upset" the relationship between the computer and your home network.
Click the Kudos Thumbs-Up to say Thank You for the help." .
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

HP Solution Center for Photosmart 2575 All-in-One

Similar Messages

Maybe you are looking for