HP Solutions Center for my Windows 7 64-bit Home Premium PC?

Hello Everyone,
I was able to succesffuly install my HP 1400 series all-in-one printer with my Windows 7 64-bit Home Premium PC.
However, I can not operate the scanning function or configure scanning features of the printer, since I do not have the HP Solution Center software installled on my Windows 7Home Premum PC.
That is the HP support link for me to download tand install the HP Solution Center
on my Windows 7 Home Premum PC?
Thank you.
Best Regards,
-Warren-
This question was solved.
View Solution.

Hi Warren,
I assume you simply plugged the printer without preinstalling any software. Please correct me otherwise.
Please remove the existing device as following:
Unplug the USB from the back of the printer.
Enter Control Panel > Devices and printers
Right click any 1400 printer icon, then click Remove Device.
If there are several icons of your printer, repeat the same for any of them.
Reboot your PC.
Enter Control Panel > Devices and Printers.
Left click once any presented printer (e.g. Fax), then click Print Server Properties on the Top bar.
Click the Driver tab.
If there is any 1400 listed, select it and click Remove.
Select to remove the 2nd option. Remove printer driver and printer driver Package.
Download and install the Full Feature Software for your printer (HP PSC 1400 Series) below:
*Make sure not to connect the USB till prompted to do so during the install.
http://ftp.hp.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?

Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!

Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!

Windows 7 64-Bit Home Premium SP Question

I noticed in applying new updates to a fresh installation of Windows 7 64-Bit Home Premium that Service Pack 1 kept getting offered to me again and again in Windows/Microsoft Update even though I was selecting to install it every time. Is this because
I had not yet installed a prerequisite update? It eventually stopped offering me SP1 when finished installing other items.

Hi edwardlm2010,
Do you mean you have get rid of this issue now?
Here is an article describe this issue:
Windows Update or Microsoft Update repeatedly offers the same update
http://support.microsoft.com/kb/910339
This may happen if the update isn’t installed correctly the first time, or if your Windows Update settings can't detect the update.
Alex Zhao
TechNet Community Support

TS3212 running windows 7 64 bit home premium edition, getting installer error when attempting to download itunes

I'm running windows 7 64 bit home premium edition, getting installer error whenever I attempt to download iTunes. Cannot resolve despite every attempt known to man! Help!

I'm having the same problem and this is my error message:
what do I do?

My Mouse pad alway error ( Stop Working ) when I use firefox browser ! I Try To Reinstall Firefox And Reinstall my OS but it Can not helps ! My Computer Is : Dell Vostro V 130 , Windows 7 64-bit Home Premium !! Pls Help Me !!

My Mose Pad Has Stop Working ! But My external mouse ( laser Mouse ) can work , i try to install other version of firefox ( thunder bird, aurora) but it still the same , even if I reinstall my windows ( my OS is Windows 64-bit Home Premium ) My Computer is Dell Vostro V130.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

Unable to Install QTP 10 - in Windows 7 - 64 Bit - Home Premium

Hi Team,
While am trying to install QTP 10 in Windows 7, 64 bit Machine an issue is observed, "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package"
Please assist in resolving the same
Regards
Omprakash

Hi Chirs , sorry for the trouble you are facing. We would like you to be up and running in the language of your choice and not choose the workaround. I have a solution , see if this works for you
Inside the installer folder [either from dvd or a local folder or a extracted location], you can find a folder called "payloads".
      1) Inside that, you can find some folders with their names starting with "Microsoft_".
      2) Amongst such folders, you should find 3 folders which also end with "_x86_x64".
      3) Go into each of these 3 folders and try running the "msi" files manually by double clicking them. In the options screens, select "modify" and keep clicking next till you finish.
Before the workaround .. you have uninstall Captivate 5 and after the workaround re-install captivate in German and this should solve.
if not , I can set up a meeting with you and try and help resolving this issue.
We deeply appreciate your interest shown towards Captivate 5
Thanks
SURESH J

Multiple failures after updates Windows 7 64 bit Home Premium

After loading the latest set of updates for my Windows 7 Home Premium 64 bit operating system and rebooting, I am now experiencing a cascade of failures. None of my network (wireless or ethernet) adapter or miniport drivers
will load. my firewall will not load or has failed. I cannot logon to my Event Viewer to figure out what failed and my Microsoft NET is giving me errors when I try to access anything that might help me figure out what went wrong. So far I
have done a system restore back to before the update, but it did not fix the problems. I have tried to use Microsoft Fix it, but that must access the internet. I am sending this from a different computer because I cannot get online with the other.
Can anyone give me a clue where to start fixing these problems or do I have to completely reinstall my operating system?
Thanks.

Hi,
In this case, you can try repairing windows image using DISM command.
http://technet.microsoft.com/en-us/library/hh824869.aspx
If it still can't work, please make a repair install to fix your system.
http://support.microsoft.com/kb/2255099
Andy Altmann
TechNet Community Support

Windows 7 64 bit home premium desktop Pavilion Elite150f

At present I am using a Pavilion Elite HPE-150f desktop, windows 7 home premium 64bit, I use Microsoft works Task Launcher a lot of the time and it came pre installed on my desktop.
Now I have purchased a new HP Envy 700-019 windows 8 64 bit desktop, still in the box and not set up yet, is there any way I can install Microsoft works task Launcher onto my new desktop without a disc. I have the recovery discs but no disc just for Microsoft works task Launcher.

you can put MS works on your windows 8 system. you just need a MS works disc.
like these
This country, with its institutions, belongs to the people who inhabit it. Whenever they shall grow weary of the existing government, they can exercise their constitutional right of amending it, or exercise their revolutionary right to overthrow it.
Abraham Lincoln

After Effects CS6 (11.0.4.2) Not Recognizing Installed RAM Windows 7 64-Bit (Home Premium)

I'm having the same issue in Photoshop CS6 (13.0.1 x64).
I had been running my system on 16GB of RAM and recently upgraded to 32GB. My system diagnostics show 32GB of RAM actively installed and running, but when I open the system preferences in either PS or AE it shows only 16-ish available RAM. Why don't I have access to all 32GB (or close to it)?
I'm including screen shots of the Preferences Windows in both PS and AE. Any help would be much appreciated. Both applications are currently updated as of this morning.

I have answered my own question. And as embarrassing as it is. I'll leave it up in case someone else is looking for the same answer.
Windows 7 Home Premium only supports up to 16 GB of RAM. I had to buy the Professional version in order to access all 32 GB of the installed RAM.
It's a pretty silly mistake to make, but there you have it.

After upgrading to FireFox 7 on Windows 7 64-bit Home Premium, I can't load the games in Google Plus.

Long time user of Firefox, but recently I've been having problem. After upgrading to FireFox 7 on my laptop with Windows 7 Home Premium (64-bit), none of the game in Google+ will load. One game pop up a screen saying cookie acceptance is disabled even though it is enabled. One game just won't load at all, but will not give any error message. I installed Adobe Flash as well, still not working. Previous version of firefox works fine without a problem. Also, I recently reinstall Windows and fresh copy of Firefox 7, still the same problem.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Touch screen doesn't work after Vista Home64-bit upgrade to Windows 7 64-bit Home Premium on IQ506

Hello, right before I upgraded to Win7, I made sure that the Touchsmart software worked and that the touch screen itself worked. As soon as I performed the upgrade (not the clean upgrade that wipes all your existing data, but rather the upgrade that carries over your applications and files), the touch screen ceased to work.
I didn't panic, thinking that I probably had to run some windows/hp updates, which I did to no avail. I also manually updated ALL the driver/software files found at this link http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us〈=en&product=3752245
Yup, every single one. As a last resort, I tried some of the HP troubleshooting for touch screens not working. It said to shut down the computer, pull the plug on the computer, hold the power button for 5 seconds, plug the computer back in, and boot it up again. Didn't help at all.
I'm at the end of my rope and there is no additional HP support on this. I'm waiting for a reliable driver update for win7 for this **bleep** touch screen. I'm dead in the water -- I've got a touchscreen computer whose touchscreen doesn't work! Someone else out there must be having this problem! Any leads?

Did you try installing the Touch Driver?
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=4063&lc=en&dlc=en&cc=us&product=3752245&lang=en
Driver
Date
Version
Previous
Size
» NextWindow Multi-Touch Device Driver Update
11-2009
1.3.0.2
2.83M

T420 Intel i7 with Windows 7 64 Bit Home Premium Laptop Shutting down Unexpectedly and Restarting

Hi ,
I purchased the Lenovo Think Pad T420 in May 2011, I am facing the problem windows unexpectedly shutting down and restarting. Can anyone suggest me whether any SP needs to be applied or what is causing the issue. Please find the error message i got below.
Problem signature:
Problem Event Name:                        BlueScreen
OS Version:                                          6.1.7601.2.1.0.768.3
Locale ID:                                             1033
Additional information about the problem:
BCCode:                                               116
BCP1:                                                    FFFFFA8008F0E010
BCP2:                                                    FFFFF880082458F0
BCP3:                                                    0000000000000000
BCP4:                                                    000000000000000D
OS Version:                                          6_1_7601
Service Pack:                                       1_0
Product:                                               768_1
Files that help describe the problem:
C:\Windows\Minidump\030812-25880-01.dmp
C:\Users\Home\AppData\Local\Temp\WER-65582-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

As you are facing issue with Bluescreen, kindly update the windows and also update the Bios of your Notebook from the below mentioned web link.
http://support.lenovo.com/en_US/downloads/default.page?
Now please check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

PSE 9 incompatible with Windows 7 64 bit home premium?

My PSE 9 just stopped working on WIndows 7. I have been using it without problem until I tried to run it tonight. It now simply does not run, no splash screen, nothing. I have tried an uninstall and reinstall without success. The last thing I remember installing was the October Microsoft patches was there sonething in that update that is incompatible with PSE9?

As you are facing issue with Bluescreen, kindly update the windows and also update the Bios of your Notebook from the below mentioned web link.
http://support.lenovo.com/en_US/downloads/default.page?
Now please check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HT1237 My Mac Mini will NOT complete Bootcamp with windows 7 64 bit Home Premium. The firm ware is not listed above mine was sent to me Jan 25th 2012. I have tried this with phone support 20 times + and I am losing my patience to say the least. I have a S

I am tired of getting the run around. I want to have Win 7 on this computer for gaming and a few other things that I can only do with a Win machine. Please help me if any one knows about this problem or has had the same issues. I cannot be the only one!
Carey Nuyen

Hi Carey, not much to go on, but so we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Windows 7 64 bit Home Premium DSCP value 0x00

I am trying to mark my traffic with DSCP values both with some built in options in the programs and with the Windows 7 Group Policy QOS options.
I have looked around and found the two regedit items that need to be changed and have changed them. Additionally rebooted the machine. I also verified that the interface had the QOS section marked.
Outside of that nothing is maintaining a tag when it leaves the interface. On the far side all traffic that arrives at my router is 0x00.

Hi,
Have you tried this step in the registry.
1. Go to HKLM\System\CurrentControlSet\Services\Tcpip\QoS. If "QoS" folder doesn't exist there - create it.
2. Add a DWORD parameter named "Do not use NLA" and assign "1" as its value.
3. Reboot.
Meanwhile, please refer to the similar thread.
Why is DSCP always 0 on Windows 7?
http://ask.wireshark.org/questions/1188/why-is-dscp-always-0-on-windows-7
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps,
Ada Liu
TechNet Community Support

HP Solutions Center for my Windows 7 64-bit Home Premium PC?

Similar Messages

Maybe you are looking for