Hp split x2 touchscreen not working while un-docking

hello hp support, i've recently bought a hp split x2 13-110dx. my touchscreen stops working whenever i detach the screen (tablet) from the keyboard (docking station). if i try to safely remove "Docking Station", first nothing happens and then after about 10 seconds all controls (touchscreen and touchpad) othen the keyboard itself stops responding. a reset allways solves this problem but that means that now i allways have to reset after every undocking. also, if the tablet is working fine, and i dock the tablet, again the touckscreen stops responding (again, reset required) i have done a hard (full) shutdown.i have installed all microsoft updates (i am running win8, not 8.1). what to do?sincerely,matan leilien

Hi  ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Split x2 Touchscreen and issues with the touchscreen not working while removed from the dock. Here is a document to troubleshoot the TouchScreen. The section you need is the TouchScreen responds inaccurately.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Hope this helps. Thanks.

Similar Messages

  • Iphone 6 plus fingerprint is not working while charging

    My iphone 6 plus fingerprint scan is not working while charging. Is this normal?
    I tried my iphone 5s and it works just fine even while charging.

    I think I got an answer to my own question
    If you're using generic lightning cable (non-original lighting cable), the fingerprint scan doesn't work while charging.
    I just find it weird as my iphone 5s works even if i'm not using the original lightning cable though.

  • HT1665 i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings if gets any cal

    Hi folks,
    i have an apple IPhone4. I am experiencing certain problem with my iphone4. The problems are as follows a. my ear piece and proximity sensor is not working while making a call. 2. It cannot reproduce sound without earphone but rings normally if gets any call.
    Can any one help me in this regard??

    Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose data by resetting, but it can cure some glitches after installing new software or apps.

  • Cracked screen, touchscreen not working, need to backup. Help?

    Hola,
    I dropped my iPhone 3G and broke the screen ... AGAIN ... in a comical addition to what has been a bad week of epic proportions.
    Anyways, I have a passcode on the phone, but with the touchscreen not working, I can't enter it. Therefore I can't get iTunes to back up the phone. The screen is cracked but displays fine, but touch input is broken.
    Is there any way to enter the passcode to iTunes and have it unlock the phone? Anything I can do at all? No MobileMe, not jailbroken, etc.
    Thanks.

    Unless you can enter the passcode directly on the phone, I'm afraid you're out of luck.

  • I am having trouble with my speakers not working while online in particular on windows.My audio works when playing audio files

    I am having trouble with my speakers not working while online particular on facebook. My audio works when playing audio files.

    Hi,
    Did it happen all the time or sometime?
    Please check online browser status:
    Click Volume icon in the taskbar, click Mixer link button as below:
    If it's fine, follow this guide to run troubleshooter to detect and fix the issue:
    Tips for fixing common sound problems
    http://windows.microsoft.com/en-in/windows/tips-fixing-common-sound-problems#tips-fixing-common-sound-problems=windows-7
    Meanwhile, this similar thread also could be referred:
    https://social.technet.microsoft.com/forums/ie/en-US/a4a1cfe5-93a5-4c0b-9bf6-f7db0304f2ba/no-sound-on-youtube-or-any-other-webpage
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • HP Pavilion 14z-n200 Touchsmart CTO Notebook touchscreen not working after update

    More than a month ago I updated my HP Pavilion 14z-n200 Touchsmart CTO Notebook and after the required restart I noticed that the touchscreen had stopped responding. I have searched the forums and found that other members of the HP Pavilion Touchsmart family had the same issues, but their solutions have not solved the problem with my specific PC. Any help would be great! Thanks

    Hi @Cbird22 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 14z-n200 TouchSmart CTO Notebook  and the Touchscreen not working correctly. If you follow this document it will show you how to correct this issue.
    You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
    When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
    Hope this helps.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Hello I am using Ipad 4 and its charger is not working while I was using it few days before and it was working properly now it says that the cable does not support this Ipad Please Help me out.

    Try a reset:
    - Hold the home button and sleep/wake button down at the same time. When the Apple logo appears release both buttons then try and charge again.
    If issue persists try:
    - Another known working cable
    - Check the charging port for any damage or debris
    - You could also use a dry soft bristle toothbrush and gently brush it on the port to clean it of any debris that could be in there

  • B14-178sa touchscreen not working

    Hi there, I have been tearing my hair out these last few days trying to get the touch screen working on a TouchSmart b14-178sa.
    The old screen was burnt out (you could see the damage to the touch sensors), so I replaced the screen with an identical model.
    The old screen wasn't even showing in the device manager, the new one is showing, indicated by the red arrows in the following screenshot.
    I thought Windows 8.1 might be the issue so I downgraded back to Windows 8 and installed all the software/drivers from the product support page.
    I also installed all Windows updates, the touch did not work from start to finish.
    I have tried the steps outlined on a support page here.
    Pen and touch is not available in control panel.
    Despite the touchscreen showing in device manager, system properties says no touch available.
    I have tried the AUO firmware update, which tries for a few minutes then just exits and fails.
    Here is a screenshot from the update:
    Any suggestions you may have which might help would be greatly appreciated.

    Hi @Woogle ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion TouchSmart 14-b109wm Sleekbook and the Touchscreen not working correctly. Here is a link to resolve Touchscreen issues.
    You could reset the BIOS with this document selecting the reloading the BIOS default settings.This will let the Notebook look at the new Screen, which has helped others.
    Please note remove any and all USB devices. Disconnect all non-essential devices, as these could cause some issues.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase.
    What is the part number of the new screen?
    Hope this helps resolve the Touchscreen.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Microphone not working while using handset

    microphone not working while using handset
    But it is working when loud speaker is On
    Y
    Wat to do??
    Kindly revert with your comments

     Repair the phone with PCC and report back  PC Companion (PCC)  Bridge (for Mac)   Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355  

  • Iphone4 speakers not working while calling!!

    Hi
    Can somebody help me?
    My Iphone4 speakers not working while calling only and they work elswhere!!
    I tried to reset the devise with sleep and home buttens but nothing changed?!
    Thx

    Hi
    Can somebody help me?
    My Iphone4 speakers not working while calling only and they work elswhere!!
    I tried to reset the devise with sleep and home buttens but nothing changed?!
    Thx

  • Iphone 5c clock does not work while asleep

    done hard reset updated on and off set automatically time but it works while the device is in use

    iphone 5c clock does not work while asleep
    I have to ask how you know... does it show the right time before you go to sleep? When you wake up?

  • My autofill does not work while using Safari. Have checked both Safari and Apple settings.

    My Autofill does not work while using Safari. I have checked both my Safari settings and my Apple settings but don't know what else to do.

    Hi Eustace....yes, I did reset Safari but it didn't help. I'm running Mac OS X Lion 10.7.5...which might be the problem...my Safari is Version 6.1.1.

  • Soundtrack Pro, with Logic Studio. app will not work, while Garage Band is present on my iMac?

    Still new to Logic Pro. Got the Soundtrack Pro when i bought the Logic Studio. am i to understand that this app will not work, while Garage Band is present on my iMac?
    if this is true, i'd welcome any suggestions.  do i have to delete GarageBand on current machine which has Logic Pro?
    appreciate any help
    thanks,

    My MacPro w/ OSX 10.6.8 runs GarageBand, SoundtrackPro and Logic 9 (Express) without issues.
    Everything was installed fresh - ie no overwrite OS upgrades and no app version overwrite upgrades.
    Just so we are clear - an UPGRADE would be from OSX 5 to 6 or from Logic 8 to 9 and involves a purchase. UPDATES are those decimal increments - 10.6.7 to 10.6.8  or Logic 9.1.3 to 9.1.6 that are free.
    Sometimes the sequence of installs can make a difference.
    Good luck,
    x

  • Ideapad touchscreen not working on upgrade to Windows 10

    I  have an Ideapad Flex 15. Since I upgraded yesterday to Windows 10, I have lost the touchscreen ability I had up to that point on Windows 8.1. On search for pen and touch, I was given this message on a system information page: "No pen or touch input is available for this display." I have looked in device manager under Human Interface Devices. Expanding the view to show hidden devices, I see "HID compliant touch screen." When I click to get device status, this is the message: "Currently, this hardware device is not connected to the computer. (Code 45) To fix this problem, reconnect this hardware device to the computer." How do I do that? I note a similar problem in Windows 8.1 on this posting: http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/touchscreen-not-working/c48cda23-93f2-4a9a-b6da-f7f47e67de0a Does anyone have any idea how to reconnect the hardware device -- or at least to solve this problem? Thanks!

    I solved the problem here for my sister's Flex 14.
    Press Windows+X and open Device Manager, go to Mouse and uninstall USB touchscreen.
    Solved the problem here...

  • Ideapad (Flex 15) touchscreen not working on upgrade to Windows 10

    I  have an Ideapad Flex 15.
    Since I upgraded yesterday to Windows 10, I have lost the touchscreen ability I had up to that point on Windows 8.1. On search for pen and touch, I was given this message on a system information page: "No pen or touch input is available for this display." I have looked in device manager under Human Interface Devices. Expanding the view to show hidden devices, I see "HID compliant touch screen." When I click to get device status, this is the message:
    "Currently, this hardware device is not connected to the computer. (Code 45) To fix this problem, reconnect this hardware device to the computer."
    How do I do that? I note a similar problem in Windows 8.1 on this posting:
    http://answers.microsoft.com/en-us/windows/forum/windows8_1-hardware/touchscreen-not-working/c48cda23-93f2-4a9a-b6da-f7f47e67de0a
    Does anyone have any idea how to reconnect the hardware device -- or at least to solve this problem? Thanks!
    Mod's Edit: Added model to Subject line for clarity

    I took this in to a shop, and two technicians tried to solve the problem to no avail. One of them did as suggested, and uninstalled the touchscreen driver under Mice and other devices, but that only disabled the mouse touchpad.  So it was reinstalled, and the driver for the touchscreen under Human Interface devices was reinstalled, but none of it helped, and I still lack the touchscreen capacity I had before.  I cannot scroll except on the side ribbon, and I cannot use the touchscreen to zoom in and out, which I could do on Windows 8 and 8.1.  So it seems there is no new Lenovo driver for the  IdeapadFlex 15 that is compatible with Windows 10.  I am told to wait and see, and to hope that Lenovo addresses this problem.  BTW, I previously had two Microsoft tech people remote control my computer to fix this, and they both failed.   I am disappointed with Microsoft and Lenovo.  Any computer that was bought within the last couple of years fitted with Windows 8 should upgrade no problem to Win 10. 

Maybe you are looking for