HP Start up Screen freezes

I am using an HP desktop, not sure which model exactly, running Windows Vista. When i turn it on I can't get past the start up screen, I am unable to get to the BIOS and am unable to boot from cd.

Hello bingoguy,
You are unable to fully load your desktop to the main screen, is that correct? I will be happy to help you.
Can you please provide the full make and model of the computer you have, If you are unsure where to locate that information have a look at this link for help if needed.
Please respond back at your earliest convenience.
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Similar Messages

Start up screen freeze. keep buffering how i can get rid off . I have iMac desk top OS X

I have iMac desk top OS X. tried to install mountain lion. after download the screen freeze on me, keep buffering and doing nothing. I turned it off on couple of times
it goes straight back to buffering

Where exactly did you download Mountain Lion from? To the best of my knowledge since Mavericks was released, Apple only make ML available on DVD at:
http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

Start Up Screen Freeze With Lines Across Screen

The computer is the iSight version. In moving it from one room to another I shut it down properly. I had a back-up HD with Time Machine which I shut down properly. When I tried to restart it shortly after at the new location, the start up chime sounded and the Apple logo came on with the spinning wheel but the screen had light blue horizontal lines across it. The lines at first seemed squiggly but after restarting a few times, the screen seemed to be divided into vertical columns about 3/4" wide with one column having pixels colored light blue and the next column having the same coloration but the row of colored pixels was above the previous one. This arrangement alternated across the screen. I hope this is clear. After a while the spinning wheel and the screen froze and the computer would not continue with the start up.
I reset the SMU by unplugging the power cord, etc. but this did not work. I tried restarting in safe mode-negative. I tried restarting from the original disc-negative. Initially, it sounded like the disc was working because it makes a distinctive noise when a disc is working in the drive but eventually the same initial screen came on with the wheel spinning and then freezing. I tried the current versions of Techtool Pro and Disc Warrior and neither worked. The same thing happened. The noise from the disc drive but the same screen would come on and then the spinning wheel would freeze. Initially the screen with the Apple and the spinning wheel and the lines came on quickly but after a number of times turning the computer on and off, the screen remained dark with a faint light and when the screen came up, the spinning wheel was already frozen.
I use a flight simulator-X-Plane- a lot and some times when I leave it on, screen saver comes on and when I bring the screen back up, the first screen that came up and quickly changed had to do with X-Plane but not with what I was doing. Also, sometimes when I left it and came back there was a different screen but still part of X-Plane but not the screen I left before. I don't know if this is related to my problem or specific with X-Plane. I brought it up because this is the only thing that was different prior to this problem but may not be related. Right now, I've turned it off(obviously) and disconnected the power cord and the keyboard.
Any help would be appreciated.

I've started taking the iSight apart. Detaching the plastic took some time and care but with only a few tears. Separated the screen. The main board is positioned such that the capacitors are on the bottom. So many connections and most of them small. Have to be careful. So many small screws. I hope I can remember where they all go when I put everything together-I hope. I'm at the point where I've turned the main board over so that the capacitors are showing. I hope I can reconnect correctly. Two capacitors have a slight bulge at the top compared to the others. Although I am not sure whether these two are part of the problem. There is another one that has no bulge but there seems to be some stuff on the top. It is not corrosion so I'm not sure whether it was manufactured that way or something is wrong with it. I finally found the battery. Just to change it is such a job. You have to disconnect a lot of stuff and turn the board over to get at it unless Apple technicians have a shortcut. Do you think the battery could cause the problems I have? Anyway, if I have the board exposed already might as well try and change the capacitors. I have not come across any video that shows how to expose the underbelly of the main board. Nor have I seen any video that shows what each part is. On the left side of the layout is an long rectangular shape covered over with black plastic. I haven't checked it out but I assume it is the power source. At the upper left there is a rectangular board with capacitors underneath but there are connections underneath that are so tightly stuffed that I couldn't turn it over but I could lift it up a little and see the heads of some capacitors and there wasn't any bulging capacitors or corrosion. There's one big capacitors under there. Much bigger then those on the mother board. Interesting observation. When I turned the screen over to expose its back most of it was frosted except for a small rectangular piece that was dark but glassy like and the glass like part lies exactly on the small rectangular board about 4X5 or 4X6. Interesting why this small section of the back of the screen should be different from the rest of the back and why it should be exactly above the smaller board. Like the previous versions of iMac, it would be so easy to be able to open the back and have all of the capacitors exposed. My next action is to contact one of the references you posted and see if I can get these three capacitors and the battery from Radio Shack or somewhere and solder the capacitors to the mother board. After all of this putting the whole thing together correctly without ending up with extra parts. One thing did break. Next to the fan in the middle there is a piece of metal attached to the back. There is a small narrow slot in this metal that another piece of bent metal seems to go into and was soldered to it and when everything is put together it seems, although I'm not sure, that this metal touches the back of the screen. It looks like I have to solder it back. I don't know what its purpose is, maybe it grounds the screen? I thought the piece of metal was something to pull in order to liftup something else. So far that is the only thing that has broken and hopefully can be easily fixed. But nothing that seems easy is easy.

Power Mac G5 PPC Screen Freeze Turbo Fan Issue

Hello...
I've read most, if not all of the related posts; however, I have not seen any definitive answer to this issue.
My, almost mint condition, Power Mac G5 PPC has recently started the screen freeze, turbo fan, won't boot issue that seems to be prevalent with these models. I've tried almost all of the suggested troubleshooting fixes and have had no luck. My most recent attempt was to try and start in single-user mode (holding SHIFT + S at startup) and I received the following error screen then turbo fans: http://www.thishateofmine.com/Assets/photos/appleCPUpower.jpg
Remember...this is a PPC, so why am I getting an error referencing Intel CPU Power Management? This leads me to believe the OSX 10.5.8 I've been running has installed system resources for non-existent CPU's and is causing a conflict. This would be a major coding error on Apple's behalf, would it not?
I never had this issue when running any previous OS version and this computer had been running spectacularly.
It has only been used in my clean, smoke-free, home recording studio and if it werent' for a few blemishes left by external HDD's, this computer could pass as brand new. There is very little internal dust and I have kept it clean with electronics approved compressed air. I have not removed anything to get at the PSU area for cleaning, though.
If I could get it to boot from the original DVD's and install up from Panther, I would. Based on the error message I'm receiving, I do not believe this is a logic board, RAM, CPU, etc... issue. The computer will boot into open firmware and function fine, but not the OS; therefore, this would be an OS problem, right? Is that not a logical mental path?
This HAS to be a known issue and have a resolve that is NOT logic board and/or CPU replacement related.
Any help would be greatly appreciated.
BTW...please read this as a positive communication from a frustrated (knowledgeable enough to be dangerous) user. I just want my G5 back.

After plugging in the G5 PPC, as it had been unplugged for several days, here are last night’s efforts:
With only the original, main Hitachi Deckstar 400GB HDD in slot 1, I attempted to boot normal, boot holding SHIFT + COMMAND + V, boot holding COMMAND + S and boot to the original install DVD, all with no joy. In my original post I incorrectly stated I was attempting to boot into single-user mode by holding SHIFT + S, which resulted in the screen displaying the OP’s linked image. In attempting to boot into (actual) single-user mode and verbose mode, I get two different text messages – and have taken screen photos, but have not been able to upload yet – both of which stop with “DART enabled” and then do nothing else with no cursor capability, only to result in turbo fans and having to hold the power button down to shut down.
Next I ran (again) the Apple Hardware Test from the original install DVD and everything passed.
Feeling confident the hardware is all in working order, I used my brother’s Macbook Pro 3.1 (OS v10.6.8) as the host to mount the G5 PPC in target disk mode. The PPC’s HDD mounts up with no issues and everything is accessible, so I shut down and swapped the original HDD with a 500GB Western Digital Caviar SE16 that did not have an OS on it, restarted to AHT DVD and ran test again with everything passing.
Now I reconnected the target disk mode setup, formatted the PPC’s WD HDD and installed Leopard on it while in TDM from the MBP3.1. Everything installed, restarted will still TDM connected, MBP3.1 started up with the PPC’s HDD as the startup disk, went through all the typical initial install information and registration and voila I’m back in target disk mode with the PPC’s HDD as my boot disk and MBP3.1’s HDD on the desktop. Everything’s accessible, functions and looks good.
Keeping in mind I’m only dangerously knowledgeable regarding computers, I’m thinking I should be able to shut everything down and now boot the G5 PPC from the internal WD HDD I just installed the OS on, right? Wrong. All I get is the infamous folder with a flashing question mark.
Help!!! (…please???)
BTW…as it has been mentioned in a few posts, but is one thing I have not done yet, I thought it worth mentioning. I have not replaced the internal battery, but the last time I was able to get the computer to boot to the internal HDD and run for a short period of time, after being unplugged for several days, I did have to re-enter time, date, location, etc… info. The actual last time I got it to boot, I did not do this, as it only got as far as loading the desktop before freezing, but the time was correct. Didn’t get a chance to check date and location, as it froze almost instantaneously.

BLACK SCREEN on start up with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-power

Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any
cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears,
and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After
about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling,
so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the
driver wasnt for the system, which was wrong. I made it work somehow, but it was still sluggish. I rolled it back to an earlier driver, and now it works fine. No sluggish performance / slight freeze window thing going on.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change
this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1
Please excuse the small text at the beginning, there isn't an option to un-do that error.

You are very wrong about that mystified. What do YOU think made my computer work without beeping at all hu? (I bet you're gonna tell me). I figured it out.
RE-INSTALL WINDOWS 7 OS.
SOLVED.
DOESN'T BEEP ANY MORE.
THAT IS A PART OF microsoft ISN'T IT.
::: EGO KILLER 9000 :::

When I try to start Lightroom CC i get the following error and the splash screen freezes An error occurred when attempting to change modules.

When I try to start Lightroom CC i get the following error and the splash screen freezes An error occurred when attempting to change modules.

Just had the same issue... went through the steps here: https://helpx.adobe.com/lightroom/kb/error-changing-modules-lightroom.html
For me it was Solution 5. I had to change permissions and add me as a user (only had system access to the folders).

I just dowload the AE trial version on a mac with maverick and The start up screen is freezing on "Initializing MediaCore".

The start up screen is freezing on "Initializing MediaCore" and after 10 minutes it is open saying i have no quicktime that is no true ???
i am working with maverick on a mac book pro ?

This is not a chat room, sometimes it takes time for someone to post a reply. What have you tried? We don't know any specifics about your system.

10.3 to 10.4 upgrade freezed on apple start up screen.

I just upgraded my os 10.3 to 10.4 via an independent copy (not bundled with any computer)...every thing seemed to go well, except that when it restarts it freezes on the gray apple start up screen. I've both verified permissions and repaired the harddrive with the installation disk and even tried reinstalling os 10.4 again,...with the same result.
Any thoughts?
Thanks

You're Welcome Phat Slyce!
Yes, I would recommend an Erase & Install, at this point.
Gulliver's article 10.4 Tiger Upgrade: Decision tree+Checklist, will be very helpful to you.
Be sure to ask any more questions you may have.
And perhaps, at some time, you would care to mark this topic accordingly. Info here What are question answers?.
Thank You For Extending That Courtesy, And Good Luck!
ali b

Screen freeze after OS start

Hello,
I have a Mac Book Pro. The screen freeze right after starting the OS.
I can not move my mouse (usb or pad), Typing has no effect.
-> I switch OFF/ON many times: do not work
->I tried safe mode, but nothing work
->I tried Reboot/Startup holding your Command-S key down. But I can not type anything.
The clock is still working, and the airport still find if internet is ON.
It seems that everything work except the mouse and keyboard....
BUT during the re--boot, if I press Shift and power -on. the computer start in Safe mode....but then nothing....
Only the POWER button is working.
Please help.....

I still need help.
I went to the apple store, plugged my computer into their monitor, keyboard and mouse. It worked fine. For over an hour I clicked on everything and did just about everything I can think of that I usually do. I changed settings in preferences, turned off the screen saver and turned it back on, turned off putting the computer to sleep and back on, restarted multiple times and the keyboard and mouse worked fine. So, we determined that I must need a new keyboard and mouse.
I set up my computer this morning and it worked fine. But when I came back and tried to wake it up from the screensaver I got no reaction. pushed the power button lightly a couple of times to force the ask for password screen to come up, when I tried to type my password in nothing happened. So then I forced the computer to shut down by holding the power button down for three seconds (the one on the monitor). Then started up, mouse wouldn't work. So, I thought it must be the usb port on the monitor that is bad. I shut down. plugged the keyboard into the back of my mac instead of the monitor.
All seemed great. Computer response even seemed faster. I thought I had solved my problem. I was using the computer for probably less than 30 minutes and then while I was using it the mouse froze. Computer would accept no input from the keyboard either, like clicking F11 for expose reaction.
I'm back to square one. What else should I try?????
Any ideas out there???
Thanks in advance.
-charlene

Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

Lots of Frustration. In some cases the LGG2 is rendered useless even as a phone.
Here is what I did.
Got replacement Phone.
Same problems but I shut down all apps that I purchased even though they worked before KitKat.
Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
Then I got 2 CM free utilities. The Clean and Wash utilities. Run them and find the culprits grinding CPU
cycles and running down the battery. Number One is the Verizon Voice Mail service constantly turning on and off
and retrieving data not there. Turn of the extra Voice mail and use the old access with the *6. Unless you have
100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
YOU can see the battery suckers and shut them down when not using automatically.
Start putting back one application at a time you used often and see it they work and if the utilities will tune them
down if they cause problems. The LG will get better but with some limitations.
LG and Verizon have a problem with what was a great phone.turned bad overnight.
whatmorecanyousay

TS3423 My MacBook Pro freezes on the blue start up screen. What can I do?

My MacBook Pro freezes on the blue start up screen. What can I do?

See if this will help:
http://support.apple.com/kb/PH7212
Ciao.

MSI Z68A-GD80 Freezes up @ 'Starting Windows' screen.

MSI Z68A-GD80 (oc genie off, with corsair h60 cpu cooler, around 46 degrees celcius, as it reads in the bios. reset the cmos many times, tried a different cmos battery, also flashed to the newest BIOS version. )
8GB DDR3 g.Skill turbulence 2200mhz RAM (tried with 1 stick in DIMM 1 slot @1333 @1.6v, ect)
GTX480 x 2 (tried with and without a video card, tried on board via dvi, same result)
i7 2600k default values across the board
OCZ MX 1250W PSU
Tried with no HDD even, when installing windows, would get to the Starting Windows screen and freeze, or give me a BSOD: IRQL IS NOT LESS OR EQUAL TO
But I have also tried with hard drives, 120gb revodrive, 64gb ssd from corsair, and 640gb 6gb/s from western digital.
Everything I have tested on a different system working, including the processor. Am I missing something? The RAM might not be compatible? I unfortulately do not have another stick to test on the mobo.
Edit: Also, tried with both 32 bit and 64 bit w7 disks.

Quote from: aqualab on 08-June-11, 23:50:31
Have you try with a fresh formatted drive ?
If I was you I will take the WD 640 put it on another build and delete the partions and reformat ntfs
When you install Windows on an old drive , it will look at the existing OS on it ,to know if you can upgrade, if the install detect an install who was made on ACHI ( a ssd as example) and your BIOS is set to IDE, I wonder if it will not create the problem you have as the install thing you are on ACHI when you are not.
I tried it with no hard drive at all. Booted from disk, and before the installation got to the point where it needed a hard drive, it froze up on the 'Starting Windows' screen after loading windows setup files.

Windows 7 freezing at 'Starting Windows' screen. (GX620)

I had been running Windows 7 since June '09 with no problems. Recently, every time I start windows it gets stuck on the 'starting windows' screen. I've tried reformatting, reinstalling with different versions of Windows 7 and different discs. I've tried swapping the memory and the hard-drive. I've updated the bios.
What is going on? Please help.

I am having this same issue and was wondering if you came up with a solution.
Even when I try to reinstall a fresh copy of Windows 7 the computer locks up after the installation of the initial files. Then I'm left with a useless barely-installed new system so I am forced to go back to the original one that doesn't work anyway. Safe mode works just fine, but I can't work in Safe Mode all the time.

Macbook freezes at Start Up screen/Will not boot

I have a 13" MacBook purchased almost two years ago. The computer recently froze completely. I tried to restarted the computer but it would just go to the white start up screen (w/ Apple logo) over and over again. I turned it off completely and let it sit for a hour or so while it was plugged in. Now when I turn on the computer it will not turn on - it makes the Apple chime and goes to the white start up screen with grey logo.
Is there anything trouble shooting I can do to try and resolve this problem?

What operating system are you running please?

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.

Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

HP Start up Screen freezes

Similar Messages

Maybe you are looking for