HP Storage Management Pack v4.0 for Operations Manager
Hi everyone,
I've installed HP StoreFront Manager MP for Microsoft 4.0 (HP Storage Management integration with MS System Center) on a Ops Mgr 2012 R2 Server
The diagram view of the two P4500 G2 StoreVirtual Appliances are shown without issue.
However I cannot get any alerts, error alerts, events, warning events showing in the HP Storage or HP StoreVirtual Storage MP folders
I've created new alert/event view/criteria "show data related to: HP Storevirtual SNMP trape catcher rule ALL
But this also shows nothing.
I've followed the HPStorageManagementPackforSystemCenterUserGuide-4.0.pdf to no avail.
Any ideas most appreciated.
Configuration as follows:
Installed HPStorageManagementPackforSystemCenter.exe on the Ops Mgr 2012 R2 Server:
SCOM_MP_V4.0_Microsoft_Windows_Server_2003_2008_W32_2008x64_2008_R2_Win_Server_2012_R2_T4282-10516
https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=System_Center
Chose the HP Storage MP install option: OpsMgr Server: requires Management Server deployed on this server
Ticked the "HP StoreVirtual Storage" component
Executed HP Storage Management Pack User Configuration Tool.exe
Added the IP of Ops Mgr 2012 R2 management Server
Added the 2 IPs of the HP StoreVirtual Storage appliances
Configured SNMP community string as 'public' for each appliance
It shows two the discovered 2 storage systems
In Ops Manager 2012 R2
Authoring / object discoveries, enabled the following rules, saved to a new MP:
HP StoreVirtual Cache Discovery Rule
HP StoreVirtual Drive Discovery Rule
HP StoreVirtual Network Device Discovery Rule
HP StoreVirtual Power Supply Discovery Rule
HP StoreVirtual Discovery Rule
HP StoreVirtual System FAN Discovery Rule
HP StoreVirtual SNMP Trap Capture Rule
In the Ops Mgr 2012 R2 Console, the HP StoreVirtual Storage MP Digram View shows the cluster, two p4500 appliances with cache, drives, fans, network devices and power supplies all green
SNMP on Ops Mgr 2012 R2 Server
Trap community name public
Trap destinations
localhost
IP of Ops Mgr 2012 R2 server
Security, send auth trap public community
Accept SNMP packets from IP hosting the Hp Storevirtual Centralized Management Console
SNMP and SNMP trap services started
HP Storage MP server service started
On the CMC Server SNMP windows service config is:
Community name public
Trap destination IP of Ops Mgr 2012 R2 Server
Security, send auth trap public community
Accept SNMP packets from any host
SNMP CMC settings for SAN Management Group
SNMP general settings, Access control (IPs of Ops Mgr 2012 Server and CMC server)
Trap recipient (IP of Ops Mgr 2012 R2 Server, SNMP v1)
Hi,
Can you check windows event and see what error message appears?
I highly recommend you follow the HP Storage Management Pack for System Center User Guide.
<cite>http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c03112503-1.pdf</cite>
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party
contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Similar Messages
-
HP Operations Manager integration pack 7.1 for SCORCH Error
Hi
I am using the HP Operations Manager integration pack 7.1 for SCORCH this is working well sending messages in both directions from SCOM2012 to HP OM and from HP OM to SCOM with the get message/acknowledge message objects but the monitor message object does
not work at all. No errors are logged and we can see the traffic in a network trace. The monitor message object just never triggers.
has anyone else seen this issue ?
ThanksThe problem that I had was with the HP OM función "Monitor Message". Web service didn´t response Orchestrator.
After all I fond the solution, If you Want the Orchestrator to monitor Messages from HPOM you should
define a filter by message group on the activity "monitor Message";
In this case that's because HPOM has the visibility of the user, configured through the atribute "Message Group".
I hope will be useful.
Regards -
HP Storage Management Pack 3.0
Hello,
Is any one successful in getting diagram view of HP storage devices using HP Storage Management Pack 3.0 for SCOM 2012. I could successfully send SNMP test traps from storage nodes to SCOM server. My configuration is Gateway server in an untrusted
domain and have trouble connecting HP Storage Management Pack User Configuration Tool.exe
application to SCOM server from GW server domain. It is not clear which port is used by this tool/application to communicate with SCOM server. Any pointer in this regard is highly appreciated.
ThanksHi Rajemma,
we have installed MP Version 3.0.1 on SCOM 2102 SP1 UR3.
Unfortunately I donot receive the SNMP Traps, getting following error instead:
Log Name: Operations Manager
Source: Health Service Modules
Date: 23.08.2013 12:04:49
Event ID: 10357
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: shilmon10.de.sms-demag.com
Description:
Module was unable to execute the notification query.
Error: 0x80041004
Details: Provider failure
One or more workflows were affected by this.
Workflow name: HPEnterpriseStorageP2000MSAMP.WarningAlertNotify.Catcher.Rule
Instance name: HP P2000 MSA SNMP Trap Catcher Discovery
Instance ID: {7FF6B2C9-77E1-61AD-5312-21FCF1B1E40B}
Management group: SMS-SIEMAG
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Health Service Modules" />
<EventID Qualifiers="49152">10357</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-08-23T10:04:49.000000000Z" />
<EventRecordID>7651514</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>shilmon10.de.sms-demag.com</Computer>
<Security />
</System>
<EventData>
<Data>SMS-SIEMAG</Data>
<Data>HPEnterpriseStorageP2000MSAMP.WarningAlertNotify.Catcher.Rule</Data>
<Data>HP P2000 MSA SNMP Trap Catcher Discovery</Data>
<Data>{7FF6B2C9-77E1-61AD-5312-21FCF1B1E40B}</Data>
<Data>0x80041004</Data>
<Data>Provider failure
</Data>
</EventData>
</Event>
Would be great to receive some help.
regards sebastien -
HP Storage Management Pack Conflicts with Network Monitoring SNMP
The HP Storage management pack that I installed requires starting the Windows SNMP services, which creates a conflict with SNMP used for SCOM network monitoring. I am spinning up a second SCOM mangement server so I can split these functions. What would
you recommend to split these functions across the two management servers? Uninstall the HP Storage Management Pack, and install on the new server? Or move the network monitoring to the second server?
Thank you for your help!Does the HP Storage pack support resource pools? What I've found with these 3rd party packs that implement connector services is they do not provide true HA via SCOM resource pools - they are standalone systems with a connector service. This is true for
the NetApp (DataONTAP) pack, and it's a huge disappointment.
Vendors do this because they have an API, and they think the only way to implement discovery and monitoring in SCOM is to create a service that accesses the API - and then the service is basically a collector in this case, and typically has a handful of
rules (sometimes just one rule) that scrape events on the management server and they are misinterpreted to be alerts coming from some instance.
I turn green when I run into this type of problem, because all this can be accomplished with native modules or managed code that are designed to work very well with SCOM.
I know this doesn't answer your question - it's more a way for me to express my distain for these type of packs.
Jonathan Almquist | SCOMskills, LLC (http://scomskills.com) -
Hi,
I am trying to use HP storage monitoring pack v 3.0.1 to monitor HP 3PAR storages with System Center Operations manager (SCOM).
I am having trouble getting Events/Alerts from the management pack. I have done the addsnmpmgr <mgmt server ip> to enable SNMP traps. I can get the diagram view / state view but not the alerts. The overrides told in the doc are in place. Can you pls tell me as to what I am doing wrong? Any help is greatly appreciated.
Thanks
H VYes,
I have enabled HP StoreVirtual SNMP Trap Catcher Rule
and HP StoreVirtual Storage Discovery Rule
SNMP WMI Provider is installed and the SNMP Trap Service is disabled
Is all this event something we have to live with as Jugganutz1871 says? This will
fill up the event log... -
HP Storage Management Pack woes
I seem to be having an issue since I imported this management pack into my test environment. I'm running SCOM 2012 R2 with v3 of the Storage pack and installed the SNMP Collector on an agent managed server. However when I installed the management
pack (3PAR) and enabled the 3PAR SNMP Trap Catcher discovery I did it against the Windows Computer Class instead of the specific server I wanted to target. Now all computers running the service SNMP TRAP are showing as discovered inventory generating alerts
of OpsMgr failed to run a WMI Query for WMI events.
I tried to stop this by creating a new override for disabling the discovery and setting it to enforce. Then using the Remove-SCOMDisabledClassInstances cmdlet but it's made no difference.
I've also tried clearing the cache on individual agents.
Any ideas?
ThanksI had exactly the same issue this week. My DB filled up with event logs. Once I realised I had targeted the whole Windows Computer Class, I removed the enable override for the SNMP Trap Catcher object discovery, but the events continued to pile in.
In the end I had to remove all of the HP Storage v3.1 MPs and start again.
Currently having new issues now with a P2000 that is reporting in via SCOM's Native Discovery, but won't appear under the HP Storage MP. Now looking to use a collection point for the traps that ISN'T one of the SCOM Management servers, as it appears there
is a known issue with this......
On page 123 of the HP Storage MP user guide:
Known Behavior
Unable to collect SNMP traps from HP Storage Management Pack for System Center. Microsoft has implemented a workaround from OpsMgr to move the SNMP trap collection server to a separate Management server which is not a part of Network Resource Pool/Discovery
Server. This will allow the SNMP Trap service to listen on port 162 and collect traps.
Sheeeesh..
And just realised that ther is now a new MP called HP StoreFront Manager 4.0 which seems to effectively be the latest version of HP Storage MP:
http://www.systemcentercentral.com/hp-storefront-manager-for-microsoft-4-0-hp-storage-management-integration-with-ms-system-center/ -
It is not possible to install LenovoEMC Storage Manager for Linux on Ubuntu 14.10
hi,
I have big problem installing LenovoEMC Storage Manager for Linux on Ubuntu 14.10 64bit.
I downloaded it from https://lenovo-na-en.custhelp.com/app/answers/detail/a_id/26108
Installed JRE (both 64 and 32 bit)
Selection Path Priority Status
0 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 auto mode
* 1 /usr/lib/jvm/java-8-oracle/jre/bin/java 1 manual mode
2 /usr/local/java/jre1.8.0_25/bin/java 1 manual mode
java -version
java version "1.8.0_25"
Java(TM) SE Runtime Environment (build 1.8.0_25-b17)
Java HotSpot(TM) 64-Bit Server VM (build 25.25-b02, mixed mode)
tryed with both. but without success.
I am still getting error:
./setup-1.4.4.14439.bin
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Any help?
Thanks!
Solved!
Go to Solution.Ok , i got this baby working.. sudo is not a problem here.. you need to specify additional java parameter for installer!
./setup-1.4.4.14439.bin LAX_VM /usr/bin/java -
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
An Small step by step how to install this app. I this first example it was installed on Red Hat 6 Linux
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439.
1 - Download it from https://lenovo-na-en.custhelp.com/app/cust_alp/p/1031,1150
2 - Change File permissions ( chmod +x setup-1.4.4.14439.bin)
3 - Now you can install so execute this sintaxis : ./setup-1.4.4.14439.bin
4 - When app installation finishes, you must do it with this file into folder installation (chmod +x LenovoEMCStorageManager)
5 - Then to open the app execute it: ./LenovoEMCStorageManager
Video Tutorial
How to install LenovoEMC Storage Manager for Linux: Version 1.4.4.14439
In This second example I installed same version on Ubuntu 13.10. Look at the end of messages of thread and you will see this steps
Install Storage Manager setup-1.4.4.14439.bin in ubuntu.
Attachments:
lenovoemcstoragemanager.jpg 27 KBHello everyone ,
I have a lenovo px4-300d, I'm on Ubuntu 13.10 64bits with Gnome 3 as GUI and I'm trying to install the LenovoEMC storage Manager but it failed :
Preparing to install...
Extracting the JRE from the installer archive...
Unpacking the JRE...
Extracting the installation resources from the installer archive...
Configuring the installer for this system's environment...
Launching installer...
Graphical installers are not supported by the VM. The console mode will be used instead...
Preparing CONSOLE Mode Installation...
===============================================================================
Choose Locale...
1- Deutsch
->2- English
3- Español
4- Français
5- Italiano
6- Nederlands
7- Português (Brasil)
8- Svenska
CHOOSE LOCALE BY NUMBER: 2
=======================================================
Installer User Interface Mode Not Supported
The installer cannot run in this UI mode. To specify the interface mode, use the -i command-line option, followed by the UI mode identifier. The valid UI modes identifiers are GUI, Console, and Silent.
=======================================================
Is it still aproblem with the 64 bits architecture ?
Have you find any solutions ? Thank you very much -
Cookie manager for opera mac?
Hello: is there a cookie manager for Opera 9.1 mac? The built-in one does not measure up to mozilla's cookie managers. Thanks.
Hey look at this:
http://supportforums.blackberry.com/rim/board/message?board.id=blackberryformac&thread.id=2499&jump=...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Satellite L555-S7008 - cant install Intel Storage Manager for Win XP
I have installed XP on my laptop.
Everything works fine except that I cant put it into Ahci mode.
I Installed xp under compatability mode because I am supposed to be able to install the sata drivers by running Intel Storage Manager.
I have tried the version on this website as well as one from Intel, and they both stop with the error
"Your computer is not does not meet the minimum requirements for this software".
I have also gathered that I can extract the drivers from this package, and install them manually,
however when i try, it say drivers extracted successfully, yet nothing is extracted.
Can someone please help me get the Storage manager to install so I can run Ahci mode.Hi
Satellite L555-S7008 belongs to the Toshiba US series.
You have to download the drivers from the Toshiba US driver page:
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
There is a Intel Storage Manger:
Intel Matrix Storage Manager for Windows XP/Vista/7 (32/64)(v8.9.0.1023; 10-23-2009; 4.25M)
You will need to set SATA to AHCI before including this to the Win XP setup. -
Hello Team,
We have DPM installed in our environment for backup.
We want to implement Central Console for centralized administration. I understood that to install central console we have to install operation manager first and then install central console.
I want to know if we need a license for operation manager to install and if yes then what could be the cost of the license?
Regards,
Suman RoutHi,
We have System Center 2012 DPM installed in our environment.
If any license is not required then how do I install Central Console for centralised DPM Administration. I tried installing Central Consol but I got an error as Need to install Operation Manager first. As Central Console can only be installed on Operation
Manager Server.
NOTE: We do not have Operation Manager or SCOM installed in our environment.
Could you please also let me know the steps to install.
Regards,
Suman Rout -
Intel Matrix Storage Manager disables Windows Update and Windows Validation on Windows 7 64-bit
I have a Lenovo ThinkPad R61 8918CTO on which I did a clean install of Windows 7 Ultimate SP1 (64-bit) on a new Seagate Momentus XT 750GB drive. The installation was trouble-free, as were all of the post-install Windows Updates.
Then I installed ThinkVantage System Update 4.03 and used it to install most of the available Lenovo updates. Big mistake. I'll spare you a detailed account of the hours I wasted troubleshooting, rolling back to previous restore points, and doing more troubleshooting, but it turns out that installing Intel Matrix Storage Manager driver v. 8.9.2.1002 caused Windows Update and Windows Validation to fail.
Symptoms: Windows Update control panel can't check for updates and reports that the Windows Update service isn't running when it actually is. Online Windows Validation fails and the standalone Windows Validation utility won't install. Microsoft programs that require a validated copy of Windows (e.g., Microsoft Security Essentials) won't install.
Solution: Roll back the driver for the relevant SATA controller to the previous driver.
I've reinstalled ThinkVantage System Update 4.03 and hidden the proposed Intel Matrix Storage Manager update; since then, I've used it to complete my Lenovo updates without issue.
I hope this post will help other people with this problem find the solution a lot faster than it took me!This happened after installing a new advanced format drive with 4k-byte sectors, I'd guess. If the storage driver doesn't report the physical sector size to Windows, update fails.
I just ran across this myself (again) putting Win 7 on a T400.
I don't know why this is still going on. It may be that the update lists for older machines still have pre-AF-drive drivers listed.
FYI, another fix is going to the Intel site and installing the latest Matrix Storage Manager AHCI driver. This may be more desirable than rolling back to an older driver in some cases.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Oracle's 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network
devoted to the same topic. Whats new may be said ?
The target of message is to highlight the optimal sequence of steps
required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.
Oracleasm library install is done immediately after creating "oracle"
linux account and "dba" group to be ready for ASM Instance creating during
the first Installer run supposed to build it. ASM instance for disks and disks
group management is created the first by Installer along with the disks group
for database supposed to be built during the second run of Installer and to be
placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors.ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.
With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM
using standard Linux I/O system calls.It requires to create RAW devices for all
disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml[oracle@casa database]$ df -k
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/hda2 70557084 8674712 58298272 13% /
none 387852 0 387852 0% /dev/shm
/dev/hdc 656964 656964 0 100% /media/cdrecorder1So, you have 58298272 bytes available, which is 55MB, and the installer asks for 60 ;) You should probably use df -h instead of df -k...
PS where are you planning to install to with only 55MB available anyway?
~Jer -
Oracle 10gR2 Automated Storage Management implementation on CentOS 4.1
Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected]Actually there are several nice articles on Oracle Technical Network devoted to the same topic. Whats new may be said ?
The target of this message is to highlight the optimal sequence of steps required to bring Oracle10g (10.2.0.1) ASM-database up on CentOS4.1 , placing ASM instance and serviced databases in different Oracle Homes.Oracleasm library install is done immediately after creating "oracle" linux account and "dba" group to be ready for ASM Instance creating during the first Installer run supposed to build it. ASM instance for disks and disks group management is created the first by Installer along with the disks group for database supposed to be built during the second run of Installer and to be placed into recently created disks group.
I. Oracle 10gR2 ASM and ASMLib 2.0 I/O.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/wtfdata
# chown -R oracle.oinstall /u02
OTN instruction:-
Before installing Automatic Storage Management, it is recommended that you install the optional add-on Automatic Storage Management support library, ASMLib. ASMLib is an application program interface (API) Oracle that is aimed at simplifying the interface between the operating system and the database, and to exploit the capabilities and strengths of storage arrays provided by different vendors ASMLib provides an alternative interface for the Automatic Storage Management-enabled kernel to discover and access block devices. It provides storage and operating system vendors the opportunity to supply extended storage-related features. These features provide benefits such as improved performance and greater data integrity.
OTN instruction ends.
3.To install ASMLIB 2.0 run as root:-
# rpm -Uvh oracleasm-2.6.9-11.ELsmp-2.0.0-1.i686.rpm \
oracleasmlib-2.0.0-1.i386.rpm \
oracleasm-support-2.0.0-1.i386.rpm
Now you get /etc/init.d/oracleasm ready to go.
Configuring the Oracle ASM library driver:-
# /etc/init.d/oracleasm configure
Default user to own the driver interface [oracle]: oracle
Default group to own the driver interface [dba]: dba
Start Oracle ASM library driver on boot (y/n) [y]: y
Fix permissions of Oracle ASM disks on boot (y/n) [y]: y
Writing Oracle ASM library driver configuration: [ OK ]
Scanning system for ASM disks: [ OK ]
# /etc/init.d/oracleasm enable
Create ASM disks as desired utilizing command:
# /etc/init.d/oracleasm createdisk VLM0X /dev/sdx
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login, /etc/profile.
and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
OTN instructions:-
Its recommended that you install Automatic Storage Management in its own Oracle home, regardless of whether you plan to only have one or multiple database instances.Installing Automatic Storage Management in its own Oracle home helps ensure higher availability and manageability.With separate Oracle homes, you can upgrade Automatic Storage Management and databases independently, and you can remove database software without impacting the Automatic Storage Management instance. Ensure that the Automatic Storage Management version is the same or later than the Oracle Database version.If an Automatic Storage Management installation does not already exist and you select the Oracle Universal Installer option to install and configure Automatic Storage Management only, then Oracle Universal Installer installs Automatic Storage Management in its own Oracle home.
OTN instruction ends.
Select " Advanced installation" and
create ASM instance in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1
Create disk group during this run .
Exit installer.
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed into existing disk's group in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_2 .
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database MastDB flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control URL
http://ServerCentOS41:1158/em). Create new disk's group for flashback recovery area and modify corresponding value on Recovery Settings page of EM.
System startup in this case should look like:-
[oracle@ServerCentOS41 ~]$ ./lsnrstart
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:41
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 30-AUG-2005 17:57:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_2/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=ServerCentOS41)(PORT=1522)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 30-AUG-2005 17:57:42
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_2/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_2/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=ServerCentOS41)(PORT=1522)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@ServerCentOS41 ~]$ dbstart
Processing ASM instance "+ASM": log file /u01/app/oracle/product/10.2.0/db_1/startup.log
Processing Database instance "MastDB": log file /u01/app/oracle/product/10.2.0/db_2/startup.log
[oracle@ServerCentOS41 ~]$ emctl start dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://ServerCentOS41:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ........................ started.
Logs are generated in directory /u01/app/oracle/oracle/product/10.2.0/db_2/ServerCentOS41_MastDB/sysman/log
Install described above was done with different Oracle Homes
for ASM instance and ASM-database.
To put ASM instance and ASM-database in same Oracle Home.
Start runInstaller just once to build all stuff at a time.
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced option" and install "Software only"
in ORACLE_HOME - /u01/app/oracle/oracle/product/10.2.0/db_1.
Modify oracle's .bash_profile:-
export ORACLE_HOME and new PATH.
Source new .bash_profile:-
$. ~oracle/.bash_profile
$dbca
During this run the request to start CRS daemons by root will come up.
# $ORACLE_HOME/bin/localconfig add
ASM instance , needed disk's groups and ASM-database itself will be created.
Then perform listener and local TNS names configuration.
$netca
II. Oracle 10gR2 ASM and Standard Linux I/O.
This method creates Oracle database files on raw character devices managed by ASM using standard Linux I/O system calls.It requires to create RAW devices for all disk partitions used by ASM.
1.Install CentOS 4.1
2.Run as root:
# groupadd dba # group of users to be granted SYSDBA system privilege
# groupadd oinstall # group owner of Oracle files
# useradd -c "Oracle software owner" -g oinstall -G dba oracle
# passwd oracle
# mkdir -p /u01/app/oracle
# chown -R oracle.oinstall /u01
# mkdir -p /u02/oradata/data
# chown -R oracle.oinstall /u02
Just as an example create 4 partitions:
/dev/hda6,/dev/hdc6 5 GB each one
/dev/hda7,/dev/hdc7 3 GB each one
Create raw devices modifying file /etc/sysconfig/rawdevices as follows:
/dev/raw/raw1 /dev/hda6
/dev/raw/raw2 /dev/hdc6
/dev/raw/raw3 /dev/hda7
/dev/raw/raw4 /dev/hdc7
Put in /etc/rc.d/rc.local
chown oracle:dba /dev/raw/raw*
chmod 660 /dev/raw/raw*
I was experiencing problems with loosing "oracle:dba" permissions after Linux
reboot. Oracle's raw device came up with "root:disk" ownership after reboot.
Restart Linux
Run as root:-
# service rawdevices restart
Tune /etc/sysctl.conf,/etc/security/limits.conf,/etc/pam.d/login,
/etc/profile and oracle's shell environment as advised in [1].
Login as oracle:-
$ cd /tmp/database
$./runInstaller
Select " Advanced installation" and
create ASM instance in ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/asm
During this run create diskgroup RAWDATA1 with normal redundancy
mirroring /dev/raw/raw1 and /dev/raw/raw2.
You should be fine with discovering raw devices if permissions are in place (oracle:dba)
Exit installer.
Export ORACLE_HOME for ASM instance and corresponding PATH.
Then run "dbca" to create diskgroup RAWDATA2 with
normal redundancy mirroring /dev/raw/raw3 and /dev/raw/raw4
$ ./runInstaller
Select " Advanced installation" and create new ASM-database placed RAWDATA1 diskgroup
in $ORACLE_HOME=/u01/app/oracle/oracle/product/10.2.0/db_1.
Modify ~oracle/.bash_profile correspondently.Relogin as oracle.
Next:-
$ sqlplus /nolog
SQL> conn / as sysdba
Connected.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup mount;
ORACLE instance started.
Total System Global Area 285212672 bytes
Fixed Size 1218968 bytes
Variable Size 88082024 bytes
Database Buffers 188743680 bytes
Redo Buffers 7168000 bytes
Database mounted.
SQL> alter database archivelog;
Database altered.
SQL> alter database rawdbs flashback on;
Database altered.
SQL> alter database open;
Database altered.
Open Enterpise Manager console.(Enterprise Manager 10g Database Control
URL http://ServerCentOS41:1158/em). Put flashback recovery area in RAWDATA2
modifying corresponding value on Recovery Settings page of EM.
References.
1.www.puschitz.com/InstallingOracle10g.shtml
Message was edited by:
[email protected] -
Storage Manager and Windows 2012 Deduplication
Does anyone have Storage Manager working with the deduplicated volumes in Windows 2012? It works fine on 2012 itself, but when I attempt to move data to or from a deduplicated volume I get the following error:
182: the requested operation is not supported.
The error seems pretty self explanatory. But I'm really hoping there's a way to get it working. We're planning to do a complete teardown and rebuild of our storage and this could be a deal breaker for whether we use Storage Manager at all to manage user data.
Engine Version: 3.1.0.4
Windows 2012 Standard
Active Directory Schema Not ExtendedOn 4/17/2013 10:46 AM, scunha wrote:
>
> Does anyone have Storage Manager working with the deduplicated volumes
> in Windows 2012? It works fine on 2012 itself, but when I attempt to
> move data to or from a deduplicated volume I get the following error:
>
> 182: the requested operation is not supported.
>
> The error seems pretty self explanatory. But I'm really hoping there's
> a way to get it working. We're planning to do a complete teardown and
> rebuild of our storage and this could be a deal breaker for whether we
> use Storage Manager at all to manage user data.
>
> Engine Version: 3.1.0.4
> Windows 2012 Standard
> Active Directory Schema Not Extended
>
>
scunha,
Could you send an email to [email protected] explaining what
you're doing and providing some details of your deduplication settings?
We'd like to look at this in more detail.
- NFMS Support Team
Maybe you are looking for
-
I am new to Adobe, so forgive the ignorance! I am waiting for my tutorial cd, but meanwhile am working on a form. I have completed the fields (best I know how), but want to make sure that if someone has any Adobe program other than just 'Reader' tha
-
Office Network Issue with MacIntel
OK, this makes sense to me but might be tricky for someone else. I have an office of 7 Macs, all on an ethernet network. We want full access to eachother's Home folders so here's how we connect to eachother: if I want access to John's computer I conn
-
Issue in population of Ship to party house number in Sales Order
Hi Experts, I have created a program that creates an IDOC from the input file and then it uses IDOC_INPUT_ORDERS to create sales order from the IDOC. Now, the input file has Ship to party that is different from the Sale to party. So, I created the ID
-
Adding work order short text to KSBB report
Presently, our budget administrator runs various KSBB reports for showing budget/actuals. For instance, you run the report <i>Plan/Actual Comparisons -> Additional Ratios -> Cost Centers: Act./Plan/Commitments</i>. Then you drill down into the actua
-
[RESOLVED] Double text label on focused button in the Eclipse
Hi! After update in addition to this I get one more thing: in the Eclipse (both in a CDT and in a PDT) labels on a focused button gets doubling now. It looks like this: There is no such an artefacts in other java (and non-java) apps which I have. Any