HP Stream 14 Touchpad & Bluetooth, Help needed.

Hi, ive recently had to reinstall a clean version of windows 8.1 as i didnt have access to recovery media and my recovery partition had been accidentaly removed, i have most things running, but i cant find a driver for the Broadcom BCM43142A0 Bluetooth module, and most importantly, i cant find the correct driver/software to make multitouch guestures work for the ALPS touchpad and give me access to the ALPS touchpad settings, please advise where i can get these two drivers/software from as the hp websites "scan now" for software & drivers responds with "unable to verify", its a HP Stream 14-z050sa. Product number: K0y10EA#ABUProduct name: HP Stream Notebook PC 14BIOS: F.03-11/07/2014 Many thanks,Jordan.

Hi , Welcome to the HP Forums!
It is a terrific place to find answers.
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More I grasp that you lost the recovery partition and did not have access to recovery disks. You did a clean install from a Windows disk and are now looking for the drivers. Here is a link to the HP Stream Notebook - 14-z050sa Drivers for your notebook where you can manually download and install the drivers. If for any reason the drivers do not work, please contact HP support to obtain a recovery kit. Please contact HP support at Contact HP Support I hope this helps!

Similar Messages

Bluetooth Help Needed!

Hi,
Sorry if this is in the wrong place. If you move it can you please message me and let me know as I am new here.
I have windows XP, a nokia 6111 and I have a wireless dongo bluetooth version 3.
I keep getting this error when I try to connect my phone via wireless bluetooth to my laptop:
"Cannot use the connection type. Check that all the needed hardware, software and drivers are available"
I realise people have already asked about this error but my question is does anyone know where I can update my bluetooth stack software as I understand you need version 4 and I'm hoping that will solve the problem if I can find it. I have tried looking but can't see an upgrade anywhere on the Toshiba site for bluetooth stack.
Can someone please help?
Thanks.Message Edited by mush422 on 20-Apr-200707:34 PM

Hiya,
I've sent a PM with a link in
Rick
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Touchpad - Bluetooth audio streaming works Preware Apps, not App store Apps

Hi,
I'm having an issue with any applications I've installed through the App store not streaming over bluetooth.
Any app installed with Preware streams audio just fine.
I haven't tried resetting the touchpad to factory condition..
It's mainly an issue since Grooveshark seems to have been added to the App store and I (stupidly) updated my preware app to the app store one.
No, this is not the only app that doesn't stream over bluetooth.
I am streaming to my Pioneer VSX 821 K.
Anyone have any experience with this issue?
Anyone resolve this issue before?
I tried searching the forums for bluetooth type posts but didn't see anything related.
Thanks
Post relates to: HP TouchPad (WiFi)

FYI, if you've opened the Shazam app, it messes up the bluetooth playback with Pandora (maybe other apps too) you have to close the app completely in order to restore normal audio.
So you might want to close all apps competing for the audio playback, and only do one at a time. Apple and audio players have messed up playback on the iPhone.
Does Google Maps audio work over the bluetooth connection?
Is this a built-in bluetooth or is it an add-on system?

HP Touchpad Accidental Warranty Screwage, next step help needed

Greetings,
We bought my touchpad through HP Shopping . ca because my dad has the employee benefits. We got the touchpad on the 5th of July, and had called back 4 times between then and yesterday to try and get accidental damage coverage. HP Shopping . ca had always said everytime we called that it was not available at this time and try back later. Then I found the HP Warranty app and downloaded it. Seeing the price I assumed it was an american app. Well turns out it wasnt and when we called a new number we found on our own yesterday they said to just download it through the app. Well the magical 30 days expired the night before! We called in Palm Support and they said the one guy said there was nothing he can do. Then we emailed support and got a case number. I then recieved an email asking about how the service was, but never was told the outcome! Now its the weekend and apparently HP doesnt work on the weekend.
What should I do? I dont want the touchpad (or any tablet) if I dont have ADP. I need that in case something happens to it when I am using it for coaching hockey or through work. Should I be demanding to ask for a supervisor? If nothing can work out, what is the return policy on the touchpad?
Help?
Post relates to: HP TouchPad (WiFi)

HP webOS support is open on weekends. I have looked at you record and see your Touchpad device was activated on July 4th 2011, and the option to purchase an ADP plan would have expired 30 days later on the 3rd of August 2011. I also see the only call showing for you at HP webOS support occurred on August 5th 2011 when you were informed that you were out of the 30 day policy period. I am sorry that you though this ADP plan was only for the US; but it covers all of North America.
I can look into this matter for you to see if anything can be done at this point to offer you this plan. If so I will post the reply here as soon as I receive more information, or I will give you a call at your provided phone number. You need to allow 2-3 days for a response.

Help needed with Vista 64 Ultimate

"Help needed with Vista 64 UltimateI I need some help in getting XFI Dolby digital to work
Okay so i went out and I bought a yamaha 630BL reciever, a digital coaxial s/pdif, and a 3.5mm phono plug to fit perfectly to my XFI Extreme Music
-The audio plays fine and reports as a PCM stream when I play it normally, but I can't get dolby digital or DTS to enable for some reason eventhough I bought the DDL & DTS Connect Pack for $4.72
When I click dolby digital li've in DDL it jumps back up to off and has this [The operation was unsuccessful. Please try again or reinstall the application].
Message Edited by Fuzion64 on 03-06-2009 05:33 AMS/PDIF I/O was enabled under speakers in control panel/sound, but S/PDIF Out function was totally disabled
once I set this to enabled Dolby and DTS went acti've.
I also have a question on 5. and Vista 64
-When I game I normally use headphones in game mode or 2. with my headphones, the reason for this is if I set it on 5. I get sounds coming out of all of the wrong channels.
Now when I watch movies or listen to music I switch to 5. sound in entertainment mode, but to make this work properly I have to open CMSS-3D. I then change it from xpand to stereo and put the slider at even center for 50%. If I use the default xpand mode the audio is way off coming out of all of the wrong channels.
How do I make 5. render properly on vista

We ended up getting iTunes cleanly uninstalled and were able to re-install without issue. All is now mostly well.
Peace...

Help needed to loadjava apache poi jars into oracle database.

Help needed to loadjava apache poi jars into oracle database. Many classes left unresolved. (Poi 3.7, database 11.1.0.7). Please share your experience!

Hi,
The first 3 steps are just perfect.
But with
loadjava.bat -user=user/pw@connstr -force -resolve geronimo-stax-api_1.0_spec-1.0.jar
the results are rather unexpected. Here is a part of the log file:
arguments: '-user' 'ccc/***@bisera7-db.dev.srv' '-fileout' 'c:\temp\load4.log' '-force' '-resolve' '-jarsasdbobjects' '-v' 'geronimo-stax-api_1.0_spec-1.0.jar'
The following operations failed
resource META-INF/MANIFEST.MF: creation (createFailed)
class javax/xml/stream/EventFilter: resolution
class javax/xml/stream/events/Attribute: resolution
class javax/xml/stream/events/Characters: resolution
class javax/xml/stream/events/Comment: resolution
class javax/xml/stream/events/DTD: resolution
class javax/xml/stream/events/EndDocument: resolution
class javax/xml/stream/events/EndElement: resolution
class javax/xml/stream/events/EntityDeclaration: resolution
class javax/xml/stream/events/EntityReference: resolution
class javax/xml/stream/events/Namespace: resolution
class javax/xml/stream/events/NotationDeclaration: resolution
class javax/xml/stream/events/ProcessingInstruction: resolution
class javax/xml/stream/events/StartDocument: resolution
class javax/xml/stream/events/StartElement: resolution
class javax/xml/stream/events/XMLEvent: resolution
class javax/xml/stream/StreamFilter: resolution
class javax/xml/stream/util/EventReaderDelegate: resolution
class javax/xml/stream/util/StreamReaderDelegate: resolution
class javax/xml/stream/util/XMLEventAllocator: resolution
class javax/xml/stream/util/XMLEventConsumer: resolution
class javax/xml/stream/XMLEventFactory: resolution
class javax/xml/stream/XMLEventReader: resolution
class javax/xml/stream/XMLEventWriter: resolution
class javax/xml/stream/XMLInputFactory: resolution
class javax/xml/stream/XMLOutputFactory: resolution
class javax/xml/stream/XMLStreamReader: resolution
resource META-INF/LICENSE.txt: creation (createFailed)
resource META-INF/NOTICE.txt: creation (createFailed)
It seems to me that the root of the problem is the error:
ORA-29521: referenced name javax/xml/namespace/QName could not be found
This class exists in the SYS schema though and is valid. If SYS should be included as a resolver? How to solve this problem?

Uconnect music stream issue - bluetooth Dodge Caravan 2011

I have a Dodge Caravan 2011 with uConnect 130s RES. My iphones pair and operate correctly but the music will not stream over bluetooth. The music is intermittent, jerky and operates at about 2X normal speed when I can hear it. Dodge (of course) blames apple. Dodge has no software updates for this uConnect.
Has anyone had this problem?
Any ideas?

Just got my 2011 VW Routan (Same Van just VW) but I am having the exact same issue. It seems from my research that there are a lot of these uconnect systems that are haveing issues with iphones. I can't imagine how it is apples fault when ALL my other BT devices work flawlessly with my iphone. I currently have a 4, getting my 5 in a week or so. maybe it will work better, but i plan to take it in and have it checked. I may try and pair it with one of the vehicls on the lot to see if the issue is consistant. I also read there is supposed to be a software update for the uconnect systems, and if that doesn't work, that they should replace the BT module, if it is even seperate from the radio. either way, they need to make it work they way it is supposed to, like ALL other BT devices seam to work.

RTPManager help needed!!!

Hi,
I am developing a multi-video streaming application. Currently, I have my server send 4 video streams to the clients, using RTPManager (with 4 different processors). The first client will be able to see all four video streams, however, subsequent clients can only see one video stream (normally the last video stream sent from the server).
I am using the RTPManager.addTarget method to add new clients to the server. Can anyone advise me on how to establish that subsequent clients can also view four video streams?
Any help will be greatly appreciated.
Damien

Hi,
I think cloneable DataSource must be used, as seen on page 150 of the JMF API Guide: "When a stream encoded in a single format has to be sent over multiple RTP sessions, you need to clone the DataSource output from the Processor from which data is being captured. This is done creating a cloneable DataSource through the Manager and calling getClone on the cloneable DataSource."
Bye,
Felipe.

Troubleshoting help needed: My iMac keeps crashing and restarting with a report detail: "spinlock application timed out" What can I do to fix this?timed out"

Troubleshooting help needed: My iMac keeps crashing and restarting with a notice: "Spinlock application timed out" What can I do?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Select the most recent panic log under System Diagnostic Reports. Post the contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Help needed I have a canon 40D. I am thinking of buying a canon 6D.But not sure that my len

Hi all help needed I have a canon 40D. I am thinking of buying a canon 6D.
But not sure that my lenses will work.
I have a 170mm/ 500mm APO Sigma.
A 10/20 ex Sigma HSM IF.
And a 180 APO Sigma Macro or do I have to scrap them and buy others.
ALL Help will be greatly received. Yours BRODIE

In short, I love it. I was going to buy the 5DMark III. After playing with it for a while at my local Fry's store where they put 5DMII, 5DMIII and 6D next to each other, using the same 24-105L lens, I decided to get the 6D and pocket the different for lens later.
I'm upgrading from the 30D. So I think you'll love it. It's a great camera. I have used 5DMII extensively before (borrowing from a close friend).
Funny thing is at first I don't really care about the GPS and Wifi much. I thought they're just marketing-gimmick. But once you have it, it is actually really fun and helpful. For example, I can place the 6D on a long "monopod", then use the app on the phone to control the camera to get some unique perspective on some scenes. It's fun and great. GPS is also nice for travel guy like me.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help needed! Raid degraded again!

Hi!
Help needed! I hava made bootable RAID with two S-ATAII 250Gb HDD and its not working! Every now and then at bootup I get a message RAID -> DEGRADED... Must be seventh time! Rebuild takes its own time!
What am I doing wrong!
T: Ekku
K8N Neo4 Ultra
AMD 64 4200+
2 Gb RAM
2 x 250 Gb HDD (Maxtor)
nVidia RAID (in mb)
P.S. I wery SORRY with my poor language!

I'm going to blame the nVRAID because I've seen issues with it in the past. If your motherboard has another non-nVidia RAID solution, use that instead. Using the nVidia SATA ports as BASE or JBOD is fine and dandy but RAIDing always had issues. It's not even a driver issue I think it's just instability. Latest drivers and even boxed drivers never helped. Granted, some will report success with their rig. But on a professional level I've seen nForce issues on different motherboards and different hard drives that had RAID disaster stories.
Good luck and if you don't have another RAID solution, my suggestion would be to buy a dedicated RAID controller card.
LPB

HELP NEEDED WITH ADDAPTER-DVI TO VGA.

PLEASE ...HELP NEEDED WITH WIRING CROSS OVER....CAN YOU HELP WITH BACK OF PLUG CONNECTIONS...I SORTA UNDERSTAND THE PINOUTS BUT CANT MAKE AN EXACT MACH...WOULD LIKE TO BE 100% SURE...
......THIS ENSURES NO SMOKE!!!
THE CARD IS AN ATI RADEON RX9250-DUAL HEAD-.........ADDAPTER IS DVI(ANALOG)MALE TO VGA(ANALOG)FEMALE.
ANY HELP VERY MUCH APPRECIATED........ SEEMS YOU NEED TO BE ROCKET SCI TO ATTACH A BLOODY PICTURE...SO THIS HAS BEEN BIG WASTE OF FING TIME!

Quote from: BOBHIGH on 17-December-05, 09:21:31
Get over it mate !
I find it easy t read CAPS...and if you dont like it ...DONT READ IT!
And why bother to reply...some people have nothing better to do.
Yes there chep and easy to come by...Ive already got a new one.
All I wanted was to make a diagram of whats inside the bloody thing...it was a simple question and required a simple answer.
NO NEED TO A WANKA !!
I feel a bann comming up.
Have you tryed Google ? really.. your question is inrelevant. No need to reply indeed.
Why do you come here asking this question anyway ? is it becouse you have a MSI gfx card ? and the adapter has nothing to do with this ?
You think you can come in here yelling.. thinking we have to put up with it and accept your style of posting. This is not a MSI tech center.. it's a user to user center.. Your question has nothing to do with MSI relavant things anyway's.
Google = your friend.
Quote from: BOBHIGH on 17-December-05, 09:21:31
it was a simple question and required a simple answer
Simple for who ? you (buying a new one) ? me ? we ? .really...........
Quote from: Dynamike on 16-December-05, 04:11:48
1: There are allot of diffrent types of those adapters.
If any of the mods have a problem about my reply.. please pm me.

Help needed for grouping.

Hi,
    Help needed .
I have an internal table having 6 .
Ex :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 10    10
a     aa    12    p1 20    20
b     aa    11    p2 30    30
b     aa    12    p2 40    30
Now i want to sum the fields f5 and f6 individually and need to display based upon the fields f1 and f4.
To Display :
f1     f2    f3     f4    f5    f6
a     aa    11    p1 30    30.
b     aa    11    p2 70    60.
can anyone help me.How to do this..?
Thanks

Here you go
DATA:
BEGIN OF cur_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(2)     TYPE c,
    f6(2)     TYPE n,
END OF cur_tab.
DATA:
BEGIN OF sum_tab OCCURS 0,
    f1        TYPE c,
    f4(2)     TYPE c,
    f5        TYPE p,
    f6        TYPE p,
END OF sum_tab.
DATA:
BEGIN OF final_tab OCCURS 0,
    f1        TYPE c,
    f2(2)     TYPE c,
    f3(2)     TYPE c,
    f4(2)     TYPE c,
    f5(5)     TYPE c,
    f6(5)     TYPE c,
END OF final_tab.
START-OF-SELECTION.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '10'.
cur_tab-f6 = '10'.
APPEND cur_tab.
cur_tab-f1 = 'a'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p1'.
cur_tab-f5 = '20'.
cur_tab-f6 = '20'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '30'.
cur_tab-f6 = '30'.
APPEND cur_tab.
cur_tab-f1 = 'b'.
cur_tab-f2 = 'aa'.
cur_tab-f3 = '11'.
cur_tab-f4 = 'p2'.
cur_tab-f5 = '40'.
cur_tab-f6 = '30'.
APPEND cur_tab.
LOOP AT cur_tab.
    MOVE-CORRESPONDING cur_tab TO sum_tab.
    COLLECT sum_tab.
ENDLOOP.
LOOP AT sum_tab.
    READ TABLE cur_tab WITH KEY f1 = sum_tab-f1
                                f4 = sum_tab-f4.
    IF sy-subrc NE 0.
      WRITE:/ 'Something went very wrong'.
      CONTINUE.
    ENDIF.
    MOVE-CORRESPONDING cur_tab TO final_tab.
    MOVE-CORRESPONDING sum_tab TO final_tab.
    APPEND final_tab.
ENDLOOP.
LOOP AT final_tab.
    WRITE:/1 final_tab-f1,
          AT 5 final_tab-f2,
          AT 10 final_tab-f3,
          AT 15 final_tab-f4,
          AT 20 final_tab-f5,
          AT 25 final_tab-f6.
ENDLOOP.
and the output
a   aa   11   p1     30   30
b   aa   11   p2     70   60

Help needed on installation of Oracle 9i on Sun Solaris 8

Hey,
Help needed on installation of Oracle 9i EE on Sun Solaris 8. The problem I met was: we followed the installation guide from the documentation. And we selected the choice "install software only". After it was done successfully, we run Database Configuration Assistant utility to create a database instance. But finally it always tried to create the instance at the root directory ( / ) which doesn't have enough space and then failed. The case was that we have set the enviroment parameters: $ORACLE_BASE = /export/mydata, $ORACLE_HOME = /export/apps/oracle9i. That means it should be installed at /export/mydata, but it didn't. Any help or advice are welcome. Thanks.
Simon

I have downloaded Oracle 11G R2 version from Windows and extracted it in Windows and copied it into DVD after extraction in two folders. Now I am mounting that DVD in Solaris 10 installed in my VMware . I made a new directory named as 'installation ' under /export/home/oracle and copied the folders from DVD to 'installation' folder. Now I am entering installation folder and try to do ./runInstaller as 'oracle ' user and getting the error mentioned before.
Edited by: 916438 on Mar 31, 2012 5:55 PM

HP Stream 14 Touchpad & Bluetooth, Help needed.

Similar Messages

Maybe you are looking for