Hp stream 8 problem with hp officejet 150 printer

Hi,
I bought a HP Stream 8 tablet(5801ca) two weeks ago and just buy a HP Officejet 150 Mobile All-in-One printer (CN550A) to work with my tablet. This setup is moving in a truck on the road, but I have never been able to set it correctly. Both devices have a bluetooth connection and I installed the drivers correctly (maybe not) but tried again over and over.
My problem is that I can connect the tablet with the printer, I see the printer correctly while printing documents, then I send the command to print, the printer starts up a printing cycle, but jam at the firt line. Nothing is printed and everything bug here. I have to restart both the printer and the tablet to be able to do something again with the printer.
I tried many times with different settings and different installation drivers (with CD coming with the printer and with the driver on hp website). Always had the same problem, then I tought the printer was not good, so I returned it and had a new one, same model. Still the same problem.
So is my tablet having a problem ? Or just some changes in a setting somewhere ? Or maybe, I can't even print on a HP Officejet 150 Mobile All-in-One (CN550A) with a HP Stream 8 Tablet (5801ca) by a bluetooth connection ?
Any suggestion or help would be more than welcome,
Thank you

Hey @Max0m,
Welcome to the HP Support Forum.
I understand you're unable to print using your HP Officejet 150 Mobile All-in-One Printer. I would like to help.
The following article from HP may resolve the issue for you. Click on the heading below:
HP Officejet 150 Mobile All-in-One Printer Series (L511) - Cannot Print through a Bluetooth Wireless...
Try both solutions and if this doesn't pan out, I recommend you call our Cloud Services at 855-785-2777. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Best of luck!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Similar Messages

Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code

unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer. had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address. this one wants job code. i don't believe mac allows for input on job code or printer code for permission to print

I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

Problems with color matching when printing...

Hi, I work for a small family business in the P.O.P. industry. We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200. However ever since acquiring the printer we have begun to run into problems with the colors when printing. When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly. However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them. Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints. After I believe 3+ hours of him trying, I was given the original CD and instructed to try. After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly.
We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4. He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it. When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well. My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment. He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all. I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue? I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
Thanks for your time

I've got a few years experience calibrating large format printers. First, the Yellow sounds like a file problem. I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ). I tend to agree with you in that the OS is probably not the problem. But, any Colorburst profiles should remain in the RIP, not in the originator application. My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ). Your partner may be complicating things by incorporating a RIP profile prematurely. If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption. This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings. Start there. You should seriously consider implementing a calibration system if you do not have one already. Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger. It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles. At the very least, match everything that is currently working successfully and put them on both machines. If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert. Hope this helps.

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
iMac is connected via wirelss to printer/scanner. All was working OK until update.

Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Printing problems with HP OfficeJet G55

I have a MacBook running OS X 10.5.4 and I'm having problems printing with my HP OfficeJet G55. I have updated to HP Printer Driver 1.1.1, but after updating, I realized my printer type was not in the list. So that did not fix the problem. I connect my printer to my computer by USB and as soon as I hook it up, the computer recognizes the kind of printer.
When I go to System Preferences-->Print & Fax--> Open Print Queue, it says "Printer Ready". Then when I want to print out a page and after I hit Print, it says something like Printing 11%,...,100%, then automatically the status of whatever I wanted to print says "complete", but the page has not even printed yet. My printer did nothing. I have tried rebooting, and had the same problem. I have also tried deleting the printer from system preferences/print & fax and then adding the printer again, and it doesn't work.
There is nothing wrong with my printer because I printed out a test page, and it worked fine. Also when it's connected to a desktop computer we have..Windows XP, the printer also works. And even when I connect the printer to my old ibook (I think it's on OS 9.1), it also works.
Please if anyone knows about this, I need instructions on correcting the problem!
Thank you!!

A Gutenprint driver for that model is included in OS X:
http://support.apple.com/kb/HT1370#hpdrivers
I'd guess you have a corrupted file somewhere. Try these generic fixes:
Reset Printing System - In Print & Fax prefs:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/14001.html
Get the downloadable Combination Updater from Apple, use it to re-Update OS X.
Use Disk Utility to repair the HD (see Try Disk Utility):
http://support.apple.com/kb/TS1417
(Final step - reinstall OS X using the Archive & Install option in the installer.)

Problems with hp officejet pro 8610 printing labels

I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.

Hello ,
Welcome to the HP Support Forums!
I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Problem with HP Officejet 8620 (just bought it) not sure if Printer or wireless issue.

Alright so hopefully I have put this in the right forum.
I just bought an HP Officejet 8620, and set it up. It printed the test pages fine yet upon trying to print homework it would dissapear in the Print Queue while saying it was "printing". Thus nothing has come out of the printer except test pages so I am in a bit of a bind.
Now the computer brought up a trouble shoot issue stating "problem with wireless network".
To give some back ground on this issue our previous printer HP Officejet 6500A about a month ago starting printing abnormally slow, and eventually reached a crawl not doing anything.
So im not totally lost, yet as of now do not know what is going on.

Hello Libertine74,
Welcome to the HP Forums.
I see that you are having some connectivity issues when attempting to print wireless.
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with when the Printer Does Not Maintain Wireless Connection.
Please feel free to write me back if you have any other questions or concerns.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problems with HP Officejet Pro L7680

I bought this machine used and immediatly had "jibberish one or two line printing" in MS Windows 7. Tried a new usb cable, hard reset, complete driver removal and reinstall, and setup reset on printer. No change in behavior. I then installed Ubuntu 13.10 operating system. Printing text..perfect. Printing photos..perfect. I have not tried the fax portion as I have no need for faxing. So IMHO the problem is ....MS Windows 7. Since this is an older Officejet Printer I don't believe Microsoft will be addressing the problem except by suggesting a new printer. HP is ditto on that.

Hello ,
Welcome to the HP Support Forums!
I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Streaming Video problems with Latest update of Lion.

Having major issues with streaming youtube videos since the latest Lion update. The videos play halfway through and then just stop, every video that I try. Other news websites that used to play flawlessly are also hanging up. Is this a youtube issue or are others having problems with Lion in regards to videos. iMac Intel

None here.

Scanner and fax problems with the Officejet 7410 AIO

Hi
I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
Thanks
Bye
balubeto

Hi balubeto,
Welcome to the HP Forums!
I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
I would recommend the following:
Run the HP Print and Scan Doctor, to diagnose the issue.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HT4623 Streaming audio problems with io6

Everytime I try to access a streaming aidio site, it will start playing and stop after bout a minute? I never use to have any problems with it on my previous version of software...is anyone else having the same problem?!

I am accessing the site via wi-fi connection...have a BB Bold as well and works fine...

File Stream Open Problem with g++ 3.3.3 and libstdc++.so.5

Hi
I am facing one problem when I complie and run my code
with the following compiler and standard C++ library :
OS Used : SunOS GUILIN 5.8 Generic_108528-13 sun4u sparc SUNW,UltraAX-i2
Compiler Used : g++ 3.3.3
Standard Library Used : libstdc++.so.5
Problem : I am supposed to create 1000 file streams,
but when I run my program, it creates only 254 file streams,
after that assertion occurs!!!!
OUTPUT :
========
$ echo $SHELL
/usr/bin/sh
$
$ ulimit -n
50000
$
$ ./a.out
i : 253
errno : 24
Assertion failed: in, file main.cpp, line 28
Abort - core dumped
$
========
MY CODE :
==================================================
#include <sys/errno.h>
#include <assert.h>
#include <fstream>
#include <iostream>
#include <string>
extern int errno;
const int MAX_STREAM = 1000;
using namespace std;
int main(int argc, char* argv[])
ifstream in[MAX_STREAM];
string file("boo");
for ( int i=0; i != MAX_STREAM; i++ )
in[i].open(file.c_str());
if ( errno > 0 ) {
cout << "i : " << i << endl;
cout << "errno : " << errno << endl;
} // end of "if ( errno > 0 ) {"
assert(in[i]);
return 0;
===================================================
But, if I compile the exactly same program with the
following compiler and run the executable under the
same environment as above, it is running without
any problem and 1000 file streams are created
smoothly without any assertion.
OS Used : SunOS GUILIN 5.8 Generic_108528-13 sun4u sparc SUNW,UltraAX-i2
Compiler Used : g++ 2.95.3
Standard Library Used : libstdc++.so.2.10.0
Anybody can help me to overcome this problem with
g++ 3.3.3 compiler and libstdc++.so.5 library.
With Very Best Regards
Subrata Basak
MediaRing Ltd., Singapore

CVS differentiate text and binary files (they are marked as one or the other by using a CVS option when adding the file). If a file is marked as text, cvs will perform line-end conversion if needed.
On Linux, line endings are coded as LF, whereas on Windows they're coded as CRLF. When you copied files from Windows to Linux, you probably did a binary copy, which left the CRLFs intact. When you checked those files into CVS on the Linux server, Linux CVS did not convert the CRLFs into LFs.
The result of this is that if you check the files out on Linux, they will still contain CRLF (which is wrong for Linux). You may verify this by checking out a file on Linux, then opening it using vi -b. The CRs should show as extra ^M's at the end of each line.
If, on the other hand, you check out the file on Windows, a conversion will take place, where all LFs are converted to CRLF. The result of this is that your file will contain CRCRLF at the end of each line.
The best way to fix this is probably to check everything out on the Linux box, remove every CR from every file, then check everything back in again.

Problem with hp officejet 5510

Hi,
i have problem with my printer ,during the copy or print the display shows this message
"Paper out" but the paper it''s in the printer .
I try the reset of the printer but without success .
How I can do to resolve the problem?
Thank you
Regards
Francesco

Hi Francesco
As you've already tried the resest why not try following this document from Step2 onwards....
Hope this helps,
Ciara
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Hp stream 8 problem with hp officejet 150 printer

Similar Messages

Maybe you are looking for