HP Support Assistant does not think I am connected

as you can see below... I am connected to the internet but not Bluetooth... but this seems to prevent the aupport assistant from thinking it is connected... I cannot submit or work with the support assitant. 

Another problem I'm facing is this one. My iphone gets connected but its unable to surf the internet at all and then would switch back to network connection.
Tried refreshing wifi many times, but doesn't work.

Similar Messages

  • HP Support Assistant does not inform about ANY updates for drivers/softwares

    Hello everyone, HP Support Assistant is not showing ANY sort of updates/messages for latest drivers and softwares although there are updated drivers available for my notebook at the Driver Software Support section from where you can manually download and install them. I'll be updating all my drivers one by one in the morning but ever since I've bought my laptop I've wondered why HPSA has not came to any benefit of mine yet. Is this a known problem? Help is highly respected!Regards.

    Okay so its starting to give updates,  so far I've had 3 updates for HP System Event Utility, Simeplepass and HP Wireless Button Driver.  I guess it works very specifically and on it's own.  No luck on other drivers.

  • HP support assistant does not run on Windows 7

    HP connection manager reports error message upon startup.  Defaults to XP on compatability check.
    Does HP Advisor run on windows 7?

    Here is the latest version of HP Support assistant that is compatible with Windows 7:
    ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68201​.exe
    Here is the link to Windows 7 compatible HP Advisor:
    ftp://ftp.hp.com/pub/softlib/software11/COL34630/p​v-85800-1/sp46210.exe
    I am an HP employee.
    Regards,
    Vidya
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

  • Ios5 does not think i am connected to wifi

    my new macbook pro is the same thing. However, both devices are connected to the interent and I can surf using safari. just some apps will not work. specifically icloud.

    Another problem I'm facing is this one. My iphone gets connected but its unable to surf the internet at all and then would switch back to network connection.
    Tried refreshing wifi many times, but doesn't work.

  • HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

    I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded.  I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid.  I cannnot delete the account because "find my iphone" wants the password linked to this old account.  But when i go into the find my iphone app it is using my corect Apple ID.  How do i fix this?

    If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
    If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account.  You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then  on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

  • OWB 10.1.0.2 repository assistant does not start

    OWB 10.1.0.2 repository assistant does not start.
    It is not great to fail on this very first step !
    Does any one has a clue ?

    Hi,
    OWB 10.1.0.2 is very old version ( actually I never saw that OWB version ) and it should not be available in OTN .
    Did you check with Oracle Tech support guys ? They might give you it from SAIC site , which is internal to Oracle .
    Thanks,
    Sutirtha

  • My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

    If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

  • How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

    How can I copy programs (iWorks) and files from Time Capsule to my HD manually? The problem is that the migration assistant does not recognize my backup file and the user on the TC. (If I open the TC on finder, it it there though)

  • TS3367 Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Hi, the FaceTime just did not work between my mom and I. It used to work weeks ago, but now it does not work after showing"connecting". I feel frustrated and try all the method I can think of. Still do not work. Hope u can help me. Thanks!

    Was it just this one time?  Could be that you, or your mom, were experiencing network problems.  Try again at a later time.

  • How do I remove the Windows partition? Boot Camp Assistant does not allow me to select the remove option.

    I am using an iMac, 8.1, early 2008. I installed Windows XP at that time. I am now using OS 10.8.5 and want to remove the Windows partition to free up disk space. Boot Camp Assistant does not allow me to select the "install or remove" option. How can I get rid of the Windows partition?

    You can try removing it in Disk Utility.
    To resize the drive do the following:
    1. Open Disk Utility and select the drive entry (mfgr.'s ID and size) from the left side list.
    2. Click on the Partition tab in the Disk Utility main window. You should see the graphical sizing window showing the existing partitions. A portion may appear as a blue rectangle representing the used space on a partition.
    3. Select the bottom rectangle/partition. Click on the Delete [-] button below the sizing window to remove it. Click on the Apply button. Wait until the process has completed.
    4. In the lower right corner of the sizing rectangle for the remaining partition is a resizing gadget. Select it with the mouse and drag it all the way down to the bottom. Click on the Apply button and wait until the process has completed. 
    You should now have a restored single volume on the drive.
    It would be wise to have a backup of your current system as resizing is not necessarily free of risk for data loss.  Your drive must have sufficient contiguous free space for this process to work.

  • Migration Assistant does not find My Passport

    I have a new macbook Air that I used at work. I would like to have it synchronized with my personal macbook pro. If it is not possible to have them constantly synchronized, I would like at least to migrate to the macbook air the latest backup of my macbook pro that is in my time machine (my passport).
    Migration Assistant does not recognize the time machine even if it is plugged in. How can I let migration assistant find it?
    Thank you for any information you may provide me!

    I'm having this exact problem myself. I click on the option in Migration Assistant that says I want to transfer data from an external source. After clicking "continue," it just hangs forever. I can see the external drive on my desktop. Any suggestions?

  • Migration Assistant Does Not See Attached External Disk

    I just purchased a MacBook Air to replace an aging MacBook Pro.  Both are running the latest Mountain Lion (10.8.3).  I want to move my files from the MBP to the MBA using Migration Assistant.  I first tried doing this over wi-fi, but when I learned it would take more than 99 hours, I chose to cancel the operation.
    So I connected a new Seagate HD to the MBP and configured Time Machine to back up to it.  I let Time Machine run all day, creating hourly updates after the initial backup.  I then disconnected the drive, attached it to the MBA and rebooted.  I ran Migration Assistant and chose to migrate from a Time Machine backup.  However, Migration Assistant does not see the disk.  Yet the disk is mounted on the desktop, I can read and write to it, and I can see the Time Machine backups.  Only Migration Assistant seems unable to recognize the disk.
    This isn't the first time I've had problems with MA (see my posting history).  When it works, it's terrific - my new computer has all the settings and preferences as the old.  My applications are all registered and operational.  So I'm very frustrated that I can't get it to work with my new MBA.  It really does diminish the experience of getting a new computer.  That, plus I don't want to spend days and weeks moving things over manually, re-installing, etc.
    C'mon, Apple.  Why is Migration Assistant so difficult?  I'd chalk it up to user error, but this many times?

    So, finally after fourten hours of unattended "migration," I let it continue overnight and in the morning found that the time remaining had not moved a minute.  I canceled MA and found that not one iota of data had transferred.
    As far as I'm concerned, Migration Assistant ranks lower on the Apple success list than Open Doc, Newton, Pink and Taligent.
    Now I have to manually install software I want to use on the MBA, apply licenses, and all the other stuff I would expect from Windows.
    NOT happy.

  • Migration assistant does not recognize time machine backup

    Hi Guru,
    I made a time machine backup today, 10.8.2, then made full reinstall of system in Apple store, in Berkeley, because my iMac experinced some unstability.
    we installed new Mac OS, and now I face a  problem: migration assistant does not recognize hard disk with buckup.
    Finder sees this disk, it has Backups folder.
    OS: 10.8.2
    BackUp made: Time Machine 10.8.2
    Hard Disk: Lacie 500MB
    any ideas?
    Thank you

    I am conserned about restoring using setup assistant because I need to transfer personal files and applications only.
    You can do that in Setup Assistant.
    Migration Assistant doesn't accept Time Machine backups of the computer it's running on; it only accepts compatible backups of other computers. You can't migrate a system to itself. To restore files from the same computer, enter Time Machine in the usual way, or else boot into Recovery and either restore the whole startup volume or erase, reinstall OS X, and restore in Setup Assistant.

  • AirPort Setup Assistant does not find AirPort Extreme

    Hello,
    I am trying to stream music to my home stereo. My setup is exactly like the one displayed on page 17 of http://manuals.info.apple.com/en/AirPortExpress_Setup_Guidev4.2.pdf
    AirPort Setup Assistant shows my AirPort Extreme, but not the AirPort Express. I did hard-reset the AirPort Express several times, but the light stays amber and the Setup Assistant does not discover the AirPort Express.
    Until I changed the configuration (prior I had an AirPort Express only), I was able to use a shared network with a PC, so I don't believe the AirPort Express is defective.
    Is there anything else I can do?
    Thanks,
    Fidelio

    P.S.
    I was able to solve my problem. It turned out that the AirPort Express software was outdated. So I connect directly, using an Ethernet cable, to the Ethernet port of the AirPort Extreme. Then used the AirPortExpressFWUpdater.dmg to upload the latest software. Finally I followed the instructions posted by Tesserax at http://discussions.apple.com/message.jspa?messageID=5342301#5342301 and it worked.

  • My HP Support Assistant is not working?

    My HP Support Assistant is not working?

    Hi,
    Try the following
    First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    When this has completed, restart the PC.
    Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    After the installation, restart the PC again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Load SMP.swf in other .swf and pass parameters to it

    Hello, I am able to load the StrobeMediaPlayback.swf within my main .swf application, but I have no idea how to mimic the flashvars behaviour : how can I provide it with the source of the video wanted, etc ? Thx

  • Sign in..and then?

    Hi, all.  I'm trying to make use of the client name that's signed in.  You will find the application.cfm and loginform.cfm files below.  What I can't figure out is how to use the exact user that is logged in.  The usernames are in a database, and eac

  • IPhone 5s and OS X 10.6.8

    My iPhone 5s is not recognized by a Mac Mini running OS X 10.6.8.  The USB port is working as it is charging the phone, but OS X does not display anything.  What do I need to do to connect to the iPhone? Thanks, Jeff

  • Domain Re-Directs

    Appologies if this is in the wrong place but i'm not really sure where to start. I dont do a lot of web developing so wondered if someone could answer my question. A friend of mine has got a website but he wants to use a domina alias. For example he

  • Renamed Distributed App Shows Old Name in Monitor

    In SCOM 2012 I renamed a distributed application. The new name is correct in the authoring view but in the monitor it still shows the old name. I tried clearing the cache but that did not fix anything. I exported the management pack where the distrib