HP Support Assistant For Windows 7, Vista, and XP

This is for all of you looking to find HP Support Assistant for various versions of Windows 7, Vista, and XP.
The link is http://h18021.www1.hp.com/helpandsupport/hp-self-support.html
Good luck installing!
This question was solved.
View Solution.

For Windows 7 and Windows 8 only_Go to Control Panel, Programs & Features.Select HP Support Assistant and uninstall it. Restart your machine after removing it.
Next download the latest version for your machine from the link:
http://h71036.www7.hp.com/hho/us/en/pclc/articles/hp-support-assistant.html?jumpid=ex_r602_go/hpsupp...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

ThinkVantage Active Protection for Windows XP, Vista, and 7 missing from driver matrix

Recently, while checking the Software link: http://support.lenovo.com/ca/en/documents/ht037696
I noticed:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8 (32-bit), 7 (32-bit), Vista (32-bit), XP, 2000
12 Mar 2014
v1.79.0.3
Windows 8 (64-bit), 7 (64-bit), Vista (64-bit)
09 Mar 2014
v1.79.0.3
If you try to follow the links to the ThinkVantage Active Protection System, you are presented with a document labeled: ThinkVantage Active Protection System for Windows 8 (32-bit) - Laptop or a document labeled: ThinkVantage Active Protection System for Windows 8.1 (64-bit) – Notebook
No reference to Windows XP, VISTA or Windows 7 in the current version of the documents, yet the text file pointed to by the download links states that this driver still supports all the older ThinkPads and is applicable to Windows 7 and VISTA. The text file does say that Windows XP support has been withdrawn with this release, and that XP users should use the previous version. It does not, however, provide a link to any document or mechanism where an XP user can obtain the previous driver.
So, is the document correct, or is the text file correct?
Where is the current driver for VISTA and Windows 7?
When I went to the support sites to see the supporting documents there, I discovered that the ThinkVantage Active Protection entries were gone from the R61, R500 and T500 driver matrices. The only reference I could find to the ThinkVantage Active Protection System was in the above mentioned SOFTWARE link.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Still no change to the driver matrices. ThinkVantage Active Protection is still missing. There has been a change in the web site, as follows:
Active Protection System
Like an airbag's sensor, it can detect sudden changes in motion and temporarily stop the hard drive to help protect your valuable data from some crashes that could occur due to everyday notebook accidents.
Windows 8.1 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8.1 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 8 (64-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (32-bit)
27 Jan 2015
v1.80.3.0
Windows 7 (64-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (32-bit)
27 Jan 2015
v1.80.3.0
Windows Vista (64-bit)
27 Jan 2015
v1.80.3.0
So now there are numerous separate entries, but none of them claim to support any 'legacy' machines. Most of the above entries point to the same driver (at present). The puzzling aspect to all this is that if you read the text documents that accompany most of the above driver packages, you will note that the text document claims that the driver supports quite a number of legacy machines. That information just never made it to the web page.
So do I manually update a driver because the text document says it is applicable to my legacy R500, or 'believe' the web page which states that only some current models are supported, but not the R500, T500 or R61.
Very inconsistant and highly unprofessional.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

HP support assistant encountered a serious problem and need to close.

Hi, When i install windows 10 upgrade from windows 7 64bit on July 29, my HP support assistant works perfectly until few days it wont open and says "This application has encountered a serious problem and must close. Click OK to automatically restart this application." But it wont open. Do i need to uninstall and reinstall the problem or do i have to download HP support assistant for windows 10. Pls advice. HP pavilion DV7 quad core 1.6 ghz 64bit 8 gb ram 64bit model 4080us windows 10 upgrade 64bit from windows 7 64bit. thanks

oh yeah and when i go to uninstall it from add\remove programs when the wizard comes up and is running i get that same error and needs to close message, but i doenst effect the uninstall wizard(i dont think)........PLEASE HELP

Jabber for Windows 9.1 and WebEx Voicemail Tab

Guys
we are using both Jabber for Windows (9.1) and WebEx connect clients. both connect to WebEx cloud services. when we use WebEx connect we have all features including voicemail but when we use Jabber for Windows there isnt any voicemail option at all present.
both are doing phone integration and everything else is working fine.
Now when we do the same for our andriod tablets we have the option for voicemail.
i understand that there are several feature differences but based on the searches ive been doing, voicemail should be present and i havent actually seen anyone having this problem. Note, this is using WebEx not CUPS.
i know im probably missing something completely here.
thanks again

Do these users all have a conferencing profile assigned to them in CUCM (9.0) or CUPS (8.x)?
Regards,
Erik
Sent from Cisco Technical Support iPad App

PS Elements 5.0 & Premiere 3.0 for Windows XP & Vista? Will old version work on Windows 7?

Have Photoshop Elements 5.0 and Premiere 3.0 for Windows XP & Vista. New computer Windows 7, can I do upgrade to 12 of both photoshop & premiere elements?

You wioll be better off financially to buy the boxed version from Amazon. It is only $88 according to this:
Click on the above picture to go to Amazon Website to see the latest price on the product.

Is there a 32 Bit edition available for windows server 2012 and windows server 2008

Dear All,
Is there a 32 Bit edition available for windows server 2012 and windows server 2008?
Regards,
Ahmed

Hi,
Quote：
All editions of Windows Server 2008 R2 are 64-bit only.
Reference link below(session Supported upgrade paths):
https://technet.microsoft.com/en-us/library/dd379511(v=ws.10).aspx
And based on MS official description about system requirement for Windows Server 2012/2012 R2, we may find out that they only has 64 bit OS.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Administration Assistant for Windows Startup/Shutdown Options

I run 10.2.0.1.0 and use Administration Assistant for Windows.It worked fine Then the error was: Snap-in failed to initializeName:<unknown>CLSID:{50D06DC1-CFFE-11D1-8271-00C04FD945C7} Everything with environment variable PATH appeared to be correct I was forced to reinstall Administration Assistant for Windows Now it starts fine but when I Right-click the SID Startup/ShutdownOptions is not available in drop down menu. Menu is: Connect database,Disconnect database, New window from here, Help. Any suggestions how to restore Startup/Shutdown Options in drop downmenu Thanks in advance

Have you tried opening the Windows Service dialog, right-clicking on the database service and selecting Start? What about from the command line:
c:\%ORACLE_HOME%\bin\sqlplus
connect / as sysdba
startup
Alison

HT1899 Hi There. Is there a version of BootCamp support software for Windows 8 Customer preview?

Hi There. Is there a version of BootCamp support software for Windows 8 Customer preview as yet?

8 is now Release Preview, not CP, and there is the final release 90-day trial Enterprise which is all cleaned up and ready to use.
So at least someone should be going over with this by now. Things I had that did not work right and unsupported with the Previews are working, but some, a few, need updates.
I don't think most of the issues people have with Mac running 8 are deal breakers or can't be worked around, maybe 2-3 items and heck even 'supported' - if it worked plug and play and no issues... the forum would be dead silent, but it isn't.
Not going to do it again but I have tried to post a consolidated of trackpad, graphics, audio, BT, and other things that get mentioned.
8 won't be ready to buy for full two months.

Administration Assistant for Windows -- No threads in process window.

When I run the Administration Assistant for Windows and attempt to view the Process Information window, no threads are ever displayed.
I have tried using operfcfg to set username and password, but is has not helped.
Has anyone seen this?

Your question is not clear to me... Can you explain properly ? 10g Installation is failed on XP? or Any specific components was failed...?

I use i-tunes on Windows network using Windows 7, Vista, and XP. I now get an error on the XP machine the library was created on a newer version of I tunes, yet apple update on that machine say all up to date.

I use i-tunes on a Windows Network with pc's using Windows 7, Vista, and XP. After recent Apple updates the XP machine says i-tunes library created on a newer version of i-tunesand does not load. The Apple uppdater on the XP machine returns all software up to date. How do I get the XP machne to recognise the library?

For general library squiffiness following an upgrade or crash the easiest thing is to restore your last backup, but I guess if it were that simple you wouldn't be here.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these andcopy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
PS There is also a new iTunes build to download today, so might be worth getting that. A new iTunes should always load an older library file.
tt2

MPIO versions for Windows 2008 SP1 and R2?

Where can I find a list of the latest versions numbers of MPIO for Windows 2008 SP1 and R2?

Hi,
Do you mean the latest version of mpio.sys file?
After search I think the latest version of mpio.sys is 6.1.7601.21687, Date is 19-Mar-2011.
For all supported x64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
156,544
19-Mar-2011
07:34
x64
Mpio.sys
6.1.7601.21687
156,544
19-Mar-2011
07:45
x64
For all supported IA-64-based versions of Windows Server 2008 R2
Collapse this tableExpand this table
File name
File version
File size
Date
Time
Platform
Mpio.sys
6.1.7600.20928
353,664
19-Mar-2011
06:52
IA-64
Mpio.sys
6.1.7601.21687
353,664
19-Mar-2011
06:50
IA-64
For more information please refer to following MS articles:
"0x000000D1" Stop error occurs in the Mpio.sys driver in Windows Server 2008 R2
http://support.microsoft.com/kb/2511962
"msdsm.sys” and “mpio.sys" files version after SP2 installation
http://social.technet.microsoft.com/Forums/en/winserverClustering/thread/c18b5111-9888-4aba-bda5-22a54b7227d9
Lawrence
TechNet Community Support

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work.

I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.

Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

SCM update for Windows 8.1 and Windows 2012 R2

Hi,
When are we likely to get an update to SCM for Windows 8.1 and Windows 2012 R2?

Hi
you must add these lines in ZTIGpoPack.wsf (for MDT) and LocalGPO.wsf (for LocalGPO), and for MDT 2013, copy ZTIGpopack to Deploymentshrare\Scripts
sOSVersion = oEnvironment.Item("OSCurrentVersion")
            If (Left(sOSVersion,3) = "6.3") and oEnvironment.Item("IsServerOS") then
                    sOS = "WS2012R2"
                    oLogging.CreateEntry "Using Windows Server 2012 R2 GPO Pack", LogTypeInfo
            ElseIf (Left(sOSVersion,3) = "6.3") and Not(oEnvironment.Item("IsServerOS")) then
                    sOS = "Win81"
                oLogging.CreateEntry "Using Windows 8.1 GPO Pack", LogTypeInfo
Regards
Thanks for this, but you also need to update the GPOPack.wsf in (each relevant) template folder of the Deployment Share like this:
        If(Left(strOpVer,3) = "6.3") and (strProductType <> "1") then
    strOS = "WS12R2"
        ElseIf(Left(strOpVer,3) = "6.3") and (strProductType = "1") then
    strOS = "Win81"
        ElseIf(Left(strOpVer,3) = "6.2") and (strProductType <> "1") then
    strOS = "WS12"
        ElseIf(Left(strOpVer,3) = "6.2") and (strProductType = "1") then
    strOS = "Win8"
As ZTIApplyGPOPack calls GPOPack.wsf.
(Which is what I think Scorpio92 probably meant when you said to edit LocalGPO.wsf...)

HP Support Assistant For Windows 7, Vista, and XP

Similar Messages

Maybe you are looking for