Hp support assistant has stopped working windows 8
My HP Support Assistant has stopped working. I have read other comments on the forum concerning this problem and attempted to follow their advice. But I am still having the same problem. I uninstalled the HP support in the Control Panel uninstall programs. I restarted my computer then reinstalled the HP support. When installing it asked if I wanted to write over all of the files because HP files were still on my computer. Apparently it did not fully uninstall. I emptied my recycle bin and cleaned out my registry after I tried to uninstall the HP file again. Went back and reinstalled HP support again. This time I did not get the message that it was already installed and do I want to overwrite the files. I thought that the problem was solved but it is not. I cannot get the HP support to work at all. Please can anyone tell me what to do. I am not very savvy with computers and sure use some help.
My computer is an: HP Envy 20 TouchSmart 20d011 - using Windows 8.
I had this problem with another HP computer and called Tech support and they told me to completely restore my computer and then my hard drive crashed. I had to send the computer back an purchased this one. But now dejavu all over. Thank you for any response to my question.
Hi
Here are few links given below might help you to fix your issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03601631
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02028499
http://www8.hp.com/in/en/support-topics/windows8-support.html
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Similar Messages
-
My HP support assistant has stopped working
I click on the HP ? HP Support Assistant Icon and get HPSF.exe has stopped working
below that This application has encoutered a seriousproblem and must
clouse. Click "OK" to automaticallyrestartthis application.Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the PC.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the PC again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Continuous Error Message: Dell Support Center Has Stopped Working
I have Windows V8ista on an Inspiron530s. Through out any operation I continue to get the following massage:
"Dell Support Center Has Stopped Working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." For several weeks I have tried to find the reason for getting the error message. It will appear in a little box several times an hour during any operation. (internet or document) I can find no answers in any forum. I have an HP all-in one printer that I uninstalled & reinstalled the software for at the suggestion of another, but that did not solve the problem.
AT THE SAME TIME: I have Trend Micro Internet Security,(aka PC-Cillion) and though the firewall & defenses are up, I can not get it to scan the computer for virusus. I have talked with Trend Mico Tech Support 4 times on the phone and various adjustments have been made, but thhas been no fix. They seem to think the problem is connected to this error message. I am at wits end. Can someone help?? :?/Ivy,
You never did tell us what version of Windows you're using. If it's XP, look in Windows Scheduled Tasks. If Dell Support Center is listed there, delete it.
Are you really sure you removed Support Center in Add/Remove Programs control panel?
According to Alexandra, one of the forum VIPs:
"The newest DSC 3.0 makes things complicated becomes it comes in 2 parts. There's a 1+MB program called aulauncher.exe that apparently checks for compatibility, plus any current/old versions to be overwritten or uninstalled. Only if the PC passes the aulauncher "test" do you get the full 40+MB DSC install program. That's possibly the reason for "you already have the latest version". Aulauncher also adds a "run once" key to the registry. If the aulauncher doesn't get it right, you're stuck in a loop."
And see if there's anything helpful here, though the links in Dell-Telson's post might be out of date.
Ron -
When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."
I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
Windows 7 - 'iTunes Has Stopped Working' Window Repeatedly Popping Up
Hi there, I've encountered a problem that I couldn't fix myself so I'm hoping someone can impart with some knowledge.
The dreaded 'iTunes has stopped working' window pops up constantly, and continues to reappear again and again. Even navigating to this forum, finding the right place to post and typing this very question is a pain as it has popped up about 7 times since I started typing it. If I leave my laptop alone for a few minutes, I come back and there's about 15 windows open saying the same thing. This is super annoying as I'm trying to get some work done, but any ounce of productivity I have is stifled by this. I am very close to headbutting the screen before I throw my laptop into oncoming traffic on the street below.
I've tried restarting the system, shutting it down and leaving it off for a bit, ending any iTunes-related processes in Task Manager but all have failed.
I'm using Windows 7 Home Premium 64-bit SP1
HP Pavilion G6
4GB RAM
Any help will be greatly appreciated, thanks.Hi there 46Villan,
I understand that you are seeing an issue with iTunes for Windows and you are getting a recurring error message on your computer. I understand how this would be frustrating to you and would stifle productivity. In order to help you troubleshoot this issue, I suggest that you perform the steps found in the following article:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
http://support.apple.com/en-us/HT203206
If the issue continues after attempting those steps, you may need to consider uninstalling then reinstalling iTunes and its related components completely:
Remove and Reinstall iTunes and other software components from Windows XP - Apple Support
http://support.apple.com/en-us/ht1925
Thanks for coming to the Apple Support Communities!
Cheers,
Braden -
Itunes has stopped working Windows is checking for a solution ....
After I just upgrade my itunes and restart the computer I click on itunes and get a message itunes has stopped working Windows is checking for a solution to the problem….’ This is then followed by another message ‘a problem caused the programme to stop working correctly. Windows will close the program and notify you if a solution is available.’
I try to open in "safe mode" and getting the same message.
I am trying to figure out what to do about my son's itouch he has lost it/stolen at school. Feeling worried and would like to be able to get in my itunes account now.This is the simplest fix, if you're still having a problem with it. I had the same problem, am running Windows 8.1. Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Let me know if you have a problem. -
What is this : "Firefox has stopped working Window is chcking for a solution to the program"
I am Using Mozila 3.6.3 , I am so happy with this version. But Many times it show error
"Firefox has stopped working
Window is checking for a solution to the program"
and then it show
""Firefox has stopped working
A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is Available."
| Close Program |"
How i solved out itYour Firefox 3.6 is apparently crashing or hanging.
Firefox 3.6 is no longer supported and is not secure, so you are increasing the risks to your computer and personal data. It is probably a good time to upgrade to Firefox 14 from http://www.mozilla.org/en-US/firefox/all.html
Do not use any option from Windows or firefox that offers to remove personal data (because that destroys bookmarks, passwords and settings). If you have problems once you install a recent version you may neeed to look at
* [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] -
HP Support Assistance have stopped working/desktop. and have not worked in weeks
This computer have many problems, HP Support Assistance have stopped working, and Hp Quick Start have also stopped working-every time the support assistande update programs it stop working-and no matter what I do for quick start it never works. I have refreshed the computer many times only to loose my progrems and they are
hard to get back- and when I recard them on a dvd they looks unreadable and will not download on the computer my computer is
HP Pavilion p7-1446s Desktop the model Number is H3Z36AA#ABA The S/N is {Personal Information Removed}. windows 8.
Microsoft said I could download windows 8.1 free but when I did they put the price up to 119 dollards what is it-
is it free or do I pay.another problem is Rundll have problems starting. What can i do and can you help me??Hi anne_1, Sorry to hear that you are having issue with your Pavilion computer. I have done some research for you and I have a link that will take you to download the updated Support Assistant. http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5297...
If you would like to download and install the updated version of Windows 8.1 ,here is the link that will take you to the free download. http://www8.hp.com/us/en/ad/windows-8/upgrade.html
If this does NOT resolve the issues that you are having, please feel free to write back and I will be happy to offer more assistance.
Thank you in advance
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
I get a message every time I truro sync it says iTunes has stopped working windows will contact you if a solution is found.
I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.
-
Skype 7.7.103 'Skype has stopped working' - Windows 7
I have tried solutions offered by similar posts, but have failed to come up with a solution that works. http://community.skype.com/t5/Windows-desktop-client/Skype-7-7-has-stopped-working/m-p/4055780#M357080 I have a newly built PC with Windows 7, and when we upgraded to Skype 7.7, it has consistantly given the "Skype has stopped working" message every time I try to use it. I have my DxDiag results attached. Here is the error log entry from my Event Viewer...Faulting application name: Skype.exe, version: 7.7.64.103, time stamp: 0x55b7d8d0
Faulting module name: KERNELBASE.dll, version: 6.1.7601.18869, time stamp: 0x556363bc
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x15e8
Faulting application start time: 0x01d0d2f5e88be243
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll Any help would be greatly appreciated. Thanks!teflontree wrote:
Faulting application name: Skype.exe, version: 7.7.0.103, time stamp: 0x55b7d8c2Faulting module name: KERNELBASE.dll, version: 6.1.7601.18869, time stamp: 0x556363bc
Exception code: 0xe06d7363
Fault offset: 0x0000c42d
Faulting process id: 0x848
Faulting application start time: 0x01d0d476203aae3f
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\syswow64\KERNELBASE.dll
Report Id: 63e01523-4069-11e5-af32-902b3439af4c Thanks for your time and help with thisThe same error message as here, so the solution will also be the same. http://community.skype.com/t5/Windows-desktop-client/Skype-7-7-103-Skype-has-stopped-working-Windows-7/m-p/4077205#M361163 -
Adobe Download Assistant has stopped working (CS6/5 trial)
Sorry if this has already been posted elsewhere but i could really use someone’s help. Also sorry if it's slightly in the wrong forum.
My operating system is Windows 8
I've been trying to download the trial version of Premier Pro (CS6) and I am having a problem with the Download assistant as the title suggests. I have attempted to download the file at least 10 times now, the download process bar will get so far (it varies from near the start to the middle or right towards the end of the download). The Download Assistant will then bring up a message saying that the programme has stopped working. I have tried uninstalling and re-installing the Download Assistant and have tried restarting my computer various times. I have read some people saying that they think it could possibly be lack of memory however this cannot be my cause as I am installing on a brand new computer with a mass amount of free memory.
Would fully appreciate any help anybody could give me.
Thank youYou might try the Forum for Download & Install & Setup problems
http://forums.adobe.com/community/download_install_setup
Chat http://www.adobe.com/support/download-install/supportinfo/ -
ITunes has stopped working (windows 7)
Problems when accessing iTunes store with error message iTunes has stopped working.
Problem signature is:
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.1.0.56
Application Timestamp: 4ce4a7b6
Fault Module Name: atiumdag.dll
Fault Module Version: 7.14.10.532
Fault Module Timestamp: 46eb3a74
Exception Code: c0000005
Exception Offset: 00078f50
OS Version: 6.0.6001.2.1.0.768.3
Locale ID: 2057
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
Can you help?I've also been getting the "itunes not working" message since yesterday when I try to import a cd or music files from a folder. After that message, itunes closes.
That's a different issue, das.
First you need to check your precise version number. In iTunes, go "Help > About iTunes", and wait for the version number to scroll up from the bottom.
If it says *iTunes 10.1.0.54* , we need to update you to version 10.1.0.56 .
If you have 10.1.0.54 installed, 10.1.0.56 probably won't appear for you in Apple Software Update. So you'll need to download the 10.1.0.56 installer from the Apple Website, as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591] -
10.2.1 error "iTunes has stopped working" Windows 7 with audio CD
Hi! Hoping someone can help me with this one. Just upgraded to 10.2.1.
iTunes opens ok but if I put in an audio CD, I get the windows error "iTunes has stopped working." It checks for help and then it states "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." Then it closes.
Any ideas?
Thanks!Here it is:
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
Dell Inc. Inspiron 570
iTunes 10.2.1.1
QuickTime 7.6.9
FairPlay 1.11.16
Apple Application Support 1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.4.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0028A5A8034DDBA8
Current user is not an administrator.
The current local date and time is 2011-04-07 20:35:42.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4200
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.2.1.1 (x64) is currently running.
iTunesHelper 10.2.1.1 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
D: TSSTcorp DVD+-RW TS-H653H, Rev D400
Audio CD in drive.
Found 18 songs on CD, playing time 78:37 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:12:47
Track 3, start time 07:55:58
Track 4, start time 11:40:28
Track 5, start time 15:29:22
Track 6, start time 20:37:56
Track 7, start time 25:54:27
Track 8, start time 29:58:64
Track 9, start time 35:45:17
Track 10, start time 40:25:27
Track 11, start time 46:05:25
Track 12, start time 49:56:00
Track 13, start time 53:45:22
Track 14, start time 59:38:65
Track 15, start time 63:30:13
Track 16, start time 67:17:33
Track 17, start time 71:04:38
Track 18, start time 74:46:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8. -
Hello,
Up until recently, Photoshop & Illustrator stopped working. When I would open the program it would begin to load and then come up with the message ' Adobe Photoshop has stopped working'
After which there would be another message ' Windows is checking for solution to the problem'
and then finally ' A problem caused the program to stop working correctly, windows will lose the program and notify you if a solution is available.'
Indesign on startup seems to load normally and is fine.
Do help, time is of the essence.
Thank you,
Tanya
[email protected]This is the simplest fix, if you're still having a problem with it. I had the same problem, am running Windows 8.1. Just be sure to reboot after you copy the dll (dynamic link library) file indicated.
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
Let me know if you have a problem. -
APPCRASH - "Crystal Reports has stopped working"- windows message
Hi,
I had installed Crystal reports 2008 using valid license keycode on Windows Server 2008 machine ( crystal software not registered it in Sap portal for additional support) This was used for crystal reports development in .Net for few days, After 1 month or little more , the crystal reports stopped working and when launched from Start -> Programs -> Crystal Reports 2008 displayed a windows error message " Crystal Reports has stopped working ".
Following is the details about Problem from windows message
Problem Event name: APPCRASH
Application name: crw32.exe
Application version : 12.0.0.683
Fault Module Name: x2rpclB5.dll
Exception Code : c0000005
OS Version : 6.0.6001.2.1.0.274.10
I Uninstalled and reinstalled the application with valid license keycode and registered as well, but still the error remains same when the application is started.
Kindly suggest on how to resolve this issue.Please note that this forum is dedicated to topics related to custom application development or deployment with Crystal Reports in .Net. This includes full versions of Crystal Reports as well as those versions of Crystal Reports bundled with Microsoft Visual Studio .Net.
Reports design, Crystal Reports (exe) installation and other issues should be posted to the [Report Design forum|SAP Crystal Reports;
Now, looking up the DLL,(x2rpclB5.dll) it appears to be a Xerox printer driver(?). You mention that this started to happen recently, so the question would be; was a Xerox printer driver installed? Also, see if either uninstalling the printer driver or installing any available updates fomr Xerox will resolve the issue.
Ludek
Maybe you are looking for
-
Hi.. Please send me configuration steps of Free Goods in Third Party.. Thanks in Advance Shriniwas
-
Ipod touch 4- Power button and volume buttons not working!!!
I had my ipod touch 4 on beside me and i went to turn it off and it wouldn't. I then tried to increase the volume but that wouldn't work. A few minutes before i was on youtube watching videos and there was not problem.Please if you have any idea on w
-
Hi Experts, Good day All! Query has been developed which is working fine and one of the wage type component need to restrict on /3PN but in query designer slash is not taking the same values are displaying in infocube if any one faced the same issue
-
How to import footage from Sony F55 to Premiere CS6?
I'm going to shoot a project on HD with a Sony F55 (not in 2k or 4k). My DoP has given me some test footage, but I am unable to import the footage into Premiere. Can it import native or do I need to download any additional elements? Thanks, Jason
-
My G5 workstation is connected via ethernet to a G4 running panther. I use the G4 as a file/print server. Or at least I'd like to: The printers show up just fine on the G5, but if they are included in the printer list, Photoshop refuses to open any d