Hp support assistant is not working

I've reinstalled it ans still receiving the same message: The application has encountered with a serious problem and must close,  if a correction is found windows will contact me. This has been going on for over two weeks.

Dear Thomas558 -
Depending on what your version of Windows you are running, one of these documents should fix the issue with HP Support Assistant:
Troubleshooting HP Support Assistant (Windows 8)
Troubleshooting HP Support Assistant (Windows 7)
Sincerely,
dhtp
DH
I work on behalf of HP.
Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

Similar Messages

  • My HP Support Assistant is not working?

    My HP Support Assistant is not working?

    Hi,
    Try the following
    First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    When this has completed, restart the PC.
    Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    After the installation, restart the PC again.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Hp envoy m6 sound card, simmple pass applicatio​n and support assistant is not working properly

    i have hp envoy m61204tx.
    after upudate using hp support assistant sound card is not working properly also when i run hp simple pass or hp support assistant only start window appears then it hides nothing happend next.
    please guide me what is the problem and how to solve it.
    any help will me much appriciated.
    Thanks.

    @alki,
    I understand that sound has quit working after support assistant ran a few updates.  
    Press Windows Key + X and select device manager.  The sound card should be listed in the sound section.  What status is displayed for the sound card?
    What is the status of the mute key on the notebook?  Does it have an amber light?
    What happens if you try to install this driver?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hp support assistant is not working in windows 8 64bit

    Hi, 
    I have a brand new HP Pavillion Notebook , 14-v024. with window 8.1, 64 bit, AMD A8 processor.  I am not been able to open HP Support Assistant.Whenever i click on it a message pops up saying " This application has encountered serious problem click ok to restart" and then nothing happens. I tried to install and unistall HPSFA but the problem persist. It doesnt stop here i believe it some how is related to my wifi settings because alot of times my wifi disconnects and this message pops up. I even had Blue screen of death couple of times now considering it is a brand new laptop i am not happy with it at all. Can anyone PLease throw some light on this issue. 
    Thank you soo much. 

    Hi @Vikz05
    Welcome to the HP Forums! I see that you are having a couple of problems with your notebook. I will be happy to help with the Support Assistant and wireless issues. I am assuming that you tried reinstalling the HPSA from the website link, let's try doing it another way. Use the Recovery Manager to Restore the Original Drivers and Software, install both the HP Support Assistant in this manner and your wireless driver.
    You can also try using the built-in Windows Troubleshooter mentioned in this HP document Troubleshooting Wireless Network and Internet. I also included a number of generic wireless troubleshooting below:
    Power cycle the network:
    1. Shut down your notebook.
    2. Unplug the power to your router.
    3. Unplug the power to your modem.
    4. Wait at least 45 seconds.
    5. Plug in the modem, and wait for it to come back online.
    6. Plug in the router, and wait for it to come back online.
    7. Turn on your notebook, and test your connection.
    Reset the TCP/IP settings:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh int ip reset resetlog.txt" without quotes, and press enter.
    4. Restart your PC and test.
    Reset the winsock catalogue:
    1. Go to your start screen/menu and type CMD.
    2. Right click on the command prompt icon and chose Run as administrator.
    3. In the window that opens type "netsh winsock reset" without quotes, and press enter.
    4. Restart your PC and test.
    Change power management option for your wireless adapter:
    1. Open Device Manager.
    2. Expand the Network adapters.
    3. Right click on the Ethernet/Wireless Adapter and click Properties.
    4. Click the Power Management tab.
    5. Remove the check mark beside Allow the computer to turn off this device to save power.
    6. Click OK.
    7. Test.
    Forget the Network and reconnect (Windows 8):
    1. Press Windows Key + C
    2. Click Settings.
    3. Click Change PC settings.
    4. Click Network on the left.
    5. Click Manage known networks.
    6. Click the network name.
    7. Click Forget.
    8: Reconnect
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • HP Support Assistant function not working on my laptop

    I tried to use the HP support assistant software to make a call to HP support on a new laptop I purchases a week ago. The software never completes to give me access to  an HP tech. I have 3 issues unrelated to this that I need to deal with and will be posting them in the forums here but I would expect the support software to work as intended. If there's a simple number to call HP I would like that since their intended way of getting in touch doesn't work for now for me.
    Thanks!!!
    Donald

    I didn't include specifics on the laptop. Sorry about that. HEre they are:
    Product name: HP ENVY TS 17 Notebook PC
    Product number: E8A11UAR#ABA
    Windows 8.1 64-bit

  • HP Support Assistance have stopped working/desktop. and have not worked in weeks

    This computer have many problems, HP Support Assistance have stopped working, and Hp Quick Start have also stopped working-every time the support assistande update programs it stop working-and no matter what I do for quick start it never works. I have refreshed the computer many times only to loose my progrems and they are
    hard to get back- and when I recard them on a dvd they looks unreadable and will not download  on the computer my computer  is
    HP Pavilion p7-1446s Desktop the model Number is H3Z36AA#ABA The S/N is {Personal Information Removed}. windows 8.
    Microsoft said I could download windows 8.1 free but when I did they put the price up to 119 dollards what is it-
    is it free or do I pay.another problem is Rundll have problems starting. What can i do and can you help me??

    Hi anne_1, Sorry to hear that you are having issue with your Pavilion computer.  I have done some research for you and I have a link that will take you to download the updated Support Assistant.   http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=5297...
    If you would like to download and install the updated version of Windows 8.1 ,here is the link that will take you to the free download.      http://www8.hp.com/us/en/ad/windows-8/upgrade.html
    If this does NOT resolve the issues that you are having, please feel free to write back and I will be happy to offer more assistance.
    Thank you in advance
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Hp support assistant has stopped working windows 8

    My HP Support Assistant has stopped working. I have read other comments on the forum concerning this problem and attempted to follow their advice. But I am still having the same problem. I uninstalled the HP support in the Control Panel uninstall programs. I restarted  my computer then reinstalled the HP support. When installing it asked if I wanted to write over all of the files because HP files were still on my computer. Apparently it did not fully uninstall. I emptied my recycle bin and cleaned out my registry after I tried to uninstall the HP file again. Went back and reinstalled HP support again. This time I did not get the message that it was already installed and do I want to overwrite the files. I thought that the problem was solved but it is not. I cannot get the HP support to work at all. Please can anyone tell me what to do. I am not very savvy with computers and sure use some help.
    My computer is an:     HP Envy 20 TouchSmart 20d011 - using Windows 8.
    I had this problem with another HP computer and called Tech support and they told me to completely restore my computer and then my hard drive crashed. I had to send the computer back an purchased this one. But now dejavu all over. Thank you for any response to my question.

    Hi
    Here are few links given below might help you to fix your issue.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03601631
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02028499
    http://www8.hp.com/in/en/support-topics/windows8-support.html
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • HT204350 Migration Assistant is NOT working

    Migration Assistant is NOT working - Have tried from from a hard disk and using the Thunderbolt cable.  Keeps Looking for Source.
    Any ideas?  I really want to more on to my new Mac.

    That the Migration Assistant doesn't work is a KNOWN ISSUE.  Last week I got a new iMac and the old and new couldn't find one another.  I called tech support 3 times and spent I don't know how long on the phone.  They finally suggested I take them both to an Apple store, which I did today.  The Genius knew all about it - said it's a known issue.  To "resolve" it he started the old iMac in "disk mode" and then the new one could see it, but that wasn't an adequate fix: After spending over an hour moving the files, they wouldn't have been in their proper folders.  I would have had to manually file 6 years worth of pics and files!  NFW - I returned the new computer and will make do with my old one until Apple gets this right. 

  • HT1351 Now update v.ios7.1 my iphone 4s..after update with itunes look have something about assistive touch not work

    After to update ios7.1 have something it wrong.assistive touch not working some before

    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • HP Support Assistant does not inform about ANY updates for drivers/softwares

    Hello everyone, HP Support Assistant is not showing ANY sort of updates/messages for latest drivers and softwares although there are updated drivers available for my notebook at the Driver Software Support section from where you can manually download and install them. I'll be updating all my drivers one by one in the morning but ever since I've bought my laptop I've wondered why HPSA has not came to any benefit of mine yet. Is this a known problem? Help is highly respected!Regards.

    Okay so its starting to give updates,  so far I've had 3 updates for HP System Event Utility, Simeplepass and HP Wireless Button Driver.  I guess it works very specifically and on it's own.  No luck on other drivers.

  • Adobe download assistant will not work on my machine?

    Adobe download assistant will not work on my machine. When i try to start it i get a message saying "Sorry an error has occurred. This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance." Any ideas what to do

    Are you using Mac OS?  If so please try removing the Adobe Download Assistant from your Applications folder and try again.  This issue is documented in the Known Issues section of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html.

  • Microsoft.​net and HP support assistant don't work , can't find an answer here.

    HP support assistant has stopped working and Microsoft.net error reporting shim stopped working. Messages come up repeatly and every day. What to do about it. Non computer person haveing trouble.

    Lasttry,
    Thank you for that information.
    First I would like you to uninstall the current version of HP support assistant. This link will guide you to how to access the list of your programs, once there right click on the HP support assistant and then left click on uninstall.
    Once that it is finished restart the computer, and when the computer is back up go to this page to install the newest version of the HP support assistant, when you open the link click on home and business desktops. After that is done try testing the program out for an extended period of time.
    Please respond back at your earliest convenience.
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

  • HT5634 The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set uo

    The "automatic Install" in the windows support software does not work. I cannot see the USB in Windows to manually start set up.
    I have downloaded windows support software from Apple 3 time with the same result.  Where can I get a clean copy of the Windows support software?

    Did you correctly format your usb stick in accordance with the Boot Camp installation instructions? Go here to the Boot Camp System Requirements page, http://support.apple.com/kb/HT5634, look for your computer model/year and download the correct version of Windows Support software.

  • HP Support Assistant will not run

    I'm trying to update to Windows 10, but keep getting the error code 80070003 and I have tried everything that has been suggested to me in the Microsoft community. I have also noticed that the HP Support Assistant will not run. Please help! dfreehill

    Hello, and Welcome to the HP Support Community! Which HP device are you using? Are you using the "Update this device" or the "Media Creation" method? I updated 3 PC's today using the suggestions from here: http://www.theverge.com/2015/8/1/9083501/microsoft-windows-10-update-download-how-to-guide WyreNut

  • HP Printer Assistant is not working ...keeps loading...

    Hello, I have purchased a HP Officejet Pro 6830  All in One printer and have installed the software from the CD, installed updates and already used the HP Docter software but the Printer Assistant does not load. It keeps on with a blank screen, with the message that the Assistant is loading and Default Text message (see screenshot) it is just that, My system is Win 7 professional and compuer is Asus. The printer and scanner are working but the Printer Assistant software does not work.  My previous printer was also an all in one from HP and it had HP solution Center to manage the printer and scanning process but reading the forum I understand that is not a solution for this problem. 

    Hi,
    Although the issue seems different, try following this document and install the included patch, then check if you may able to load the HP Printer Assistant again:
    http://support.hp.com/us-en/document/c03640384
    Please let me know the results,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

Maybe you are looking for

  • Install Agent12c on Windows Server 2008 R2

    Hi All, I have to install Agent12c on on Windows Server 2008 R2, already there is Oracle 10g agent installed on the system. The OMS Server is a linux system. I am not able to find the setup of Agent12c for Windows Platform. Please help in this instal

  • Special characters in smartforms

    Hello all, I have a problem concerning smartforms and sepcial characters. I want to edit the unit of quantity M3 (little 3). When we print it the, 'M3' is correctly displayed. But when we archive it (so document saved as PDF), in the document a blank

  • Network Connection To Store Timed Out???  Advise Extremely Appreciated!

    Hi everyone, I am/was thinking about buying an iPod Touch for myself and I thought I'd go ahead and get iTunes. I see everyone is having this problem, but I am in need of personal advise. Here are the diagnostics: Microsoft Windows XP Professional Se

  • Apple pro res 4444 info?

    COuld someone tell me the data rate for apple pro res 4444 codec? how many megabytes per second does it demand? Will I be able to run it from a 7200 rpm firewire 800 single mobile drive? Thanks!

  • Use of an allocated ManagedConnection during recovery

              Hi All,           I am facing some concurrency issues. I have certain queries during recovery process           1) Can a ManagedConnection which has been already allocated be used during recovery           by the server?           2) In cas