HP Systems Insight Manager - login fails

Hi there,
on "HP Systems Insight Manager" i can't login, because my password contains
German special characters like (öüäß).
The version of HP SIM is 7.4.0 on windows Server 2008R2 or Windows Server 2012R2.
Is there a solution?
Thanks in advance Ralf
Hallo zusammen,
ich kann mich beim "HP Systems Insight Manager" nicht anmelden,
wenn mein Passwort deutsche umlaute enthält (öüäß).
Die HP-SIM Version ist 7.4.0 auf Windows Server 2008R2 bzw. Server 2012R2.
Gibt es dafür eine Lösung?
Danke vorab Ralf

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Similar Messages

Issue while installing HP System Insight Manager on Windows Server 2008

Hi everybody,
as I wrote in the subject, I'm having trouble while trying to update my HP SIM vers. 6.1 to HP vers. 7.1 on my server running Windows Server 2008 Enterprise SP1.
I encounter the errore message:
"HP System Insight Manager Installer detected an unsopported operating system..."
How can I fix this problem?
is it OS really unsopported or Do I have to perform some upgrade before?
is it because of my Microsoft SQL server version? I have the 2005 ver. Do I need the 2008 one?
in anycase HP SIM vers. 6.1 runs with no problem.
Thanks
D

It appears that you have a commercial LaserJet in an enterprise enviornment. It would be best to post in the commercial LaserJet forums.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

SAP mibs and Systems Insight Manager (SIM)

I'm trying to get our CCMS to send SNMP traps to our SIM (Systems Insight Manager) server. The SAP side of the setup is pretty straight forward. The SIM side, however, is not so clean.
Hopefully someone has had experience with this, and can either point me at some documentation / blogs that I've not yet been able to find, or just let me know where I've gone wrong.
The SIM server is 64bit Windows 2003, with SIM v 5 SP5.
The base mib pack is 7.70.
I've put the mibs provided by SAP on the SIM server in the mibs sub-folder.
I then ran "mcompile SAP_R3_MIB.txt" at a command prompt and it generated "SAP_R3_MIB.cfg".
Next I ran "mxmib SAP_R3_MIB.cfg" which said it completed successfully.
Yet, when I go into "Options -> Events -> SNMP Trap Settings.." the SAP_R3_MIB is not listed.
I have brought other non-SAP mibs in this way in the past. Is there something special I'm missing?
Any help would be greatly appreciated.

Hi,
I am trying to send SNMP alert from Solution Manager to Tivoli TEC. On solution Manager side log files shows that trapsend was triggered and there was no error. However I do not have any visibility on TEC side which is managed by other team. All i do is when I perform test , i asked them to check if they received anything and they say NO.
I had given them MIBS provided by SAP to TEC team. I don't know what they have done with that but looking at your blog I can tell that you are experienced on the receiving side.
Can you help me to understand the steps they should be performing with MIBS which I gave them. Do they need to change.txt file to .mib as you did. Also what is the way to check if they are receving anything or not? any tool or command at OS level also ?
If you have any document which you created based on your experience, it will be great. you can send it to me at [email protected]

Hp system insight manager-device discover issue

Hi,
I have recently installed hp System Insight Manager 7.4. But I can't discover any hp device. The system did not respond to SNMP. when discover any hp device then System Insight Manager showing error:
Major: The system cannot be identified properly for HP SIM to manage;
              unable to get one or more of the following: model, serial number or
              unique identifier (UUID). For management processors, verify the
              system is running the latest firmware. For Linux based operating
              systems, you must have dmidecode installed, enable the
              PermitRootLogin and PasswordAuthentication in sshd, and use root
              sign-in credential. For HP-UX, verify the sign-in credential. For
              Windows, check if WMIMapper is configured correctly on the CMS and
              verify the sign-in credential.
Any ideas on a fix for this?
Thank you,
Nahid

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

HP Systems Insight Manager - Database questions, what is this database for?

Hello,
I am either missing this information completely in the Installation guide or it doesn't exist, but I am looking for details of the database that HP SIM needs to install.
-I assume this database will be used as a CMS?
-What information will this database be storing?
-If I have multiple HP servers, is it best to put this database on a remote dedicated database server? Will each HP machine that has SIM installed be pointing to this database?
Thanks.

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Vcenter 5.1 use HP SIM (HP Systems Insight Manager)

Hi All Memember
Now i use HP SIM monitoring wanranty of server only but i need use HP SIM check and monitoring hardware of server (vsphere 5.1) .
Phase 1.
I need to monitoring HP Server in HQ , How to intergate HP SIM to vmware esxi ?
Can check hardware and send email to IT ADMIN
Version: Systems Insight Manager 7.0.0 - Windows      Build version:C.07.00.00.00
My VMware Exi
HQ
1 . HP server vSphere 4.1
    have vm 21 guest
Datacenter
                                          Vcenter server
1 HP server vSphere 5.1   2. HP server vSphere 5.1 3. HP Server vSphere 5.1

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager - Disk Alerts Not being received

Hello,
I'm not receiving any disk alerts in HP SIM 7.4.0
If I open HP SIM and click on the server that has a disk issue it shows that there is an issue with the disk and has an yellow triangle next to Smart Array controller which is good.
However i am not getting an email alert for it. If I go to Events - Automatic Event Handling - Manage Tasks I have All Events selected as I have only added one server so far so should get alets for everything.
I only get an alert when restarting the server. I should get an email to let me know that there is a problem with the array on the member server?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager SNMP Traps not being received

I found the following on HP help....is it any use?Why am I not receiving notification when there is a SNMP Authentication trap received? Solution: The default setting for Enabling Trap Handling in SNMP Extensions is Disabled (Not Processed). The reason for this is because typically, a system can be set up with an incorrect community string or an incorrect community string is set in HP Systems Insight Manager, which results in an Authentication Failure trap to be sent to the management server each time a request is made to the system. This results in many traps being logged. To change this setting to Processed (Enabled), complete the following steps:Open HP Systems Insight Manager (http://machinename:280).Log in as a user with full configuration rights.Select OptionsEventsSNMP Trap Settings. In the Mib Name field, select rfc1215.mib.In...

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

HP Systems Insight Manager

I'm having an issue getting HP System Insight Manger to show/display detail for most of the 30+ proliant servers on the network. See screen capture. What am I missing or need to do?
This topic first appeared in the Spiceworks Community

Hello,
New to this site so here we go with an issue on HP Systems Insight Manager v7.4.0
System Insight Manager (SIM Server) receives alerts from a second server when the server restarts but no other alerts although it should be receiving all alerts.
When looking at the management agent on the second server I try and send a test trap and although it is sent it is not received on the SIM Server.
I do get alerts on the SIM server (and receive an email which has been set to send for all alerts) when the second server is restarted.
As I have set all alerts to be logged I should be getting spammed by the second server but it's all very quiet.
Any ideas anyone as I am stumped?
This topic first appeared in the Spiceworks Community

Windows System Image Manager (WSIM) fails to catalog

WSIM (version 6.3.9600.16384) from Windows 8.1 AIK does not work with Windows 10 Preview Enterprise. It fails to generate a catalog file for the Windows 10 .wim image.
Error message shown below
Log file
1:39 PM : This application requires version 6.3.9600.16384 of the Windows ADK.
Install this version to correct the problem
1:44 PM :
1:44 PM : Windows SIM was unable to generate a catalog. For troubleshooting assistance, see the topic: 'Windows System Image Manager Technical Reference' in the Windows ADK User's Guide.
1:44 PM :
1:44 PM : System.ComponentModel.Win32Exception (0x80004005): Unknown error (0xc1420117)
Server stack trace:
   at Microsoft.ComponentStudio.ComponentPlatformInterface.WimImageInfo.PostCreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.OfflineImageInfo.CreateCatalog()
   at Microsoft.ComponentStudio.ComponentPlatformInterface.CatalogCreatorImpl.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Object[]& outArgs)
   at System.Runtime.Remoting.Messaging.StackBuilderSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.ComponentStudio.ComponentPlatformInterface.ICatalogCreator.CreateCatalog(OfflineImageInfo offlineImageInfo)
   at Microsoft.ComponentStudio.CatalogGenerator.CreateCat(ProgressDialog pd, Object o)
WSIM Version
Surprising that it fails on the cleaning up portion, after mounting, serializing and un-mounting the Image.
Is there an updated version of AIK or WSIM that needs to be used?

It uses a new image format. The DISM and imaging api from even version 6.3.x (win 8.1) won't be able to access it.
But I think it's got some issues. I can do a get-windowsimage -ImagePath install.wim and see the images, but dism /image:install.wim /? says "Unable to access the image. Same with the boot wim.
Here's what dism.log says that is relevant:
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Loading Provider from location C:\Windows\System32\Dism\FfuProvider.dll
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Connecting to the provider located at C:\Windows\System32\Dism\FfuProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2014-10-09 13:25:29, Error                 DISM   FolderManager: PID=1724 base\ntsetup\opktools\dism\providers\folderprovider\dll\folderimage.h:190 - CFolderImage::CreateFolderImage(hr:0x80070032)
2014-10-09 13:25:29, Info                  DISM   DISM WIM Provider: PID=1724 TID=3028 [c:\temp\boot.wim] does not exist and is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM VHD Provider: PID=1724 TID=3028 [c:\temp\boot.wim] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Getting Provider VHDManager - CDISMProviderStore::GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM VHD Provider: PID=1724 TID=3028 [c:\temp\boot.wim] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 The provider VHDManager does not support CreateDismImage on c:\temp\boot.wim
- CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Getting Provider WimManager - CDISMProviderStore::GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM Provider Store: PID=1724 TID=3028 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2014-10-09 13:25:29, Info                  DISM   DISM WIM Provider: PID=1724 TID=3028 [c:\temp\boot.wim] does not exist and is not a WIM mount point. - CWimMountedImageInfo::Initialize
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 The provider WimManager does not support CreateDismImage on c:\temp\boot.wim
- CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Info                  DISM   DISM Imaging Provider: PID=1724 TID=3028 No imaging provider supported CreateDismImage for this path - CGenericImagingManager::CreateDismImage
2014-10-09 13:25:29, Error                 DISM   DISM.EXE: Failed to access the image folder or image's windows folder.
2014-10-09 13:25:29, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.

NSM 3.0.1 Qouta Manager Login Failed

We recently upgraded from NSM 2.5.2 to NSM 3.0.1. After the upgrade the web interface for Quota Manager gives a "Login Failed" error message. I had found a post where someone had a similar experience after that upgrade and he said that he had exported the storage policies, rebuilt the server and did a fresh install of NSM 3.0.1 to resolve the issue. That did not work for me.
So right now we have NSM 3.0.1 running on a Windows 2008 R2 SP1. Im not seeing anything in the error logs right now. I also do not see it attempt to authenticate to the Domain Controllers either for the user that is in the Quota Managers group for a policy.

Please send an email to storagemanager-at-novell.com so we can help you
sort this out.
thanks,
NSM Development
On 6/3/2011 10:36 AM, hbutler2 wrote:
>
> We recently upgraded from NSM 2.5.2 to NSM 3.0.1. After the upgrade the
> web interface for Quota Manager gives a "Login Failed" error message. I
> had found a post where someone had a similar experience after that
> upgrade and he said that he had exported the storage policies, rebuilt
> the server and did a fresh install of NSM 3.0.1 to resolve the issue.
> That did not work for me.
>
> So right now we have NSM 3.0.1 running on a Windows 2008 R2 SP1. Im
> not seeing anything in the error logs right now. I also do not see it
> attempt to authenticate to the Domain Controllers either for the user
> that is in the Quota Managers group for a policy.
>
>

Oracle Web Service Manager Login failed

Hi ,
I had installed advance version of SOA 10.1.3.1 on windows xp. I abel to login to all component other than web service manager.I am using the oc4jadmin user id and its password to login.Please let me know what i have to do to fix it.
Regards,
Pankaj

Hi syed,
I completely agree to you. But I observed that after advanced installation of SOA suite, only OWSM uid & pwd defers from the default oc4jadmin uid & pwd like for other components.
We can configure that at later point of time. But by default, oc4jadmin credential will not work.
Cheers,
Abhi...

MDS 9509,9222i & 9234 configuration with HP System Insight Manager

I have enabled the Https(Cimserver) using a dummy ssl certificate. Still my central management server (HP SIM) doesn't recognizes the switch to be a Storage Switch.
when i run the identification query, it stops at " CIM_RegisteredProfile"

I know there might be issues with cimserver and different versions of SMI-S solutions. SAN-OS 3.2 uses 1.1 and 3.3 and above uses 1.2. The changes are considerable and can make some SMI-S system not work well. I don't know if NX-OS is supported yet.
I don't use HP SIM so I really can't say for sure but its worth checking on what is supported.

Connection Manager: login failed

I'm trying to use the destination assistant in an SSIS project in Visual Studio v2010 to configure a database to hold fields from a flat file source. I select the Native OLE DB/SQL Server Native Client 11.0 as a provider. No connections show
up in the connection manager.
I select 'MSSQL2008_R2', but there are no databases listed there even though I have several databases showing up in SSMS. I've double checked the database name and connections; I've got windows authentication set as the authentication method. I
am listed in these databases as dbo and I'm an SA user.
Is there another step I need to enable the OLE DB connection from SSMS?

I ended up getting the databases to show up by entering a '.' in the server name field on the connection manager rather than selecting from the choices listed in the drop-down.
That worked! Thanks!
That will work only if its a local instance. You cant use the same to connect to db from another machine in same domain
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

XI Installation: SAP System Account+Password- Login failed

Hi All,
This is my first attempt in installing XI.
I have installed SAP Web AS 6.40 ABAP+Java System and am trying to install XI now.
I can also confirm that my J2EE engine is up and running. I ran the J2EE example on HTTP using port 50000.
Here is my basic config:
VMWare with Windows 2003 Server SE, 60Gigs dedicated HDD space, 2Gig RAM, MS SQL Server 2k Enterprise SP4.
My Problem is that when I run the "XI Installation" from "NetWeaver Components Running on Java" I get asked for my SAP System Account's (user: l01adm) password. I know what my password for System account is, but for some reason I get "Invalid Password" error message from SAPInst GUI program.
Since I am very new to SAP Web AS and XI, there could be quite a few reasons why this is not working.
Could anyone please shed some light my direction regarding the possible things that could be causing my problem?
Regards,
-Alen Ribic

C if any of these threads can help you out -
XI Installation: invalid XI SAP <sid>adm password
Re: invalid password during xi-installation
Also ref note : 721548

HP Systems Insight Manager - login fails

Similar Messages

Maybe you are looking for