HP Teaming Query

Hi
I currently have a quad port NIC with two of those ports in a team for Hyper-V traffic. I wanted to add two free onboard NIC's to that team, just open HP NCU, select the current team, select the free NICs, then just click Team? Those new NIC's don't need a static IP either correct? Just DHCP, then add them?
I run HP NCU 10.80
Cheers

Hello, and Welcome to the HP Support Community!
Have you tried copying and pasting the URL of the transaction page into the ePrint app?
How about taking a screencapture of the transaction and printing it as a picture?
Final suggestion would be considering a paid print app like PrintHand. At $13, it is a bit pricey but it will print anything to any printer via wifi, Bluetooth, etc. I use it on my Samsung SIII. It's available in the Play Store.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Query Output in specific way

Team,
Query - select d.Hostname, od.data from zDevice d join zOpaqueData od on d.ZUID = od.object WHERE (od.name = 'com.novell.zenworks.data.configSettingForContentReplication') order by Hostname
Output - <ContentSatelliteServer><ServersToUse>Parent</ServersToUse></ContentSatelliteServer>
Above is just the sample, I just want to retrieve the Parent
part, could someone help me?
Thank you.

Assuming your output is varchar type, and you need the text from
<ServersToUse> and </ServersToUse>
Please try as follows
Declare @outputstring varchar(100)='<ContentSatelliteServer><ServersToUse>Parent</ServersToUse></ContentSatelliteServer>'
select SUBSTRING(@outputstring,CHARINDEX('ServersToUse',@outputstring)+LEN('ServersToUse')+1,CHARINDEX('</ServersToUse>',@outputstring)-(CHARINDEX('ServersToUse',@outputstring)+LEN('ServersToUse')+1))
Thanks
Manish
Please click Mark as Answer if my post solved your problem and click
Vote as Helpful if this post was useful.

TFS 2012 - WebAccess - how to define which Query will run by default when navigating to WORK- WorkItems page

When we nagivate in IE in TFS Web Access, to the WORK -> Work Items page, TFS runs the AssignedToMe query and focuses on it as sort of default query that runs in such event. We have some teams under the team project, but AssignedToMe is not sensitive
to Team, only to Team Project, hence when navigating to the page of the specific team, this query shows the same per all teams :(.
In order to bypass this, we'd like to set a specific team query to be the default one to run when navigating to the team's page, instead of AssignedToMe, and thus have the result specific to each team scope.
Alternatively if it is possible to somehow filter AssignedToMe query according to Team Scope it would be great. Alas there's no @Team field yet, and we don't wish to create multiple AssignedToMe queries and name each specific to each team, nor do we wish
to put team queries in MyFavorites while naming them specifically per team..
Kindly advise, thank you

Hi Moital,
Thanks for your post.
As far as I know there’s no default way to the default query(AssignedToMe) in Work Items page, we usually add uses in different teams. If the user want to view the work items in one specific team, he can create a my query to filter work items according team
field value.
Yes, as you said there’s no @Team value in Team field to filter current team’s work items in work item query, so if you want create the shared query according team values, you need create this shared query for each team.
For the Team field, please refer to the information in this document:
https://msdn.microsoft.com/en-us/library/dn144940(v=vs.110).aspx.
For this scenario, you can submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them
seriously.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My Skype Account been Hacked, and I can't seem to ...

Hello,
Hopefully someone can help me here. My SKYPE Log in has been hacked by someone. I can still access my account with my Microsoft (hotmail) log on. I can only assume that they have used my old Skype log on to get in and change details.
My concern is that I am finding the lack of contact from Skype/Microsoft very frustrating. I have filled in the Customer Support Team query, then got an email back asking for me to complete again. Since then, I have recieved nothing, not even a confirmation that they have received my return and are looking into it.
Is this normal? Surely you would expect some acknowledgment of reciept?
Can someone please help.
Thank you
Peter

If your email is deleted, that doesn't necessarily mean your Apple ID is. Try resetting your Apple ID password at iforgot.apple.com and then all you've got to do is go to Settings > iCloud > Delete Account. From there you can enter the password you changed it to and remove your iCloud account from your device.

SUN TEAM: Bugs in update and delete a record with long query

Creator Team,
In my opinio there is a bug issue with update and delete a record with a complex sql query. I�m using oracleXE and ojdbc14.ar with tomcat
In just two page I�m receving the following msg (I have 12 pages doing the same thing with less complex queries)
* Number of conflicts while synchronizing: 1 SyncResolver.DELETE_ROW_CONFLICT row 2 won't delete as values in database have changed: 2006-11-29
* Cannot commit changes: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 0 values changed in database
when i tried to delete or commit the updated changes in the register...
The interesting is that this code function with jdbc of jsc...
My query is bellow:
SELECT ALL PATRIMONIO.TB_BEM.INCODIGOBEM,
PATRIMONIO.TB_BEM.VATOMBAMENTO,
PATRIMONIO.TB_BEM.VAMATERIAL,
PATRIMONIO.TB_BEM.INCODIGOSETOR,
PATRIMONIO.TB_SETOR.VANOME AS NOMESETOR,
PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR,
PATRIMONIO.TB_FORNECEDOR.VANOME AS NOMEFORNECEDOR,
PATRIMONIO.TB_BEM.DACHEGADA ,
PATRIMONIO.TB_BEM.DASAIDAPREVISTA,
PATRIMONIO.TB_BEM.DASAIDAEFETIVA,
PATRIMONIO.TB_BEM.VAMARCA,
PATRIMONIO.TB_BEM.VAMODELO,
PATRIMONIO.TB_BEM.VADESBAIXABEM,
PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO,
PATRIMONIO.TB_TIPOAQUISICAO.VANOME AS NOMETIPOAQUISICAO
FROM PATRIMONIO.TB_BEM , PATRIMONIO.TB_TIPOAQUISICAO, PATRIMONIO.TB_SETOR, PATRIMONIO.TB_FORNECEDOR
WHERE PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO = PATRIMONIO.TB_TIPOAQUISICAO.INCODIGOTIPOAQUISICAO
AND PATRIMONIO.TB_BEM.INCODIGOSETOR = PATRIMONIO.TB_SETOR.INCODIGOSETOR
AND PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR = PATRIMONIO.TB_FORNECEDOR.INCODIGOFORNECEDOR
AND PATRIMONIO.TB_BEM.INCODIGOBEM LIKE ?
AND PATRIMONIO.TB_BEM.VATOMBAMENTO LIKE ?
AND PATRIMONIO.TB_BEM.VAMATERIAL LIKE ?
AND PATRIMONIO.TB_SETOR.VANOME LIKE ?
AND PATRIMONIO.TB_FORNECEDOR.VANOME LIKE ?
ORDER BY PATRIMONIO.TB_BEM.VATOMBAMENTO ASC
Why this problem is happing? Did you had some solution for that? Is the problem because the query is too long?!
please help me!
Gustavo Callou

Hello people,
I�m doing this to try to solution that bug:
This code is working fine... but I do not understand why I�m receiving the nullpointer exception!??!!?
// create a new rowset
CachedRowSetXImpl pkRowSet = new CachedRowSetXImpl();
try {
RowKey rk = tableRowGroup1.getRowKey();
if (rk != null) {
// set the rowset to use the Patrimonio database
pkRowSet.setDataSourceName("java:comp/env/jdbc/Patrimonio");
String query = "DELETE FROM TB_BEM WHERE INCODIGOBEM = "+tb_bemDataProvider.getValue("INCODIGOBEM", rk).toString();
pkRowSet.setCommand(query);
pkRowSet.setTableName("TB_BEM");
// execute the rowset -- which will contain a single row and single column
pkRowSet.execute();
pkRowSet.next();
info("Apagado");
} catch (Exception ex) {
log("ErrorDescription", ex);
error(getApplicationBean1().trateException(ex.getMessage()));
} finally {
pkRowSet.close();
Please someone help me!!!
Gustavo Callou

Employee business partner ID showing up in "Service Team" column of query

Hey everyone,
We have a strange problem appearing in our Solution Manager. In workcenter, when we build a query that shows the "Service Team" column we find that while the "Support Team" shows up for most of the results (which is correct) a few of the results displays employee business partner IDs instead (despite the message having Support Teams assigned to them).
Through investigation we've found out that all of these business partners are assigned to roles in the message (reported by, message processor, functional analyst etc etc.) Interesting to note that the business partner ID showing up in the "Service Team" column is always the LAST business partner record on the "Business Partner" tab of the message.
So if the business partner tab looks like this:
Partner Function       Partners
Reported by              A1
Support Team           B1
Message Processor C1
Functional Analyst    D1
D1 would show up in the Service Team column despite there being a Support Team assigned. If a new partner is assigned and a new record appears below the Functional Analyst D1 record, that new partner's ID appears in the "Service Team" column instead.
Does anyone have an idea of why this could be happening to these few recordcs and how to ensure the "Support Team" is the value showing up in the "Service Team" column?
Thanks,
Laurence

Hi,
You can go to the infoobject setting RSD1 and check the help f4 attributes and select only those which you want. this afect for infoobject 0COSTCENTER not for any specific query.
regards
Gopal

TFS 2010: Query over all Collections and Team Projects

Hi,
is it possible to generate a query which queries all collections and team project on a TFS?
For example if I want to know all work items assigned to me. Actually I can only query over a collection and not over the complete TFS.
How can I do this?
Thanks,
Mat

Hi Mat,
Thank you for your post.
You may need write a TFS API to list all team project collections in server. For detail information, you can refer to Taylaf's blog
Retrieve the List of Team Project Collections from TFS 2010 Client APIs and Paul's blog
List all TFS Project Collections and Projects.
I hope this information will help resolve this issue.
If anything is unclear, please free feel to let me know.
Regards,
Lily Wu
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SQL Query to gather Team Discussion Notes

Can someone assist with some help in writing or even finding the correct data from Project Server. This is in regards to the Team Discussion notes for each project. I would like a query that I can run that gathers the author, date, and the note(s)
from all projects instead of having to enter the team discussion and then each note individually for each project. I am not able to pull the correct fields together or even find them. Thanks for any assistance.

Hello,
From the description I assume you are talking about the "Team Discussion" list on the Project Site (Project Server 2010). If so this data is stored in the SharePoint content data and is not supported to query directly with T-SQL. To get this data programmatically you
need to use the SharePoint object model. See an examples here in SSRS:
http://www.mssqltips.com/sqlservertip/2068/using-a-sharepoint-list-as-a-data-source-in-sql-server-reporting-services-2008-r2/
http://nikpatel.net/2010/06/11/step-by-step-consuming-sharepoint-2010-lists-data-in-the-ssrs-2008-r2-reports/
http://nearbaseline.com.au/blog/2011/03/update-reporting-from-sharepoint-lists-with-sql2008r2/
If you want to use SQL to get the data you will need a 3rd party add on such as the examples below:
CPS ReportLink:
http://www.cps.co.uk/What-We-Do/Pages/SharePoint-ReportLink.aspx
A tool that is event driven and copies data to custom database tables to allow use of T-SQL in reports for SharePoint data - very easy to use.*
IPMO data miner http://www.ipmo.com.au/productivity-tools/
Paul
*disclaimer - I work for CPS.
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

Query help : Query to get values SYSDATE-1 18:00 hrs to SYSDATE 08:00 hrs

Hi Team
I want the SQl query to get the data for the following comparison : -
Order Created is a Date Column , and i want to find out all the values from (SYSDATE-1) 18:00 hours to SYSDATE 08:00 hours
i.e.
(SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 08:00:00.
Regards

Hi, Rohit,
942281 wrote:
If i want the data in the below way i.e.
from (SYSDATE-1) 18:00 hours to SYSDATE 17:59 hours ---> (SYSDATE-1) 18:00:00 < Order.Created < SYSDATE 07:59:00.If you want to include rows from exactly 18:00:00 yesterday (but no earlier), and exclude rows from exatly 08:00:00 today (or later), then use:
WHERE   ord_dtl.submit_dt >= TRUNC (SYSDATE) - (6 / 24)
AND     ord_dtl.submit_dt < TRUNC (SYSDATE) + (8 / 24)
So can i use the below format : -
ord_dtl.submit_dt BETWEEN trunc(sysdate)-(6/24) and trunc(sysdate)+(7.59/24) . Please suggest . .59 hours is .59 * 60 * 60 = 2124 seconds (or .59 * 60 = 35.4 minutes), so the last time included in the range above is 07:35:24, not 07:59:59.
If you really, really want to use BETWEEN (which includes both end points), then you could do it with date arithmentic:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - (6 / 24)
                  AND         TRUNC (SYSDATE) + (8 / 24)
                                           - (1 / (24 * 60 * 60))but it would be simpler and less error prone to use INTERVALs, as Karthick suggested earlier:
WHERE   ord_dtl.submit_dt BETWEEN TRUNC (SYSDATE) - INTERVAL '6' HOUR
                  AND         TRUNC (SYSDATE) + INTERVAL '8' HOUR
                                           - INTERVAL '1' SECONDEdited by: Frank Kulash on Apr 17, 2013 9:36 AM
Edited by: Frank Kulash on Apr 17, 2013 11:56 AM
Changed "- (8 /24)" to "+ (8 /24)" in first code fragment (after Blushadown, below)

How to write a condition in BEX Query Designer

Hi
How can i write a condition in Query Designer
Scenario
An employee can purchase any no of policies in a day or month.each policy will have start date and expiry date.
My requirment
Count all the policies(valid) by employee on a ranges basis exception reporting
(0-10;10-20;20-30;30-40) and then able to drill down by policy start date and expiry date.
As per the requirment is to show policies which are not yet expired (active) i need to write a condition that will count only policies whose Expiry date is > Current calender day
As Policy Expiry Date is a char i am converting it to KF using fourmala variable so that i can write a condition on it using current cal day formula variable sap exit
But i char assigment of a condition i find 4 option
How can i achieve this
Thanks

Hi Aurun,
Thanks for the help,Really appreciated
As this is my first enhancement using ABAP & CMOD
What type of key (either Access or developer ) do i require to perform the following enhancement......so that i can raise request with basis team
I shall be great ful if u can asnwer below question
First, you need to create a variable for expiry date with processing type as customer exit, and then give the necessary info.
In details tab, unchk ready for input as we wont be taking the value from the prompt.
Now go to CMOD transaction.
Open the correcsponding project which has the exit code
(How can i identify the project which has exit code)
and go to ZXRSRU001 module inside taht.
Go to the module where u write the exit.
(How to locate the required module)
Then, under i step 1, write the code:
IF I_STEP = 1.
CASE V_NAME (What is 'V_NAME',Is it my variable technical name)
WHEN 'X' " X is the variable u created for the exit
l_s_range-low = SY-DATUM.
l_s_range-opt = 'I'.
l_s_range-sign = 'GT'.
APPEND l_s_range TO e_t_range.
END CASE.

CAN WE HAVE IF CONDITION IN QUERY GENERATOR

Hi friends,
am, trying to make use of if condition to obtain a set of values in query generator. Its possible to retrieve the required result set using query analyser but not in query generator. am trying to execute the following query
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 1 and owor.itemcode = '100-100')
begin
                select itt1.u_reactor1 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
else
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 2 and owor.itemcode = '100-100')
begin
     select itt1.u_reac_23 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
else
if exists (select owor.u_reactor from owor,oitt where oitt.code=owor.itemcode and owor.u_reactor = 3 and owor.itemcode = '100-100')
begin
     select itt1.u_reactor4 from oitt,itt1 where itt1.father = oitt.code and itt1.father = '100-100'
end
if it is not possible to write such query in query generator can someone help me with a workaround solution.
Thank u
Vaitheeswaran

Hi,
I dont think Nested IF Statements are allowed in PLD. The reason that u get the result in Query analyser and not in Query Generator is that SAP supports Transact SQL and many SQL Server 2000 functions are not supported.
However there is a work around in Print Layout Designer for using IF condition by having Linked Objects. Kindly see some tutorials regarding Linked fields available on SDN site and think of some other way of implementing this nested IF query.
Regards
Rizwan Hafeez
Team Lead
SAP Addon Development Section
Abacus Consulting - Pakistan

Date range query problem in report

Hi all,
I have created a report based on query and i want to put date range selection but query giving problem.
If i am creating select list selection then it is working fine means it will display all records on the particular date.
But what i need is that user will enter date range as creation_date1,creation_date2 and query should return all the records between these date range. i want to pass it by creating items, i created two items and passing creation_date range to display all records but not displaying and if not passing date then should take null as default and display all records
Here is the query:
/* Formatted on 2006/12/10 20:01 (Formatter Plus v4.8.0) */
SELECT tsh."SR_HEADER_ID", tsh."SALES_DEPT_NUMBER", tsh."COUNTRY",
tsh."LOCAL_REPORT_NUMBER", tsh."ISSUE_DATE", tsh."SUBJECT",
tsh."MACHINE_SERIAL_NUMBER", tsh."MACHINE_TYPE", tsh."MACHINE_HOURS",
tsh."STATUS"
FROM "TRX_SR_HEADERS" tsh, "TRX_SR_PARTS" tsp
WHERE (tsh.status LIKE :p23_status_sp OR tsh.status IS NULL)
AND (tsh.machine_type LIKE :p23_machine_type_sp)
AND ( tsh.machine_serial_number LIKE
TO_CHAR (:p23_machine_serial_number_sp)
OR tsh.machine_serial_number IS NULL
AND ( TO_CHAR (tsh.failure_date, 'DD-MON-YY') LIKE
TO_CHAR (:p23_failure_date_sp)
OR TO_CHAR (tsh.failure_date, 'DD-MON-YY') IS NULL
AND ( TO_CHAR (tsh.creation_date, 'DD-MON-YY')
BETWEEN TO_CHAR (:p23_creation_date_sp)
AND TO_CHAR (:p23_creation_date_sp1)
OR TO_CHAR (tsh.creation_date, 'DD-MON-YY') IS NULL
AND (tsh.issue_date LIKE :p23_date_of_issue_sp OR tsh.issue_date IS NULL)
AND (tsh.country LIKE :p23_country_sp OR tsh.country IS NULL)
AND ( tsh.local_report_number LIKE TO_CHAR (:p23_local_rep_num_sp)
OR tsh.local_report_number IS NULL
AND ( tsp.part_number LIKE TO_CHAR (:p23_part_number_sp)
OR tsp.part_number IS NULL
AND tsh.machine_type IN (
SELECT DISTINCT machine_type
FROM trx_sales_dept_machine_list
WHERE sales_department_id IN (
SELECT DISTINCT sales_department_id
FROM trx_user_sales_department
WHERE UPPER (user_name) =
UPPER ('&APP_USER.'))
AND SYSDATE >= valid_from)
AND tsh.sr_header_id = tsp.sr_header_id
can any one tell me wat is wroung in this query.
Any other way to write this?
Thank You,
Amit

Hi User....
Here is some date range SQL that my teams uses with some success:
For date columns that do not contain NULL values, try this (note the TRUNC, it might help with your "today" problem).
The hard coded dates allow users to leave the FROM and TO dates blank and still get sensible results (ie a blank TO date field asks for all dates in the future.
AND TRUNC(DATE_IN_DATABASE)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),:
:P1_DATE_TO)
For date columns that contain NULL values, try this (a little bit trickier):
AND nvl(TRUNC(DATE_IN_DATABASE),
decode( :P1_DATE_FROM,
decode( :P1_DATE_TO,
TO_DATE('30-DEC-3000'),
NULL),
NULL)
BETWEEN
decode( :P1_DATE_FROM,
TO_DATE('01-JAN-1900'),
:P1_DATE_FROM)
AND
decode( :P1_DATE_TO,
TO_DATE('31-DEC-3000'),
:P1_DATE_TO)
Note the 30-DEC-3000 versus 31-DEC-3000. This trick returns the NULL dates when the FROM and TO date range items are both blank.
I hope this helps.
By the way, does anyone have a better way of doing this? The requirement is given a date column in a database and a FROM and a TO date item on a page,
find all of the dates in the database between the FROM and TO dates. If the FROM date is blank, assume the user want all dates in the past (excluding NULL dates). If the TO date is blank, assume that the user wants all of the dates in the future (excluding NULL dates). If both FROM and TO dates are blank, return all of the dates in the databse (including NULL dates).
Cheers,
Patrick

Report- Pl/sql function returning sql query parsing page items as text?

Hi Team,
I am facing a strange issue .
I have four page items namely
1)JOB_CODE
2)MIN_EXP
3) MAX_EXP
4) SOURCES1
I have a report of the type "Pl/sql function returning sql query"
declare
v_sql varchar2(4000);
begin
if (:JOB_CODE IS NOT NULL and :MIN_EXP IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql:= 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:JOB_CODE IS NULL and :MIN_EXP IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:MIN_EXP IS NULL and :JOB_CODE IS NOT NULL and :MAX_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where v_experience_years <= :MAX_EXP and V_REQUIREMENT = :JOB_CODE and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
elsif (:MAX_EXP is null and :JOB_CODE IS NOT NULL and :MIN_EXP IS NOT NULL and :SOURCES1 IS NOT NULL) then
v_sql := 'select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and source like ' || '''' || '%'|| ':SOURCES1' || '%' || '''';
end if;
insert into query_list values (v_sql);
insert into debug values (:JOB_CODE , :MIN_EXP , :MAX_EXP , :SOURCES1);
return v_sql;
end;
Please not that I am insertin the query into a table called Query_list and the page item values into the table called Debug thru the pl/sql function which returns teh query.
Now I select the data from the debug tables.
select unique(query) from query_list;
select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = :JOB_CODE and v_experience_years >= :MIN_EXP and v_experience_years <= :MAX_EXP and source like '%:SOURCES1%'
select * from debug;
JOBCODE     MINEX     MAXEX     SOURCE
21     1     10     donkeyHire
And if I run the query in sql I get some records returned
select v_candidate_id, v_fname,v_current_employer,v_Experience_years from candidature where V_REQUIREMENT = 21 and v_experience_years >= 1 and v_experience_years <= and source like 'donkeyHire'
V_CANDIDATE_ID     V_FNAME     V_CURRENT_EMPLOYER     V_EXPERIENCE_YEARS
2     Vengu     Andale Tech     4
But the record does not show up in the report!
does this type of report parse page items as text?
Why is it so?
Waiting for an early reply.
Thanks,
venkat

Venkat - You don't want to put ':SOURCES1' in quotes like that.
Scott

Why I dont see Pinned Items in Team home page ?

Hello,
I am team administrator, however I dont see pinned items on team home page.
Also, I don't get "Pin to homepage" option on right click of query as well as on chart !!! Why so ?
Would you please tell me the reason and how can I resolve it ?
Thank you in advance !
Dipti Chhatrapati

Hi!
You may pin a query that in the Team Favorites
https://msdn.microsoft.com/en-us/library/jj920199.aspx:

TF400893: Team Foundation Server services are not available.

Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
Regards

Hi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

HP Teaming Query

Similar Messages

Maybe you are looking for