Hp touch pad not turning on
I've had my touch pad for 24 hours and it won't turn on. Any help?
possible battery is dead need recharge
go to google and type touchpad does not turn on.
Similar Messages
-
Touch pad not working with HP G60 operating on Windows 7
I have a HP G60 operating on Windows 7 (not sure bit) and have problems with touch pad not working.
I was using touch pad and wireless mouse interchangeably for past year.
No recent changes made to system. Suddenly not work one evening. Have tried shutting down and left overnight which has not resolve problems. On one occasion, i was not even able to type and that resolved after re-starting computer.
There is a button between space bar and top of touch pad which is white. Even when i press and turn red, it has not changed situation. Therefore I have to use my wireless mouse to operate for the moment.
Would appreciate any advice about what is the problem and ways to resolve it.
Thanks a lot!
MoHi,
The numbers are fine
Try the following.
First, ensure the Touchpad is switched on ( the light between the Touchpad and the Spacebar should be white ), then download the latest Synaptics driver installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp44501-45000/sp44940.exe
Next, open windows Control Panel, open Programs and Features, right click the entry 'Synaptics Pointing Device Driver' and select Uninstall.
When this has completed, shut down the notebook, remove any external devices connected to the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
When windows has fully reloaded - it will automatically load a generic driver for the Touchpad, but just let it do this. Then open your Downloads folder, right click the Synaptics installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Touch pad not working properly for iphone 4s
touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.
Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings -
MY LAPTOP MOUSE TOUCH PAD NOT WORKING
MY LAPTOP MOUSE TOUCH PAD NOT WORKING
When requesting assistance, please provide the full HP model name and/or product number of the computer in question.
It is possible that the touch pad was accidentally turned off... please looking for a symbol on a "F" key tha look like the touch pad and press it. It is also possible that the touch pad on/off button is located elsewhere on the computer. Once we have the requested information, we will be better able to assist you.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
IPod Touch 4G Not Turning On or Connecting to iTunes
I have no idea why, but my iPod Touch will not turn on. When I press the Home button, it will show the low power screen (but only when connected to a USB cable). Holding Home does nothing. Holding Home and whatever the button on the top is results in a brief white flash, then it goes completely black. It won't show up in iTunes, and I've tried everything I can find on Apple's Support pages. I've tried plugging the iPod in both before and after starting up iTunes, I've tried holding the Home button down before plugging it into the USB cable, and I've tried changing where the USB cable is plugged into the computer (despite it being the same port I've used for the past four months, with no real problems).
I'm not sure what, if anything, else I can do, but any help would be greatly appreciated.I'd tried soft-resetting several times (had a similar thing happen before, and that always worked). Don't know why, but I tried holding the Home button while plugging in the USB cable today (had tried it yesterday, with no luck, but I figured why not try again) and it seems to have worked. Read in another post about it shutting off for about 24 hours because of processor overload, but since I usually don't have more than one app running at a time, even in the background, I didn't think that could be it. Clearly I was wrong. Thanks for the assistance, though.
-
Ipod touch will not turn on unless plugged in
My Ipod touch will not turn on, Ive plugged it in and it comes on it has a charge but as soon as I unplug it it goes black ... I have tried to restart it but there is just a black screen
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order -
Ipod Touch will not turn on, recognize itunes and fully function.
My Ipod Touch will not turn on, recognize itunes and fully function. When it does, once in a blue moon, after 5 minutes it freezes. I am wondering if its becuase battery was left dead for 2 weeks or problems with the iOS. Resetting does not help.
Any help will be greatly appreciated.Hi,
Try a Reset
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 15 Seconds...
Turn the iPod On...
If that does not help... See Here:
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414 -
Ipod touch will not turn on, have tried to reset any other ideas?
My ipod touch will not turn on, I have followed the apple fault finding and it will not reset either. Any other ideas?
Try to connect in recovery mode, explained here: iPhone and iPod touch: Unable to restore
-
Ipod touch will not turn on and is not reading in the usb port
ipod touch will not turn on or connect to my computer
I just had a similar problem and tried all of the reboot techniques with no success. I knew it had to be a connection issue inside the iPod, and grasping at straws, I sprayed a little WD-40. I dried it off and let it sit overnight. Today at lunch I plugged it in to my wall charger and it began charging.
***FYI I know they don't recommend spraying WD-40 on your iPod, but it was a last resort for me. I was at the point of paying to send it in for repairs or throwing it away. I wouldn't try this unless you are ready to throw yours away too. -
So one day is was laying next to my ipod touch and i tried to turn it on but it wouldnt. so then i pluged it up to my computer to charge but it didnt charge, the computer didnt pick up the divice. so now my ipod touch will not turn on, and i have no idea why. PLEASE HELP.
mine did the same thing. What I did was hold the home and power button down for 10 seconds but that did not work. I figured out that I just had to hold them down for a long time like 15 to 45 seconds. Then it finally turned on. You may have to do it a couple of time. But if this does not work send it in to the apple company they fixed mine completly free they even sent me a box to send it in. I hope my answer helps you fix it.
-
My 4th generation ipod touch is not turning off when i hold the wake button for few seconds the Voice Control Function Starts Automatically.Please help me to get out of this problem.
Sorry i mistakenly made this question. It was alright. No Problem At ALL
-
TS2771 why my iPod touch is not turning on
why is that my iPod touch does not turning on???
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
my i touch will not turn on
"Apple absolutely is head and shoulders above competition. Thanx Apple, Steve Jobs you are the best! Love, KJK "
That's some serious Kool-Aide there... oh, and BTW, not trying to troll here, but you probably would want to know that SJ died months ago.
Anyway, having same problem with an iPod Touch 3rd Generation 8GB. Although this device is a 1 or 2 years old, it was only used (touched?? lol) a few times, so practically in 'new' shape, but obviously with a dead battery.
Charged overnight
Does not respond to holding power for 10 seconds, or 30 seconds.
Does not respond to holding power AND home for 10 seconds or 30 seconds.
Tried other combinations I've read in these forums such as holding power and home and then releasing the power button
Does nothing when plugging via USB to a PC (tried different PC's) with iTunes along with any of the above combinations of holding buttons. [Device does nothing, nothing shows up in iTunes, no recognition at all from PC, etc.]
I am assuming you mean January 29, 2012 (based on the time of your posting) and not 2011, which if you say you had your device "over 18 months", then I'll see if I, too, will get a replacement device, and "IF" I do, then maybe I'll drink a little of your Kool-Aide, but otherwise I'm quite disapointed that this device is so fragile. -
I pod touch will not turn on and will now not charge - just died - did not drop or spill water on it - HELP. When I plug it into I-Tunes it says the IPOD is in recovery mode
Have you tried to restore the iPod via iTunes on the computer? See the restoring topic on:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
If not successful, what happens when you try to restore the iPod? Any error messages?
Maybe you are looking for
-
Help can someone help me to set up ichat.I have called apple twice and no one seems to have help me. I have set up a mac and aim account, but I am having a problem setting up a video chat with someone else. They also have a mac and aim account, and a
-
What does my Mac Pro's lack of startup Boing mean?
My Mac Pro is equipped with two internal drives, a 600 GB WD VelociRaptor - - which functions as my usual startup drive - - and the WD 640 GB drive that came with the computer. A few weeks ago my computer ceased to make the Boing soud when starting u
-
Problems registering craxdrt.dll
Hi Everybody, I am trying to get an application that makes use of Crystal Reports to build but have run into problems due to dlls not being registered on my build machine. The error message I get is: "The type or namespace name 'CRAXDRT' could not be
-
Error When Sending Service Request Through OWSM Gateway
We are trying to test using OWSM Gateways and Server Agents to sign and then verify messages being passed to a web service on a server. We have been able to get this to work with a simple HelloWorld type service without any problems. We then followed
-
Exporting to motion...weird problem
Hi guys Sorry if my terminology is a little off..i'm new to all this. I am doing wedding. Some of the guests do a dance ---they came up with a silly name for their troop..so i thought i'd freeze frame just as someone took a flash photo of the group-