HP Touchpad in Device Manager

I have HP touchpad which gets detected in Device Manager without driver.
How do I get latest drive on touchpad and install it. So my touch pad can be used as USB mode.
Right now it's not turning on and I tried everything... holding power, Volumne Up, Menu for 15-60 sec with every possible combination. I am assuming tha If I can install correct driver then I can use that as USB and then install webOS may be.
Please help/suggest. I think my touch pad is not dead brick since can see in device manager.

Hello, and Welcome to the HP Support Community!
It's most likely dead, but there are a few things you can try. (BTW, the device needs to turn on to get into "USB Mode").
How to Doctor an HP TouchPad (reflash the ROM)
On your Touchpad be sure to have:
USB cable. The battery is charged to at least 30%.
Computer:
Windows 7, Windows XP, Windows Vista Available USB port (not a hub or secondary port). Java 1.5 or later is installed. If you are not sure about what version of Java you have, or even if Java is installed, go to www.java.com and click the Do I have Java? link to install the latest version of Java. 210MB of storage space. Internet connection.
Miscellaneous Info:
The update process will take approximately 15 minutes. During this process, your device will not be available for use.
Downloading webOS Doctor
Download webOS Doctor on your desktop computer. If you have a webOS profile, get it from http://ws.hpwebos.com/webosdoctor/sorry.htm
If not, check the webOS Internals page: http://www.webos-internals.org/wiki/Webos_Doctor_Versions
Get your TouchPad ready to update
Hold the Power Button for several seconds until a menu appears. Tap Shut Down to completely power down your device.
Running webOS Doctor
Double-click the file that was downloaded to run webOS Doctor. Follow the on screen directions up until you are asked to connect your device. Select the language you selected on your device, and click Next. Confirm your language choice. Click Accept to accept the terms of use. Click Next. webOS Doctor checks your system. BE PATIENT! I've seen this part take a few minutes to complete. After webOS Doctor finishes checking your system, you will be asked to connect your device.
Connecting your device and finishing the webOS Doctor update
Connect your device to your computer using the USB cable. You must connect your device directly to your computer, not through a USB hub or other intermediate device. Now the tricky part. Hold the Volume Up button on the device and insert the USB cable. After the large USB symbol appears on screen, let go of the Volume Up button. If you see the HP logo instead of the large USB symbol, you may have let go of the Volume Up button prematurely. If this occurred , wait until your device boots up, shut down your device and then repeat step 2. Windows will find your device and may offer to install two different drivers. When asked to install drivers of OMAP, select No, not at this time. When asked to install drivers for Palm Novacom (bootie), select Yes and let the drivers install. This may take a while. Once the drivers have been installed, the Next button will become available in webOS Doctor. Click Next. Do not disconnect your device from the computer during the update process. When the Reset Complete screen appears, click Done. Wait a few minutes for your device to reset. You're done!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

G6 2006-tx: synaptic touchpad is not listed in mice and other pointind device (device manager)

hi,
i just upgrade my window 7 home to window 8 pro... and i am now unable to scroll through my touch pad.
before upgrading, my touch pad was working properly, but now its only work as mouse to click items.
neither it scrolling nor zooming using two fingers.
plz tell me, should i have to reinstall my synaptic touch pad drivers?
plz provide me link
model: hp pavillion g6 2006-tx

Hello,
I see that you're having an issue with the touchpad not showing up in the device manager. This could be because you're missing the drivers for the touchpad in Win8.
Here are the drivers you will need to install. Also, go ahead and follow this document if you're having any other issues with the touchpad.
This document has several sections that will help you will every possible issue.
If you have any other questions let me know. Please let me know the outcome to this also.
THX

U300s Trackpad does not appear in device manager

Recently I had an issue where I needed to reinstall windows. I downloaded a legitimate ISO and reinstalled it. When I went to reinstall all of the drivers, I had an issue with the TrackPad driver. I know it is a Cypress Touchpad. When I try to install the driver I get this error message: "Cannot find Cypress Trackpad!". It does not show up in the device manager (only my USB mouse is under the Mice and Keyboard menu.) My question is this: What can I do? I can't reflash the BIOS because I already have the latest one and WinFlash won't let you flash a BIOS with the same or earlier date on it. I have checked and the connection to the motherboard is very secure. What other options do I have? I'm not pleased in the least with this error. Any help is appreciated. I know computers well so if there are any solutions that are on the technical side, throw them at me! Thanks!
As a side note, I used a generic (read: non-OEM) windows ISO because Lenovo does not have a customized (OEM-specific) one easily accessable online.
System Overview:
Lenovo U300s
Intel Core i7-2677M @ 1.8Ghz
4GB RAM
Windows 7 64-Bit SP1

Hi, I recently upgraded to win8.1 and accidentally made it a fresh install soo it was pretty fresh... haha
Well, my touchpad was working but it wasn't recognized in the device manager, someone said that I may had to reinstall the driver that came installed when I bought it, Lenovo has them avaliable here: http://support.lenovo.com/en_US/downloads/default.page?#
After installing it the icon appeared again and I had the options avaliable in the device manager and everything... I think that may be the problem.

Device Manager ! FN button doesn't work

Portege R835-P56X Bios updated to Version 3 The laptop came with 64 Bit but I did a clean install with Windows 7 32 Bit because many of my programs and games didn't work with 64 Bit.
I can't install Toshiba Value Added Package,Toshiba PC Health Monitor and Toshiba eco Utility because they are 64 Bit.Pressing the FN button doesn't work,it does nothing at all using 32 Bit.With 64 Bit it worked fine with screen icons coming up when I pressed it.I wonder if the FN button only work in 64 Bit or maybe Toshiba Value Added Package contains the FN button driver?If anyone knows where to get Toshiba Value Added Package 32 Bit that may fix this problem,please let me know thanks.
I have a problem in Device Manager where it's showing ! Other Devices PCI Simple Communications Controller.I took a screen shot of Device Manager with 64 Bit installed just incase I ran into problems.Looking at the 2 Device managers side by side 32 vs 64 it looks like Microsoft Virtual WiFi Miniport Adapter is missing from the 32 Bit Device Manager.
I'm assuming this is Intel Wireless Display but I'm not 100% sure.Because every time I run Intel Wireless Display I get this error message.Unable to load the Intel My WiFi Technology Dll file
Anyway there is no Intel Display driver for 32 Bit so I had to download that from Intel website.There is however Intel Wireless Display for 32 Bit which I have installed but the ! in device manager remains.So I uninstalled Intel Wireless Display and downloaded the Wireless Display driver 32 Bit from Intel website hoping that might fix the problem.But the ! in device manager remains.
I have also tried windows update but it can't find any driver for Hardware.I have added 2 screen shots in Attachments
Attachments:
2.jpg ‏39 KB
1.jpg ‏167 KB

Well after alot of searching on Google I have finally found out what this PCI Simple Communications Controller is.
It's the Intel Management Engine Interface and lucky for me there is a 32 Bit driver.Now I have no more ! in Device Manager and I have uploaded an updated screen shot.
But now there are 3 questions.
1 What happened to the Microsoft Virtual WiFi Miniport Adapter?It was listed twice in 64 Bit but doesn't show up in 32 Bit Device Manager.
2 Why do I still get the error message when starting Intel Wireless Display?Unable to load the Intel My WiFi Technology Dll file even though I have found the driver for ! in Device Manager
3 Why doesn't the FN button work?It worked fine in 64 Bit but in 32 Bit it does absolutely nothing.The same goes for the touchpad on/off button which worked fine before in 64 Bit.But now with 32 Bit presing it doesn't turn the touchpad on or off,It does nothing.I hope Toshiba releases drivers for both of these features.
Attachments:
Updated Screenshot.jpg ‏49 KB

[GE70 PC2 APACHE] - 2 Devices left in Device manager but all drivers installed

After I installed all the drivers that I found for this Model (GE70 2PC APACHE) I still have 2 things left in my Device manager. But I have no idea whats missing. And Windows cant find any fitting driver. Anyone know maybe what it could be ?
Installed Drivers for Soundcard, Nvidia, Intel Display Driver, Touchpad, Card Reader, Bluetooth, Wifi, LAN. Whats left that could be those 2 devices in Device Manager ?
Cheers
Wolfseye

Hi,
I i don't know what drivers are missing if you have installed all drivers.
What you can do is, install this software " Driver Booster ". This software can detect the missing drivers and install them.
Cheers

Aspire 5750 Trackpad Missing from Device Manager

The HD died on the Aspire 5750 laptop, so I put a new one in, and installed Windows7 64bit. I've managed to get the drivers in for everything except the trackpad. There seems to be no trackpad listed in the Device Manager, and nothing listed with a question mark. Human Interface devices just has the Microsoft Mouse I'm using listed, and it's the same for 'Mice and other pointing devices'. I've tried installing all the drivers listed on the Acer support page, but to no avail. On the Mouse properties, there is a pane marked Elan. However, the options are greyed out, and there is nothing listed under 'device'. Can anyone offer any suggestions?
Thanks.

Install the Elantech drivers:http://global-download.acer.com/GDFiles/Driver/TouchPad/TouchPad_ELANTECH_11.6.2.1_W7x64W7x86_A.zip?acerid=634820030289304671&Step1=NOTEBOOK&Step2=ASPIRE&Step3=ASPIRE%205750&OS=711&LC=en&BC=ACER&SC=PA_6 with device manager open, disconnect any external mouse and try to enable/disable trackpad with Fn+F7 and check on Device manager if something change.

G700 Laptop touchpad/pointing device not working

Hi
Brand new G700 laptop - touchpad worked fine for a week or so then just stopped. Using USB mouse at the moment. A message in the Lenovo support center states that the "Lenovo Pointing Device" is disabled. Installed new driver - didnt help. pointing device is not showing up in device manager.Info on "ELAN" tab on the hardware manager/mouse page is greyed out. Really no idea what to do about this now....help!
Tom

hi tomdeal82,
Welcome to the Forums.
The "Lenovo Pointing Device is disabled" error usually appears if the Touchpad cable is disconnected from the motherboard. To verify this, can you try to launch the OneKey Recovery app (there should be an icon on the desktop) or the OneKey Recovery button and observe.
If the mouse still doesn't work on the OneKey Recovery environment, I recommend you contact lenovo to report the issue as the touchpad is most likely defective. Otherwise, try to perform a system restore or a factory reset to rule out any possible software issues.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

No hardware profiles, nothing in device manager

no hardware profiles and nothing in device manager.

Hi,
Go into Device Manager and check your viewing options.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

No network adapter in device manager

Recently did a system restore on a Pavilion p6750z running Win 7 Professional 64-bit. After the restore was complete there is no network adapter in the device manager. There are no unknown devices there either. It's as if the network adapter does not exist. Tried manually installing the drivers for it - not possible because Windows says there is no adapter. Realtek's diagnostic software does not find it either.
Over the years I have seen NICs fail before, but they would always still be in the device manager even though they did not function. This is the first time I have seen one just disappear from device manager. I suppose that it is just a matter of a bad adapter, it just seems rather odd because it was fine before the system restore.

Hi,
Yes it does seem odd.
Go into Device Manager and rescan the hardware. Use the Action TAB or right mouse click at the top of the device tree on your PC. Do you now see the adapter in Device Manager?
Boot into the bios (F10 setup) and make sure that the on board LAN adapter is enabled. Is it detected and enabled? It should be listed under Advanced.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Ipod 5th Generation 80 GB / Device Manager / Driver not Installed / Code 28

Well, where do I begin! Got my 1st Ipod 2 days ago & still unable to use it! I have installed & uninstalled the itunes 7 software numerous times. On phone w/ Apple for 1 hour...followed by online chat help w/ Dell.
I've tryed 4 different USB ports on my computer. The device Manager shows the Ipod w/ a ? and a ! in yellow. The add new hardware tells me, "Drivers for this device are not installed. Code 28." My computer reconizes that the ipod is plugged in, but will not do anything. There is no communication between the 2. Keeps telling me to insert cd for software for ipod.
Help! Does seem that other people are having similar issues. I think a software cd should of been provided w/ the ipod....not sure if that would of corrected my problem.

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

IPod is not recognized by Windows, iTunes or Device Manager

I'm running Windows XP with external hard drive. When hard drive is connected, iPod will not sync and I get message stating "USB Device Not Recognized. One of the USB devices had malfunctioned..."
When disconnect, iPod will sync. However, iTunes is on external drive; therefore musc is not syncing onto iPod. I've attempted the 5 R's as well as searching for iPod in Device Mananger. When iPod is conncected, it is listed in Devce Manage as "Unknown Device." Articles to solve recommend relettering device, bu how do I get it to be recognized by Device Manager?

I HAVE A SIMILAR PROBLEM TO THAT I JUST BOUGHT MY 30GB IPOD VIDEO ABOUT 4 HOURS AGO, SINCE THEN I HAVE BEEN REALLY STRUGGLING TO INSTALL IT. A SOON AS I GOT IT, I DID EXACTLY WHAT IT SAID, I WENT TO WWW.APPLE.COM/IPOD/START AND DOWNLOADED THE NEWEST ITUNES VERSION. THEN I PLUGGED IN MY IPOD TO MY COMPUTER, AND ALL THAT HAPPENS IS A LITTLE BUBBLE OPENS UP AND SAYS "FOUND NEW HARDWARE" WHEN I CLICK THAT, IT OPENS UP, AND I CLICK "INSTALL THE SOFTWARE AUTOMATICALLY" WHERE IT SAYS IT, THEN I CLICK NEXT AND WAIT. AFTER, IT SAYS "THE HARDWARE WAS NOT INSTALLED BECAUSE THE WIZARD CANNOT FIND THE NECESARRY SOFTWARE".AFTER I WENT TO WWW.APPLE.COM TO FIND OUT WHAT THE PROBLEM WAS, I'VE LOOKED THROUGH AND READ EVERY ARTICLE THAT CAN PERTAIN TO MY SITUTAION, BUT NONE HAVE HELPED ME I AM DISPLEASED TO SAY, THE LAST ARTICLE I READ WAS THIS ONE:
http://docs.info.apple.com/article.html?artnum=305136
BUT EVEN THAT DOES NOT HELP ME BECAUSE WHEN I GET TO STEP 8 WHICH SAYS "Locate the iPod in this list. In some cases one of the entries will have "iPod" in its name. If no such entries are present, the iPod is most likely represented by "USB Mass Storage Device." I LOOK FOR WHERE IT SAYS "IPOD" OR "USB MASS STORAGE DEVICE" UNDER "UNIVERSAL SERIAL BUS CONTROLLERS, AND CANNOT FIND EITHER THING..I HAVE RESTARTED MY COMPUTER A NUMBER OF TIMES, I HAVE EVEN UNISTALLED ITUNES THEN REINSTALLED IT I HAVE STRETCHED EVERY OPTION AND NOTHING HAS WORKED..CAN SOME ONE PLEASE HELP ME??..I HAVE BEEN TRYING TO SOLVE THIS PROBLEM FOR 4 HOURS STRAIGHT STOPPING ONLY TO GO TO THE BATHROOM AND GRAB A BITE TO EAT..

[solved] Digital Camera not recognized in device-manager

My digital camera "Canon Powershot SX120 is" is not recognized by the devicemanager. I have read Digital Cameras.
$ groups
wheel storage users printadmin
The "camera"-Group isn't needed anymore and this group doesn't exist on my system.
The Powershot SX 120 has a MTP/PTP connection mode (as the manual says). But:
# mtp-detect
Unable to open ~/.mtpz-data for reading, MTPZ disabled.libmtp version: 1.1.6
Listing raw device(s)
No raw devices found.
gphoto succeed:
$ gphoto2 --auto-detect
Modell Port
Canon PowerShot SX120 IS usb:002,019
A gphoto --summary could be found here
There is no udev-rule for this camera. If i create one while copying a rule from a similar camera from /etc/udev/rules.d/69-libmtp.rules, and store it into /etc/udev/rules.d/69-canon.rules, the device-manager shows up. My udev-rule:
# Canon PowerShot SX120AX (PTP/MTP mode)
ATTR{idVendor}=="04a9", ATTR{idProduct}=="31e0", SYMLINK+="libmtp-%k", ENV{ID_MTP_DEVICE}="1", ENV{ID_MEDIA_PLAYER}="1"
The device-manager shows me only the option to open with a file-manager. Doing so will result in an error:
The file or folder udi=/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8/ do not exist.
With my udev-rule:
solid-hardware listen
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Listening to add/remove events:
Device Added:
udi = '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
Without the active udev-rule, "solid-hardware listen" produces nothing, but
udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent
KERNEL[5077.662572] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
KERNEL[5077.662655] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
UDEV [5077.681178] add /devices/pci0000:00/0000:00:02.1/usb2/2-8 (usb)
UDEV [5077.693035] add /devices/pci0000:00/0000:00:02.1/usb2/2-8/2-8:1.0 (usb)
Don't know what to do ... is a udev-rule necessary to bring up the message from device-manger? Or is the Camera not recognized as a mtp-device (the Camera has no such settings)? How could i figure it out?
With Digikam i could import Fotos, but i would do so with gwenview. I've tried to check it out with gwenview_importer:
$ gwenview_importer --udi '/org/kde/solid/udev/sys/devices/pci0000:00/0000:00:02.1/usb2/2-8'
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
gwenview_importer: Missing required source folder argument.
(don't care about the different udi, i took this example from a former try) but i don't know, how to find out where the "source folder" is ...
Last edited by quiqueck (2014-02-26 20:10:25)

I have solved this by making an extra udev-rule for my camera. See my adventure on forum.kde.org for details

After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

my webcam in my Dell Inspiron 3521 was working fine with Windows 8. After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is missing in the Device Manager. how can I get the Webcam back?
thank you very much.

I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
The Dell Update utility will recommend drivers that are needed specific to your model.
http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
Good luck!
bill
Regards, Bill Moore @BMooreAtDell

Problem With Device Management in Campus Manager

hi , there are 474 devices in common services device managemant which I grouped them to userdefinedgroups .
then I applied the auto allocation mode in Campus manager to apply all managed devices , when I click apply it mentioned that it would add 474 devices . but after data collection was finished just 461 devices was added and the rest of those are now in the Include devices under device management !!!
why does it hapened ?
thank you .

Hi Marian,
Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
Content Activation Log
Log for Setup ID 20100819135323
20100819 135323[ERROR ]: Current Status: ERROR
20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
20100819 135323[ERROR ]: Prerequisites check failed
20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
Regards,
Rue.

Just boot camped mid-2012 MBP using Apple's BootCamp 5.1.5621. However, no wireless adapter is listed in device manager

[In Windows 8.1] When I access the Device Manager, it does not list my wireless adapter as one of the devices available. I have attempted to manually install the drivers from the BootCamp 5.1.5621 file.
I've spent several hours attempting to remedy this but have only found threads explaining how to solve the problem if the 802 adapter is already listed in the device manager.

I recently had some BT issue's in Win8 so I wrote a topic about this subject. Maybe you need to replace the Broadcom drivers as well.
Please have a look here:
Apple Wireless Keyboard Windows 8 problem
Good luck.
Marcel

HP Touchpad in Device Manager

Similar Messages

Maybe you are looking for