HP Touchpad not working at all

I have a HP Touchpad which isn't responding at all. The screen is blank yet the button is lit up, I know it is charged from my last use. I have tried resetting it with the solutions given such as pressing and holding the home button with the power button, the power button with the volume buttons. I have held them for at least a minute and nothing happened. I have tried connecting it to a laptop, and the computer does not recognise it because its not responding.
Please help.
Thanks

Hi and welcome to the HP Support Community.
If you have not yet been through it, I suggest you review this thread which is "stickied" near the top of this board.  It includes most of the suggestions out there to try to get a non-responsive TouchPad back into operation.
One of my TouchPads went wonky on me the other day, after it sat for several days on a TouchStone charging cradle.  I plugged it in to a wall charger, let it sit again overnight, and the next day had to restart it several times (home and power buttons) before it finally booted up and behaved normally again.
Make sure you use the original charger it came with, a phone charger does not provide enough power.  The micro-usb charging port could also be loose, or the charging cable could be bad.
Keep trying...good luck.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Similar Messages

  • HP Pavilion DV 6000 Mouse/Touchpad Not Working at All PLS HELP!

    I have an HP Pavilion DV 6000. When it is powered on and I log in a screen pops up showing the mousepad with a red line going through it. The mouse does not move at all. Therefore I can not recover or do anything with the computer. Has anyone heard of this????
    Also, the mousepad is not locked & I have tried rebooting the computer numerous times.

    Kbrandt29 wrote:
    I did try a USB mouse a while back. I know it didn't work but I'm not sure what happened. 
    How do you reinstall drivers? Sorry I'm not completely tech-savvy. 
    Thanks so much for your help. 
    First was it a corded usb mouse or a cordless?
    If it was a corded it should've auto installed drivers from Windows itself to get it up and runnig.
    If it was a cordless it should have again auto installed drivers for the dongle when inserted, But the mouse may have needed paired to the dongle, Which is done by usually clicking first on the discover/matching button on the bottom of the mouse itself, then pressing on the button on the dongle itself and that should match them together.
    If it was a newer cordless mouse though most are already matched at the factory so there's no need for pairing much anymore.
    As for installing the drivers it's fairly simple.
    If you have a drivers and application DVD either that you bought from HP, or made yourself if you did a default factory image onto a DVD when you first got your computer, put that disk in your drive and navigate it till you find the driver, It should be marked Input Device Driver.
    Or you can go to HP's Support Site and download the latest driver for your TouchPad and reinstall it from there.
    You'll most likely have to reboot after doing this?
    Let me know if this helps.
    If not I've a couple other ideas, I just don't want to overwhelm you at this point.

  • [Solved]Synaptics Touchpad not working at all on Fujitsu Siemens UH552

    Hi,
    I have just installed Arch on my Fujitsu Siemens UH552 laptop. Everything works except for the touchpad which seems to get loaded by Xorg, but when in X it doesn't work. I have tried both using /dev/input/event* and /dev/input/mouse0 as device paths, neither works.
    xf86-input-evdev and xf86-input-synaptics are installed.
    I have tried running both with the default 10-evdev.conf, with 10-synaptics.conf, with both, and without both.
    TLDR SOLUTION: https://bbs.archlinux.org/viewtopic.php … 3#p1189603
    My current 10-synaptics.conf:
    Section "InputClass"
    Identifier "Touchpad Catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "synaptics"
    Option "TapButton1" "1"
    Option "TapButton2" "2"
    Option "TapButton3" "3"
    EndSection
    Xorg.0.log
    [ 2275.127]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 2275.130] X Protocol Version 11, Revision 0
    [ 2275.131] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 2275.132] Current Operating System: Linux corvo 3.5.3-1-ARCH #1 SMP PREEMPT Sun Aug 26 09:14:51 CEST 2012 x86_64
    [ 2275.132] Kernel command line: root=/dev/sda2 rootflags=subvol=__active ro initrd=/boot/initramfs-linux.img BOOT_IMAGE=/boot/vmlinuz-linux
    [ 2275.134] Build Date: 27 August 2012 08:04:39AM
    [ 2275.135]
    [ 2275.136] Current version of pixman: 0.26.2
    [ 2275.138] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2275.138] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2275.142] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Sep 1 13:16:01 2012
    [ 2275.143] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2275.144] (==) No Layout section. Using the first Screen section.
    [ 2275.144] (==) No screen section available. Using defaults.
    [ 2275.144] (**) |-->Screen "Default Screen Section" (0)
    [ 2275.144] (**) | |-->Monitor "<default monitor>"
    [ 2275.144] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 2275.144] (**) | |-->Device "Intel Graphics"
    [ 2275.144] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2275.144] (==) Automatically adding devices
    [ 2275.144] (==) Automatically enabling devices
    [ 2275.144] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2275.144] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2275.144] Entry deleted from font path.
    [ 2275.144] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2275.144] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 2275.144] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2275.144] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2275.144] (II) Loader magic: 0x7c8b00
    [ 2275.144] (II) Module ABI versions:
    [ 2275.144] X.Org ANSI C Emulation: 0.4
    [ 2275.144] X.Org Video Driver: 12.1
    [ 2275.144] X.Org XInput driver : 16.0
    [ 2275.144] X.Org Server Extension : 6.0
    [ 2275.144] (--) PCI:*(0:0:2:0) 8086:0166:10cf:16c2 rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00002000/64
    [ 2275.144] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2275.144] (II) LoadModule: "extmod"
    [ 2275.144] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2275.145] (II) Module extmod: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension MIT-SCREEN-SAVER
    [ 2275.145] (II) Loading extension XFree86-VidModeExtension
    [ 2275.145] (II) Loading extension XFree86-DGA
    [ 2275.145] (II) Loading extension DPMS
    [ 2275.145] (II) Loading extension XVideo
    [ 2275.145] (II) Loading extension XVideo-MotionCompensation
    [ 2275.145] (II) Loading extension X-Resource
    [ 2275.145] (II) LoadModule: "dbe"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2275.145] (II) Module dbe: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension DOUBLE-BUFFER
    [ 2275.145] (II) LoadModule: "glx"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2275.145] (II) Module glx: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (==) AIGLX enabled
    [ 2275.145] (II) Loading extension GLX
    [ 2275.145] (II) LoadModule: "record"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2275.145] (II) Module record: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.13.0
    [ 2275.145] Module class: X.Org Server Extension
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension RECORD
    [ 2275.145] (II) LoadModule: "dri"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2275.145] (II) Module dri: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.0.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension XFree86-DRI
    [ 2275.145] (II) LoadModule: "dri2"
    [ 2275.145] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2275.145] (II) Module dri2: vendor="X.Org Foundation"
    [ 2275.145] compiled for 1.12.4, module version = 1.2.0
    [ 2275.145] ABI class: X.Org Server Extension, version 6.0
    [ 2275.145] (II) Loading extension DRI2
    [ 2275.145] (II) LoadModule: "intel"
    [ 2275.146] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2275.146] (II) Module intel: vendor="X.Org Foundation"
    [ 2275.146] compiled for 1.12.3.901, module version = 2.20.5
    [ 2275.146] Module class: X.Org Video Driver
    [ 2275.146] ABI class: X.Org Video Driver, version 12.1
    [ 2275.146] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+)
    [ 2275.146] (--) using VT number 7
    [ 2275.149] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.149] drmOpenDevice: open result is 7, (OK)
    [ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 7, (OK)
    [ 2275.150] drmOpenByBusid: drmOpenMinor returns 7
    [ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 8, (OK)
    [ 2275.150] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 2275.150] drmOpenDevice: node name is /dev/dri/card0
    [ 2275.150] drmOpenDevice: open result is 8, (OK)
    [ 2275.150] drmOpenByBusid: drmOpenMinor returns 8
    [ 2275.150] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 2275.150] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2275.150] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2275.150] (==) intel(0): RGB weight 888
    [ 2275.150] (==) intel(0): Default visual is TrueColor
    [ 2275.150] (**) intel(0): Option "AccelMethod" "sna"
    [ 2275.150] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Mobile (GT2)
    [ 2275.151] (**) intel(0): Framebuffer tiled
    [ 2275.151] (**) intel(0): Pixmaps tiled
    [ 2275.151] (**) intel(0): 3D buffers tiled
    [ 2275.151] (**) intel(0): Throttling enabled
    [ 2275.151] (**) intel(0): Delayed flush enabled
    [ 2275.151] (**) intel(0): "Tear free" disabled
    [ 2275.151] (**) intel(0): Forcing per-crtc-pixmaps? no
    [ 2275.151] (II) intel(0): Output LVDS1 has no monitor section
    [ 2275.152] (II) intel(0): found backlight control interface acpi_video0 (type 'firmware')
    [ 2275.152] (II) intel(0): Output VGA1 has no monitor section
    [ 2275.153] (II) intel(0): Output HDMI1 has no monitor section
    [ 2275.193] (II) intel(0): Output DP1 has no monitor section
    [ 2275.193] (II) intel(0): EDID for output LVDS1
    [ 2275.193] (II) intel(0): Manufacturer: LGD Model: 371 Serial#: 0
    [ 2275.193] (II) intel(0): Year: 2012 Week: 0
    [ 2275.193] (II) intel(0): EDID Version: 1.3
    [ 2275.193] (II) intel(0): Digital Display Input
    [ 2275.193] (II) intel(0): Max Image Size [cm]: horiz.: 29 vert.: 16
    [ 2275.193] (II) intel(0): Gamma: 2.20
    [ 2275.193] (II) intel(0): No DPMS capabilities specified
    [ 2275.193] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 2275.193] (II) intel(0): First detailed timing is preferred mode
    [ 2275.193] (II) intel(0): redX: 0.589 redY: 0.347 greenX: 0.343 greenY: 0.555
    [ 2275.193] (II) intel(0): blueX: 0.160 blueY: 0.124 whiteX: 0.313 whiteY: 0.329
    [ 2275.193] (II) intel(0): Manufacturer's mask: 0
    [ 2275.193] (II) intel(0): Supported detailed timing:
    [ 2275.193] (II) intel(0): clock: 70.0 MHz Image Size: 293 x 165 mm
    [ 2275.193] (II) intel(0): h_active: 1366 h_sync: 1402 h_sync_end 1438 h_blank_end 1476 h_border: 0
    [ 2275.193] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 780 v_blanking: 790 v_border: 0
    [ 2275.193] (II) intel(0): LG Display
    [ 2275.193] (II) intel(0): LP133WH2-TLF1
    [ 2275.193] (II) intel(0): EDID (in hex):
    [ 2275.193] (II) intel(0): 00ffffffffffff0030e4710300000000
    [ 2275.193] (II) intel(0): 00160103801d10780afc359658578e29
    [ 2275.193] (II) intel(0): 1f505400000001010101010101010101
    [ 2275.193] (II) intel(0): 010101010101581b566e500016302424
    [ 2275.194] (II) intel(0): 480025a5100000190000000000000000
    [ 2275.194] (II) intel(0): 00000000000000000000000000fe004c
    [ 2275.194] (II) intel(0): 4720446973706c61790a2020000000fe
    [ 2275.194] (II) intel(0): 004c503133335748322d544c463100ce
    [ 2275.194] (II) intel(0): EDID vendor "LGD", prod id 881
    [ 2275.194] (II) intel(0): Printing DDC gathered Modelines:
    [ 2275.194] (II) intel(0): Modeline "1366x768"x0.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
    [ 2275.194] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 2275.194] (II) intel(0): Printing probed modes for output LVDS1
    [ 2275.194] (II) intel(0): Modeline "1366x768"x60.0 70.00 1366 1402 1438 1476 768 772 780 790 -hsync -vsync (47.4 kHz eP)
    [ 2275.194] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 2275.194] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 2275.194] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 2275.194] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 2275.194] (II) intel(0): EDID for output VGA1
    [ 2275.195] (II) intel(0): EDID for output HDMI1
    [ 2275.236] (II) intel(0): EDID for output DP1
    [ 2275.236] (II) intel(0): Output LVDS1 connected
    [ 2275.236] (II) intel(0): Output VGA1 disconnected
    [ 2275.236] (II) intel(0): Output HDMI1 disconnected
    [ 2275.236] (II) intel(0): Output DP1 disconnected
    [ 2275.236] (II) intel(0): Using exact sizes for initial modes
    [ 2275.236] (II) intel(0): Output LVDS1 using initial mode 1366x768
    [ 2275.236] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 2275.236] (**) intel(0): Display dimensions: (290, 160) mm
    [ 2275.236] (**) intel(0): DPI set to (119, 121)
    [ 2275.236] (II) Loading sub module "dri2"
    [ 2275.236] (II) LoadModule: "dri2"
    [ 2275.237] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2275.237] (II) Module dri2: vendor="X.Org Foundation"
    [ 2275.237] compiled for 1.12.4, module version = 1.2.0
    [ 2275.237] ABI class: X.Org Server Extension, version 6.0
    [ 2275.237] (==) Depth 24 pixmap format is 32 bpp
    [ 2275.237] (II) intel(0): SNA initialized with IvyBridge backend
    [ 2275.237] (==) intel(0): Backing store disabled
    [ 2275.237] (==) intel(0): Silken mouse enabled
    [ 2275.237] (II) intel(0): HW Cursor enabled
    [ 2275.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2275.238] (==) intel(0): DPMS enabled
    [ 2275.239] (II) intel(0): [DRI2] Setup complete
    [ 2275.239] (II) intel(0): [DRI2] DRI driver: i965
    [ 2275.239] (II) intel(0): direct rendering: DRI2 Enabled
    [ 2275.239] (==) intel(0): hotplug detection: "enabled"
    [ 2275.239] (--) RandR disabled
    [ 2275.239] (II) Initializing built-in extension Generic Event Extension
    [ 2275.239] (II) Initializing built-in extension SHAPE
    [ 2275.239] (II) Initializing built-in extension MIT-SHM
    [ 2275.239] (II) Initializing built-in extension XInputExtension
    [ 2275.239] (II) Initializing built-in extension XTEST
    [ 2275.239] (II) Initializing built-in extension BIG-REQUESTS
    [ 2275.239] (II) Initializing built-in extension SYNC
    [ 2275.239] (II) Initializing built-in extension XKEYBOARD
    [ 2275.239] (II) Initializing built-in extension XC-MISC
    [ 2275.239] (II) Initializing built-in extension SECURITY
    [ 2275.239] (II) Initializing built-in extension XINERAMA
    [ 2275.239] (II) Initializing built-in extension XFIXES
    [ 2275.239] (II) Initializing built-in extension RENDER
    [ 2275.239] (II) Initializing built-in extension RANDR
    [ 2275.239] (II) Initializing built-in extension COMPOSITE
    [ 2275.239] (II) Initializing built-in extension DAMAGE
    [ 2275.250] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2275.250] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2275.250] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2275.250] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2275.250] (II) AIGLX: Loaded and initialized i965
    [ 2275.250] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2275.251] (II) intel(0): switch to mode 1366x768 on crtc 3 (pipe 0)
    [ 2275.276] (II) intel(0): Setting screen physical size to 361 x 203
    [ 2275.319] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 2275.319] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2275.319] (II) LoadModule: "evdev"
    [ 2275.319] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2275.320] (II) Module evdev: vendor="X.Org Foundation"
    [ 2275.320] compiled for 1.12.3.901, module version = 2.7.3
    [ 2275.320] Module class: X.Org XInput Driver
    [ 2275.320] ABI class: X.Org XInput driver, version 16.0
    [ 2275.320] (II) Using input driver 'evdev' for 'Power Button'
    [ 2275.320] (**) Power Button: always reports core events
    [ 2275.320] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 2275.320] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2275.320] (--) evdev: Power Button: Found keys
    [ 2275.320] (II) evdev: Power Button: Configuring as keyboard
    [ 2275.320] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 2275.320] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 2275.320] (**) Option "xkb_rules" "evdev"
    [ 2275.320] (**) Option "xkb_model" "evdev"
    [ 2275.320] (**) Option "xkb_layout" "se"
    [ 2275.355] (II) config/udev: Adding input device Fujitsu FUJ02E3 (/dev/input/event3)
    [ 2275.356] (**) Fujitsu FUJ02E3: Applying InputClass "evdev keyboard catchall"
    [ 2275.356] (II) Using input driver 'evdev' for 'Fujitsu FUJ02E3'
    [ 2275.356] (**) Fujitsu FUJ02E3: always reports core events
    [ 2275.356] (**) evdev: Fujitsu FUJ02E3: Device: "/dev/input/event3"
    [ 2275.356] (--) evdev: Fujitsu FUJ02E3: Vendor 0 Product 0x6
    [ 2275.356] (--) evdev: Fujitsu FUJ02E3: Found keys
    [ 2275.356] (II) evdev: Fujitsu FUJ02E3: Configuring as keyboard
    [ 2275.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/FUJ02E3:00/input/input3/event3"
    [ 2275.356] (II) XINPUT: Adding extended input device "Fujitsu FUJ02E3" (type: KEYBOARD, id 7)
    [ 2275.356] (**) Option "xkb_rules" "evdev"
    [ 2275.356] (**) Option "xkb_model" "evdev"
    [ 2275.356] (**) Option "xkb_layout" "se"
    [ 2275.357] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
    [ 2275.357] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2275.357] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2275.357] (**) Video Bus: always reports core events
    [ 2275.357] (**) evdev: Video Bus: Device: "/dev/input/event9"
    [ 2275.357] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2275.357] (--) evdev: Video Bus: Found keys
    [ 2275.357] (II) evdev: Video Bus: Configuring as keyboard
    [ 2275.357] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input9/event9"
    [ 2275.357] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
    [ 2275.358] (**) Option "xkb_rules" "evdev"
    [ 2275.358] (**) Option "xkb_model" "evdev"
    [ 2275.358] (**) Option "xkb_layout" "se"
    [ 2275.359] (II) config/udev: Adding input device Fujitsu FUJ02B1 (/dev/input/event2)
    [ 2275.359] (**) Fujitsu FUJ02B1: Applying InputClass "evdev keyboard catchall"
    [ 2275.359] (II) Using input driver 'evdev' for 'Fujitsu FUJ02B1'
    [ 2275.359] (**) Fujitsu FUJ02B1: always reports core events
    [ 2275.359] (**) evdev: Fujitsu FUJ02B1: Device: "/dev/input/event2"
    [ 2275.359] (--) evdev: Fujitsu FUJ02B1: Vendor 0 Product 0x6
    [ 2275.359] (--) evdev: Fujitsu FUJ02B1: Found keys
    [ 2275.359] (II) evdev: Fujitsu FUJ02B1: Configuring as keyboard
    [ 2275.359] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/FUJ02B1:00/input/input2/event2"
    [ 2275.359] (II) XINPUT: Adding extended input device "Fujitsu FUJ02B1" (type: KEYBOARD, id 9)
    [ 2275.359] (**) Option "xkb_rules" "evdev"
    [ 2275.359] (**) Option "xkb_model" "evdev"
    [ 2275.359] (**) Option "xkb_layout" "se"
    [ 2275.360] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 2275.360] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2275.360] (II) Using input driver 'evdev' for 'Power Button'
    [ 2275.360] (**) Power Button: always reports core events
    [ 2275.360] (**) evdev: Power Button: Device: "/dev/input/event5"
    [ 2275.360] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2275.360] (--) evdev: Power Button: Found keys
    [ 2275.360] (II) evdev: Power Button: Configuring as keyboard
    [ 2275.361] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5/event5"
    [ 2275.361] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 10)
    [ 2275.361] (**) Option "xkb_rules" "evdev"
    [ 2275.361] (**) Option "xkb_model" "evdev"
    [ 2275.361] (**) Option "xkb_layout" "se"
    [ 2275.362] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
    [ 2275.362] (II) No input driver specified, ignoring this device.
    [ 2275.362] (II) This device may have been added with another device file.
    [ 2275.362] (II) config/udev: Adding input device FJ Camera (/dev/input/event7)
    [ 2275.362] (**) FJ Camera: Applying InputClass "evdev keyboard catchall"
    [ 2275.362] (II) Using input driver 'evdev' for 'FJ Camera'
    [ 2275.362] (**) FJ Camera: always reports core events
    [ 2275.362] (**) evdev: FJ Camera: Device: "/dev/input/event7"
    [ 2275.363] (--) evdev: FJ Camera: Vendor 0x10f1 Product 0x1a44
    [ 2275.363] (--) evdev: FJ Camera: Found keys
    [ 2275.363] (II) evdev: FJ Camera: Configuring as keyboard
    [ 2275.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input7/event7"
    [ 2275.363] (II) XINPUT: Adding extended input device "FJ Camera" (type: KEYBOARD, id 11)
    [ 2275.363] (**) Option "xkb_rules" "evdev"
    [ 2275.363] (**) Option "xkb_model" "evdev"
    [ 2275.363] (**) Option "xkb_layout" "se"
    [ 2275.364] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
    [ 2275.364] (II) No input driver specified, ignoring this device.
    [ 2275.364] (II) This device may have been added with another device file.
    [ 2275.364] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
    [ 2275.364] (II) No input driver specified, ignoring this device.
    [ 2275.364] (II) This device may have been added with another device file.
    [ 2275.365] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
    [ 2275.365] (II) No input driver specified, ignoring this device.
    [ 2275.365] (II) This device may have been added with another device file.
    [ 2275.365] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2275.365] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2275.365] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2275.366] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2275.366] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2275.366] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2275.366] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2275.366] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2275.366] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
    [ 2275.366] (**) Option "xkb_rules" "evdev"
    [ 2275.366] (**) Option "xkb_model" "evdev"
    [ 2275.366] (**) Option "xkb_layout" "se"
    [ 2275.366] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
    [ 2275.366] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Touchpad Catchall"
    [ 2275.366] (II) LoadModule: "synaptics"
    [ 2275.366] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2275.367] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2275.367] compiled for 1.12.2, module version = 1.6.2
    [ 2275.367] Module class: X.Org XInput Driver
    [ 2275.367] ABI class: X.Org XInput driver, version 16.0
    [ 2275.367] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2275.367] (**) Option "Device" "/dev/input/event8"
    [ 2275.367] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 2275.367] (**) Option "TapButton1" "1"
    [ 2275.367] (**) Option "TapButton2" "2"
    [ 2275.367] (**) Option "TapButton3" "3"
    [ 2275.367] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2275.367] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 2275.367] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
    [ 2275.368] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 2275.368] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.040
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 2275.368] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 2275.368] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 2275.368] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 2275.368] (II) No input driver specified, ignoring this device.
    [ 2275.368] (II) This device may have been added with another device file.
    [ 2275.368] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
    [ 2275.368] (II) No input driver specified, ignoring this device.
    [ 2275.368] (II) This device may have been added with another device file.
    xinput
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Fujitsu FUJ02E3 id=7 [slave keyboard (3)]
    ↳ Video Bus id=8 [slave keyboard (3)]
    ↳ Fujitsu FUJ02B1 id=9 [slave keyboard (3)]
    ↳ Power Button id=10 [slave keyboard (3)]
    ↳ FJ Camera id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    running
    dmesg | grep -i synaptics
    doesn't show anything. However running
    dmesg | grep -i psmouse
    returns a lot of
    psmouse serio1: bad data from KBC - timeout
    Last edited by flako (2012-11-08 09:44:59)

    I have tried doing that with both linux mint, and now fedora live usb. Neither one loads the touchpad correctly.  So yeah, our problems weren't really related
    Anyway, I tried looking into the
    psmouse serio1: bad data from KBC - timeout
    messages, and tried running psmouse proto (defined in /etc/modprobe.conf/psmouse.conf) as both raw and imps as per https://answers.launchpad.net/ubuntu/+s … ion/206950 Unfortunately, that didn't solve anything. Using the raw setting meant that the touchpad wasn't loaded at all (as in not appearing in the Xorg.log at all).
    The laptop is quite new, but at the same time what i figured from the touchpad vendor & product ID, the touchpad itself isn't. So it should technically work. Before installing arch i booted into windows to see if everything worked, and found no issues with the touchpad. So I have ruled out any hardware errors. Maybe its just the Fn-key that doesn't work yet in Linux? But that doesn't explain the "psmouse serio1: bad data from KBC - timeout" Any pointers to where I should look/ what commands I should run to delve deeper into this issue?
    Last edited by flako (2012-09-09 12:10:51)

  • S430 - touchpad not working at all out of the box

    Hi all
    I know there's a few people who have problems with the touchpad on their thinkpads, I've got another, different problem!  
    I got mine out of the box yesterday and neither the touchpad nor the red joystick controller in the keyboard work.  The buttons on the touchpad also don't work.
    Luckily I had a USB mouse at home and I've been able to the laptop up and running, but no luck trying to get the touchpad working.  I've gone through the user guide, the help guide, the lenovo website etc, but not finding anything.
    When I go into the "control panel", then "hardware and sound" and select "device manager",  the only "mice and other pointing devices" that I have is my HID-compliant mouse which seems to be the USB mouse.  The touchpad doesn't feature at all.
    If I go into "control panel" and select "mouse"  I don't actually have a tab for "UltraNav".  Since all the help out there tells me to go to that tab, I don't really know what to do!
    If I go through the Lenovo Solution Center, it tells me that the "ThinkPad UltraNav Pointing Device" is disabled and to fix it I need to go to the Device Manager.
    But, as already said, in the device manager there's nothing I can do!
    Any help would be much appreciated.
    cheers
    Harry

    Hi
    This notebook seems to belong to the PSAF5E series.
    I wonder where you have found the drivers for this series ?:|
    However, I have checked the Toshiba European page and didnt find the Vista touchpad driver especially for this series.
    BUT the page provides some touchpad drivers (two drivers) for the Equium A200 PSAEE.
    I would recommend installing the Alps Electric Touch Pad driver v7.0.301.4 and the Synaptics Touch Pad driver v. 9.1.14.0.
    By the way; its always recommended to reinstall the OS with the Toshiba recovery CD. If you dont have such CD you could order it from the ASP which is responsible for you country.

  • Powerbook G4 17" Keyboard or touchpad not working at all.

    So I have this computer and it used to work perfectly until i decided to add some ram. When I did, something must have shifted and caused a short circuit at the L90 inductor, right beside the keyboard/touchpad connector. The power button still works, and the computer is FULLY usable through VNC. And with my limited knowledge in Macs I cant figure out the precise type of inductor I blew. It's a 3 Cent piece that i can see is all charred and burnt but i don't know what to replace it with.
    Any help would be appreciated.
    Thanks

    rich420 wrote:
      Well I know what the problem is. Its the actual light and connection of the battery and light, it must be loose. Because when I pinch or mess around with the bottom of my phone just under my keys(where there seems to be a piece that could disasswmble from the phone), the light comes on and stays on when I hold it tight, and it flickers and flashes when I fiddle with it.
    I wish you had the foresight to tell me upfront that you knew what the problem was -- there would be a little less guessing on my part and I would be able to get straight to the point.
    rich420 wrote:
      Would it be a good idea to disassemble my whole BB to see if I can fix in the problem inside? Or is that a bad idea? (I don't think I can return it, its my moms old phone, I don't know how long she has had it for). Thanks guys!
    I don't know if you can fix it or not... someone who has done it before might could, for sure.
    For a loose battery connection? Just place a business card a folder sheet of typing paper on top of the battery, replace the battery door and see how that works.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • MSI GS70 20D Touchpad not working after login when I upgraded to 8.1

    Short situation: I upgraded my laptop to windows 8.1, and the touchpad stopped working on the start/desktop screens. I could move it before I logged in, and after it would work for a few seconds, but then it would just stop. An external mouse works just fine, but I still don't want my touchpad not working.
    I looked on the MSI USA technical support page, and it said to delete the old drivers for the touchpad and download new ones. I deleted the drives, but every time I try to download the new ones, I get a window that says my touchpad isn't plugged in, and that the drive isn't compatible with my touchpad, which doesn't make sense to me because I looked up my product specifically and tried all three touchpad drivers. None of them worked.
    Now I can't use the touchpad at all because I deleted the drivers, so it would seem that the computer doesn't know it has a touchpad because it won't register the touchpad in my devices tab.
    Does anyone know what I can do to solve this? Or to at least get the touchpad to register again? I just got this computer for Christmas, I've treated it very well so it hasn't banged up against anything or been dropped or mistreated, so I cannot understand why this is happening. It worked before the 8.1 update, so I'm pretty sure the issue has something to do with that.

    UPDATE: So I managed to fix the touch pad by deleting the driver and rebooting, which is weird because I removed the driver completely and never reinstalled it, so the computer shouldn't really know it has a touch pad. But every time I reboot the computer after fixing it, the touch pad goes back to it's old problem and I need to redelete and reboot all over again.
    Also, My computer has begun to randomly freeze and not respond to anything, with one such event leading to a blue screen with a WHEA_UNCORRECTABLE_ERROR message. The computer has frozen a total of 6 times, at different moments; when I'm typing on microsoft word, at the login screen, even right when it starts up and the msi loading screen is up. 5 of these times have required a forced shut down, the first time the computer shut off on it's own because it ran out of battery power.
    Finally, my computer has begun to periodically for long stretches of time stopped detecting wireless networks and is asking to be plugged into an ethernet cable to connect to the internet. This has never happened to me before, and I know I haven't turned off my network sharing center.
    I'm not sure why this is all suddenly happening. It's not like I'm banging my laptop against walls. I'm very careful when I move and use my GS70, so these problems are greatly concerning to me because I just got this computer at Christmas.

  • Keyboard and touchpad not working after Windows 10 update

    after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine 

    It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

  • Beta games will not work at all.

    When I download beta games into peazip or anotherzip file. they either throw components of the game all over my desktop or, if I put it in a new folder, just do not work. All regular games work fine using this method, just beta games will not work. I extract from zip file onto my desktop in new file, open the exe. in that file to a blank black page. Called HP, they could not help me! I am going crazy with this,as my computer is only a few months old! HELP!!! Thank you very much to anyone who knows how to fix this problem! God bless!

    Terri, welcome to the forum.
    When you say beta games, I want to make certain that I understand what you mean.  Is this a developer (Beta) or games that are in the beta testing stage?  If they are beta test games, it isn't surprising that you are having problems.  Beta test games simply, in many cases, are not ready for prime time.  The best way to handle them is by checking to see if there are patches available.  It would be rare, but possibly the only way to get them to work properly.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Java does not work at all upon using the update manager to update to firefox 3.6.10 for Ubuntu 9.0.4

    OS: Ubuntu 9.0.4
    Browser: Firefox 3.6.10
    upon updating to firefox 3.6.10, java does not work at all.
    websites that use java do not work at all anymore, when they worked just fine before the updating thru update manager. e.g. hulu website cannot play any of the shows.
    i can give the folder of bookmarked pages i tried.
    how to do that on here, i've yet to see if possible.
    i can even give saved text from the terminal concerning certain attempts.
    when i updated thru update manager, it gave some weird java plugin that wasn't there before "The IcedTea Web Browser Plugin IcedTea6 Java Web Browser Plugin (execution of applets on webpages)".
    i uninstalled this as instructed by an answer found in one of the pages i saved, cuz it was conflicting w/another java program the updater said i needed. right now, i don't remember for sure what it was. it perhaps was realplayer flash or Java itself. w/all the hours/days of searching i put in, it's difficult if not downright impossible for me to remember all the specifics of what i tried.
    i've searched throughout many webpages (including many searches on mozilla, ubuntu, java, etc) for instruction in fixing the problem.
    oh, and incidentally, on the Java site, when i try the verify test of Java, firefox pops up with that yellow bar right below the slew of tabbed website windows, giving the statement "additional plugins are required to display all the media on this page. (w/link to) install missing plugins ." which is what i do, go thru the requesting plugin installation. it comes up with, guess what, the IcedTea Java Plugin. i click on the 'next' in the "Plugin Finder Service" box that pops up, & all it gives me is "No plugins were installed. IcedTea ...Plugin failed. and the link 'find out more about plugins or manually find missing plugins'". the link takes me to some of the very things/plugins that wouldn't install in the first place. the Java test failure is a LOL funny, as what plugin it is saying is required (IcedTea) is a recommended alternate program to display the very test in the first place.
    i followed the given instructions on those many searched pages, in every case (barring what i may have just plain missed), but to no avail.
    i've even gone to the point of trying to reinstall the previous 3.5.13 firefox version, from mozilla site. even that wouldn't install.
    i've tried installing Java for my sys direct from it's site. nada.
    now it's time for me to post the problem & perhaps someone will come up with some kind of "dummy" way to fix it.
    until then many sites a regularly use are totally useless to me on this fast puter.
    the only way i can get to use such sites, are two choices: 1. use a dinosaur laptop, which is slower than molasses & cannot handle to any streaming stuff, or 2. use an available internet access puter at the library. but useage for ea person per day is limited to only one hour a day. and one can end up waiting for an hour or more ( in the busiest periods) to even get to use one.
    so, is there anyone at all, who knows any for-sure working fix for this problem?
    thanks muchly :^D
    p.s. i can't pay anybody any money for such help, as is required in certain sites (e.g. Java website), cuz i don't have any.
    i can pay in labor tho, if there is someway to find someone who can physically be at this puter w/me, taking me step-by-step
    sorry for the 20-pg essay. i hope it was all clearly understood. if, not, well, clear communication is always what is needed, ask away.

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

    My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
    I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

    Reset Firefox to its default state
    If you're having major problems which you can't resolve, start fresh with only your essential information.
    Troubleshooting Information
    This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
    Application Basics
    Name Firefox
    Version 33.0.1
    Update History
    User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
    Profile Folder
    Enabled Plugins about:plugins
    Build Configuration about:buildconfig
    Memory Use about:memory
    Multiprocess Windows 0/1
    Crash Reports for the Last 3 Days
    Report ID Submitted
    All Crash Reports
    Extensions
    Name Version Enabled ID
    Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
    Adblock Plus Pop-up Addon 0.9.2 true [email protected]
    Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
    Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
    Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
    Graphics
    Adapter Description Intel(R) HD Graphics
    Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
    Adapter RAM Unknown
    Device ID 0x0046
    Direct2D Enabled true
    DirectWrite Enabled true (6.2.9200.16571)
    Driver Date 1-30-2013
    Driver Version 8.15.10.2993
    GPU #2 Active false
    GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
    Vendor ID 0x8086
    WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
    windowLayerManagerRemote true
    AzureCanvasBackend direct2d
    AzureContentBackend direct2d
    AzureFallbackCanvasBackend cairo
    AzureSkiaAccelerated 0
    Important Modified Preferences
    Name Value accessibility.blockautorefresh true
    accessibility.typeaheadfind.flashBar 0
    browser.cache.disk.capacity 358400
    browser.cache.disk.smart_size_cached_value 358400
    browser.cache.disk.smart_size.first_run false
    browser.cache.disk.smart_size.use_old_max false
    browser.cache.frecency_experiment 1
    browser.places.smartBookmarksVersion 7
    browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
    browser.startup.homepage www.google.com
    browser.startup.homepage_override.buildID 20141023194920
    browser.startup.homepage_override.mstone 33.0.1
    browser.tabs.loadInBackground false
    dom.mozApps.used true
    extensions.lastAppVersion 33.0.1
    font.internaluseonly.changed true
    gfx.direct3d.last_used_feature_level_idx 1
    keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
    media.gmp-gmpopenh264.lastUpdate 1413750166
    media.gmp-gmpopenh264.version 1.1
    media.gmp-manager.lastCheck 1414375733
    network.cookie.prefsMigrated true
    places.database.lastMaintenance 1414404204
    places.history.expiration.transient_current_max_pages 102059
    plugin.disable_full_page_plugin_for_types application/pdf
    plugin.importedState true
    plugin.state.npmedia 0
    plugin.state.nptimegrid 1
    print.printer_Canon_MG2100_series_Printer.print_bgcolor false
    print.printer_Canon_MG2100_series_Printer.print_bgimages false
    print.printer_Canon_MG2100_series_Printer.print_colorspace
    print.printer_Canon_MG2100_series_Printer.print_command
    print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
    print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
    print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_edge_left 0
    print.printer_Canon_MG2100_series_Printer.print_edge_right 0
    print.printer_Canon_MG2100_series_Printer.print_edge_top 0
    print.printer_Canon_MG2100_series_Printer.print_evenpages true
    print.printer_Canon_MG2100_series_Printer.print_footercenter
    print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
    print.printer_Canon_MG2100_series_Printer.print_footerright &D
    print.printer_Canon_MG2100_series_Printer.print_headercenter
    print.printer_Canon_MG2100_series_Printer.print_headerleft &T
    print.printer_Canon_MG2100_series_Printer.print_headerright &U
    print.printer_Canon_MG2100_series_Printer.print_in_color true
    print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
    print.printer_Canon_MG2100_series_Printer.print_oddpages true
    print.printer_Canon_MG2100_series_Printer.print_orientation 0
    print.printer_Canon_MG2100_series_Printer.print_page_delay 50
    print.printer_Canon_MG2100_series_Printer.print_paper_data 1
    print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
    print.printer_Canon_MG2100_series_Printer.print_paper_name
    print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
    print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
    print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
    print.printer_Canon_MG2100_series_Printer.print_plex_name
    print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
    print.printer_Canon_MG2100_series_Printer.print_resolution_name
    print.printer_Canon_MG2100_series_Printer.print_reversed false
    print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
    print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
    print.printer_Canon_MG2100_series_Printer.print_to_file false
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
    privacy.sanitize.migrateFx3Prefs true
    privacy.sanitize.timeSpan 2
    storage.vacuum.last.index 1
    storage.vacuum.last.places.sqlite 1412311800
    Important Locked Preferences
    Name Value
    JavaScript
    Incremental GC true
    Accessibility
    Activated false
    Prevent Accessibility 0
    Library Versions
    Expected minimum version Version in use
    NSPR 4.10.7 4.10.7
    NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSUTIL 3.17.1 3.17.1
    Experimental Features
    Name ID Description Active End Date Homepage

  • HT201210 i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow undernieth and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    i updated my 4s yesterday, but my phone will not work at all now, and will not turn off. It has a itunes image on the screen with an arrow underneath and what looks like the charger lead. i've had it on charge! is there anything else i can do?

    Cconnect it to your computer with the latest version of iTunes installed.

  • TS1424 I was buying songs on my itune account, and now my itunes icon on my computer will not work at all, I do not know how to sign back into

    I was buying songs on my Itunes account and I signed-out and now my Itunes icon on my desktop will not work at all.  How do you access your account

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

  • I have spent the last hour trying to upgrade my Iphone using ITunes.  Now, my phone will not work at all.  I think the backup is on my computrer, but it appears now to upload.  What to do?

    I have spent the last hour trying to upgrade my IPhone to IOS 7 using ITUnes.  Now, my phone wil not work at all.  I think it is backed up on my computer, but I am unable to get it to download to the phone.  What to do?

    Thanks, as it still will not work, I assume it is damaged and needs to be sent in for repairs.
    Tim

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

    i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Maybe you are looking for