HP Touchsmart 520 1020it - missing driver after OS re-install

After OS re-install I am missing drivers for the following HW ids
PCI\VEN_8086&DEV_1C22&SUBSYS_2AC3103C&REV_05
ACPI\ITE8715
Could you please help?

If you need drivers, please follow these steps:
1. In the Run box type devmgmt.msc.
2. Unknown devices would be listed as such and marked out with a yellow question mark.
3. Select the unknown device or other device for which you need drivers and right click to access Properties.
4. In the Properties window click on Details tab and select Device Instance Id or Hardware ID from the drop down.
5. An alphanumeric string like this PCI\VEN_1217&DEV_7130&SUBSYS_012F1025&REV_01\4&6B16D5B&0&33F0 is the identification marker for the device.
6. Please provide this number so that we can suggest the appropriate driver.
I am an HP employee.
Regards,
Vidya
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the bottom right side of my post to say thanks!***

Similar Messages

Missing audio driver after upgrade/Skype install

Hi,
A few days a ago I fresh installed Arch 64b/KDE 4.5.1 on a new PC and fully updated it.
During the installation, I remember alsa has worked fine
Yesterday I've installed Skype from repositories (inc 32b libraries), and upgraded to x-server 1.90 (as part of a full upgarde).
Ever since, upon login KDE complaints about a missing audio device (which it did NOT before), Skype offers only Pulse audio (and does NOT work), and my on board audio driver is missing.
Although on-board audio IS ENABLED at the BIOS, the on board audio modules are NOT loaded as indicated by the following:
lspci | grep Audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio [Radeon HD 5600 Series]
(I've an ATI 5600 PCIe graphic card which includes also an HDMI output, and an on-board Realtek ACL 889 audio controller).
Please advise how to restore full audio functionality from on-board controller?
Thanks!
MoBo is Gigabyte GA 890FX UD5

Hi mhohhman,
X230 does uses different driver with E530. Please refer followig link for driver.
Realtek High Definition Audio Driver for Windows 7 (32-bit, 64-bit), XP - ThinkPad
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029024
Fred
T61 + X201i

Re: HP OfficeJet 4500 G510N-Z and Windows 7 Home Premium. Always Missing Driver after Install

I have a J4680c and I'm useing mac OS X 10.6.8. How do I go about obtaining soft ware and drivers ?
This question was solved.
View Solution.

Hello @r56,
Thanks for getting back to me regarding this driver issue. I am very happy to hear that the driver link I provided you ended up correcting your issue.
If you feel that the information provided in my prior post resolved your issue could you please mark my post as an Accepted Solution so other users of the HP Support Forums can quickly and easily find this fix.
Thanks again for reaching out to the HP Support Forums. Have a nice day!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How do I migrate from a former user account on an external drive after a clean install?

This question has been partially answered before but not to my satisfaction and, from what I've found, not for Mountain Lion.
My MBPr was running fine for a week after I transfered my User account to an external drive. After some reorganization I decided to move the acount to a different external drive. I blundered and, for whatever reason, was unable to log in to any account on my MBPr. Not even my backup account - which suprised me. (I tried repairing disks, permissions, etc...) I tried to resolve it on the phone with Apple to no avail. Finally, I gave up. I booted into recovery and did a reinstall. After 12 hours I came back to find that it wasn't a clean reinstall. And I still couldn't log in to anything.
I then did an erase and reinstall. After another 12 hours I now have a clean install of Mountain Lion on my MBPr. I have an external drive with my former working user directory (Home:Users/mrmoose) on it. (BTW, It is LARGER than my internal SSD drive, it is not bootable, AND I have no backup of it in Time Machine format.)
My current user account is Macintosh HD:Users/bullwinkle
1) Is there a way to "reclaim" my user account on the external drive - possibly without even copying or migrating?
2) Can I copy the contents of bullwinkle (excluding some of my folders under Documents so it fits) to Macintosh HD Users/bullwinkle? Including the Library folder? I have audio plugins, etc...
I'd still like my User directory on an external drive. But I will settle for keeping it on the internal drive. I just want my info back.
Why, oh, why does Migration Assistant require your data to be in TIME MACHINE format only - why can one not migrate from a full copy on an external drive? Why can't it look at the darn thing and say, "Hey, that's a copy of an OSX User directory. I can migrate data from that."?
I would greatly appreciate a detailed response. THANK YOU. Lama Out.

~/Library is probably the one you don't want to move back because it may bring the issues back along with it.
All your own data you can drag & drop. You can drag the contents of any folder Movies, Music, Pictures, Documents (or as much as you want).
Rather than try to replace the Library you can take ~/Library/Application Support, Mail, Safari and any other folders you need.
To access your hidden ~/Library folder go to your Finder "Go" menu hold the option key to choose "Library".
Then you can drag it to the Sidebar for easy access.

Can't find iTunes Library on external drive after iTunes 8 install

My music library (50GB) has always been on an external drive. After installing iTunes 8 I went to preferences to change from default to this drive but nothing showed up. The complete library is still on the disk. Tried reinstalling V 7 but still no luck.
Any ideas how to "reconnect" the library ?
iPOD is also still complete. Is there a reverse recovery that my iPOD content could be retrieved to my external drive as the library ?
Message was edited by: samben52

Changing the Library location within iTunes instructs the program were to store future music when Importing - not where to go look for current music.
You music files may be on the ExHD, but your music metadata (Playlists, Playcounts, Ratings, and other potential important attributes) are kept in the Library Database file. See: What are the iTunes Library files?
If you did not save a copy of this file, you may be in for a long recovery.
This well-written iLounge Article is a must-read for anyone who wants/needs a better understanding of how iTunes manages your music. It may shed some light on what you need to do next. or at the very least, help you describe your specific problem here a bit better.
Also see: Managing your iTunes Library on an External Hard Drive
Best of Luck

Keeping links to second drive after SL clean install.

Hi, I am going to wipe and clean install SL and I want to make sure I don't break the links from iMovie to all my events that are on a separate drive from the OS. My projects are on the Boot Drive in the Movies folder. Can someone recommend the best way to do this?
Thanks.

At least two ways to do this...
1) Make a backup of your current internal drive using SuperDuper, Carbon Copy Cloner, or something similar. I use SuperDuper. After doing your clean install, you can migrate your apps back to the mac through the installation process.
OR
2) You can move your projects to the external drive before you do the reinstall. Use iMovie. Make sure you have clicked VIEW/EVENTS BY DISK so you can see the external drive. In the iMovie Project Library List, hold down the Command Key while dragging the icons for the project to the icon for the external drive. Then right-click on the Project (each one) and use the consolidate command to bring over any music or photos or events if necessary.
Open the project in iMovie and make sure it works in the new location. I recommend you thoroughly read the iMovie Help on the Consolidate command before doing this.

Missing themes after and archive/install

After performing an archive/install I can open iDVD, but there are no themes available and the imovie I'm moving over does not play, it's just black. Can anyone can tell me where the themes are stored and if I can access them again?

The iDVD themes will be stored in Library/Applications Support/iDVD/Themes. See if they are in there. Assuming that they are, try closing iDVD and then trashing the file named com.apple.iDVD.plist. iDVD will create a new .plist file on relaunch. Before relaunching, do a permissions repair using the Utilities/Disk Utility app on your Mac.

Missing mail after "archive and install"

Hello,
I went to talk to the folks at the "genius bar" today because my powerbook fan has been blazing like crazy. I had OS 10.4 on my computer, which I had installed from an upgrade about a year ago. I bought the computer a few months before that, when it still shipped with OS 10.3. So the guy at the mac store told me to re-install the system using the archive and install feature and the original install disks. He told me to re-install 10.3, which came with the computer, and then to run the upgrade that I have to get it back to 10.4.
I am having some problems. I have reinstalled X.3 and find that when I open the Mail application, all of my messages of the last year are gone. I can't find them anywhere. But everything else on the computer seems untouched...all of my documents, and even old emails from before I made the upgrade to 10.4, one year ago.
I am afraid that if I do anything else, like install 10.4 that I will lose any chance of recovering these files. Does anybody have any advice on where I can recover the emails from my inbox and other folders? The guy at the apple store assured me that everything would be saved by clicking the "preserve users and network settings" option in the re-install program.
Or will everything show up again when I re-install 10.4? I was holding off on doing this because I wanted to see if the fan would run less using the older system, as someone suggested that I try this. I also tried to "import" the inbox in the library/mail folder, but this only imported all of the messages that I already have...not the lost ones.
thanks for any advice!
colin

Did the folks or this person at the "genius bar" also recommend that you create or update your backup before performing an Archive & Install?
If not, a "genius" he ain't.
The mbox filing structure used with Tiger Mail is significantly different than the mbox filing structure used with previous Mail.app versions under Jaguar and Panther.
Tiger Mail stores each message contained in a mailbox as a separate file in .emix format located within the Messages folder for the mailbox. Although you can import Jaguar and Panther mailboxes to Tiger, the mbox format used with Tiger Mail is not backwards compatible or interchangeable with Jaguar or Panther Mail without taking an additional step first. The reason you are seeing the old messages available before and up until the time you upgraded to Tiger is because you didn't delete the left over content package files used by Panther Mail and one of these files contains all messages messages and message attachments which are not automatically deleted after the conversion process to the mbox format used with Tiger Mail is completed.
Using the Finder, go to Home > Library > Mail > this POP account named folder (named by the user name and incoming mail server for the account). Within the account named folder is there an INBOX.mbox file and/or an INBOX.mbox named folder and the same for the other mailboxes (mboxes) within the account named folder?
Tiger Mail.app mboxes at the Finder level are folders and each folder contains a Messages folder which stores each message contained in the mailbox as a separate file in .emix format.
Jaguar and Panther Mail.app mboxes are .mbox files only, not a folder.

Touchsmart IQ770 - IR stopped working after Windows 7 Install

Have had the satellite hookup working under Vista. Loaded up Windows 7 and now when I try to setup the tuner the IR is not found.
During Tuner setup I see the signal and hear the audio, it is just the IR part that stops the setup configuration from working.
Could the Bluetooth be interference?

Try to install the HP Remote Solution software when it becomes available to see if that works.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01778879&lc=en&dlc=en&cc=us&product=3781376&lan...
Certain buttons on the Remote Control for Media Center might stop working.
Update to the latest HP Remote solution download from www.hp.com/support .

Various missing drivers after re-installing Win7 64 bit on hp pavilion dv7-6111eo

Aloha
First off... I'm no techy, geek or nerd... And I mean those words in the best way, to those who are.
In this case You need to see me like a kid in kindergarden, being taken by the hand, and being shown what to do, down the the last detail. Sad but true.
Without me knowing why, I experienced missing several DLL-files, and often got error messages about those.
A pain in the neck, so I re-installed Windows 7 64 bit, as I didn't want to mess with those DLLs missing.
After that re-installing, I couldn't get internet-connection to my router. Luckily I have a 10+ year old stationary, where I after some time found the driver I needed, so that works now.
But now it seems there's several other drivers missing/not been installed.
I got a little info, from another post, what to provide with info, and hope that will be enough. if not, then please let me know the additional info that may be needed, and where I can find those on my PC, so I can provide these.
Missing drivers:
Network Controller;
Hardware ID: PCI\VEN_8086&DEV_008B&SUBSYS_53158086&REV_34
SM Bus Controller;
Hardware ID: PCI\VEN_8086&DEV_1C22&SUBSYS_1659103C&REV_05
Universal Serial Bus (USB) Controller;
Hardware ID: PCI\VEN_1033&DEV_0194&SUBSYS_1659103C&REV_04
I have 4 USB-ports, but only one will work, the others don't respond, and I need all four running at the same time. Plus I'd like to have everything in order after I had to re-install Win 7.
I thank You in advance for any and every help I can get. Just have in mind, that I need the things carved into paper.
This question was solved.
View Solution.

Hi:
You need these drivers...
SM Bus Controller; Install this first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-2&cc=us&dlc=en&lc=en...
Network Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99014-2&cc=us&dlc=en&lc=en&...
Universal Serial Bus (USB) Controller;
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100294-2&cc=us&dlc=en&lc=en...
You will also need this bluetooth driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99500-2&cc=us&dlc=en&lc=en&...

Movies re-imported from external drive after crash will not sync to iPod

A while back my hard drive crashed. I had backed up all my iTunes music and movies to an external drive, so I re-imported them to the repaired hard drive after it was installed. All of the music (purchased and ripped) transferred fine, but the movies I had purchased from iTunes will not sync back to my iPod. I've tried selecting them individually under the Movies tab in the "My iPod" screen within iTunes and then syncing, but nothing happens. I've tried re-importing from iTunes and doing the same thing, but to no avail. Help!

while the iPod is connected to itunes, control-click on its name in the source list on the left. click Reset Warnings. try another sync with the movies you want selected. you should get a warning that says either something like this: "There is not enough room on the iPod to sync all selected material. please remove some items." or something like this: "the format of the videos is not supported by the iPod" if it says the first one, do option 1. if it is the second one, do option 2. if it is neither of them, i don't have any ideas.
1.The iPod doesn't have enough space on it to fit all of the video. you have to take someting off the ipod to put anything more on.
2. you need to select the movies in iTunes, then go to the advanced menu and click Create iPod/iPhone Version, or Convert for iPod or iPhone, whichever appears. that will make a copy of the videos in a format that the ipod can read. you can remove the original copy from your library. you can keep the files if you want. now just select the new ones and sync them. everything should work.

Hard Drive failed- new one installed - won't boot - fans going full

I have a mac mini one of the earlier intels. I came home and the fans were going full on, I turned it off and treid to restart.. and got the empty folder. So I guessed it was the hard drive. Took it out and tested it on my enclosure - with disk utility - buggered.
So I installed another hard drive after I had installed the OS. As soon as I connected the powere cord the fans still going full on.
I still get the missing folder symbol.
I tried booting off a usb connected hard drive and it starts up.
Any ideas?
I am guessing the hard drive has caused some other issue, can I do an internal reset?
Also, when I boot off the external hard drive and open disk utlity - I can see the other internel hard drive??
But it wont boot from it?
Appreciate any ideas... I have run out!!
Thanks in advance
Ross

AHA, just fan issue?
Tukaine
Sep 23, 2012 10:59 PM
Since the late 2009 iMacs came out, replacing the hard drive has caused the internal Hard Drive Fan to start running at around 6000RPM.
This is due to Apple replacing the external Hard Drive temperature sensor with a proprietary firmware and using the drives internal sensor.
Replacement drives do not contain the firmware to deliver temperature data on the temperature sensor cable.
When the iMac does not receive a good signal from the hard drive it puts the fan at full speed to protect the drive.
If you replace your drive, your iMac will initially seem fine, but soon the fan will begin to speed up to full speed. Resetting the SMC (System Management Controller) will have a temporary effect, but again the fan will speed up.
Fixes people have used in the past included:
Using smcFanControl and the terminal to set a MAX speed for the fan and writing scripts to start this after every sleep/restart.
Shorting the temperature sensor cable (Not a possibility on 2011 iMacs) this tricks the iMac into thinking the drives temperature is very low, hence slow fan speed.
Both these fixes are less then perfect and leave the drive in a dangerous situation with no protection from overheating.
Another option people try is other Fan Control software. These programs will not work for this particular issue as they often only control the base speed, and if they do control the fans actual speed they rely on the temperature reported by the sensor which is now incorrect.
HDD Fan Control
HDD Fan Control works to fix this issue by reading the drives internal temperature using the S.M.A.R.T protocol and set the fans actual speed to a value good to protect the drive.
It runs at startup and continually to always control the fan correctly, prevent the loud fan noise and protect the drive from overheating
Instead of HDDFan Control, get the free SSDFan Control
http://exirion.net/ssdfanctrl/

TouchSmart 520 Windows 7 Home premium Problems after critical updates

After my TouchSmart 520 auto ran critical updates on 13 Feb 2013,I cannot connect to Internet at all.It was still able to connect to my home wireless network.
I did a systerm recovery, to restore up to just before the critical updates on 13 Feb, then it's able to connect to internet. After that, it auto ran critical updates 2 times, and the same problem started.I have done the system recovery again and now turn off the downloading and installation of critical updates completely, but this should not be long term solution.
Has anyone encounter same problem or is able to help me on this? What else do I need to do?
Appreicate any help.TIA!

Hello sgcosimo,
You’re not able to connect to the internet after updates have run. I’ve had that happen before and usually Microsoft will send out an update that fixes the problem a few days later.
You can try to run the updates again to see if you still get the error.
If you’re still not able to get online, go into device manger and uninstall the Wi-Fi adapter and restart the computer.
Here is a link to uninstall the adapter.
Let me know if this helps.

Hard Drive for Touchsmart 520-1050

Hello,
I am currently looking to replace the internal hard drive in my touchsmart 520-1050. However, I am having trouble with locating the size this computer needs. Meaning the physical (in inches) size. If anyone has any idea, I'd appreciate your input.
Thanks

SKD1983, welcome to the forum.
Here is a guide that will help you access the hard drive. Read it carefully and watch the video before buying the hard drive. You can measure the drive once you get to it. It will be either 2.5" or 3.5". I could not find the exact size anywhere, but measuring is the safest way to make the determination. You should buy one that is at least 1 TB to be able to use the System Recovery media.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP ENVY TouchSmart 15-j009wm Doesnt read USB Flash Drive After Downgrade to Windows 7

I Have Downgraded Installed Windows 7 Through Flash Drive But i need help. Windows 7 Doesnt read my Flash Drive anymore? It can read my USB Keyboard but doesnt read USB Flash Drive. I Have no Internet On The Computer, So that means i cant update my drivers. And i have some drivers in my flash drive i want to install, but i cant. I have read this: http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-ENVY-TouchSmart-15-j040us/td-p/4576592 It doesnt do me any good anymore because i cant acces my drivers from USB

Hi: Looking at your other posts it appears you have painted yourself into a corner. Since there is no legacy or auto USB setting in the BIOS, your only option would be to remove the hard drive, put it in a USB to sata notebook hard drive enclosure, plug it into another PC so it can be read, download the applicable drivers you need and copy them to you user profile on the removed hard drive. The service manual, chapter 5 provides the removal and replacement procedures for the hard drive. http://h10032.www1.hp.com/ctg/Manual/c03733656 Reinstall the hard drive, run the drivers, and you should be good to go. These would be the drivers you need for your model... SM bus controller: Install this first and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_127691_1 USB3: Install both of these and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=4058 http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

HP Touchsmart 520 1020it - missing driver after OS re-install

Similar Messages

Maybe you are looking for