HP TouchSmart 9100 not reading any wifi...

I have an HP TouchSmart 9100 that is not reading the wifi at all. It is a 32 bit Windows 7 Professional system. The drivers it has for netowrk adapters are the two bluetooth Device drivers and the Realtek PCIe GBE Family Controller. There isn't a wifi driver and when I try to download it from the HP site, nothing happens. It just keeps looping when I go through the wizard and nothing happens even after I restart the computer. Anyone know what might be happening?

Hi JayAtMpd,
I understand you have a HP Touchsmart 9100 that will not even give you a boot screen for the BIOS, correct?
If the HDD is not functioning you would not see the BIOS. Video card not functioning you would see the BIOS and be able to perform some diagnostics on the computer. If you remove the HDD you would not be able to do anything with the HP Touchsmart 9100.
Here is a link to your product.
http://bit.ly/KkPyjr
I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at http://h30499.www3.hp.com/hpeb/
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Similar Messages

My iphone 4s is no longer detecting wifi since the ISO8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!!

My iphone 4s is no longer detecting wifi since the IOS8 updates came out. I've restarted, rest the networks, reset the phone back to factory settings, and even tried the freezer trick. It is STILL not detecting ANY wifi networks. HELP!!! I cannot afford to go over my data and I use wifi at home and work... I believe the updates have caused the issue, because it was working fine before the second update released (I hadn't put the first one one until I noticed it had stopped working, and by then the second IOS8 version had came out). They need to do a third update to fix this issue.

If it's grayed out:
Reset Network Settings - if that doesn't fix it, then Backup and Restore AS A NEW DEVICE.
If it's still grayed out, unfortunately that means your Wi-Fi antenna quit, and it needs service.

TS1398 my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help

When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network?

TS1398 my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

my ipone 4s does not see any wifi networks my ipad works ok tried all of the above resetting network etc still does not see wifi ?

If no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem with the wireless card or with something else.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated

This is usually a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

CD/DVD Drive is not reading any discs on Equium A100

My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

Hello,
Here are a few windows articles that could help.
http://support.microsoft.com/kb/891894/en-us
This one might do the trick, if not try this one.
http://support.microsoft.com/kb/826510/en-us
Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
If not, it will have to be replace.
Allan

HT2801 Hello ..im currently using iMAC snowleopard 10.6.8 3.06 GHZ INTEL core i3 4GB 1333MHz DDR3......my problem is that my mac accepts cds and dvds...but the icon does not appear in the finder and desktop either.....more over it does not read any cd or

hello im currently using....iMAC snowleopard 10.6.8
3.06 GHz intel i3

i need some help please....my mac acceppts cds and dvds... my drive is located at the right of the screen.....but no icon appears in desktop and finder......also...it does not read....any cd....does not read any dvd either.....it ejects the cds after a while on its own....also it does not burn any cd.....wen i tried....errors with 0x06 ....medium errors,....show up.....also...i tried reinstalling the mac os.....but when i restart the pc...and...keep C key pressed...the cd just gets ejected.....can someone please help me with this problem?????? i contacted APPLE too.. but they said it must be a software problem......also no apple macbookair superdrive does not get connected to the mac either.....PLEASE HELP!!!!

Could not read any NLS message catalogue! while applying patch

Hey,
I am posting on behalf of someone.
We are trying to install an Oracle patch (the patch p3948480_9206_AIX64-5L) on AIX 5.3.
We get the error Message:
ERROR: Could not read any NLS message catalogue!
I have checked the Paths and install additional language packs to match the install of another machine we have the Oracle path installed on which hasnt helped.
the NLSPATH leads to directories which are correct.
Is it critical that the LANG environment variable be "C" ?
Thanks in advance
Derek

Oracle Universal Installer needs some files in the directory where the runInstaller (UNIX) or setup.exe (Windows) is running. So, when you invoke runInstaller (UNIX) or setup.exe (Windows), you should invoke it from the directory where this command is present, or you must specify the complete path.
~ Madrid.

Could not read any NLS message catalogue (10gR2/Centos4 kernel 2.6.9-34.EL)

Hello,
I'm trying to install Oracle 10gR2 on CentOS4 (kernel 2.6.9-34.EL).
I followed the pre-installation tasks the best I could, but when I try to launch runInstaller from the location where I uncompressed the setup files, I am getting error "Could not read any NLS message catalogue!"
I'm new to both Oracle and Linux, so I don't really know which direction this is complaining about.
Any pointer would be appreciated ;)
Thanks in advance for your support

Oracle Universal Installer needs some files in the directory where the runInstaller (UNIX) or setup.exe (Windows) is running. So, when you invoke runInstaller (UNIX) or setup.exe (Windows), you should invoke it from the directory where this command is present, or you must specify the complete path.
~ Madrid.

HT204384 The SD slot is not reading any of my memory cards, what can I do to fix this?

The SD slot is not reading any of my memory cards, what can I do to fix this?

Resetting your Mac's PRAM and NVRAM

Ad Hoc Query - While executing - System could not read any data

Hello Techies,
When I am excuting my Ad hoc query - for one personnel number for which Infotype 28 subtype 0001 has been maintained
But system is throwing this error -
System could not read any data
Message no. AQ_AD_HOC226
Diagnosis
There is no data available for the specified selections.
System response
The results list in the lower part of the screen still displays the last list to be created.
Please let me know why does it happening ?
Thanks
Jaydeep

It was an date selection issue - as while executing the Ad hoc query - the reporting date is today -
changed to all

Still no fix for superdrive not reading any disc at all?

I've searched through the forum and it seems like there's still no solution for the superdrive not reading any sort disc at all. I have had this imac for almost a month. I rarely have used the superdrive but was trying to play a normal audio cd tonight and upon further investigation found that the drive is not reading any type of disc.
If a disc is loaded, the drive whirs/beeps 4-5 times while trying to read the disc and then ejects it. this happens for dvd movies, audio cds, osx install disc, etc.
I did successfully play and rip some cds a few weeks ago when the imac was first purchased. I have not inserted discs often enough in the past to substantiate that upgrading to 10.4.5 or 10.4.6 affected the drive's performance.
Think I need a new drive or could this be software related?
imac intel core duo 17" Mac OS X (10.4.6)

I want "solved"
You can add me to the list too - I check this page frequently for a reply from an apple representative - to no avail.
My computer is less than 2 years old, purchased brand spankin' new, w/o the warrantee - but hey when you pay that much for your 'puter it should not break down at ANY time during (at least) the first 5 years, unless gross negligence and disregard is involved (which is is not).
I would not categorize myself as being in the 'high usage' category for burning either dvd's or cd's, but here I am less than 2 yrs after purchase w/ a superdrive that can't even read a store-bought cd, and oddly enough the problems I am having DO seem to coincide w/ download of a 'security update.'
Hmmmm......
I would like, at the very least, a helpful suggestion from someone working for Apple - if not an acknowledgement of an actual issue with a faulty (expensive) product.
A guarantee of satisfaction with a purchase should not be wrapped up in purchase of a service plan - good customer service is good policy, and should be provided as a means of standing behind the quality of a product you both sell, and believe in.
There is no good reason why my computer should be broken, and there is no good reason why it shouldn't be fixed - and I see a lot of you have even more reason for complaint than I do. It is irksome in the extreme that this issue seems not to warrant the attention from anyone who can make a difference to our plight.
One would think that a drop-down menu on an official web-site would have a better response rate from affiliated 'professionals' - but we all know the old adage about assuming...
Hey - maybe customer service really is dead - and I might believe that if it weren't for the fact that I respond, personally, to customer e-mails on a daily basis...
Where is our response?
I apologize for the lengthy "blog" - but short and sweet hasn't done the trick..maybe this will?? We can only hope...

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

HP TouchSmart 9100 not reading any wifi...

Similar Messages

Maybe you are looking for