HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1

Hello I have problems with my HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1 surround sound receiver conete SPDIF after update from vista 64 bit to windows 7 began this problem
only nomal audio but no support from the surround sound of 5.1 channel SPDIF what the error may attend
I hope you can help me
Sincerely,
Steve

maybe your spdif default properties, in the supported format tab, options there are configured too high for your revceiver???
is there an error code on your receiver?  if there is an error code check the troubleshooting section in the manual your receiver came with.
you could also try in windows media center, go to the tasks->settings and click windows media center setup->setup your speakers for 5.1 and hit the test button..
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Similar Messages

  • SoundMax Integrated Digital HD Audio for Win 2003 Server x64 bits

    Can anyone give me a link to the audio drivers?
    i can't find them!!
    Thanx
    (mod edit: corrected typo in title)

    lenovo doesn't offer a 64-bit XP/2003 driver for the soundmax card.   the only one available is linked below.   it might be worth trying but it's difficult to say whether or not it will install.   you may have to unpack the executable and manually install the driver.
    http://www-307.ibm.com/pc/support/site.wss/MIGR-67816.html
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • Cant download itunes, because ' there is an error with windows installer package' please help?

    cant download itunes, because ' there is an error with windows installer package' please help?

    I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

  • Protools 8 compatibli​ty with Windows Vista and which proper audio interface?

    O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure  Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing  its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

    Hi again chamille2010,
    Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit.  I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve.  That was also on the XP Operating System so you might be better off with Vista SP1.  I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results.  USB would definitely be slower and might be a cause for latency if you run into it. 
    That's my opinion.  Digidesign has a pretty in-depth site for making sure your system will run Pro Tools.  I'm sure you've already checked it out but just in case:
    http://www.digidesign.com/index.cfm?langid=100&nav​id=54&itemid=23954

  • Solaris 10 x86 5/08 audio driver for SoundMax Integrated Digital Audio

    Hello out there, I recently installed Solaris 10 x86 5/08 on my IBM ThinkPad T60 (2007-63U) and I'm really impressed how well it is working.
    The only thing I've found not working so far is the audio.
    I've installed the Solaris Audio Drivers 1.0 from:
    http://www.sun.com/download/index.jsp?cat=Hardware%20Drivers&tab=3&subcat=Audio%20Devices
    ...but it still is not recognizing the audio device.
    Everything else is working great (thank you Sun and the OpenSolaris Community!!!!!!!), so getting the audio working would be even better.
    Any pointers anyone has on what to look for on the system (e.g. in /var/adm/messages) or how to configure the audio to support the SoundMax Integrated Digital Audio would be greatly appreciated.

    ...well, I've tried building oss-v4.0-build1016-src-cddl but I haven't been able to get it to work.
    In preparation for the build, I did install Sun Studio 12 (from http://developers.sun.com/sunstudio/index.jsp ), patched it, and installed gawk-3.1.6 ( from http://www.sunfreeware.com/indexintel10.html ) and ran configure/make install as instructed which successfully completed.
    The following is what I get when executing ossdetect:
    ================================================================================
    rem_drv osscore
    rem_drv hdaudio
    rem_drv ossusb
    rem_drv sadasupport
    Driver (osscore) not installed.
    unloaded osscommon
    add_drv -m '* 0666 root sys' osscore
    add_drv -m '* 0666 root sys' -i '"pci8086,27d8"' hdaudio
    add_drv -m '* 0666 root sys' -i '"usbif,class1"' ossusb
    devfsadm: driver failed to attach: ossusb
    Warning: Driver (ossusb) successfully added to system but failed to attach
    add_drv -m '* 0666 root sys' sadasupport
    /dev/mixer: No such file or directory
    ================================================================================
    To note, the Solaris 10 x86 5/08 installation I am running on is the full distribution +OEM.
    I also cannot find the "soundon" or "soundoff" scripts referenced in the OSS build instructions.
    Any pointers would be appreciated.

  • Error with Windows 98

    Hello,
    My applets ran very well with Windows 2000 server but, with Windows 98, these applets don't run anymore.
    Here is the error:
    java.lang.IllegalArgumentException at sun.net.www.ParseUtil.decode(Unknown Source)
         at sun.net.www.protocol.file.Handler.openConnection(Unknown Source)
         at sun.plugin.net.protocol.file.Handler.openConnection(Unknown Source)
         at java.net.URL.openConnection(Unknown Source)
         at sun.applet.AppletPanel.getAccessControlContext(Unknown Source)
         at sun.applet.AppletPanel.getClassLoader(Unknown Source)
         at sun.applet.AppletPanel.createAppletThread(Unknown Source)
         at sun.applet.AppletPanel.init(Unknown Source)
         at sun.plugin.AppletViewer.appletInit(Unknown Source)
         at sun.plugin.viewer.LifeCycleManager.initAppletPanel(Unknown Source)
         at sun.plugin.viewer.IExplorerPluginObject$Initer.run(Unknown Source)
    Could you help me ?
    Thank you.

    after having written "java -version":
    java version "1.4.0_02"
    Java(TM) 2 Runtime Environment, Standard Edition
    (build 1.4.0_02-b02)
    Java HotSpot(TM) Client VM (build 1.4.0_02-b02, mixed mode)

  • Error with windows

    I installed windows successfully but when I inserted the leopard installation disc, the following error occurred:
    "Windows Installer Installation Wrapper
    This package requires a newer version of the windows installer. Do you want to update the version of the windows installer on your system?"
    When I clicked yes the following error message occurred:
    "The required resource 'UPDATE' is missing"
    I click OK then the installation stops. I can't see any way around this...
    Can anybody help?
    PS: I posted this earlier but something is really broken with my account and I seem to have two aliases. Sorry!

    Try this -
    When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which minor issues with the BlackBerry device.
    After performing about try downloading the Windows Live Messenger again.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Thanks Tim,
    I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
    At the moment the most recurrent problem is this:
    http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
    which has been longly speculated here:
    http://forum.thinkpads.com/viewtopic.php?t=47755
    My other angst is the boot-time chkdsk hang-up problem:
    http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
    I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
    This is my T61p configuration:
    Intel Core 2 Duo T7700 2.4GHz
    BIOS version 1.26-1.06
    4GB RAM 2 SO-DIMMs
    nVidia Quadro FX 570m with 512MB VRAM
    WUXGA LCD
    Seagate 7200.2 160 GB
    4GB RAM 2 SO-DIMMs
    Windows Vista Ultimate 32bit (waiting to move to 64bit)
    thanks,
    andrea
    Message Edited by abarbieri on 12-05-2007 03:48 PM
    T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
    T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Runtime error with windows 7

    Hi,
    I have a new laptop with Windows 7 and Adobe reader 10 'X' installed. I am unable to open a PDF dopcument. A box shows up titled  Microsoft visual C++ Runtime library and within the box is written 'Runtime Error Program :C... This application has requested the Runtime to terminate in an unusual way.Please contact the applications support team for more information'. I have tried to follow instruction on support for adobe but cannot find the information they are suggesting i change such as preferences etc. Can anybody help me as I do not have a good knowledge of computers and nobody to ask....

    Try the following and check if you could launch reader or not?
    1. Right click on Reader icon and choose Properties...
    2. Goto Compatibility tab and check 'Run this program in compatibility mode for'
    3. Click OK
    4. Double click on Reader icon and choose 'Open with protected mode disabled' and click OK.

  • Error with Windows NT?

    Hi,
    i just installed the JMF Performance Pack for Windows.
    When auto detecting Capture Devices, i recieve (german) 'Ordnungsfehler 6' in dsound.dll. What does this error mean? (Fehler=error)
    thanks in advance,
    JCheckBox

    Hi,
    i found the error described in another context on another site, windows nt does not support directx5, therefore the windows performance pack cannot be used with windows nt?!
    does the cross platform package solve this problem?
    regards,
    JCheckBox

  • Network Error with Windows 7

    Hi,
    Has anyone come across following error?
    I had a ThinkPad X201 with Windows 7 get this error after it has been updated with Windows Patches. Was fine before the patches.
    Also found error when trying with Net Use command.
    Regards

    Hello,
    I am guessing there was a network share listed in the screen image that was edited out, correct?
    First, try running the FixIt program from Microsoft Knowledgebase Article #910336, "You receive a "0x80070002" or "0x80070003" error code after you download an update from Windows Upda...". 
    If that does not solve the problem, try deleting the network share on the computer, then recreating it using 'Advanced Sharing'.  Does that make any difference?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Microsoft Outlook 2007 send/receive error with windows 8.1

    I do have an IDEAPAD LENOVO with windows 8.1
    Today, i made some updates to my laptop/tablet, and i have problems with the send/receive error on my Microsoft Outlook 2007, before that it was working fine.
    Someone in the community know how I can fix it.
    Thank you,
    Moky

    Hi,
    What's the error message content you got? Please provide us more information about this problem so that we can resolve it more efficiently.
    Meanwhile, please refer to the following KB article and follow the steps to troubleshoot the issue:
    http://support.microsoft.com/kb/813514/en-us
    Hope it helps.
    Regards,
    Steve Fan
    TechNet Community Support

  • D3dx9_42.dll error with windows 8.1

    Hi 
    I just got my new pc with windows 8.1 and when I try to play games (In this case with Civ 5) I get a 
    d3dx9_42.dll error, 
    I have read that you can fix this by installing the latest DirectX drivers but windows 8.1 install DirectX with windows update so I cant find a download for 64 bit windows 8.1. 
    Please help

    Any idea on the following dump? I am getting a BSOD every 30 minutes or so. I am running Windows 8.1 on an HP machine.
    Log Name:      System
    Source:        Microsoft-Windows-WER-SystemErrorReporting
    Date:          2/13/2014 8:28:29 PM
    Event ID:      1001
    Task Category: None
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      CRL
    Description:
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x00000109 (0xa3a01f58a0b665ab, 0xb3b72bdef3359b5e, 0xffffe0000110d0d0, 0x000000000000001c). A dump was saved in: C:\WINDOWS\MEMORY.DMP. Report Id: 021314-12921-01.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
        <EventID Qualifiers="16384">1001</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-02-14T00:28:29.000000000Z" />
        <EventRecordID>24048</EventRecordID>
        <Correlation />
        <Execution ProcessID="0" ThreadID="0" />
        <Channel>System</Channel>
        <Computer>CRL</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">0x00000109 (0xa3a01f58a0b665ab, 0xb3b72bdef3359b5e, 0xffffe0000110d0d0, 0x000000000000001c)</Data>
        <Data Name="param2">C:\WINDOWS\MEMORY.DMP</Data>
        <Data Name="param3">021314-12921-01</Data>
      </EventData>
    </Event>

  • Officejet G85xi printer errors with Windows office 8

    I recently purchased a new PC with Windows 8.  I downloaded the most current drivers for my Officejet G85xi.  Each time  I try to print I get one or two good pages and then the printer stops and an error pops up in the control menu.

    I used the G85xi without issues (other than paper supply out) using Window XP on older PC.  The printer has not worked properly since it has been connected to HP Envy 700-074 running Windows 8.1.  When I am lucky I get 2 full pages of print before "print error" appears.  I have tried Printer Doctor, deleting the printer and re-adding it, set higher priority, checking USB 2.0 port connetion, etc.  It usually will finish a text document not much more than a single page, but PDF documents are very limited.  I have spent hours trying to print one 9-page PDF document.  Should I ditch what was a wonderful printer?  Should I ditch a new HP PC with Windows 8.1?   Even if I buy a new printer, can I trust it will not stop printing on page 2 or 3 in the middle of the page?

Maybe you are looking for

  • Field T_STCD1 does not exist in form this erroe msg coming in smartform

    hi, in my smartform, if i give one set of input like, 1st qtr of 2008, vendor and compcode, its displaying the value. but if i give the input like 1st qtr of 2007, vendor and some other compcode its giving some error like field T_STCD1 does not exist

  • Print Paper Size Problem after Mavericks Upgrade

    I migrated my Apps, Data and System Settings from a Macbook running OSX Lion to a new Macbook Pro running Mavericks. The problem I now have is that the application 'Family Tree Maker 2' cannot get the paper size right. No matter which Paper size I se

  • Tables nad fields for blocked invoices

    hi, what r the tables and fields which r required to develop a report that displays blocked invoices. thanka kishore

  • Year to Date reports using Prompts

    Hi. I'm trying to build a report that will show results of sales compared to Annual targets. All those fields are fields directly at the opportunity level (amount and targets). I also need to put a prompt to select dates from and to, for the Opportun

  • FICO overveiw docs for ABAP consultants

    hi can any one send me FICO overview documents, which are very help for ABAP consultants. if any one will send it , i will get a great help from ur side, because i am new to the FICO, and iam not the finance background, so iam facing lot of problems