HP Trap Monitor taking a lot of resources

I have a color laserjet 1312nfi. I looked at my activity monitor and noticed "Trap Monitor" taking about 350mb of memory. I killed it, launched some hp programs and printed again, but it hasn't come back. Does anyone know what Trap Monitor is and what I can do to prevent it from coming back in the future?

Hello the:
Direct answer to both of your questions - no. However, unless you are having some sort of performance problem, why do you care? You did not indicate why you were looking at the activity monitor (which should be, IMHO, used only when there is some sort of performance issue).
Barry

Similar Messages

Mail consumes a lot of resources making the os unusable

I'm having a weird problem with Apple Mail: After launching, the program rapidly starts taking a lot of the system resources making it impossible to run any other program.
CPU utilization is very high, the Mail process takes around 2.5 Gb of RAM (real memory) and over 20 Gb of virtual memory.
The only thing Mail appears to be doing is updating it's cache.
What could be wrong? Besides using another mail client, what are my options?
Thanks.

Hi eroussel,
I'd suggest to try the following for starters:
When launching Mail.app, try opening the mail activity monitor by going to Window --> Activity, or command-0. It should show you some detailed information on if anything is happening in the background in regards to talking to your mail server, smtp server, etc.
As Linc Davis said, try booting in Safe Mode and see if the same thing happens.
If the same thing happens in Safe Mode, try deleting the mail account (assuming you only have one) and re-create it again using the settings from your mail provider. Be sure to backup your computer first!!
While doing all of this, leave the Activity monitor up from both Mail.app and the Mac OS X system Activity Monitor.
Hope this helps point you in the right direction.

When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor. How do I fix these?

When I turn on my computer I get the following error messages:
Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
How do I fix these?

Library/LaunchAgents: com.promethean.activmgr.plist
Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
These are the system extension errors
"/System/Library/Extensions/AppleGraphicsControl.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
"/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
"/System/Library/Extensions/BJUSBLoad.kext"
"/System/Library/Extensions/EPSONUSBPrintClass.kext"
I do not know what any of these do or how to fix them. I have run multiple disk permission repairs & disk repairs. The startup & system extension errors continue to come up.
I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

Background task taking a lot of time to execute

Hi,
There is a background task in my workflow which is taking a lot of time to execute.
I have tested it in dialog mode.. and it works fine.. takes just 2 mins.
Only when the task is executed from background.. it takes about 10 mins.
Is this a config problem? How do I check if it is so?

you could try activating a trace (sql) and see what the differences are,.
you could check if maybe user parameters are influencing this. Or ask your basis team if there are a lot of differences between syystem users and dialog users in terms of resource allocation.
Did you find anything different whilst debugging it?
Kind regards, Rob Dielemans

Generic Extraction : Taking a lot of time

HI Experts
I have created ZKONV a generic extracter which is a copy of KONV table. It has around 16,00,000 records .When I´m pulling the data in to ODS it is taking a lot of time. it is taking around 5+ hours to load the data. Is there anything wrong with my Datasource why it is taking so much of time.
Kindly provide some inputs
Thanks
NLN

Hi Lakshminarayana
You got to check couple of things.
First goto the source system and see, how long the extract program is running. The long time may be due to poor source system performance or huge processing at the BW system side. If the job in the source system is running for a long time, then check the source system resource. Build proper index on the mentioned table and see whether it has improved the performance. You can ask the basis people for the SQL trace and they let u know what kindof indexes u can build on the tables.
If the processing is taking more time, then u have to imrpove the start/update routine in the BW side. Please let us know, where exactly u have the problem. Then we can think of resolving it.
Sriram

How do I get my music onto icloud from my ipad? I can see i have plenty of icloud storage but can't get my music to store on icloud hence taking up lots of storage on my ipad

How do I get my music onto icloud from my ipad? I can see i have plenty of icloud storage but can't get my music to store on icloud hence taking up lots of storage on my ipad

If you want to be able to access your entire music library from iCloud, you'll have to subscribe to iTunes Match (http://www.apple.com/itunes/itunes-match/). Music purchased from the iTunes store is already in iCloud as it can be redownloaded at any time (see http://support.apple.com/kb/ht2519).

Creating SNMP Trap Monitors in 2012 R2

Hello,
For the past week or so I have been attempting to create a MP for my company's UPSs to be monitored in SCOM 2012 R2. I have created a custom MP with custom datasources and objects. All seems to go according to the plan until I attempt to create a SNMP
Trap monitor for those objects. I am able to verify that the device is discovered and is sending the traps successfully with a view. The problem seems to lie within the setup of the monitor. I have followed the steps as much as I can from this page http://technet.microsoft.com/en-us/library/hh563870.aspx
to create a monitor that will be triggered by an incoming trap saying the UPS is on Battery Power.
This is the initial or trigger event information received by SCOM:
<EventData>
<DataItem type="System.SnmpData" time="2014-07-03T08:48:07.6990732-07:00" sourceHealthServiceId="26DF02E5-DEA0-BED0-443B-3605A05D4790">
<Source>10.51.85.40</Source>
<Destination>127.0.0.1</Destination>
<ErrorCode>1</ErrorCode>
<Version>1</Version>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.3.0</OID>
<Syntax>67</Syntax>
<Value VariantType="19">17567220</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.6.3.1.1.4.1.0</OID>
<Syntax>6</Syntax>
<Value VariantType="8">.1.3.6.1.4.1.318.0.5</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.318.2.3.3.0</OID>
<Syntax>4</Syntax>
<Value VariantType="8">UPS: On battery power in response to an input power problem.</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.6.3.1.1.4.3.0</OID>
<Syntax>6</Syntax>
<Value VariantType="8">.1.3.6.1.4.1.318</Value>
</SnmpVarBind>
</SnmpVarBinds>
</DataItem>
</EventData>
This is the event should signal that everything is operating normally once again.
<EventData>
<DataItem type="System.SnmpData" time="2014-07-03T08:48:12.9133769-07:00" sourceHealthServiceId="26DF02E5-DEA0-BED0-443B-3605A05D4790"><Source>10.51.85.40</Source>
<Destination>127.0.0.1</Destination>
<ErrorCode>1</ErrorCode>
<Version>1</Version>
<SnmpVarBinds>
<SnmpVarBind>
<OID>.1.3.6.1.2.1.1.3.0</OID>
<Syntax>67</Syntax>
<Value VariantType="19">17567730</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.6.3.1.1.4.1.0</OID>
<Syntax>6</Syntax>
<Value VariantType="8">.1.3.6.1.4.1.318.0.9</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.4.1.318.2.3.3.0</OID>
<Syntax>4</Syntax>
<Value VariantType="8">UPS: No longer on battery power.</Value>
</SnmpVarBind>
<SnmpVarBind>
<OID>.1.3.6.1.6.3.1.1.4.3.0</OID>
<Syntax>6</Syntax>
<Value VariantType="8">.1.3.6.1.4.1.318</Value>
</SnmpVarBind>
</SnmpVarBinds>
</DataItem>
</EventData>
You may notice that these traps are being sent as SNMP v1. I am unable to change that on the UPS so i have modified the monitors to account for that. Here is the code for the monitor:
<UnitMonitor ID="UIGeneratedMonitorc2c65f3c85fe42f48ce8d2580c57bbae" Accessibility="Public" Enabled="true" Target="APC.MP.UPS" ParentMonitorID="Health!System.Health.AvailabilityState" Remotable="true" Priority="Normal" TypeID="SNL!System.NetworkManagement.SnmpTrapProvider.2SingleEvent2StateMonitorType" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="UIGeneratedMonitorc2c65f3c85fe42f48ce8d2580c57bbae_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Error</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UIGeneratedOpStateId2750c1ab2cd14b4a8a8e9f4633eba0b0" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="UIGeneratedOpStateId5753748399984d08953c1a46895df99c" MonitorTypeStateID="FirstEventRaised" HealthState="Warning" />
</OperationalStates>
<Configuration>
<FirstIP>$Target/Property[Type="SNL!System.NetworkManagement.Node"]/SNMPAddress$</FirstIP>
<FirstVersion>1</FirstVersion>
<FirstOIDProps>
<OIDProp>.1.3.6.1.4.1.318</OIDProp>
</FirstOIDProps>
<FirstExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.6.3.1.1.4.1.0"]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">.1.3.6.1.4.1.318.0.5</Value>
</ValueExpression>
</SimpleExpression>
</FirstExpression>
<SecondIP>$Target/Property[Type="SNL!System.NetworkManagement.Node"]/SNMPAddress$</SecondIP>
<SecondVersion>1</SecondVersion>
<SecondOIDProps>
<OIDProp>.1.3.6.1.4.1.318</OIDProp>
</SecondOIDProps>
<SecondExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.6.3.1.1.4.1.0"]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">.1.3.6.1.4.1.318.0.9</Value>
</ValueExpression>
</SimpleExpression>
</SecondExpression>
</Configuration>
</UnitMonitor>
I tried the following things while attempting to troubleshoot this issue:
Leaving First
SnmpTrapProvider and Second
SnmpTrapProvider blank while creating the monitor.
Adding "" and also '' around the value as it is a string and perhaps that was the cause.
Changing the First and Second SNMPTrapProvider to .1.3.6.1.6.3.1.1.4.1.0 since that is the specific OID I am looking for the value of.
Reading every page of the internet and bashing my head on the keyboard.
I am guessing that the issue will reside in the the monitor creation and definition, but I have not found anything that clearly describes how to fill out the SNMP Trap Monitor wizard given the trap info. Especially since the trap I am receiving does
not seem to contain the usual OID with a common Int or string value. Hopefully someone can provide assistance as I am nearing my wits end with this problem.

Firstly, thank you Michael Skov, knowing that the First and Second SnmpTrapProvider or <FirstOIDProps> in the xml, needed to be blank got me pointed in the right direction. I figured I would come back and share my final working code snippet in case
others run across a similar issue.
<UnitMonitor ID="UIGeneratedMonitorf9f671e5456c44fd807d6ec2bd09621d" Accessibility="Public" Enabled="true" Target="Disc!APC.Disc.UPS" ParentMonitorID="Health!System.Health.PerformanceState" Remotable="true" Priority="Normal" TypeID="NetworkManagement!System.NetworkManagement.SnmpTrapProvider.2SingleEvent2StateMonitorType" ConfirmDelivery="false">
<Category>Custom</Category>
<AlertSettings AlertMessage="UIGeneratedMonitorf9f671e5456c44fd807d6ec2bd09621d_AlertMessageResourceID">
<AlertOnState>Warning</AlertOnState>
<AutoResolve>true</AutoResolve>
<AlertPriority>Normal</AlertPriority>
<AlertSeverity>Warning</AlertSeverity>
</AlertSettings>
<OperationalStates>
<OperationalState ID="UIGeneratedOpStateId8700c95344254f87a60c92d30d4a3953" MonitorTypeStateID="SecondEventRaised" HealthState="Success" />
<OperationalState ID="UIGeneratedOpStateId7bf68c6cfe3d4faabe83e630781c7327" MonitorTypeStateID="FirstEventRaised" HealthState="Warning" />
</OperationalStates>
<Configuration>
<FirstIP>$Target/Property[Type="NetworkManagement!System.NetworkManagement.Node"]/SNMPAddress$</FirstIP>
<FirstVersion>1</FirstVersion>
<FirstOIDProps />
<FirstExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.6.3.1.1.4.1.0"]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">.1.3.6.1.4.1.318.0.5</Value>
</ValueExpression>
</SimpleExpression>
</FirstExpression>
<SecondIP>$Target/Property[Type="NetworkManagement!System.NetworkManagement.Node"]/SNMPAddress$</SecondIP>
<SecondVersion>1</SecondVersion>
<SecondOIDProps />
<SecondExpression>
<SimpleExpression>
<ValueExpression>
<XPathQuery Type="String">SnmpVarBinds/SnmpVarBind[OID=".1.3.6.1.6.3.1.1.4.1.0"]/Value</XPathQuery>
</ValueExpression>
<Operator>Equal</Operator>
<ValueExpression>
<Value Type="String">.1.3.6.1.4.1.318.0.9</Value>
</ValueExpression>
</SimpleExpression>
</SecondExpression>
</Configuration>
</UnitMonitor>

Report RSXMB_RESTART_MESSAGES needs a lot of resources

Hi,
we are using PI 7, SPS9.
When we have a heavy load in XI, we are getting sometimes JavaNullPointer-Exceptions in Java-mappings, so we have to restart these messages - no problem!
There is the report RSXMB_RESTART_MESSAGES to restart failed messages, but when I defined it as a job (every 1 hr) and during this time we have a lot of messages (but only some are failed), the job never ends and it needs a lot of resources!
In the queues I can see a lot of entries made by the report.
Our report still have the field "max restarts" and I entered 5 restarts!
What can I do?
Thanks a lot!
regards
Wolfgang Hummel

Hi Sandro,
thanx for your answer.
This is a test system and at the moment I just defined jobs for deleting and not for archiving.
My problem is, that we have a sender with thousands of messages via the same interface for the same receiver and sometimes a message failed ('cause of NullPointerException in java mapping).
To define a filter in the report RSXMB_RESTART_MESSAGES is no solution 'cause the filter cannot reduce the number of messages (it's always thousands of messages).
When the job starts during less traffic, I don't have any problems - it's just a problem during heavy traffic.
regards
wolfgang

HP Trap Monitor

What is HP Trap Monitor and do I need it? I have an Officejet 6500A and a Pro 8000, both on a wired network (The 6500a is wired only, the 8000 is wireless but I couldn't get it configured so just plugged it in). All Macs on the network (2) are running OS 10.6.8 with current drivers.
When I restart my MacBook Pro it tells me HP Trap Monitor does not have proper security settings to run.
Can I just delete it or move it out of the "Startup Items" folder?
Thanks
This question was solved.
View Solution.

Hi, please try the following:
Click the Go menu and then click Computer,
open Library > Startup Items
Right click (CTRL+Left from your Mac keyboard) the HP IO folder and click Get Info
Under Sharing & Permissions the following:
System = Read & Right
Wheel = Read Only
Everyone = Read Only
Click the Gear icon and choose to Apply to all enclosed items and approve.
Reboot your Mac and check if the message has gone now.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Trap monitor?

I finally decided to install Leopard (successfully enough that I'm posting this from the computer I just installed it on), and got the error "Trap monitor unexpectedly quit" when the installation was done. I had walked away while it was installing, so don't know if anything else led up to this, but it kept reappearing after I clicked "relaunch" and only went away when I told it to ignore it. So, three related questions:
1) What IS a Trap monitor?
2) Is it something important, or just an accessory I can safely function without?
3) If it's important, how do I fix whatever it is that's crashing? (Or...If it's not important, can I just trash it so I stop getting this error, and where do I find it?)
I'll hold off on setting up Time Machine until I know if this is something that's going to require another installation so I don't lose my backup of my old files on the external drive. Hopefully this is something minor (keeping fingers crossed!)

First rule for using these forums is to search them. A search for *trap monitor* brings up http://discussions.apple.com/thread.jspa?messageID=5817251

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Everytime I start up my MacBook Pro, I get this message. 'Insecure Startup Disabled.' "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

Update your HP Printer drivers/software at their website or uninstall using the developers method.

Simple select query is taking a lot of time

hi gems...
my table has 7267563 rows...and i am doing a simple select * from table;
but it is taking a lot of time nearly 25minutes but not completed...
when i did select count(1) from table then it gave the result instantly also select * from table where rownum < 10 is also fine...even when i am selecting all the records using rownum i.e. select * from table where rownum < 7267563 is also giving result instantly...
but the entire table is not getting result i.e. select * from table...also there is no lock in the table(though i know that select is nothing to do with lock)..
what may be the issue..please suggest...thanks in advance...
Edited by: user12780416 on Dec 12, 2011 11:08 PM

Hi;
Please see below thread
query takes too long ...
help in solving long run query
HOW TO: Post a SQL statement tuning request - template posting
Hope it helps
Regard
Helios

Startup taking a LOT of Time

Hi All,
We have our application on Weblogic Server 8.1 SP5 and its taking a lot of time while starting up.
What I found that these lines are the ones which are taking up majority of the time.
Kindly Suggest how we can improve on this.
####<Jun 15, 2009 4:14:59 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module uddi of application uddi successfully transitioned from unprepared to prepared on server cgServer.>
This line took more than 2 min.
####<Jun 15, 2009 4:16:50 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module MLAppCoreWL610.jar of application IntellectMM successfully transitioned from unprepared to prepared on server cgServer.>
####<Jun 15, 2009 4:18:23 PM GMT+05:30> <Info> <Deployer> <sunbom4> <cgServer> <main> <<WLS Kernel>> <> <BEA-149060> <Module OpenFXWrapperEJB.jar of application IntellectMM successfully transitioned from unprepared to prepared on server cgServer.>
The above 2 lines are taking 1.5min each.

I suggest that you take some thread dumps 10-15 secs apart during the time it's slow. The log timing alone won't tell you where the threads are spending time.

Mac taking a lot more time

My Mac is taking a lot more time to load photos from iPhone and iPad than was taking before.What can be the reason of it ?
Thanks

DO NOT INSTALL MACKEEPER or any other so called 'cleaning ' application. Please read the following user tip:
https://discussions.apple.com/docs/DOC-3036
Look for reasons in this user tip for your issues of slow operation:
https://discussions.apple.com/docs/DOC-3521
Ciao.

Select Command taking a lot of time to execute

Dear Experts,
My below SELECT command taking a lot of time to execute.
      SELECT wid
                   matl_desc
                   INTO TABLE open_wid FROM zwb_table
                   WHERE ( weight2 = 0 OR weight2 IS NULL ).
Table : zwb_table contains around 7 Lacs records. That's why taking a lot of time . I have also Indexed the table zwb_table with field WID & WEIGHT2 . (zwb_table contains only WID as Primary Key Field)
Structure of Internal Table : open_wid ->
                                         wid LIKE zwb_table-wid,
                                         matl_desc LIKE zwb_table-matl_desc,
Please suggest me how to Improve the Performance of the above Select command.
Thanks in Advance
JACK

Hi Jack,
you are having morethan 7lack records in z table. it is not good practice fetching all the records into internal table and restricting with where clause in loop statement.
I hope you already created secondary index combination of primary key.
check you select query fetching records based on index you have created in ST05.
Refer below link for your program is using index that you have created.
Re: Indexing
Regards,
Peranandam
Edited by: peranandam chinnathambi on Apr 7, 2009 8:38 AM

HP Trap Monitor taking a lot of resources

Similar Messages

Maybe you are looking for