Hp vivienne tam mini laptop noise problem

      I've bought an hp vivienne tam laptop edition last Feb. 28,2010 but there was a intermittentent noise at the right side portion near the hp mobile drive or in the security cable connector section. I think it's the hard disk thats making a noise. I've check the bios to see what kind of brand is the hard disk of hp vivienne tam edition made-up, then I've found out that the brand is samsung. 
       Is this noise is normal? And I want to know if hp is using a samsung brand hard disk in hp vivienne tam laptop because if not may be the hard disk was altered by some technician in the store, In were I bought this hp mini laptop. Pls reply to my email asap ...

Hi,
Unfortunaterly HP does not supply link for download, you have 2 options:
(a) Order a set from HP (can be USB), the whole set (OS, drivers, utilities) will cost around $30 for P&H,
(b) Download Windows from Microsoft the use the key on machine to re-install Windows, you have to find drivers later.
For option a:
  http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07143
For option b, place to download Windows:
  http://www.microsoftstore.com/store/msusa/html/pbPage.Help_Win7_usbdvd_dwnTool
and for drivers:
   http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=4157998
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Lightroom doesn't recognize mine camera Nikon  D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

    Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
    Ronald ( the Netherlands)

    Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

  • DOS BIOS flash for MP Miini 1000, Vivienne Tam (HP Mini 1020TU) ?

    Hi,
    I have a gorgeous Vivienne Tam HP Mini 1000 (Mini 1020TU) that will not boot windows. I can access the BIOS settings and I can boot to a DOS USB stick.
    So the normal BIOS flash is out of my reach. I need to do it from DOS. Yet though HP gives the instructions on how to do this, it doesn't seem to offer the actual ROM file or its loader.
    Is there any way out of this dilemma?
    Thanks,
    Paul

    Hello @paul1149,
    I have read your post on how you are looking to flash the BIOS on your notebook computer, and I would be happy to assist you in this matter!
    Based on the information you have provided in your post, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards  
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Vivienne Tam wireless Mouse does not work.

    My wife's Vivienne Tam wireless Mouse for HP Mini 210-1032VU does not work anymore, but the light at the scroll wheel keep flashing/flickering.
    We tried changing the battery, but that did not help.
    Any suggestions what the problem might be?  The mouse is still under warranty.
    Any help is very much appreciated.

    i have a disease in both hands. It causes a boney like process to grow in the palms of my hands causing my hands to draw up like a claw. Repeated operations for the rest of my life are happening. It is more and more difficult for me to hold a mouse of any kind.
    So the vivienne  tam mouse  has a smaller rise. The microsoft a high rise mound that hits the nerves causing intense pain. The pain makes me break out into a sweat. Where can I find the correct vivienne tam driver? It used to be online. I understand vivienne tam hp driver was taken off the site. it got lost on my computer when the computer crashed. What can I do? how do I get that unique driver back. I alread  wrote hp and microsoft online and no help. the driver is specific to the tam. I wonder how many other people have pain with this disease process. The logtech also has a high rise hill in the palm as well. Help anyone

  • How do i install the drivers for an hp officejet 4500 G510n-z to my hp mini laptop

    Installing a printer to my HP mini laptop windows 7.

    Hi,
    What exact operating system do you have on your laptop?
    If you use a Windows XP, Vista or 7 Starter edition, only basic drivers are available and only a USB connection is supported by the operating system, A Windows Starter edition do not allow enough processes to run and communicate with a printer through the network. if you use any standard edition of Windows the full software will be installed.
    The drivers below are intended for Windows XP, Vista or 7 (assuming it cover your operating system?):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80348-1&cc=us&dlc=en&lc=en&...
    If that does not meet your needs be sure to provide some more details as the operating ssytem version, required connection type, etc.
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Pls Help me with my hp mini laptop

    Pls Help me with  my hp mini laptop
    system disabled
    [69005685]
    This question was solved.
    View Solution.

    Hi,
    Try entering:     76963201
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can the deskjet 3940 be used with a dell inspiron mini laptop which has no cd compartment?

    Hello ?
    Really keen to purchase Deskjet but at moment only have the laptop named above to use with it.Is this possible as the set up CD does not go in it as no CD compartment ?

    Hi - Try following the steps in the doc at this link.  Once you follow the link, click on:
    Install the Driver Using Windows Update with a USB Connection (Downloadable Driver Not Available) ►
    The printer driver should already be in Win7 (I don't believe it will be any different for the mini laptop). 
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Please reset my bios password for me on hp mini laptop

    someone enter a bios password on my hp mini laptop computer but i have no idea can someone help please error code is 2mc9142yp2
    This question was solved.
    View Solution.

    Hi,
    Try entering:    74eo3v7i27
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • 6120c speaker noise problem

    I have puchased Nokia 6120c a month before. It work fine up to my requirement and expectation.
    Since last some days, it created noise in the front size speaker and sometimes mutes while listening to some caller. But when I make the volume down, it works fine.
    I will be grateful if you please guide me how can be get rid of this inconvenience of speaker noise problem, and suggest me the solution.

    Which HD do you have?
    1. There is a constant noise from it and by
    monitoring the fan sensors it have concluded that
    they are not to blame. Altough it sounds like a fan
    that is constantly on because it sounds like air
    flowing inside the computer. As far as i can tell the
    noise seems to be most apparent under the trackpad.
    This noise is on from the moment i turn on the
    machine until i shut.
    It might just be the sound of the hard drive spinning. They don't appear to ever spin down. Especially the 7200 one like I have.
    2. I belive or am imagining to my self that the
    harddrive is becoming louder when writing/reading
    activity.
    It not just your imagination runnin away with you. On occasions mine makes some clicks, etc. when reading or writing.
    So from these two issues i tought it migh have been
    the harddrive that had some fault on it, but i cant
    seem to find any, the S.M.A.R.T. status is verified
    and there is never any sounds which might suggest bad
    sectors on it.
    I think it just may be "normal" for these drives.
    3. Every 2-3 secconds there is a faint noise from the
    PowerBook and i belive that this might have something
    to do with the Power as when it is not pluged into
    the mains there is no sound. It sounds like a very
    quite heartbeat monitor.
    No clue what that is.

  • My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    My iPod touch isn't being recognized by my pc. The lock button on it won't work due to water damage, and a friend of mine fixed the problem by restoring it on his computer. How do I restore it without the lock button?

    first try:
    iOS: Device not recognized in iTunes for Windows
    next
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • My Desktop pc & mobile not play any video and in my laptop no problem

    i'm using 30 version of firefox in my Laptop, Desktop & Mobile also but in my Desktop pc & mobile i'm unable to play any video and in my laptop no problem.
    So if the prob. in my network so it will be not possible.
    i think like earlier some time ago flashgot will stop working in firefox now this same mistake is accures again for video.
    N yes i've updated my flash player, shockwave, java etc...

    With the last Firefox upgrade, some plugins are no longer
    enabled until you enable it.
    Open the Add-ons Manager by
    Pressing the '''Alt''' or '''F10''' key to bring up the tool bar.
    Followed by; '''Tools > Add-ons.'''
    Hot key; '''<Control> ''(Mac: <Command>)'' <Shift> A)'''
    On the left side of the page, select Plugins.
    BTW; At the top right is a link to check your plugins.

  • Strange noise problem with music layer after replacing the music file using script in CS6

    Hey guys,
    I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
    Does anyone know what's going on here?
    I'm using After Effects CS6 windows Server 2008 64bit.
    Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hi Myleniu,
    Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
    I'm starting to think that win server might be the problem.

  • 2014 mac mini dual monitor problem

    I just brought a mac mini (Late 2014) i have two displays monitors connected, one HDMI to DVI. and one thunderbolt to DVI. I can have both thunderbolts connected and the problem its the same, when back from sleep ,one monitor doesn't turn on. i have to disconnect one and then both work, it only happens when the mac goes to sleep. on cold restart or turning the mac on, this problem doesn't occur. any help.

    I have this same problem too. I purchased the Mac Mini with the intention of running dual monitors. I'm using the HDMI and mini-display/Thunderbolt to DVI. I've also tried MiniDisplay/Thunderbolt to HDMI and I'm experiencing the same problem as angelfromfullerton. Whenever it tries to wake from sleep, it can't decide on monitor arrangement and keeps flicking between the two, making the OS unusable and forcing a reboot... EVERY TIME. I've also experienced the issue once or twice on a cold boot. It doesn't matter which Thunderbolt port is used either.
    I'm going to have to return my Mac Mini unless this problem is fixed asap.
    Mac Min, OSX Yosemite (10.10).

  • Mac Mini with Major Problems

    I'll try to make this short, but it is a looonngg problem.
    About one month ago my Mac Mini began having problems when I boot up.  The computer would freeze on the opening page where I put in my password.  My wireless keyboard and trackpad would not work.  This would be interminent at first but progressively got worse.
    I spent hours on phone tech support.  Finally realizing that would not help I drove the 100 mile round trip to the local Apple store for a Genius bar appointment.
    The first appointment (there have been 5 - meaning 500 miles) resulted in them doing a clean install of Lion.  I took the computer back to the office and guess what, the same problem.
    I drove back to the Apple store, the Genius did some more work and proclaimed it fixed.  It was, for about 3 days when everything started again.
    More time now on tech support.  One more trip to the Apple store.
    This time they kept the Mac Mini for about 4 days are replaced the logic/mother board. 
    I got it back to the office on Thursday. Everthing works great.
    Until today.  I boot the computer, it gets to the screen that has the apple on it - then nothing.
    I manually power it down and reboot.  Same thing.
    I've set up ANOTHER appointment at the Genius bar tomorrow. 
    My question: can I demand that they replace this machine.  Between work and home I have 2 Mac Mini's, a Macbook Pro, a Macbook Air and 2 iPhones.  I've never had this type of problem.  I'm really tired of this.
    I purchased this in February so it is in warranty. 
    Thanks

    rwgleaves wrote:
    I took it to the Apple store Genius bar today - my 5th trip - and they did just what I'd hoped.  They replaced the Mac Mini with a brand new machine. 
    This is why I buy Mac/Apple!
    Excellent new, sorry you had so much trouble on the way. And yes, Apple Stores are awesome!

  • G4 mini has a problem with its volume structure

    My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
    Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.

    I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
    To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
    1) Insert the Install disc and the shutdown the Mini.
    2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
    3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
    4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel.

Maybe you are looking for

  • Internet radio from Apple TV suddenly not working!!! Please help!

    I used to be able to put internet radio stations in a playlist and sync to ATV, and they would show up on the ATV and I could select and listen to them! From what I've read on some other forums, after version 2.02 came out, you could even do that and

  • A peculiar problem using jsp:include conditionally

    Hi, This is regarding usage of jsp:include in Myfaces 1.1.4. lets say the page containing the jsp:include statements as PARENT PAGE I have a requirement to display some components in the PARENT PAGE which are continued from the same form using differ

  • XI IDOC Master Data Synch with Change Pointer (GLMAST)

    Hi, I have scenario to create integration between 2 SAP system with XI 7.0 using IDOC - GLMAST. I already acitvate Change Pointer Globally (BD61) and Activate Change Pointer for GLMAST (BD50). The problem is whenever changes have done in system 1, 2

  • SA not transfering to SRM

    Hi, Ours is MM-XI-SUS scenario. We have succesfully sent Purchase Orders and Scheduling Agreements to the production SRM system. However, while sending the Delivery Lines, we are facing an error. Now this error is also coming up in Development. We ha

  • Howto. stacked canvas as splash screen

    hello all users of forms world! problem: how to display a splash screen with a text inside when a process is launched in a canvas full of iteration etc... solution: assume we have a content canvas C playing the role of a data processor, items browser