HP W1707 Monitor

Hi i need HP W1707 Monitor can pl help me...thank you
This question was solved.
View Solution.

Hi,
This monitor HP W1707 is not listed in HP shoppoing website. And this is available as only Used in thirdparty websites like amazon or ebay.
http://www.ebay.ca/ctg/HP-W1707-17-Widescreen-LCD-Monitor-/66580930
http://www.amazon.com/HP-W1707-17-inch-LCD-Monitor/dp/B00170KSWM
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Similar Messages

How can I connect HDTV and LCD monitor to PC using both -as a double monitor.

I recently purchased HP Pavilion PC a6600f with HP w1707 monitor. I also purchased a DVI to HDMI cable to hook PC to Samsung HDTV. I can use the VGA cable to hook to the monitor and the DVI to HDMI cable to hook to the HDTV but have to unplug one to use the other. Is there any way to configure Windows Vista Home Premium to show on both screens at same time or at least be able to switch between the two without having to unplug one and restart computer?
This question was solved.
View Solution.

I believe you have to press Source or the Mode button to switch between video inputs on your monitor.

NO AUDIO - HP w1707 LDC 17" Monitor... Help please?

I recently bought a HP w1707 LCD 17" monitor second hand. Didn't realize until I got home that it had speakers installed in it. I unplugged my desktop speakers and plugged in the sound wire to the green jack in the rear of my tower. No sound. Plugged it into the front jack. No sound. Went in and adjusted the settings from desktop speakers to monitor speakers. No sound. I swapped out the sound wires (black wire with green plug/jacks on ens). No Sound. Checked the sound settings on the monitor, my computer, and even went to trouble shooting. I did what the trouble shooting said, and I also wound up downloading three things from the HP website to use my monitor. Still no sound. My other speakers work fine. My mic and headphones jack work fine. Desktop speakers work fine whether they're plugged into the rear jack or the front jack. This leads me to conclude that there's something wrong with my monitor.
Can someone tell me what is wrong or what i didn't do? I don't mind using my desktop speakers, but all and all I would like to know at least what's wrong with my monitor.
Sincerely conflused,
-Shal-
~~Abnormality is my Normalcy~~

Hmmmm, if you connected the a cable that had a (green) mini-stereo connector on both ends - one into the PC audio out (green) and one in the monitor's audio-in, then it should work.
Other things to look at would be to make sure "Speakers" is set as the default audio output device in Windows Sound Properties (from Control Panel).
Also... make sure the volume is up from the monitor OSD menu (I know you said you were in there, but just making sure you actually see the volume bar go from left to right) .
... an HP employee expressing his own opinion.
Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

I connect my xbox to hp w1707 and I can't turn the volume up.

Hello. I have a HP monitor with series W1707. I'm connecting my monitor with my xbox 360. Everything is okay but I can't turn up my volume. I can only turn it down. Can anyone help me. I have no manual.

Hi zarithAD, welcome to the HP Forums. Turning the volume up does seem a little unintuitive. According to this document: Pressing the Volume Up Button Does Not Raise the Volume you must first press the '-' button to bring up the volume, and then the '+' should raise it.
Also here is the User’s Guide
I hope this helps.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Issues with using 3 monitors on 2 external gpu

Hi,
I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
lspci |grep VGA:
03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
xrandr:
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
Section "ServerLayout"
Identifier "X.org Configured"
#Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
Option "Monitor-DVI-I-1" "DVI-I-1"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
Option "Monitor-DP-1" "DP-1"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
Option "Monitor-DP-1-2" "DP-1-2"
EndSection
Section "Device"
Identifier "Card0"
Driver "nouveau"
BusID "PCI:3:0:0"
Option "Monitor-DVI-I-1"
Option "Monitor-DP-1"
EndSection
Section "Device"
Identifier "Card1"
Driver "nouveau"
BusID "PCI:34:0:0"
Option "Monitor-DP-1-2"
EndSection
Xorg log (I can see that monitor at time 1767.316):
[ 1766.959]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1766.960] X Protocol Version 11, Revision 0
[ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
[ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
[ 1766.961] Build Date: 13 December 2013 03:11:42PM
[ 1766.962]
[ 1766.962] Current version of pixman: 0.32.4
[ 1766.963] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
[ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
[ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1766.966] (==) ServerLayout "X.org Configured"
[ 1766.966] (==) No screen section available. Using defaults.
[ 1766.966] (**) |-->Screen "Default Screen Section" (0)
[ 1766.966] (**) | |-->Monitor "<default monitor>"
[ 1766.966] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1766.966] (**) | |-->Device "Card0"
[ 1766.966] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1766.966] (**) |-->Input Device "Mouse0"
[ 1766.966] (**) |-->Input Device "Keyboard0"
[ 1766.966] (==) Automatically adding devices
[ 1766.966] (==) Automatically enabling devices
[ 1766.966] (==) Automatically adding GPU devices
[ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.966] Entry deleted from font path.
[ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1766.967] (WW) Disabling Mouse0
[ 1766.967] (WW) Disabling Keyboard0
[ 1766.967] (II) Loader magic: 0x7fec20
[ 1766.967] (II) Module ABI versions:
[ 1766.967] X.Org ANSI C Emulation: 0.4
[ 1766.967] X.Org Video Driver: 14.1
[ 1766.967] X.Org XInput driver : 19.1
[ 1766.967] X.Org Server Extension : 7.0
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
[ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[ 1767.169] Initializing built-in extension Generic Event Extension
[ 1767.170] Initializing built-in extension SHAPE
[ 1767.170] Initializing built-in extension MIT-SHM
[ 1767.170] Initializing built-in extension XInputExtension
[ 1767.171] Initializing built-in extension XTEST
[ 1767.171] Initializing built-in extension BIG-REQUESTS
[ 1767.172] Initializing built-in extension SYNC
[ 1767.172] Initializing built-in extension XKEYBOARD
[ 1767.172] Initializing built-in extension XC-MISC
[ 1767.173] Initializing built-in extension SECURITY
[ 1767.173] Initializing built-in extension XINERAMA
[ 1767.174] Initializing built-in extension XFIXES
[ 1767.174] Initializing built-in extension RENDER
[ 1767.174] Initializing built-in extension RANDR
[ 1767.175] Initializing built-in extension COMPOSITE
[ 1767.175] Initializing built-in extension DAMAGE
[ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
[ 1767.176] Initializing built-in extension DOUBLE-BUFFER
[ 1767.176] Initializing built-in extension RECORD
[ 1767.176] Initializing built-in extension DPMS
[ 1767.177] Initializing built-in extension X-Resource
[ 1767.177] Initializing built-in extension XVideo
[ 1767.177] Initializing built-in extension XVideo-MotionCompensation
[ 1767.178] Initializing built-in extension XFree86-VidModeExtension
[ 1767.178] Initializing built-in extension XFree86-DGA
[ 1767.178] Initializing built-in extension XFree86-DRI
[ 1767.179] Initializing built-in extension DRI2
[ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1767.179] (II) LoadModule: "glx"
[ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1767.179] (II) Module glx: vendor="X.Org Foundation"
[ 1767.179] compiled for 1.14.5, module version = 1.0.0
[ 1767.179] ABI class: X.Org Server Extension, version 7.0
[ 1767.179] (==) AIGLX enabled
[ 1767.180] Loading extension GLX
[ 1767.180] (II) LoadModule: "nouveau"
[ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
[ 1767.180] compiled for 1.14.4, module version = 1.0.10
[ 1767.180] Module class: X.Org Video Driver
[ 1767.180] ABI class: X.Org Video Driver, version 14.1
[ 1767.180] (II) NOUVEAU driver
[ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
[ 1767.180] RIVA TNT (NV04)
[ 1767.180] RIVA TNT2 (NV05)
[ 1767.180] GeForce 256 (NV10)
[ 1767.180] GeForce 2 (NV11, NV15)
[ 1767.180] GeForce 4MX (NV17, NV18)
[ 1767.180] GeForce 3 (NV20)
[ 1767.180] GeForce 4Ti (NV25, NV28)
[ 1767.180] GeForce FX (NV3x)
[ 1767.180] GeForce 6 (NV4x)
[ 1767.180] GeForce 7 (G7x)
[ 1767.180] GeForce 8 (G8x)
[ 1767.180] GeForce GTX 200 (NVA0)
[ 1767.180] GeForce GTX 400 (NVC0)
[ 1767.180] (--) using VT number 3
[ 1767.182] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) Loading sub module "dri2"
[ 1767.183] (II) LoadModule: "dri2"
[ 1767.183] (II) Module "dri2" already built-in
[ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 1767.183] (==) NOUVEAU(0): RGB weight 888
[ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
[ 1767.183] (==) NOUVEAU(0): Using HW cursor
[ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 1767.183] (==) NOUVEAU(0): Page flipping enabled
[ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
[ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
[ 1767.265] (II) NOUVEAU(0): Digital Display Input
[ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.265] (II) NOUVEAU(0): Supported established timings:
[ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.265] (II) NOUVEAU(0): Supported standard timings:
[ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
[ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.265] (II) NOUVEAU(0): EDID (in hex):
[ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
[ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
[ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
[ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
[ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
[ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
[ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
[ 1767.273] (II) NOUVEAU(0): Digital Display Input
[ 1767.273] (II) NOUVEAU(0): 8 bits per channel
[ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
[ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.273] (II) NOUVEAU(0): Supported established timings:
[ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.273] (II) NOUVEAU(0): Supported standard timings:
[ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
[ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.273] (II) NOUVEAU(0): EDID (in hex):
[ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
[ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
[ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
[ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
[ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
[ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
[ 1767.274] (II) Loading sub module "fb"
[ 1767.274] (II) LoadModule: "fb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.274] (II) Module fb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "exa"
[ 1767.274] (II) LoadModule: "exa"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.274] (II) Module exa: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 2.6.0
[ 1767.274] ABI class: X.Org Video Driver, version 14.1
[ 1767.274] (II) Loading sub module "shadowfb"
[ 1767.274] (II) LoadModule: "shadowfb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "dri2"
[ 1767.274] (II) LoadModule: "dri2"
[ 1767.274] (II) Module "dri2" already built-in
[ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 1767.275] (==) NOUVEAU(G0): RGB weight 888
[ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
[ 1767.275] (==) NOUVEAU(G0): Using HW cursor
[ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
[ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
[ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
[ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
[ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
[ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
[ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
[ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
[ 1767.347] (II) NOUVEAU(G0): Digital Display Input
[ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
[ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
[ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
[ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
[ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
[ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.347] (II) NOUVEAU(G0): Supported established timings:
[ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
[ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
[ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
[ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
[ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
[ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
[ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
[ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
[ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
[ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
[ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
[ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
[ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
[ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 1767.348] (II) Loading sub module "fb"
[ 1767.348] (II) LoadModule: "fb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.348] (II) Module fb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (II) Loading sub module "exa"
[ 1767.348] (II) LoadModule: "exa"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.348] (II) Module exa: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 2.6.0
[ 1767.348] ABI class: X.Org Video Driver, version 14.1
[ 1767.348] (II) Loading sub module "shadowfb"
[ 1767.348] (II) LoadModule: "shadowfb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (--) Depth 24 pixmap format is 32 bpp
[ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
[ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
[ 1767.360] (II) EXA(256): Driver registered support for the following operations:
[ 1767.360] (II) Solid
[ 1767.360] (II) Copy
[ 1767.360] (II) Composite (RENDER acceleration)
[ 1767.360] (II) UploadToScreen
[ 1767.360] (II) DownloadFromScreen
[ 1767.360] (==) NOUVEAU(G0): Backing store disabled
[ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 1767.360] (==) NOUVEAU(G0): DPMS enabled
[ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
[ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
[ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
[ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
[ 1767.366] (II) EXA(0): Driver registered support for the following operations:
[ 1767.366] (II) Solid
[ 1767.366] (II) Copy
[ 1767.366] (II) Composite (RENDER acceleration)
[ 1767.366] (II) UploadToScreen
[ 1767.366] (II) DownloadFromScreen
[ 1767.366] (==) NOUVEAU(0): Backing store disabled
[ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
[ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 1767.366] (==) NOUVEAU(0): DPMS enabled
[ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.366] (--) RandR disabled
[ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1767.389] (II) AIGLX: Loaded and initialized nouveau
[ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
[ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
[ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 1767.444] resize called 1920 1080
[ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.479] (II) LoadModule: "evdev"
[ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
[ 1767.479] compiled for 1.14.3, module version = 2.8.2
[ 1767.479] Module class: X.Org XInput Driver
[ 1767.479] ABI class: X.Org XInput driver, version 19.1
[ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.479] (**) Power Button: always reports core events
[ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.479] (--) evdev: Power Button: Found keys
[ 1767.479] (II) evdev: Power Button: Configuring as keyboard
[ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1767.479] (**) Option "xkb_rules" "evdev"
[ 1767.479] (**) Option "xkb_model" "pc104"
[ 1767.479] (**) Option "xkb_layout" "us"
[ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.500] (**) Power Button: always reports core events
[ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.500] (--) evdev: Power Button: Found keys
[ 1767.500] (II) evdev: Power Button: Configuring as keyboard
[ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1767.500] (**) Option "xkb_rules" "evdev"
[ 1767.500] (**) Option "xkb_model" "pc104"
[ 1767.500] (**) Option "xkb_layout" "us"
[ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 1767.502] (II) No input driver specified, ignoring this device.
[ 1767.502] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
[ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
[ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
[ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
[ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
[ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
[ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
[ 1767.502] (**) Option "xkb_rules" "evdev"
[ 1767.502] (**) Option "xkb_model" "pc104"
[ 1767.502] (**) Option "xkb_layout" "us"
[ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
[ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
[ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
[ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1767.504] (**) Option "xkb_rules" "evdev"
[ 1767.504] (**) Option "xkb_model" "pc104"
[ 1767.504] (**) Option "xkb_layout" "us"
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
[ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 1767.505] (**) PS/2 Generic Mouse: always reports core events
[ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
[ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1780.500] Error dropping master: -22(Invalid argument)
[ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
[ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
[ 1780.503] (EE) Server terminated successfully (0). Closing log file.
Thanks for any help!

I have a similar issue except with two ATI cards and four monitors.
I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
lspci:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
My xorg.conf:
Section "Device"
Identifier "ATI0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "ATI1"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Device"
Identifier "ATI2"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-2"
Screen 0
EndSection
Section "Device"
Identifier "ATI3"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-3"
Screen 1
EndSection
Section "Monitor"
Identifier "DVI-0"
Option "Primary" "On"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-2"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-3"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI0"
Monitor "DVI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI1"
Monitor "DVI-1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "ATI2"
Monitor "DVI-2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "ATI3"
Monitor "DVI-3"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
Screen "Screen2" Above "Screen1"
Screen "Screen3" Above "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
xrandr --listproviders show the two cards as well.
Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
"xrandr --setprovideroutputsource 0 1" just plain crashes X

Often lose wireless connection when using HDTV as monitor

I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.

I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.

TV Apple TV MacBook Air:How to connect my computer's monitor and TV as multiple monitors (NOT mirroring)

I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable.
when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
thank you!
Lydia

Morning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario

How to connect my Cinema Display as a second monitor

I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.

Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?

Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.

I cannot get both monitors to work when connecting my MacBook Pro to a VGA monitor using Mini DisplayPort to VGA Adapter

Need help with 2 monitor set up on MacBook Pro.

I am sorry for the confusion. The reason I asked about the speaker bar is that I can't find any information that shows built-in speakers on your monitor. I have looked everywhere, including in the HP specifications.
Here is the Back I/O panel (Input / Output) for your computer:
Figure 2: Back I/O panel
1 - Video Graphics Adapter port
2 - USB 2.0: 4
3 - RJ45 Network (LAN)
4 - Audio: Line in
5 - Audio: Front speaker/Line out
6 - Audio: Microphone in
The way that I have always connected speakers is to the port labeled # 5 (Audio: Front speaker/Line Out). This port allows sound to be sent to speakers. The VGA port is for video only. There is no audio capability. The only connection that sends Audio and Video is the HDMI (High-Definition Multimedia Interface) connectors.
This is the type of connector that I would expect to see coming from your speakers:
The male one at the bottom of the picture.
Please check the monitor carefully to assure that there are actually speakers built-in. I just don't want us to continue fighting a problem that doesn't exist. There may have been some incorrect information in the advertisement that you read.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Mini Displayport to vga adapter on MacBook pro 13" late 2011. No signal on external monitor

Hi
Connecting a Late 2011 MacBook Pro 13" to an external monitor, trough mini Dispalyport to vga adapter, i see "no signal" messagge on external monitor, even if i get it as secondary monitor on Preferences > Monitor of my MacBook it's visible (i can change resolution, position, clone screen, ecc.).
Any suggestion? somebody found the same problem?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

Mini-DVI to VGA flicker with Snow Leopard and 2nd monitor

I have a 24" iMac (fall 2007) and recently purchased a 26" Vizio (VMM26F10I) and connected it as a 2bd monitor for my iMac using the Mini-DVI to VGA adapter Apple sells.
The new monitor will flicker now and then and some times will go to no signal. I have to change resolutions to something else and then back to standard setting to get it to come back or unplug adapter and plug back in.
Is there a fix for this?

26" VGA...? Which resolution/frequency? Have you tried a fresh cable with clean connectors, etc....
What did Vizio say when you contacted them with this question about your new purchase?

HT3153 Can the early 2006 MAC mini support a DVI to hdmi adapter for TV monitor support?

Can the early 2006 MAC Mini support a DVI to HDMI adapter for a TV Monitor?

Hi, I can't see why not...
Supports digital resolutions up to 1920x1200 and analog resolutions as high as 1920x1080.
http://www.everymac.com/systems/apple/mac_mini/specs/mac_mini_cd_1.66.html

DVI to Video adapter CRT Broadcast Monitor? Is there a better option?

I am a freelance motion graphics artist, and I use Final Cut Studio, After Effects, Photoshop, etc.
I need a CRT monitoring solution for checking my color grades, etc.
SD resolution is fine, and i've got my eye on a JVC TMH-150CGU broadcast monitor from B&H. It has an S-Video (Y/C) input.
I'm thinking of using the Apple DVI Video Adapter hook up to it via S-Video.
I have a Pantone Eye-One that I can use to calibrate the monitor.
Would this setup work ok in the above applications? Will it support Digital Cinema Desktop Preview in Final Cut?
I have the 30" Apple display. Will connecting the CRT via DVI steal 256mb of my video memory???? That seems drastic considering it's already driving a 30" display AND running after effects!!
I've thought about FireWire monitoring, but I suspect the FireWire/DV 4:1:1 compression will affect the colors.
I know a CAPTURE CARD would be ideal, with SDI, etc... but I don't really have a need for a full blown capture card at the moment. I don't think use it to it's full potential (ie- to capture). It seems silly spending $$$$ just for a monitoring solution.
Or is a capture card my only option for pro monitoring? If I was to buy one, i'd want a future proof one should I digitize in the future (ie, HD, with analog support), so that leaves either a Blackmagic Intensity Pro (which I believe is only 8 bit) or a BlackMagic Decklink HD Extreme. And then i'd also need the SDI or Component expansion card for the JVC monitor, and before I know it, i've spent over $1000, just for a decent monitoring solution. Ouch.
I strongly considered the Intensity Pro card, because I could monitor SD component, and HDMI HD from the same card. But it put me off when I heard it ws only 8 bit. But it is 4:2:2 though.
What might KILL the Apple DVI adapter option is I have a TON of PAL footage, and I heard the adapter is NTSC only (or a seperate PAL version). So even though the monitor supports both standards, the adapter doesn't. Or so I've heard.
Very confused. Any other options or advice would be greatly appreciated!
Thanks!

Hi,
From the sound of things you have answered your own question.
If you wanted a CRT to just check video playback, safe areas and text legibility then a cheap option of monitoring via a deck or camera would suffice.
You mention a lot of PAL footage just as a FYI this would be 4:2:0 as opposed to 4:1:1 with NTSC under the DV codec.
You don't mention (and I'm sorry if I missed it) what codec you output to. I had always found when working with DV only that a DV monitoring solution was sufficient for most applications.
However as you indicate that colour plays a factor in the equation bite the bullet and get a decent monitoring system from the off. I am using the Decklink Extreme and have found it to be excellent especially in real time conversion and monitoring of HD to SD.
In addition you get the ability to work all the way up to 10bit (drives allowing) and capture over SDI with full deck control.
You could stagger the cost since the BM card will let you monitor composite out in addition to component so the expansion board for the CRT might not be a must have from the get go for you.
Whatever route you go you will want to calibrate the CRT using broadcast colour bars rather than a Pantone system, theres plenty of info on the web regarding this . . and why.
Message was edited by: Steve Mizen

IMac 10.4.11 Because permanent vertical lines have appeared on my screen, I need to get a new monitor. The adapter apple sells goes from female VGA to mini-DVI. What kind of cable should I get as well:female to male?

If I use an adapter (female VGA to mini-DVI) for my iMac 10.4.11 OSX, I also need a cable. Should that cable be female VGA to male VGA?
Permanent vertical lines have appeared on my display, and connecting to another display (monitor) requires a cable and adapter. I want to be sure I am purchasing the correct cable for the Apple adapter.

What made me think I need to format if I upgrade the OS?
I just presumed so really.
What made me think I need to constantly format computer with my problem?
Well, after many attempts to repair the drive, which fails, cannot even reach the log in screen, I am left with no other choice?
And also, I have to note now, System Preferences keeps crashing without reason, it either takes ages to load, just by clicking it to open, or clicking something within it, or it just crashes.
And temporarily, it freezes the computer totally, with no response.
Seriously, am I missing a system file or something? Anyone experienced this problem before?
My computer is literally a blank computer right now, installed VLC and Shades, updated Adobe Flash Player, installed Skype and Adium. I would say Growl from Adium caused it, but it has happened prior to Skype and Adium. Any ideas anyone?
Thanks,
From Lelouch

HP W1707 Monitor

Similar Messages

Maybe you are looking for