Hp w1907

my computer has many problems and i just need to know how to reset my computer...not the monitor because i know how to do that i just cant reset my computer. anyone help??

I suggest that you post your desktop PC's Product name or number instead of the display's product name as you have done.
Help us to help you by posting the following information.
1. The full Model No. and Product No. of the HP product - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

Windows vista 64 bit, w1907 desk top will not start up..

2007 pc vista w1907 desk top compputer will not start up.

I CAME HERE TO HOPEFULY GET HELP. BUT I GUESS I CAN GIVE SOME TOO. MY VISTA 64 IS FEEZING AND DUMPING TOO. THE WAY I GET IT TO RE-START IS...HOLD THE POWER BUTTON DOWN FOR 10 SECONDS. IT WILL POWER DOWN. UN-PLUG IT FOR A FEW SECONDS. PUG BACK IN. THE LIGHTS SHOULD BE OFF. IF NOT. YOU NEED TO UNPLUG AND LET REST FOR AWHILE.MAYBE 1 HOUR. IF THE LIGHT IS OUT.PUSH IT TO START UP. IF IT DON'T START.HOLD DOWN FOR TEN SECONDS AGAIN.DON'T UN-PLUG IT.PUSH TO START AGAIN. DOS START-UP SCREEN WILL COME ON.USE KEYBOARD TO SELECT SAFE MODE WITH NETWORKS.CLICK ENTER. IT SHOULD START WITH LIMITED SOFTWARE TO RUN AND TROUBLE SHOOT. I JUST DID ALL THAT TO GET HERE TO THIS FORUM. DOESN'T SOLVE MY PROBLEM. BUT AT LEAST FOR NOW I AM TO SEARCH FOR MORE SOLUTIONS. LAST WEEK I DOWNLOADED A UPDATE FOR NIVDIA DRIVERS. SEAMED TO SOLVE ALL PROBLEMS FOR ABOUT A WEEK. UNTIL YESTERDAY..I LOVE THIS VISTA 64. BUT EVERYONE HAS PROBLEMS WITH IT. NOW, I SEE THERE ARE ALREADY PROBLEMS WITH WINDOWS 8. (**bleep**). I'M THINKING ABOUT BLOWING UP THIS POS AND SWITCHING TO A MAC
HP BETTER GET THEIR ACT TOGETHER OR I'M DITCHING THEM LIKE SO MANY HAVE ALREADY

Windows Compatibility With HP w1907 Monitor

Is my HP w1907 monitor compatible with Windows 8? The Copyright on the software disc is 2006-2007. Thanks!

Hi,
Yes it is, you need the right port on your machine to connect to it. It has one VGA port and one DVD-D port.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Auto Adjustment in Progress Flashing HP w1907

I have a HP w1907 monitor and i hooked it up to my macbook and it works great just it keeps poping up Auto Adjustment in Progress then goes back to what i was doing.
I have to white plastic, removiable battery macbook OS X 10.7.5 Lion.
if that is needed.
Plz and thank you for help!!!
~Gamer

Hello Diqoter,
You keep getting a message that auto adjustment in progress.
Have you tried to connect the monitor to another computer?
It might be that the auto adjustment button is stuck.
If you still have the disk that came with the monitor you can try to run the disk.
Here is a link to the manual for your monitor.
Do a hard reset of the monitor.
Unplug the power going to the monitor and hold down the power button for 15 sec, this will reset the hardware in the monitor.
Let me know how everything goes.
Have a good day.

HP W1907 monitor showing sleep messege

How do i get my hp 19in monitor to the correct display i onky have a vga cord need step by step instructions please help

Hello @staccz,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are looking for step by step instructions on how to set up your HP w1907 Monitor. I am providing you with the User’s Guide for your monitor which starting on 3 - 1 provides you with step by step instructions on setting up your monitor.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP w1907 microphone?

I have an HP Pavilion a6112n PC running Vista and an HP w1907 monitor. I just signed up for a Skype account and tried to make a call. I could hear and see my friend, but she couldn't hear me. My Skype message said that it can't detect a mic sound card. Do I not have a microphone on this unit? Technical knowledge of computers very limited. Thank you.

Hi ncnash,
I don't believe your monitor has a microphone in it. Here is your specifications: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00916924&cc=us&lc=en&dlc=en&product=3351967&tmp...
Your PC has a microphone port that you can use to plug in a mic.
Do you have a webcam that you are using so your friend can see you in Skype? Does your webcam have a built-in mic?
If you don't have a mic on your webcam, you can pick up a microphone pretty cheap at almost any electronics store.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

No sound from my HP w1907 monitor and all the plugs are in and the sound is turned up.

I have a HP w1907 widescreen monitor and I am using it on windows vista pro 32 bit and I have no sound. Everything is hooked up correctly and the sound is turned on and up.

HI blue000,
Are you using an HDMI, DVI, or VGA connection? Did you enable the speakers using the (OSD) menu?
HDMI will support audio and graphics input. Please refer to this HP support document.
A VGA or DVI connection requires an audio connection (see here).
Jaco
****I am not an HP employee****
Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" if your problem has been solved.
HP Products:
810-150se Desktop
17t-j000 Notebook
1380t Desktop
560z Desktop
Errare humanum est.

W1907 device driver not found

Bear in mind I'm brand new. With that said, I purchased a new system recently and in the process of setting it all up i was prompted to load the device driver for my w1907 monitor. Upon doing so I got the message that the software was found but a problem occured while trying to load it. Now everytime I reboot I get the Found New Hardware notice saying the driver needs to be installed. I try everytime and it does the same thing. I am using this monitor with no problems at this time, but I'm running a separate set of audio speakers so don't know if there's any sound issues. Should I try to find a solution to this? I went online to HP's support page and downloaded their driver, the same results. If it's not a big deal then how do I get the notification to stop popping up on reboot? The "don't ask this again..." about the driver install doesn't work. Any advice on this would be appreciated, Thanks in advance, oldschool
This question was solved.
View Solution.

This might be because you used the driver cd for the lcd which I recommend to never use.
Try going to Start, rightclick on computer and go to Properties, on the top left corner click Device Manager then when it comes up find Monitors, click on the plus sign, right click on the HP.....lcd and go to Update Driver Software, then choose Browse my computer for driver software, then on the top bottom click Let me pick from a lisr of drivers.... then click Generic PnP Monitor go next, wait a few moments, then click Close or Finish and restart the pc.
Let me know if it works.

HP w1907 : Powering-up gets stuck at blue "HP invent" Boot Screen

Hello all,
I've HP w1907 desktop... I am using it since 2008.
Last month I've format it to have new windows 7 Ultimate in it... Previously also I was using win7 Ultimate.
But it was keep restarting after the use of 4-5 minutes and so I've installed the OS all over again.
It was working fine... after 3-4 weeks, when I started it, it gets stuck at blue "HP invent" Boot Screen.
This screen has the instructions for entering the "Boot Menu", "Setup", and "System Recovery" by pressing the "Esc", "F10", aor "F11" key. It just sits there forever.
If I try to enter the "Boot Menu"by pressing the "Esc" key, I get a message "Loading Boot Menu.....", but then it just hangs there forever. If I try to enter the "Setup Menu" I get a similar result - it says "Entering Setup...", and just hangs there. Pressing the "F11" key doesn't seem to do anything.
Any ideas on how to fix this?
By searching forums I've tried resetting the BIOS - which I've got from here :
http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/Powering-up-gets-stuck-at-blue-quot-HP-in...
and
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01080282&tmp_task=prodinfoCategory&cc=us&dlc=en...
After doing this also, the result is zero
Please help me...
I am in hurry...
Thank you.
This question was solved.
View Solution.

Hello Sir,
You was right...
The CMOS Battery was discharged!
I've replaced it ... and the date and time problem has been solved...
And you was right again by saying that it should not cause the problem while start up...
So the second problem (Major Problem) was CD Writer !!!
(I've changed the location of the PC last 3-4 weeks ago!!)
may be the it has grabbed the hardware of CD Writer..
And as the hardware of CD Writer was not working as per the expectation the BIOS may have got stuck...
And so it was unable to enter in Boot or Setup menu !!
I've removed the data and supply cord of CD Writer... PC is working good now...
I am thankful to you sir.. for your thourough help..
Without you it may not happened
Now I am going to repair the CD Writer by opening it tomorrow..
Any help from you will be great help to me and its really appriciable..
God Bless You...
Thanks for your valuable time.

Upgraded to Windows 10 and now I can't see my two HP w1907 monitors or change the screen resolution

I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).

I just upgraded my computer from Windows 7 Professional to Windows 10 Professional. Before the upgrade, I had two monitors. Since the upgrade completed, I no longer have two monitors. I need to figure out how to get two monitors back, as well as how to get the correct drivers for my two HP w1907 monitors installed, so that my system recognizes that I have two monitors. I also need to be able to reset the screen resolution to what I had before (in Windows 7).

Macbook pro to HP w1907

I just bought an external monitor and mini-DVI adapter for my macbook pro 13'( latest model) I got everything connected correctly, but when I tried to use the external monitor, all I got was a message saying "No signal", and the display promptly went to sleep. What puzzles me though, is that my macbook fully recognizes the monitor, yet the monitor isn't detecting signal.
Any ideas? I'm baffled and quite a bit frustrated. Thanks a bunch

You might consider reposting this with a short but more detailed title. The title is what people here see and is the deciding factor on whether or not they open your post. I think that your question is a hot topic and will be answered fast. Good luck.

My monitor is an HP w1907. It suddenly goes dark.

If i turn it off and back on it goes dark again. If I wait for say 1 hour it comes back on for a while.
Is this failing and should be replaced?

Can you test another monitor and/or this monitor at another pc?
If the behaviour follows the monitor then it seems like it's going to die.
*** Say 'Thanks' with Kudos ***

HP w1907 monitor flashes briefly and then goes black. Catch a brief message of "No DV1 input"

Is this a monitor issue, cabling or computer problem? Thanks

Hello adaokie,
We won't know what kind of issue it is until we start ruling things out. Start with the cabling as it is generally the easiest to determine.
From there you can hook it up to another computer. If it does the same thing then we know it's a monitor issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

HP w1907 monitor - screen is going black

Please help! 2+ years new. I didn't make any recent changes. Monitor goes black after a few minutes. I tried without internet connected and still goes black.

Hi,
Press Menu button on front of the Monitor, choose Factory Reset with - and + Keys, press Select Button. If the issue persists, contact HP to have it replaced.
Thank You.
Kiran Talluri
Say thanks by clicking the "Kudos! Star" which is on the left.
Make it easier for other people to find solutions, by marking my answer "Accept as Solution" if it solves your issue

Hp w1907 monitor

will not stay awake. as soon as it powers up it goes to sleep.

I just tried the reset, its doing the same thing, except its not going to sleep. After displaying the message it just goes black like there's no signal. I can even see the desktop and open programs for the two seconds its displaying before it does. I have tried another PC and the monitor does the same thing, and a different monitor works just fine on both PC's.

Hp w1907

Similar Messages

Maybe you are looking for