HP Web Jetadmin 10.2.74918 - Latest Firmware

I'm looking for the rfu/dld files for a whole load of printers so I can add them to the HP Web Jetadmin. I used to have a link (which i have cleverly lost) Is there still a central store (url) of all of these?
E.G HP Laserjet CP1025NW doesn't have a file download on the HP site only a Download Utility and need connectivity to the printer to install.
Any help appreciated.
Andrew

Hello.
I think this can be the cause of the problem, it is from the late break news of the version 10.2.71771.
At this time, HP Web Jetadmin is not supported on Windows Server 2008 R2 or Windows 7 (as a
server host platform). HP plans to support these versions of Windows in a future release.
There is a newer version on the download site 10.2.73942 SR5, it mite helpful to use the newest version.

Similar Messages

HP Web JetAdmin (x64) v10.2.73942 cannot download CM6030 firmware

Problem Description
Cannot Get the CM6030 firmware image
Printer Model
CM6030
Operating System (including service pack revision)
WindowsXP x64 SP3
Connection Method - USB, Hardwired LAN, Wireless?
Hardwired LAN (Computer and Printer)
Error messages - on printer screen and/or computer, any blinking light patterns.
When I attempt to Get the CM6030 firmware image I receive the message:
Could not connect to www.hp.com: The remote server returned an error: (404) Not Found. Please check your Internet settings.
The other firmwares download fine.

Bump.
Does no one else use this printer and Web JetAdmin?

HP LJ M4555 MFP no Device Utilization Data Collection in Web Jetadmin 10.2.77156 (SR6)

Recently added three newer HP LaserJet M4555 MFPs to our Web Jetadmin Data Collection for reporting. The Data Collection for Accessory Inventory, Supply Utilization, Device Inventory and Event Log History all worked - they return a Collection Status of Collection Succeeded.
However the Device Utilization returns a Collection Status of Device Error (not very helpful).
We're using
Web Jetadmin 10.2.77156 (SR6)
I couldn't see anything flagged in this doco as to why it might not work:
http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01894187/c01894187.pdf
All three MFPs are
Firmware Datecode: 20121208
Firmware Revision: 2201057_231936
I couldn't see anything flagged in this doco as to why it might not work:
ftp://ftp.hp.com/pub/softlib/software12/COL38070/sj-114224-1/readme_ljM4555fw_2201057_231936.pdf
We have several older M4555 MFPs that we are collecting this data from successfully - I've tried to compare settings and can't see anything different standing out. They do have older firmware.
Firmware Datecode: 20110225
Firmware Revision: 2110187_149149
and
Firmware Datecode: 20111217
Firmware Revision: 2131305_192067
Any MFP with any of these firmware revisions report the data fine.
Does anyone know if there is a particular setting that is required to allow the Device Utilization Data Collection?
Or if there are any known incompatibilites with this firmware revision?

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Latest Firmware for WRT300N V1.0

I have WRT300N V1.0 with Firmware v1.03.6.
Anybody know what is latest Firmware for WRT300N V1.0 and where I can get it.
I tried at Downloads under Support in Cisco website but it said "No firmware/driver download available".
Thanks

There were three versions available at the time:
Date:???
WRT300N-v1.1_1.51.2_fw.bin
6/1/2006
Firmware version 093.3
File size 2.93 MB
5/5/2006
Firmware version original
File size 1.41 MB
Linksys should bring back the download page. They are legally obligated to do so.
Copy and paste this link:
https://web.archive.org/web/20060702080428/http://www.linksys.com/servlet/Satellite?childpagename=US...

Web Jetadmin 10.2

I have a desktop running W7 Pro 64bit. I've downloaded the 64bit version of Web Jetadmin. I'm logged on to the desktop with a domain administrative account. I've right clicked the exe file and selected "Run as administrator".
After accepting the defaults, the software starts installing and then tells me "Error 1920. Service HPWSProAdapter failed to start. Verify that you have sufficient privileges to start system services.
The first time this happened, I added my domain administrative account in to the local administrators group on the desktop and tried again. Same result.
I then went in to services and the service exists, so I changed the service logon to my domain admin account. No go - same problem.
I then tried starting the service - if I change the logon account for the service to the local administrator, I get told the service failed to start because of a logon failure, even though I can log on to the desktop with the same account!
I've now changed the service logon account to a local system account and I get the error "Error 1067: The process terminated unexpectedly".
Does anyone have any ideas on how I get this software installed and working, please.
Thanks
Phil
GMSchool

Jon_M wrote:
Hi Phil, has there been any resolution to this? I am having the same error when trying to launch the service. I'm using Windows 7 SP1, web jet admin 10.2.74918
Hi Jon_M,
As mentioned by Mikemad and as referenced by this WJA Late Breaking News document, HP is currently working on resolving this issue for a future release.
From the referenced document: "If you want to manage these HP models, HP recommends that you run HP Web Jetadmin 10.2 Service Release 5 on a Windows 7 or Windows Server 2008 host without SP1 updates. HP is investigating this issue and will provide a resolution in a future release."
Although I am an HP employee, I am speaking for myself and not for HP.

HP Web Jetadmin, PC-CONNECTED printer and Toner level problem

HP Web Jetadmin 10.3.93994 (10.3 SR7) running on Windows Server 2012 (Microsoft Windows NT 6.2.9200.0),
HP LaserJet M1536dnf MFP is connected via USB to the computer with Windows 7 SR1 64.
The latest drivers installed, SNMP, HP SNMP Proxy_64_10_3_0010 and HPWSProxyService_10_3_1 installed.
HP ToolboxFX shows the toner level, the approximate number of pages remaining, cartridge serial number, etc.
HP SNMP Proxy is not working.
HP WS Proxy runs, HP Web Jetadmin displays all but the state of supplies - writes "not available".
File HPWSProxyServiceLog.log errors and warnings does not contain, at the level "All" has many lines of "Calling UIO for ..." with the result of "Status code is 200".
When printer as networked - this is no problem - Jetadmin shows everything including toner's level.
Does HPWSProxyService_10_3_1 support status of supplies (toner level) for printer HP LaserJet M1536dnf MFP?

Bump.
Does no one else use this printer and Web JetAdmin?

Latest Firmware version for Nokia 5800 in India?

I am currently using a Nokia 5800 with firmware version v50.0.001.
I have installed the latest Nokia Suite (3.7.22) and it reports that there are no firmware updates available. I tried to find the updates using the Menu->Applications -> S.W Updates as well. This doesn't report any firmware updates either.
But the Nokia India page for 5800 states that the latest version is 60.
Latest software release for Nokia 5800 Xpress Music is 60.0.003
New, faster version of the web browser, including web search integrated into the web address field, and support for multiple windows and web addresses containing non-Latin characters
New Big clock feature, displaying the time and date when you press the menu key, if the screen and keys are locked
Ovi Contacts removed
Usability improvements
Performance improvements
How do I update to the latest firmware?
Solved!
Go to Solution.

Availability of update depends on Product Code / Region. Also, for Network locked devices, update is possible only after an approval from the Operator. Seems oone of these is preventing you from getting the update. As both FOTA nad Nokia Suite is not providing you with the update there is nothing that you can do except asking your local Nokia Care whether they can help you ...

My macbook pro screen remains grey after latest firmware update

i just had the update notification for the latest firmware, proceeded to do so, and the screen remains grey, its been more than one hour and still grey, since its a firmware update i don't want to disturb it, but could it be that is taking so long?

Reboot it by pressing the power button down hard to force a shutdown.
If your still having problems, take it to Apple. I hope you have AppleCare becuase if they can't fix it, it's a new logicboard.

HT3728 Does factory reset go back to latest firmware update.

I have resently updated my airport express to latest firmware. The airport express is configured as an extension to my wifi with an Extreme as main device.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
I have since then tried to do factory reset several times without getting the device up and running again.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
I have not been able to discover the express from my iPad, iPone or iMac again.
Could the reaons be latest firmware update?
Any advice to get it back to normal?
Thanks,
Per

Does factory reset go back to the latest firmware update.
A Factory Default Reset will not affect the installed firmware.
Shortly after the firmware update (1-2 days) the express stopped working and status light turned yellow.
A solid amber light is unfortunately an indication that the internal power supply inside the AirPort Express is failing, or has failed.
I have since then tried to do factory reset several times without getting the device up and running again.
The AirPort Express has failed, and will need to be replaced.
When doing factory reset the status light turns yellow after releasing the button and stays amber with short interval with green (1 second every minute or so)
This is yet another confirmation that the Express has failed, and will need to be replaced.

Internet stopped working on MBA after latest firmware update. Help please!!!

Internet stopped working after installing the latest firmware update. WiFi still connects to router, our other mac desktop still connects to internet as usual (same network). I can't even re-install the MBA OS since it needs an internet connection!!!
Any ideas?

FIXED.
I swapped our wireless router for a newer one, internet seems to work fine again (we were sent a new one by our internet provider which we never set up until now).

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

Zen Touch latest Firmware Update...player not connec

I tried installing the latest Firmware update for my Zen Touch (released 2-09).
The player is connected and recognized by Windows and the Media Explorer. However, when I try to install the new Firmware it keeps saying "player not connected".
I tried d/l two different language packages cause I wasn't sure what counted - player language or operating system langauge. Anyway, that didn't make a difference.
So what do I do? I have no idea where to start. It's firmware for the correct device connected through Windows XP.
I have made a firmware update before, which worked fine. After that I updated the media explorer software.
Help is very much appreciated! Thank you in advance.
-tina-Message Edited by tinas on 2-0-2005 08:56 PMMessage Edited by tinas on 2-0-2005 09:00 PM

Perhaps it's worth making sure no software is using the player, so reboot the PC, and turn off the Creative Detector. Then try again.
Are you trying to upgrade to the .0.03 version?

TC issues after latest firmware update

Here is the skinny, my TC went through the normal firmware update a bit ago. Wednesday my Internet stopped working, when I use the Airport Utility app it showed the TC online, at first, then it gave me the error that the TC did not have a valid IP. Thought might have been a problem on my ISP's end so I grabbed another router and set it up Internet no problem. Has to be the new firmware right so I pushed the firmware back 3 versions, and still the same thing no valid IP but connected to the Internet but no HDD (Yes it said not a valid IP but connected to the Internet on one wireless PC). Everything else in the house would not connect to the TC they could see it but when you went to connect never asked for a password and I got the spindle of death type deal. I saved my settings and did a hard reset with the button on the back of the TC, started over and rebuilt the connection, same thing happened not a valid IP. I have read that Apple released 3 different firmware updates supposedly the last one works, it doesn't when I load the firmware I get the same error TC does not have a valid IP. I need some help, I have cycled through power down and power up situations over and over. Anyone have any other suggestions?

Need some more info.
What is the modem.. make and model?
Is it both modem and router or just a modem?
What is the actual model of the TC.. the number from the base.. A1xxx where the x are numbers.
The latest firmware is an issue.. that is 7.6.4 and you should go back to 7.6.1
But it does seem hard to get rid of properly.
I want you to do a factory reset not just a hard reset.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Please redo the setup using all SMB names.. that is short, no spaces and purely alphanumeric characters.
eg TCgenx (use actual gen if you want) for base station name.
TCwifi for wireless name. (or TC24ghz and TC5ghz which is well worth naming both bands so you can test more carefully).
Please download and install a v5 utility on a computer if any of them use up to Mountain Lion.
Tell us what OS the computers are running and I can tell you how to install the old airport utility.
Test the TC in bridge to your other router is also a good alternative.

Latest firmware update and startup problems

Hi I have been reading all about this so-called firmware and its importance in keeping updated on my new macbook pro. Therefore I have been diligently trying to keep it updated over my dial-up connection. I installed the latest firmware as my automatic update suggested. Now I get the spinning startup circle of death. Tried booting in safe mode to no avail. Help? (I also have version cue installed.)

Hi jbell,
Firmware updates are not availible in Software Update, only sofware updates are. Did you Repair Permissions prior to and after updating software? You always should. Go to Applications-Utilities-Disk Utility, and highlight Mac OS X in the left hand column, then Repair Permissions below. Firmware updates are available here....
http://www.apple.com/support/downloads/macbookproearly2006firmwareupdate101.html
http://www.apple.com/support/downloads/macbookpro15inchsmcfirmwareupdate.html

Mid 2006 iMac Boot Problem (Since latest firmware update)

I have a Mid 2006 17" iMac. Ever since the latest firmware update in early December, about every other startup I've been having boot problems. After the white screen with the Apple Logo and the spinning wheel it goes to a blue screen like normal, but instead of the 'Loading Mac OS X' white window popping up it stays blue and the spinning loading wheel starts. I've left it loading for quite a while before and nothing changes. I have to do a force shut off by holding the power button. and then I start it up and it will boot normally.
Any help would be appreciated.
Thanks!

Actually, I think it'san early 2006.

HP Web Jetadmin 10.2.74918 - Latest Firmware

Similar Messages

Maybe you are looking for