HP Web Services enabled, but info sheet not printing

Hi all
Just installed my new LaserJet Pro MFP M128fw and networked it with a static IP to suit my network.
Printer is accessible to ALL computers on the network.
Can print, scan, copy and fax without ANY problem from any computer. Can ALSO print from my networked mobile phones.
ALL computers, mobiles and my new HP printer are configured with static IPs. ALL have DNS of 8.8.8.8 and default gateways installed.
NO problem accessing the net from any one of the computers or mobiles.
The printer is web service enabled and I am able to access the printer's web page from my computer wirelessly AT WILL.
I can enable web services (successful enabling from both computer OR Printer) WITHOUT any problems. Able to view the email address sent by HP's ePrint service BOTH on the computer AND on the printer.
Problem:
Then comes the problem - I am unable to print the Information Sheet which contains the code to register my printer on the HP ePrint Website. Have tried entering the printer email ID (characters before the @) at the printer registration prompt, but the website says that it is invalid, because apparently, the Information Sheet print out on MY printer is required, to complete the registration of my printer for the HP ePrint services.
Have tried removing web services from the printer and restarting and re-enabling. Have tried shutting down my router and restarting. Have tried at various times over the past 48 hours just in case it was an HP website overload. When I try to print the information sheet directly from my printer, it goes into perpetual "Connecting..." until it just goes off. NOTHING WORKS!!! NO ERROR MESSAGES!!! JUST NOT PRINTING THE INFORMATION SHEET.
Am now beginning to feel that perhaps the EPrint service is not available for India, but can't seem to locate that information on the HP website. If so, would DEFINITELY look at it as a lacuna / default in terms of clarity and consumer service, as this was one of the principal reasons for my purchase of THIS particular model. Believe me, it wasn't cheap.

Hi Gappu,
Thank you for the updates.
I can definitely understand your reluctance to change how your network is setup. If you are like me you’d get started doing it and someone would interrupt enough that you don’t remember where you were when you were interrupted and something simple but important gets missed.
I have included a link by @VisionAiry titled Check the Anti-Virus for Blocked Ports and Timed Scans and it is regarding the ports that are used. I’m wondering if one of the ports might not be configured correctly for ePrint.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Web services enabled RFC for SO creation in SAP 5.0 is not responding

Dear Members,
Third party application is not able to getting response from SAP R/3 web service enabled RFC.
We have created a RFC for creation of Sales order by passing mandatory values into SAP thorugh third party application from outside SAP. Accessing RFC in SAP through Web service is not sending response properly. However Sales Order is getting created in the SAP system perfactly, in return to third party application to out side SAP through web service throughing an Exception.
As standalone RFC in SAP, which is creating Sales order perfactly.
Here we have deleted web service of RFC many times and recreated also, still the problem is not get resolved.
Web services is got configured perfactly in the SAP, because other RFCs are working fine.
Please someone suggest how to resolve this issue in case of Sales Order creation through web service enabled.
Sudheer

Hi ARC,
Here the issue is that, Sales Order is getting created but while sending the Order num. to Webpage through web service then rasing below Exception.
Runtime Error UNCAUGHT_EXCEPTION
Except. CX_SOAP_CORE
Date and Time 07.05.2008 20:13:24
ShrtText
An exception that could not be caught occurred.
What happened?
The exception 'CX_SOAP_CORE' was raised but was not caught at any stage in the
call hierarchy.
Since exceptions represent error situations, and since the system could
not react adequately to this error, the current program,
'CL_SOAP_TRANSPORT_EXTENSN_ROOTCP', had to
be terminated

Web services (eprint and Apps) could not be enabled

just opened my new HP officejet pro 8600 and trying to enable web service and I received the following error: web services (eprint and Apps) could not be enabled. I have no idea how to debug this issue.
Any help out there?

They are the same, however be advised that anything that is pending in the queue will be gone, as well as your current custom email address. You will have to readd the printer with a new info page, and use a different custom email address.
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

WebLogic 10.3.0, web-service enabled session beans, and CMT transactions

Does WebLogic 10.3 support CMT for JAX-WS Web-Service enabled EJB 3.0 session beans?
When a client invokes the following Web service:
@WebService
@Stateless
@TransactionManagement( TransactionManagementType.CONTAINER )
public class TestService
    @WebMethod
    @TransactionAttribute(TransactionAttributeType.REQUIRED)
    public String echo( @WebParam( name = "param" ) final String param)
        Context context = new InitialContext();
        TransactionSynchronizationRegisttry registry =
          (TransactionSynchronizationRegistry)
            context.lookup( "java:comp/TransactionSynchronizationRegistry" );
        registry.putResource("foo", "bar");
        return param;
}WebLogic throws this exception:
SEVERE: Transaction does not exist
java.lang.IllegalStateException: Transaction does not exist
     at weblogic.transaction.internal.TransactionManagerImpl.putResource(TransactionManagerImpl.java:2033)
     at weblogic.transaction.internal.TransactionManagerImpl.putResource(TransactionManagerImpl.java:2029)Is this a bug in WL 10.3.0?
Thanks in advance.
Edited by: user572625 on Aug 18, 2011 12:29 AM

This is fixed now. Someone had defined a Servlet for the web service in web.xml that was preventing the EJB container to kick in.
Edited by: user572625 on Aug 25, 2011 11:54 PM

Web Service Endpoint URI expected. Not found endpoint with URI /wssproc

Hi All,
We are following the steps mentioned here http://help.sap.com/saphelp_nwpi71/helpdata/en/ea/c91141e109ef6fe10000000a1550b0/frameset.htm to configure the message level security in our new PI 7.1 system.
We have created the RFC destination with prefix /wssproc/plain?style=document. But when we test the RFC connectioon, we get the following error message:
Status HTTP Response 404
Status Text Not Found
And response body is: Web Service Endpoint URI expected. Not found endpoint with URI /wssproc.
Are we missing a configuration point? Do we need to create the endpoint manually? And if yes, how?
Regards,
Masoud
Edited by: Masoud Ahanchian on Jul 23, 2009 4:58 PM

Well, in addition to the 404 message I get the following error as well (i.e. if I go to the link http://<server>:<port>/wssproc/plain?style=document)
Web Service Endpoint URI expected. Not found endpoint with URI /wssproc.
Regards,
Masoud

Enable Web Service access for a Web service-enabled client

Hi,
I want to access data in Oracle CRM On Demand from a Web services-enabled client. The "Oracle Web Services On Demand Guide" suggest the Web Services Access should be granted by Customer Care representative. By default, this access is enabled for the Administrator role for new companies. However my admin account can't access web services from a web enable client.
Can anyone please suggest me the setting/step that i need to enable Oracle On Demand Web service access from a Web services-enabled client?
Note: I am new to oracle on demand so my query can be a silly thing.
Thanks & Regards
Ravish

I was able to resolve this issue. Actually, i was trying with trial account that don't allow the OCOD web service integration.

How can i see when someone has accessed my call/text log. (This is possible on google) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in

How can i see when someone has accessed my call/text log. (This is possible on google/gmail) I have been informed that someone has accessed my activity log and is giving my information to a third party. I believe it is a service tech, but I am not interested in persuing that further. I just need to see when my account has been accessed if possible.

Hi lynniewigs,
This is a common concern among Android and I-phone user, and one of the drawbacks to using a smart phone. We lose so much privacy. Our phones become cameras into our homes for us to be spied on.
I don't know what type of phone you have, if it is even a smart phone, but here is an example of an application that you can use to determine which applications are accessing your information and sending it out.
Permission Scanner - Android Apps on Google Play
Google just recently revamp their permissions geared to hide invasive applications that spy and send out your information without your knowledge. Report says be aware of what your Android app does - CNET
Please continue to be mindful of the apps you download and the permissions you give.

I can't drag files to my iPhone 5 from iTunes. I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes Match that I know of

I can't drag files from iTunes to my iphone 5, I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes M

Correct. When you purchase devices, they would have stated the OS they needed to work, on the box. This can be overlooked, but it is very important to check when purchasing.
You current OS, is so old, that they technology build into the new devices, is not something your OS understands. It didn't exist when your OS was created, and therefore you need to upgrade the OS to work with the newer technology of these devices.
10.6 software is not downloadable. You must purchase a DVD disc. You can order it from the on-line apple store
- http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard.

Getting error System.Web.Services.Protocols.SoapException: Server did not r

I am trying to acces my web service using this code
Call call = new Call ();
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
and i am getting the the following error
Fault Code = soap:Client
Fault String = System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://tempuri.org//EarnNValue.
at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest()
at System.Web.Services.Protocols.SoapServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
Please help.
Thanx
GB

<%@ page language="java" import="java.util.*, java.io.*, javax.mail.*, java.net.*, org.apache.soap.util.xml.*, org.apache.soap.encoding.soapenc.BeanSerializer, org.apache.soap.encoding.*,org.apache.soap.*, org.apache.soap.rpc.*"%>
<%
try
out.println ("Starting");
System.out.println("heree");
Call call = new Call ();
System.out.println("here");
SOAPMappingRegistry soap = new SOAPMappingRegistry();
call.setTargetObjectURI ("http://tempuri.org/");
call.setMethodName ("EarnNValue");
call.setEncodingStyleURI("http://schemas.xmlsoap.org/soap/encoding/");
Vector params = new Vector ();
params.addElement (new Parameter("customer_id", String.class, "gauravbehl",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("channel_id", String.class, "C0002",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("category_id", String.class, "club",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("transaction_date", String.class, "16/07/04 14:41:20",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_id", String.class, "login",Constants.NS_URI_SOAP_ENC));
params.addElement (new Parameter("parameter_value", String.class, "1",Constants.NS_URI_SOAP_ENC));
call.setParams (params);
Response resp = call.invoke(new URL("http://203.199.76.2/api/earnnvalue.asmx"), "http://tempuri.org//EarnNValue") ;
if (resp.generatedFault ())
Fault fault = resp.getFault ();
System.out.println ("Something is wrong");
System.out.println (" Fault Code = " + fault.getFaultCode ());
System.out.println (" Fault String = " + fault.getFaultString ());
else
Parameter result = resp.getReturnValue ();
System.out.println (result.getValue ());
out.println (result.getValue ());
catch (Exception e)
System.out.println ("********Exception*******");
System.out.println (e);
out.println ("Ending");
%>

MBAM 2.5 Web Applications installation - "Web service application pool account is not valid"

Hi,
I've created a Server 2012R2 installation to install MBAM 2.5. When installing the Web Applications I keep getting "The web service application pool account is not valid".
The account I am using is a standard domain account with admin rights on the Server and I've also set the SPN (both netbios and FQDN) and Delegation.
This account is also a member of the group that is defined as RW of the SQL databases (which were setup without any problem and are on a separate Server 2008R2, SQL 2008R2 installation.
I am also getting an error with the SSRS URL , stating "SQL Server Reporting Services URL that points to the MBAM reports is not valid", despite being able to browse to the http://[FQDN]/ReportServer_MBAM location.
Thanks.

I got this kind of error when I revert back my virtual machine a lot to my previous checkpoints. I hope this can't be an issue for you.
Make sure the application pool account must have the following login roles on the SQL server and have following rights on the reporting instance:-
Required SQL Server permissions
The user responsible for installing MBAM database and reporting feature must have the local administrator privileges and the following log in permission:-
SQL Server instance login server roles:
dbcreator
processadmin
SQL Server Reporting Services instance rights:
Create Folder
Publish Reports
SQL Server Database Engine Services: SQL Server Database Engine Services must be installed and running during MBAM Server installation.
SQL Server Reporting Services (SSRS): SSRS must be installed and running during the MBAM Server installation. Configure SSRS in "native" mode and not in "SharePoint" mode.
Gaurav Ranjan

ARIS Web Services enables and ARIS connect in SM

Hi all,
1.How to enable the ARIS Web Services enables in Solution manager?
2.How To connect the ARIS Server to Solution manager?
Regards,Neni

Hi Neni,
Did you get any chance to go through the below links? It will be much appreciated if you could share the effort taken from your end to find the answers so that the team can provide you exactly what you require than giving all!
Prerequisites & steps needed to connect SolMan to the Aris server?
Re: ARIS and Solution Manager
SolMan - ARIS synchronization guide and u201Cbest practiceu201D documents
http://help.sap.com/saphelp_nw70/helpdata/EN/84/da224272eeda2ce10000000a1550b0/frameset.htm
Re: Aris Installation
Rajeev

I have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put

i have developed one website and provied print fuctionality to print entire web from , but it is not printing the web page correctly, even in print preview it is showing wrong out put...

Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. 
http://forums.mozillazine.org/viewforum.php?f=25 
You'll need to register and login to be able to post in that forum.
Make sure you provide the URL for the problematic page, so they can see the problem for themselves.

TS2755 I am trying to send photos to another iPhone user, however, every time I try to send it I get a prompt telling me that iMessage has to be enabled. I go into setting and iMessage is enabled but it will not send the photos in iMessage or otherwise.

I am trying to send photos to another iPhone user, however, every time I try to send it I get a prompt telling me that iMessage has to be enabled. I go into setting and iMessage is enabled but it will not send the photos in iMessage or otherwise.

I have tried to send it to multiple people and keep getting the same response.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success.

I have downloaded the latest Adobe Flash - it says successful but will not work. It says to 'Manage Plug-ins but the Plug-in says it is enabled but it will not work at all. I have tried disabling and then enabling - no success. Please help!

There's two different versions of Flash. The ActiveX version for IE, and the Plugin version for other browsers. Did you install the correct version? This forum's software doesn't thing that Flash is installed for Firefox or the Plugin is disabled.
1.Download the Flash setup file from here: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

Check Proposal is Run but Checks are not Printed-need to cancel the run

The Accounts Payable Check Proposal is Run but Checks are not Printed- I need to cancel the run. How do I do this ?
Points will be awarded.
Thanks.
Kathy

Restart
If the printer stops during printing, for example because of a power failure, you will need to restart
the print program.
1. To do this, choose System   Services   Reporting.
2. Enter the name of the print program (RFFOUS_C) and select Program   Execute.
3. Enter the data identifying the print run and enter the check number from which the
program should be restarted in the Restart field.
4. Select Program   Execute again.
If there is a system crash during the print run but before any checks have been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
If there is a system crash during the print run and some checks have already been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
This error may occur, for example, when a check lot is used up and the next lot has not
been maintained. In this case, the first thing to do after the system crash is to enter a
new check lot. See: Maintaining Check Lots [Page 7]
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
4. Delete the print output from the print management files.
5. Now restart the print program, this time using the restart option, (see above).
PAGE 25 IN CHECK MANAGEMENT PDF FILE FROM HELP.SAP. TO DOWNLOAD CLICK ON BELOW LINK
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-BL-BM-CM.pdf
ASSIGN POINTS IF HELPFUL.

HP Web Services enabled, but info sheet not printing

Similar Messages

Maybe you are looking for