HP Webcam HD 4310

Just bought a new webcam as old one stopped working in skype which is all I use it for.  New one bought and installed today but the webcam is not recognised as being installed.  I am trying it on windows vista on a desktop pc.  I have had an error message appear that states CWindows\system32\avicap32.dll is either not designed to run on Windows or it contains an error.  Try installing the program again using the original installation media or contact your system administrator of the software vendor for support.  I have no idea what this means but am very frustrated that I cannot get this to work at all at the moment.  Any help would be extremely grateful.

Hi there. I can't directly answer your question but I can tell you that I too am having problems with HD4310. Like you, I am using it with Vista Home. The software has installed ok but, the drivers, as listed in Device Manager, are Microsoft from 2006. This seems odd.
I am getting very poor performance from the webcam which was purchased to give better quality than my existing (and still working perfectly,) Logitech Pro4000.
I use ISPQ videochat software. The little self view window works ok for a few minutes and then the frame rate drop to something ridiculous. I can practically wave my hand, but the webcam operates so slowly, it will not see any movement!
I'm yet to try my cam in Skype
I'm a bit stumped as to why a brand new camera is giving such poor performance when an old Logitech soldiers on.
Maybe just try reinstalling the software/drivers to see if it works. Also check if you have the same drivers as me - the 2006 ones by Microsoft. Good luck.

Similar Messages

  • Webcam hd 4310 i burned the dics by mistake help please

    hi i got a webcah hd.4310 for xmass and burned instalation disc by mistake  what should i do please

    Hi Ride1,
    I understand you are missing the software installation disc for your HP HD 4310 Webcam. Here is a link to the software just choose your operating system and click on software.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5273435&lc=en&cc=us&dlc=en&lang=en&cc=us
    Hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • HP HD-4310 Webcam registration not recognised.

    Sorry to double post this, you know how it is when you're running round. 
    HP HD-4310 Webcam
    I buy a product over the counter in the UK and register it with HP, I cannot download drivers as the HP UK site does not recognise the serial number I registered???
    I pay out money but actually get nothing accept 3 hours unpaid work navigating the bloated complexity of "support" ???.

    A predictable response, you get loads of "kudos" for that.
    Where's the button for "No Kudos" then?

  • HP HD 4310 Webcam Sensor

    Hi,
    I was wondering if anyone could tell me the sensor dimensions for the 
     HP HD 4310 Webcam
    they are not quoted in the specifications. If you also know the exact pixel pitch that would be even more helpful.
    Thanks 

    A predictable response, you get loads of "kudos" for that.
    Where's the button for "No Kudos" then?

  • How do I use my gigaware webcam with my mac?

    How do I use my gigaware webcam with my mac? I just bought this webcam on amazon http://www.amazon.com/gp/product/B00IJE0ISS/ref=oh_aui_detailpage_o07_s00?ie=UTF 8&psc=1 and I want to use it with my mac. Is there an adapter or any software to make it compatible? Thanks.

    Your amazon link states, in part, that this webcam is:
    Compatible with Microsoft Windows 7,Vista, XP, 2000
    Use a Mac OS X Compatible Webcam like one of those shown in the linked article instead.
    For best compatibility and security, also update your OS X Mavericks (10.9.2) to the current OS X version by restarting Mac and then downloading and installing OS X Mavericks 10.9.4 Update (Combo).

  • How can I use the webcam on my iPad 2 in the photon app

    I Have an ipad2 and use the photon app to access the webinar training my company provides I have been asked to do some traing but my iPad webcam does seem to work in the app is there a solution to this
    i also have an iPhone 6 if this helps
    many thanks Dot

    Hi Meg
    i use the photon app to access live training i have been asked to do some training and need to know if i can use the camera on my ipad 2 as a web cam  and also how can i set up a microphone within the app
    i cant  seem to find an external device for ipad nor  can i get the photon app to regognise the camera or microphone on my  ipad2
    is there a way to do this please

  • My webcam is no longer recognized by my PC

    Last night I attempted to use my webcam on my HP Pavillion dv7 Notebook PC as usual and it did not turn on. I've looked through all of the forums and I attempted to find it in the device manager as well as scan for hardware changes but nothing turned up. There was no imaging devices section under the device manager at all. I'm just curious how I should fix this and resolve this issue, I want to use my webcam

    Please find the following document that may be helpful:
    http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c02452221
    Regards,
    Deka
    **I work for HP.**Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give a quick thanks.

  • My laptop no longer detects my built in webcam

    I have an HP G60-635DX notebook.   I have a built in webcam which I have used several times before, but now all of a sudden my laptop is not even detecting I have a built in webcam.  What to do?  I have a Mobile Intel 4 Series Express Webcam.  It bums me out.  It is the only way I can talk to my boyfriend face to face while he is out of town and now it is not even working!

    OK, to start with, may I know if you can you check using webcam with Cyberlink Youcam Software & if webcam is listed in device manager under imaging device....
    To get to device manager, follow the below steps:
    Click on the Start button and then choose Control Panel.
    Click on the System and Security icon.
    Note: If you're viewing the Large icons or Small icons view of Control Panel, you won't see this link. Simply click on Device Manager and then proceed to Step 4.
    In the System and Security window, click on the Device Manager link located under the System heading.
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • How I beat the iTunes Error 4310

    This post does not exactly provide a solution to the frustration so many people are encountering when trying to burn a CD from an iTunes playlist, but I did find a way around the problem.  I hope that by posting this I can at least save a few of you some frustration, and at best I can provide some clues that may help Apple fix this seemingly intractable problem.  I've put some time into this and I can tell you a few things up front:  the problem is not caused by drivers for an optical drive or burning at high speed or corrupted iTunes installations or including text in the disk data or any other possible "things to try" I've found on this forum.  The problem lies in iTunes itself and it really needs to be fixed by Apple.
    While running Windows 7 64-bit I found it impossible to burn a CD from a playlist using iTunes.  The burn would try to start and then the process would cancel with the dreaded 4310 error.  After trying and trying and reading forums and trying again, I gave up and replaced my Win7 boot drive with a drive on which I've installed Windows 8.1, which I don't like much at all, but that's a different story.  Whatever, I got the same results with Win8.1 -- 4310 error.  By the way, Win8.1 is also 64-bit. (See where this is going?)
    So I reinstalled my Win7 drive, which I have set up to dual boot.  Yep, I can get to a backup Win7 installation via Windows boot manager, and guess what?  My backup installation of Win7 is 32-bit.  This installation is very bare bones with practically no applications installed, so I can use it as a testbed when I want to experiment without endangering my primary OS installation.  So I booted in 32-bit Win7, went to itunes.com, and installed the latest version of iTunes on my testbed.  Then I imported a playlist I'd saved while running Win7 64-bit, and voila!  I have successfully burned a CD from an iTunes playlist.  Note that this iTunes installation was using a playlist created in an installation of iTunes on a 64-bit system, and it was drawing the exact same audio files from the exact same directories that had failed to burn under Win7 64-bit.
    So I made it work, but it shouldn't have been this hard.  Are you listening, Apple?  Can't you fix this?

    Hi Simon,
    I will try to explain in a better way, what I've done to resolve my problem.
    I'll answer to your questions in the same order you asked.
    - I add movie just dragging and dropping.
    - The main movie is -for me- the one which is more length or important. It probably works with any kind of dvd content you want to replicate. I've done this only for increase the total lenght of the dvd, because I think that this is the nature of this iDvd's bug. I choose the "main movie" because I have no other contents that can be pertaining with my dvd, so, if someone can find its hidden link... he/she only will see the main content of the dvd!
    - When you add the second instance of the "main movie", you will see in the current iDvd page another link with the same title of the movie you have just added. So, at this point, you will probably have two title that are the same. Choose one of them and rename it in iDvd. (I renamed it with "." and hidden over a graphic element which had the same color! I as well delated all its related menus too save time in encoding and not annoying anyone clicking on it).
    Hope this clarify my trick, and sorry for my gapping english!
    Good luck
    iMarc

  • Unable to capture video from webcam in JMF in xlet

    hi
    I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?
    Thanks
    Rajesh

    MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
    Steve.

  • Unable to capture video from webcam in JMF

    hi
    I am unable to capture video from webcam in an Xlet. I am using Xletview to run Xlet. The method CaptureDeviceManager.getDeviceList(vidformat) returns empty array. Which videoformat should I use and why do I get empty array?

    MHP and OCAP only use JMF 1.0, which does not include support for capturing video. You will not be able to do this in any current MHP/OCAP imlementation that I know of.
    Steve.

  • Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

    I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    # dmesg
    [ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3433.781119] media: Linux media interface: v0.10
    [ 3433.809842] Linux video capture interface: v2.00
    [ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
    [ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
    [ 3433.835976] usbcore: registered new interface driver uvcvideo
    [ 3433.835977] USB Video Class driver (1.1.1)
    Unfortunately, *most of the time* the camera seems invisible to my system, and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    (note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
    # dmesg
    [ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [ 480.171097] usb 3-1.3: device descriptor read/64, error -32
    [ 480.341235] usb 3-1.3: device descriptor read/64, error -32
    [ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
    [ 480.578007] usb 3-1.3: device descriptor read/64, error -32
    [ 480.748151] usb 3-1.3: device descriptor read/64, error -32
    [ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
    [ 481.325196] usb 3-1.3: device not accepting address 6, error -32
    [ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
    [ 481.798926] usb 3-1.3: device not accepting address 7, error -32
    [ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
    Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
    I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
    I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
    Anyway, such a hack is unacceptable... So, my questions are:
    is it indeed related to overcurrent protection ?
    is there anything else I can try ?
    should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
    If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
    Last edited by $nake (2014-10-18 16:29:06)

    uname -a
    Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
    pacman -Qi linux
    Name : linux
    Version : 3.9.4-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.9.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65562.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Sat 25 May 2013 16:28:17 CEST
    Install Date : Sun 02 Jun 2013 15:30:35 CEST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • Adobe flash player - webcam bild verpixelt,wenn ich sende

    hallo
    nun ich habe seit etwa einem Jahr ein Problem mit dem Adobe flash player.Bin schon am verzweifeln und hoffe dass jemand hier eine Idee hat was ich noch tun könnte.
    Mein Problem:
    Ich kann mit meinem Adobe flash player ohne Probleme Inhalte aufrufen in deutlicher und guter Qualität. Mein Flash Player wird ordentlich erkannt und in neuesten firefox,internet explorer oder chrome gut wiedergegeben.
    Sobald ich aber mit den flash player meine eigene webcam aufrufe möchte mit einem web browswer wird mein eigenes Bild ordentlich erkannt UND ist sehr verpixelt/undeutlich.
    Mein aktuelles System:
    Windows 7 Home 64bit
    Internet Explorer 9 in 32bit
    Firefox 10
    Google Chrome 16
    kaspersky 2012
    Logitech HD webcam c910
    Many Cam Software ...die neuste version
    Adobe Flash Player 11.1.102.55
    NVIDIA GeForce GTX 560 Ti
    VDSL 50.000 von der Telekom
    8 gb arbeitsspeicher
    Was ich bereits versuchte:
    - in den flash Einstellungen schon alles mögliche ausprobiert..auch die Hardware Beschleunigung aktiviert und deaktiviert.
    Dort fiel mir aber etwas seltsames auf....wenn ich auf mein webcam bild recht klicke und versuche die qualität zu verstellen (steht auf Hoch) sehe ich nicht wirklich ein Unterschied zwischen Hoch und Niedrig..
    - hab kaspersky komplett deaktiviert, Neustart ohne dass kaspersky aktiv war ..ohne Erfolg
    . in den webrowswer alle relevanten Einstellungen versucht ..ohne Erfolg
    - meine logitech webcam ausgetauscht zu Test Zwecken mit einer anderen webcam von Microsoft,weil ich dachte es liegt an logitech
    - Zugriffs Berechtigungen in der windows Registrierung überprüft..alles ok dort ..also wieder ohne Erfolg
    - mein DSL Router ausgetauscht und die Firewall auch dort deaktiviert..ohne Erfolg
    - dass DSL Kabel komplett erneuert..auch wieder ohne Erfolg
    - hatte ich mir einen neuen Computer mit dem aktuellen Betriebsystem angeschafft ( hatte vorher Vista 64bit)..die Installation in Standard gelassen und den aktuellsten flash player installiert weil ich dachte es liege vielleicht an einer anderen Software ....jedoch auch wieder das selbe Problem..brachte kein Erfolg
    - die Grafikkarte wurde ausgetauscht beim PC Wechsel ...und wieder nichts
    - den Adobe flash player mehrmals ordentlich deinstalliert mit Hilfe vom ADOBE Deinstallations Programm
    - mein computer arbeitsbereich nach störenden geräten überprüft
    - die Webcam USB Steckplatz öfters gewechselt zum Test
    - an meinem laptop mit intergriertet webcam und vista 32 bit geht es wie es sollte...hmm..jedoch nicht bei meinen grossen rechner
    Was auch wichtig wäre zu erwähnen, wenn ich meine webcam über die logitech software aufrufe oder der Many Cam Software wird mein Bild glasklar wiedergegeben.
    In skype oder yahoo messenger sehe ich mich selbst auch deutlich ohne verpixelung..meine freunde klagen dor auch nicht über ein deratiges bild wie ich es sehe sobald ich über einen web rowser sende. Mit dem Adobe Flash Media Live Encoder wird übrigens meine webcam auch deutlich wiedergegeben.
    Das eigenartige ist, dass ein neues Betriebsystem und Computerwechsel mit anderer Hardware kein Erfolg brachte.
    Ich googelte bereits wochenlang doch ich fand keine annähernd ähnliches Problem irgentwo.
    Dachte ja auch schon dass es am 64 bit windows sytem liegen würde, doch der flash player ist ja auch dafür inzwischen tauglich. Oder sollte das windows 64bit system von vista und window 7 doch schuld sein ??
    hab' mal zwei snapshoots von einer webcam test seite gemacht, damit ihr das problem selbst sehen könnt.
    Es ist sicherlich kein weltdrama, doch es stört mich und es nervt mich
    Sooo..nun hoffe ich, das irgendwer vielleicht eine zündende idee hat, was da falsch läuft.
    Hilfeeeeeeeeeee !

    Use the offline installer http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player.exe

  • Satellite U400 - the webcam does not work anymore

    Hello guys here is my sudden probloema!
    About a year ago I purchased a laptop
    TOSHIBA - Satellite U400
    with s.o. WinVista 32bit and with integrated webcam chicony etc. ....
    For a year, everything worked correctly, but for some days now, the webcam does not work anymore.
    As soon as I try to open it, a message of management software cam that says "Webcam driver open fail, please restart or computer room"
    I tried to do it all: aggioronato and downloaded the drivers from toshiba, uninstalled the program and re installed the webcam ....! updated bios notebook ....! useless!
    the strange thing .. well that going into device manager ... the webcam is not there ....! but if the launch seems to open just then check quell caz ... Warning!!
    Gan you help me?
    Graziee

    Are you familiar and comfortable with LINUX LIVE bootable discs to load an alternative operating system with unobtrusive but extensive Toshiba device support so you can determine if your webcam hardware is ruined or if the problem is software and possibly solved reinstalling Windows ?
    At this point, you're pondering less time consuming but more expensive choices such as buying another web cam, or another computer and you might be temporarily borrowing someone else's web cam / using a non preferred spare web cam that isn't optimal for your needs.
    Continuously downloading software, registry cleaners, and repeatedly reinstalling drivers will eventually ruin your Windows installation and consume more time than you've wasted so far and still doesn't guarantee to fix your malfunction.

  • After updating to Windows 8.1 the Webcam in my Inspiron is gone and Imaging devices missing in Device Manager

    my webcam in my Dell Inspiron 3521 was working fine with Windows 8.  After updating to Windows 8.1 the Webcam in my computer is gone and the 'Imaging devices' is  missing in the Device Manager.  how can I get the Webcam back? 
    thank you very much.

    I don't see anything specific to your webcam issue but there are a number of Windows 8.1 related drivers listed on the Support site.
    http://www.dell.com/support/home/us/en/04/product-support/product/inspiron-15-3521/drivers
    The Dell Update utility will recommend drivers that are needed specific to your model.
    http://www.dell.com/support/home/us/en/04/Drivers/DriversDetails?driverId=860YD&fileId=3374847033&osCode=WB64A&productCode=inspiron-15-3521&languageCode=EN&categoryId=AP
    Good luck!
    bill
    Regards, Bill Moore @BMooreAtDell

Maybe you are looking for