Hp webcam : How to enable it after refreshing pc

I have the HP envy 15 notebook.I refreshed my pc but after it when i went to the camera app it said that it needs permission for it to be used.The camera app says that you can change it in the camera app settings.
But i do not know how to go to it's setting
It would be helpful if i get an answer in simple numbered steps
Thankyou.

Hello @MaryBeats,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your camera app indicates that you need permission to use it after refreshing your computer. Did you have HP SimplePass protect this application previously? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

How to enable GPU after effects cs6?

I have a Intel HD Graphics 4000 on my macbook pro. How do I enable the GPU if after effects. It should be compatible but how?
Thanks in advance.

As I said, there is nothing that you need to do to enable the OpenGL features. They just work automatically.
Regarding the CUDA feature, the ray-traced 3D renderer: That feature requires CUDA, which is a hardware architecture that your GPU simply does not have. It is an Nvidia technology that is only on Nvidia GPUs.
This is all explained in the page that I lined to in my previous post.
However, you should not concern yourself with the ray-traced 3D renderer. The ray-traced 3D renderer is an obsolete feature that has been superseded by several better ways of doing 3D in After Effects, including using Cinema 4D (which is included with After Effects now):
http://blogs.adobe.com/aftereffects/2013/04/details-of-cinema-4d-integration-with-after-ef fects.html

How to enable JavaScript after downloaded ff25 running on Mac OS 10.8

Since I updated to FF25 I can't enable JavaScript which I need for sites I use.
I have the latest Java 7 version 45 but there is no plug-in appearing for Java.
I added Quickjava 2.0.2 I think this is the version, and clicked to enable java.
But when I visit the sites that require JavaScript I get an error message saying JavaScript not enabled.
When I test the java 'latest version' test from Java's web site using FF java cannot be detected, but it can when I do the same test using Safari.
How do I fix this?
Tx Jo

Type '''about:config''' in URL and enter
* In the search bar, search for '''javascript.enabled'''
* Double click on the '''Value''' to change to '''TRUE'''

How to enable ecoute, after purchasing ITunes Match???????

iTunes never mentioned the fact that if you purchase ITunes Match you can not take advantage of some other applications, such as Ecoute, which I purchased and love. ITunes will not delete ITune Match, as I prefer Ecoute. There is no written statement that ITunes Match negates several other Apps, and after writing to them about this problem, I received a negative and nasty reply.

how can I unsubscribe from itunes match?

How to enable RDS - AFTER installing

I've got CFMX7 already installed and running. I did not
enable RDS when I installed.
But I want to enable RDS now. Is this possible? If so, how?
Thanks.

Todd-Holtmann wrote:
> I've got CFMX7 already installed and running. I did not
enable RDS when I installed.
> But I want to enable RDS now. Is this possible? If so,
how?
Open /web-inf/web.xml and look for the RDS servlet in it. If
it is
escaped, remove the escape markers and restart CF. Then
enable and set a
password for RDS in the Administrator.
Jochem
Jochem van Dieten
Adobe Community Expert for ColdFusion

SSRS - How to enable drilldown after report is already created?

I forgot to check the enable drilldown checkbox while creating a simple matrix report. Is there a way to edit this without creating the whole report again ?

Hi blastoSO,
According to your description, you have created a matrix report without selecting “Enable drilldown” item. Now you want to edit it and make it to be an drilldown report(as you selected “Enable drilldown” when creating). Right?
In Reporting Service, when you create a matrix report with wizard, if you select “Enable drilldown”, it will automatically set each child group can be toggled by its parent group. If you didn’t select “Enable drilldown”, you don’t have to recreate a new
report, the only thing you need to do is set visibility for each child group manually. We have tested this situation in our local environment. You can follow these steps below:
In report design view, click your matrix to select it.
In Row Group pane, right click on a child group, select Group Properties.
Click Visibility tab, choose “Hide” in When the report is initially run, select the parent group from dropdown list in Display can be toggled by this report item.
Repeat step2 and step3 for each child group. Save and preview.
Reference
Add an Expand/Collapse Action to an Item
Best Regards,
Simon Hou

How can I stop auto refreshing a new web page in XP immediately after its opened?

In XP, once I access a new web page Firefox auto refreshes that page once the page is ~80-90% opened - how can i stop this refresh?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

How to enable my Ipad after it has been dissable by too many wrong attempts to enter passcode?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

HT1212 how to enable my iphone after it has been disenabled?

How to enable my iphone after it has been disabled?

You have to restore the iPad in order to unlock it using these instructions.
http://support.apple.com/kb/HT1212?viewlocale=en_US&locale=en_US

How to enable the screen after triggering the error message

Hi All,
we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
if not caufvd_imp-proid is initial.
select single * from t350 into wa_t350
          where auart    = caufvd_imp-auart
            and imord    = 'X'.
if sy-subrc is initial.
    pspel = caufvd_imp-proid.
else.
    call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
         exporting
              input = caufvd_imp-proid
         importing
              output = l_posid.
    concatenate text-t10 l_posid text-t11
                into l_textline1 separated by space.
    message i208(00) with l_textline1.
endif.
else.
message e208(00) with 'Please maintain WBS element in Location Tab'.
endif.
Thanks

Hi,
Instead of error message use status message like
message s208(00) with 'Please maintain WBS element in Location Tab'.
Leave to screen sy-synnr.
This will allow to move to the screen and have in enable mode.
WIth Regards,
Dwaraka.S
Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

How to select all rows in table automatically after refreshing?

Hi,All
After refreshing the table,I want to select all rows,like MultipleButton's function.
How can I do?
Thanks
Smile.

Hi,-Grif-
* Set the selected state for the given row groups
* displayed in the table. This functionality requires
* the 'selectId' of the tableColumn to be set.
* @param rowGroupId HTML element id of the tableRowGroup component
* @param selected Flag indicating whether components should be selected
function selectGroupRows(rowGroupId, selected) {
var table = document.getElementById("form1:table1");
table.selectGroupRows(rowGroupId, selected);
}I don't know that the parameter selected is a boolean,or the checkbox(radio button) id?
Thanks
Smile

How to enable LCD sensor in Satellite C850-B374 after BIOS update?

Hi, friends
I m currently a satisfied Toshiba customer since april 2013. I have been using laptops since 2007 having used various brands I found Toshiba to be good one.
I have recently updated the Bios from 6.0 to 6.50 from the Toshiba service station.
Update was successful and the computer works fine.
But after rebooting the LCD sensor which activates the Power button in this specific model of laptop is not working. After entering the bios setting utility i came to know that ec version is 6 and bios version 6.50 At this point How to enable the lcd sensor to automatically boot while i open the lcd
Ashik

>How to enable the lcd sensor to automatically boot while i open the lcd
You want to boot up the notebook by opening the lid. Right?
In this case you have to enable the option within the Windows 8 system settings
[Why does my Windows 8 notebook start automatically when opening the display lid?|http://aps2.toshiba-tro.de/kb0/FAQ2C03FA0001R01.htm]
You have to look for the option called: +Panel Open - Power On" feature+
This option needs to be enabled in order to boot up the computer automatically when the display lid is open

How to enable reresizing tabs after closing tab?

How to enable reresizing tabs (like in older version than 5) after closing tab without mouseout?

You can use one of these extensions to set a default font size and page zoom on web pages:
* Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
* NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

How to maintain selected row in adf table displayed after refresh

Hi,
I am using jdev 11g
I my jsf page I have a table with multiple rows.
When i scroll and click on one of the rows its selected but if the page is refreshed the row is always selected but not displayed.
I need to be able to maintain the selected row after the refresh of the page, so my table will look like its already scrolled to the selected row..
I tried to use the attribute displayRow="selected" but it won't do the trick.
Any hints
Emile

Hi Branislav,
Kindly answer the following if you may.
Is there a way to refresh the table after the selectListner is fired.
Automatically when i select the table i need to refresh it.
Why after refresh the selected row changes skin.
Regards

How to not getting record in table after refreshing my page?

Hi,
I am using jdev 11.1.1.2.3
My problem is,.. i am performing deleting operation my table for deleting record in that time it is deleted,
But in my problem is after refreshing the page record is coming back.
I am performing delete operation using bindings
can any one help me..
Thank You..

Hi,
Actually i create global components insert delete,commit,first,next these all are icons in my template page
when i am using any master table click on those icons i perform operations
for bindings
insert:#{backingBeanScope.AdminCountryBean.addNewCountry}
savecall:#{AdminMainActionBean.pofAdminAction}
cancelcall:#{bindings.Delete.execute}
For inserting and saving i write bean class deleting i am not following any programmatic approach....

Hp webcam : How to enable it after refreshing pc

Similar Messages

Maybe you are looking for